Live Value! problems AGAIN

Hello, and im here again heh,
my soundblaster li've has , as long as i've known soundcards, given me issues driver wise
i dont really know how to explain, i just know that errors always pop up, its just the way it is, right now i installed the disc, and updated through the driver page through the UK creative drivers site, and now Emu0kx Audio (df80) -- i did this because someone mentioned it would work and it did before
but now, firstly i have no stereo mix or (what you hear) in the recording and the programs creative provides such as creative surround mixer gives errors such as "CtDevcon.dll has returned an error. mixer will now exit"
or.. creative audio hq "cannot initialize audio driver. reinstall audio driver"
when i bought this card, it was top of the line, and it hurts me to know that im havin such issues
could someone link me to a driver that actually works fine, or some help? thanks

Hi!
1. There will be "standoffs" used to keep the motherboard free from the chassis - only 6 of them should be used and only on the places where the screws are. Other standoffs may be in contact with the mobo in places where they should not be an they may short (parts of) the board; this is a quite common reason for having problems with sound. When you return home, please check that there are only 6 of these standoffs used.
2. I f the SB card worked in your old computer we will assume that it is ok.
3. 300W is not much ... At least some of the 300W PSUs on the AOPEN site will only deliver 14A on the 3.3V rails and that might be a bit short ... Bas wrote that he is aware of problems with AOPEN PSUs also. I recommend that you first look into this possibility.
Good Luck! )
Hans

Similar Messages

KT3 ULTRA2B + SB Live Value problems

How can i get SB working with KT3? Computer doesn't boot with SB. I have tried every PCI-slots and disapled AC97 but computer doesn't boot! Without SB it works just fine!

Hi!
1. There will be "standoffs" used to keep the motherboard free from the chassis - only 6 of them should be used and only on the places where the screws are. Other standoffs may be in contact with the mobo in places where they should not be an they may short (parts of) the board; this is a quite common reason for having problems with sound. When you return home, please check that there are only 6 of these standoffs used.
2. I f the SB card worked in your old computer we will assume that it is ok.
3. 300W is not much ... At least some of the 300W PSUs on the AOPEN site will only deliver 14A on the 3.3V rails and that might be a bit short ... Bas wrote that he is aware of problems with AOPEN PSUs also. I recommend that you first look into this possibility.
Good Luck! )
Hans

Which shoul i use? realtek alc 650 or sb live value?

yah i haven't found any decent comparisons or reviews that pit these two sound controllers together and i'm hoping that someone could possibly answer this for me . . .
i have the soundblaster live! value card and there's the realtek alc 650 sound controller on my mobo . . . which one of these two do u guys think is better to use?
can someone compare the two? like which one uses more cpu load, sound quality, etc . . .

Yes ... I am having problems having sound in my video capture ... I downloaded the new SB Live drivers for XP and I found the extraction in my one of the local settings folder. I've tried different ways to acquire sound in my video captures.
I switched back to the SB Live Value card a few hours ago.
I've got sound now but kind of hit and miss.
I use a Maxtor ATA 133 card and have four ATA 133 60 GB drives sitting on the bottom of my tower. Plus a 40GB and 60GB mounted normallly. I do use the KT4V-L mobo and the XP 2500-Barton.
HP 9100 cd writer and Sony DRU-500a DVD Burner.
I'm using the LAN on board for DSL.
FANS: One is mounted in back ... I cut the holes out to increase air flow.
Another fan is mounted on side panel ... shooting outside air towards my CPU.
RAM is one stick of Kingston KVR333X64C25/512 DDR Ram
BIOS setting is FSB 166 setting.
System - Mouse hasn't froze up yet ... when it does happen I usually here a small faint sound ... "ping"-"poing" and then the mouse is moves again. Audio and video playback is also affected when this happens.
I've changed my swap file to one of my 60 GB ATA 133 drives only. Setting is 1000 MB and C-Drive is not included.
I'm really frustated with this freezing up problem. I've got too many new parts to figure out what is wrong.
WIN XP - KT4V-L MOBO - and new DDR ram are all installed in same time period.
Any suggestions?? ... Mouse hasn't froze up yet after changing Swap file settings.
Have you been to the Black Viper website ???
What do you mean by "Surround Mixer 2" are you refering to the baby blue mixer I saw a few days ago. I liked the old mixer more.
Quote
Originally posted by Meseriashu
Realtek alc 650 looks impressive - has all the enviroment efects that SB Live! has, six channels output, support for EAX and all. But there is a diference: while your Value SB Live! does have a big support in hardware for them, the realtek onboard sound is very software depending. And the quality of the effects is incomparable. And there are the SoundFonts that you can use. Did you try your SB Live! with the XP drivers (with Surround Mixer 2)?
Someone said about not beeing able to run 3dmark03 sound test with the realtek - right! the SB Live! has 32 hardware voices, can take a much more number of audio inputs (if you have some 5Ghz CPU u can run about 32 winamps at the same time ).
Hmm but you have a VIA... that has problems with SB Live!
I have also, but only in 9x, in XP is working smooth.
About the latency - you can get very close to real time if you install the ASIO drivers but the KK Mixer sucks.
Go Creative ) Still awaiting my Audigy 2 Bulk...

