LiveCycle messing up my php dataservices ?

Hey
Is it possible that the livecycle model file .fml is messing up my php data services that i have made with the wizard ?
i deployed the php files into test server and changed the destination url in these service .as files to point to the test server gateway.php but somehow it still connects to the localhost that i have on my laptop.
But once i investigated the .fml file and changed the url in there, the services started working again and connected to the test server gateway.php file.
Is this a bug ? Can i somehow force the new address to the services or do i have to always change the url by hand ?
Cheers.

Hi,
Any *.fml changes updates service code also. If you want to change endpoint or destination, override their values in the subclass of _Super_Servicename.as inside constructor. If you are using Burrito you can override preinitialize() method for such cases.
-Radhakrishna

Similar Messages

Horiz Menu Bar (in a template) Messed up on PHP page; Only in IE Browser

I have redesigned a fairly large website for someone (I'm using DW CS3) and I developed a template which includes a Spry Horizontal Menu Bar. The menu bar was working fine on all of the HTML pages. As I come to the end of my project, I have created a PHP page (using my template with the horizontal menu bar) because I have included a PHP script for an Events Calendar (ComDevWeb). Ever since I added the includes for the calendar, the horizontal menu bar gets messed up when viewing the page with IE. The menu bar looks fine on all of the other html pages. The menu bar on the PHP page also looks fine when I view it with Safari or Mozilla. Since the menu bar is in the template (that will affect every other page that is working just fine), I'm not sure how to proceed with my troubleshooting.
Here is the website: www.ourtruecolors.org/newsite
Here is the PHP page with the calendar (where the horiz menu bar appears messed up in IE, but looks fine in Safari & Mozilla browsers): http://www.ourtruecolors.org/calendar/index.php
Any help or suggestions would be greatly appreciated.

I have redesigned a fairly large website for someone (I'm using DW CS3) and I developed a template which includes a Spry Horizontal Menu Bar. The menu bar was working fine on all of the HTML pages. As I come to the end of my project, I have created a PHP page (using my template with the horizontal menu bar) because I have included a PHP script for an Events Calendar (ComDevWeb). Ever since I added the includes for the calendar, the horizontal menu bar gets messed up when viewing the page with IE. The menu bar looks fine on all of the other html pages. The menu bar on the PHP page also looks fine when I view it with Safari or Mozilla. Since the menu bar is in the template (that will affect every other page that is working just fine), I'm not sure how to proceed with my troubleshooting.
Here is the website: www.ourtruecolors.org/newsite
Here is the PHP page with the calendar (where the horiz menu bar appears messed up in IE, but looks fine in Safari & Mozilla browsers): http://www.ourtruecolors.org/calendar/index.php
Any help or suggestions would be greatly appreciated.

Flash Builder Mobile PHP Publishing

I have zend server community edition running on my Mac. I have created a Flex Mobile and PHP Project using localhost as the Root URL and htdocs as the Web Root. After that, I have connected to a couple of php dataservices to my SQL database in Zend and added my components to view and change the data.
When I test the app locally, everything runs perfectly, which is awesome. However, the time has come to publish to my mobile phone and I would like to connect the app to a mirrored database on my web server so that I may use it online rather than local and this is where I cannot get it to work. I assume I would have to change the php database connection properties, but no luck.
Does anyone know what settings/code I must adjust in order to get my app to talk to my sql database hosted online?

Hello Skant,
I did get Flash Builder working using a remote database, but used a HTTPService request instead on cofiguring Zend. It looked like this:
<s:HTTPService id="saveHole1Score" url="http://yourdomain.com/your.php" useProxy="false" method="POST">
                              <s:request xmlns="">
                  <scorecard_id>{scorecard_id.text}</scorecard_id>
                  <hole1post>{hole1post.text}</hole1post>
             </s:request>
</s:HTTPService>
However, I eventually gave up on Flash Builder as a method to build my mobile app because the published version for iOS of my app was 29MB, which is too large to download over the cellular network. This was problematice for the type of app I was creating. Plus with the announcement of the lack of ongoing support for Flash Builder was the cherry on top. I have since switched to HTML5 and Phonegap to publish my apps. So far it has made a better product and significantly lighter.
Good Luck with your app.

High Score Table: Writing a Simple Text File with Flash and PHP

I am having a problem getting Flash to work with PHP as I need Flash to read and write to a text file on a server to store simple name/score data for a games hi score table. I can read from the text file into Flash easily enough but also need to write to the file when a new high score is reached, so I need to use PHP to do that. I can send the data from flash to the php file via POST but so far it is not working. The PHP file is confirmed as working as I added an echo to the file which displayed a message so I could check that the server was running PHP - the files were also uploaded to a remote server so I could test them properly. Flash code is as follows:
//php filewriter
var myLV = new LoadVars();
function sendData() {
//sets up variable 'hsdata' to send to php
myLV.hsdata = myText;
myLV.send("hiscores.php");
I believe this sends the variable 'myText' to the php file as a variable called 'hsdata' which I want the php file to write into a text file. The mytext variable is just a long string that has all the scores and names in the hiscore. OK, XML would be better way of doing this but for speed I just want to get basic functionality working, so storing a simple text sting is adequate for now. The PHP code that reads the Flash 'hsdata' variable and writes it to the text file 'scores.txt' follows:
<?php
//assigns to variable the data POSTed from flash
$flashdata = $_POST["hsdata"];
//file handler opens file and erases all contents with w arg
$fh = fopen("scores.txt","w");
//adds data to file
fwrite ($fh,$flashdata);
//closes file
fclose ($fh);
echo 'php file is working';
?>
Any help with this would be greatly appreciated - once I can get php to write simple text files I should be ok. Thanks.

Thanks for your help.
I have got Flash working to a certain extent with PHP using loadVars but have been unable to get flash to receive a variable declared in PHP. Here's my Flash code:
var outLV = new LoadVars();
var inLV = new LoadVars();
function sendData() {
outLV.hsdata = "Hello from Flash";
outLV.sendAndLoad("http://www.mysite.com/hiscores/test23.php",inLV,"post");
inLV.onLoad = function(success) {
if (success) {
//sets dynamic text box to show variable sent from php
statusTxt.text = phpmess;
} else {
statusTxt.text = "No Data Received";
This works ok and the inLV.onLoad function reports that it is receiving data but does not display the variable received from PHP. The PHP file is like this:
<?php
$mytxt =$_POST['hsdata'];
$myfile = "test23.txt";
$fh = fopen($myfile,'w');
//adds data to file
fwrite($fh, $mytxt);
//closes file
fclose ($fh);
$