Give Dynamic Text value problem

Hello again,
Currently I'm having another problem with AS3. I have 1
Scene, 2 Movie Clips. 1 Movie Clip is placed on the main Timeline,
whereas the other is placed within that Movie Clip. I create a
TextField with the instance name "question" in the 2nd Movie Clip.
I have Actionscript on the first frame of the main Timeline; in the
code, I add a value to the above mentioned TextField with this line
: 'mc1.mc2.question.text = "1" '. I test the movie but it doesn't
work, the TextField is still blank.
However, if I add the value to the TextField within Movie
Clip 2, it works.
There's no error or warning from debugger. Please help me.
Thank you!

um...thanks for your advice.
Btw, Alpha doesn't work with Graphic Symbol that contains
Textfield?
Let me explain my problem again.
What I want to do is I want to add a value to two Textfields
(same instance name) with actionscript. I have a Movie Clip, and
inside that Movie Clip, I add a blank textfield. The MC is on the
main Timeline's first frame, the textfield is on the first frame of
the MC's timeline. the second textfield is on the 30th frame of
that MC. MC stops at the beginning. So, on the main Timeline, I add
value to two textfields with the same instance name (
mc.textfield.text = "1"). The first Textfield is "1" but the second
is blank. I had done this before and it worked, but now...
I hope it's a bit clearer. Thank you!

Discard Submitted Values Problem

I have a problem with a form in my webapp. First of all, I have checked out the virtual forms tutorial and the CRUD tutorial for the use of discardSubmittedValues and I am having a problem understanding how this works. I have Form that submits info to database and updates DB correctly. There are 2 buttons for form 1 that updates DB and has alot of code that is working fine so I won't post it. The other button is a simple Reset button that clears all input fields on page and calls discardSubmittedValue (I have tried both discardSubmittedValue for each input and discardSubmittedValues for virtual form) it clears the inputs like it should, but my problem is that if I navigate to another page and come back to page with form - the values are again in the inputs. I have REALLY tried to study the JSF Lifecycle - but I am a newbie and this is going to take me a while to get good at dealing with it. Here is the button click...
public String button2_action() {
        // TODO: Process the button click action. Return value is a navigation
        // case name where null will return to the same page.
        form1.discardSubmittedValues("addPost");
        textField1.setText("");
        textArea1.setText("");
        return null;
    }From what I understand about the lifecycle this is a post back and I think the values are being set in Restore View Phase (*From Programmers Guide), but again I am new and I am more than willing to do the legwork to find out solutions to my problems. If somebody could just set me in the right direction...I would appreciate this.
Also I am not saying this is a bug, in fact I am sure that it isn't a bug in the app, but a bug in the way I am coding it.
*Excerpt from Programmer's Guide (Am I on the right track?)
� Restore view phase�The restore view phase performs the following tasks:
n If a UIViewRoot exists in the FacesContext:
� Sets the locale on the UIViewRoot.
� For each component in the UIViewRoot, if component instance binding is
used, calls the setValue method on each binding.
� Processing ends for this phase.
n If no UIViewRoot exists for this FacesContext, then this phase derives a
view identifier. If it cannot determine a view identifier, it throws an exception
and processing ends for this phase.
n Calls viewHandler.restoreView with the derived view identifier to get the
UIViewRoot. If no UIViewRoot can be found, creates a UIViewRoot.
n Stores the restored or created UIViewRoot in the FacesContext.
n For each component in the UIViewRoot, if component instance binding is
used, calls the setValue method on each binding.
Is this where my problem is? Do I (or can I?) stop the setValue method from being called. Or am I looking at the wrong place in the Lifecycle?
Thank You In Advance For Your Consideration
Jason
Edited by: jasonwpalmer on Nov 3, 2007 4:23 PM

Well this is a day of debugging I'd rather have back.
With a form of Rubber ducking my colleague helped me notice that the number of items being displaced was equal to the number of page zero item I added recently.
These items were placed in my menu region, which happens to be region position 7.
I had commented out a section of my page template

but this content was obviously still being generated.
At some point during the page submission, this disturbed what apex was doing - somewhere these 'duplicated' yet commented field definitions were causing apex_application.accept to store the values in locations offset by the four P0 items.
I often look to page zero for potential causes to strange issues - but this one initially beat me.

Performance Problem Again

Hi all,
We are encountering performance problem again
The batch process deletes 1M rows every night which took 30mins the usual.
But last night (12AM) it took more that 2hrs and hangs.
Does it help if I run gather_schena stats regularly when there is constant DELETE on the table?
Please help me check our ASH, AWR, ADDM to resolve the issue.
ADDM
https://app.box.com/s/7o734e70aa2m2zg087hf
ASH
https://app.box.com/s/xadlxfk0r5y7jvtxfsz7
AWR
https://app.box.com/s/x8ordka2gcc6ibxatvld
Thanks....
zxy

Hi ARM,
***What is the SGA_TARGET or MEMORY_TARGET that the database is running on?
Our server has 8Gb Physical Memory and 8Gb Swap.
What is the ideal SGA_TARGET and MEMORY_TARGET shouldbe?
Our current setting is:
========
SQL> show parameter memory
NAME                                 TYPE        VALUE
hi_shared_memory_address             integer     0
memory_max_target                        big integer 5936M
memory_target                                big integer 5936M
shared_memory_address                 integer     0
SQL> show parameter sga_
NAME                                 TYPE        VALUE
sga_max_size                         big integer 5936M
sga_target                               big integer 0
Thanks

Drivers needed for Sound Blaster LIVE VALUE - Model 4780

I had to move my SB Live Value card model 4780 S/N 4780210008722, to another computer and require new drivers for the SB card which has a gaming port.
I have a 3.0 gig IBM Think Center box using Windows XP SP2.
I tried the DOWNLOAD area Creative provided but found the information very confusing as to what drivers and patches to download. First it said to download except if I did not have the original installation drivers (which I don't have), but then it says to download the drivers as an upgrade.
Again, they don't address clearly what I should download for a basic installation which includes use of the game port for use with flying type software. I have 2-3 joysticks consoles i'd like to use on my newer computer using the CT 4780 SB card.

Look at your Private Messages on the top of the site.

Rounding off value problem in sales order

Hi All,
This is related to a rounding off value problem in sales order.
The problem is described by an example which is as follows -
Selling Price of Material A = Rs. 176.76
Excise charged = Rs. 21.80
Total Price = Rs.176.76 + Rs.21.80 = Rs. 198.56
On this total Trade Discount (ZDTD) having access sequence,is calculated at the rate of 4% = Rs. 7.94
But the condition base value after the discount is showing Rs.198.60 instead of Rs.198.56
I want the system to reflect the value as Rs.198.56 intact and it should not round up to the nearest value i.e. Rs. 198.60
Why is this happening? Is it possible to reflect the exact value? If yes what is needed to be done?
The commercial round off is activated for the DIFF Condition Type.
Looking forward to some valuable suggestions.
Thanks & Regards
Priyanka Mitra

Hi Ramesh,
Thanks for your suggestion but the problem has been solved by me.
Regards
Priyanka Mitra

The same problem again with HP Simple Pass fingerprint reader after upfrading from Firefox 4 to Firefox 5. I have already installed HPSimPlePass 7.0.74.0 to fix the problem after upgrading to Firefox 4.

I have a HP Pavilion dv6 with a fingerprint reader. I had the same problem as many other people when upgrading to Firefox 4, : I couldn't use the HP Simple Pass to enter a website needing a username and password by just swiping my fingerprint. I fixed the problem by downloading the new HPSimPlePass 7.0.74.0. This fixed the problem and I was very happy. Since upgrading to Firefox 5 I have the same problem again, but I already have the new version of HP Simple Pass. How can this be fixed so that I can use this fingerprint scan feature again, or where can I download Firefox 4 again?

''FredMcD [[#answer-709783|said]]''
<blockquote>
The programers know of this and are working on it.
</blockquote>

Audio Render Problems Again

I'm having problem again rendering a one hour presentation. If I use Command/R, the dialog box indicates seven or more days. If I highlight the selection I get essentially the same estimated time.
Command/R usually works, but not this time. Audio For Playback is checked.
The DV timeline plays in Quick Time OK.
I desperately need to get this video sent out! I even deleted preferences using the "Preference Manager" program.
David

All of my lecture video series are recorded in LP 16 bit audio. Each lecture is between 1 to 1.5 hr in length. I have successfully completed 10 of the 23.
Each lecture is sent to iMovie HD and then the timeline.mov is placed into FCE. One other time the timeline audio would not render, so I converted it to DV via MPEG Stream Clip and placed it back into FCE. The lecture I'm having trouble with is #11.
As mentioned, usually Command-R will do the trick in 10 minutes or so, not 6 to 10 days.
David

Explorer problem again????

I got explorer.exe problem again,which was solved previously by creating new user account.I am free from problem for around 1 month and started again, and this time very frequently i am getting windows with message that
"Windows Explorer has stopped working".I am using windows 7 professional service pack 1.Please any body give permanent solution to this problem,Problem details are below
Problem signature:
Problem Event Name:    AutoVerifierV2
Application Name:    explorer.exe
Application Version:    6.1.7600.16450
Application Timestamp:    4aeba271
Fault Module Name:    verifier.dll
Fault Module Version:    6.1.7600.16385
Fault Module Timestamp:    4a5bdb2a
Exception Code:    80000003
Exception Offset:    0000c0de
Status Code:    201
OriginalBucketID:    0
OS Version:    6.1.7600.2.0.0.256.48
Locale ID:    1033
Additional Information 1:    e903
Additional Information 2:    e90395e1c160c582c0a3c5e6d36ee788
Additional Information 3:    f03b
Additional Information 4:    f03b4ab77c5a1d7b156e29c2436e59a6

Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Hello Mans and Womans! I live the problem to my iphone.While I was updating firmware update(my iphone is iphone 3G iOS 4.1.2) 4.2, the iphone gave an error(1015:error type).And now, the phone be rescue mode.I tried a lot of method, but ı didnt succesful

Hello Mans and Womans! I live the problem to my iphone.While I was updating firmware update(my iphone is iphone 3G iOS 4.1.2) 4.2, the iphone gave an error(1015:error type).And now, the phone be rescue mode.I tried a lot of method, but ı didnt succesful it.Please help mee!!

You can try putting the iPhone into DFU mode and see if that will let you restore and remove the jailbreak:
http://osxdaily.com/2010/06/24/iphone-dfu-mode-explained-and-how-to-enter-dfu-mo de-on-your-iphone/
Some jailbreaks cannot be removed and in some cases will permanently disable your iPhone. If that happens to you, then you will have to buy a new iPhone; Apple will provide no support, warranty or out-of-warranty, for a jailbroken iPhone.
You're on your own from here. We can provide no further help with a jailbroken iPhone in these forums.
Good luck.

Why am I having update problems again?

When I started Muse today I received a message that there was a new update and did I want to install. I said yes and it proceeded, when complete I received this pop up message:
Title, Adobe AIR - "Intial content could not be loaded for this application. Try re-installing or contacting the publisher for assistance".
But you can't re-install because it shows it's already installed. This happen to me a month ago and I had to un-install Muse & reboot before I could re-install.
Why is this happening? Is there a way I could open up Muse without going through a un-install again. This only happens with Muse updates which occur when starting Muse, other Adobe updates that take place through the Creative Cloud control panel are fine.
I just tried again, same problem

Help Again.
My computer just doesn't like Muse & apparently CC programs. After all this time when starting Muse I have been ignoring the message to update because I'm afraid if I say yes I will have the above problem again. Today I got brave and said yes and Muse would not open again!
So I returned to this site and used the link you gave me before to reinstall Muse, when it finished it told me that there was a newer version 7.4 available and would I like to install it and I said yes, and it seemed to work and opens fine.
I also had a request to install the latest update of Creative Cloud so I said yes. Everything went fine. I got really brave and I noticed that there was a newer version of Muse CC 2014 and I installed it but now that CC and other CC programs tell me I need a sign in with my adobe ID to try a 30 trial, if I press the License This Software button it asks me for a Serial Number. Why can't I open CC programs without a serial number, I am a Creative Cloud member? I have 2 Icons on my desktop, Adobe Muse.exe which works and Adobe Muse CC that tells me I need a serial number.

My Iphone Has a Restart Problem Again and Again wot To do?

MY Iphone Has a restart problem again and again wot to do please tell me

Basics from the user guide are restart, reset, restore from backup, restore as new. If you go through ALL of those steps and you still have issues, you need to get your phone checked out by Apple.

A dns problem again?

I sent email to [email protected] but the engineer there said he did not receive it. Also, I did not receive the email he sent to me through his sun.com email. it sounds a dns problem again.
I have changed our mx record to:
@ IN MX junk.domain.com.
before, it was:
@ IN MX junk ==>would this cause dns problems?
Here is the entry in the mail.log which seemed that sun has received my email successfully:
09-Dec-2005 09:39:10.59 tcp_local D 2 [email protected] rfc822;[email protected] [email protected] dns;btmx1.sun.com (relay1.sun.com [IntraStore TurboSendmail] ESMTP Service ready) smtp;250 recipient <[email protected]> OK

Your log shows that Sun did indeed receive your mail.
Sun's mail infrastructure has been under DOS attack for some days. Sometimes that's caused delays of up to several hours for inbound mail to get to us.
We also have had some virus infected systems pounding our servers. More delays.
We do contract with an external company to scan for spam/virus scanning. Those folk historically have lost us some mails, too.
Your MX record isn't likely to make any difference in you sending out mail, but in your ability to receive mails, yes.

Live Value! problems AGAIN

Similar Messages

Maybe you are looking for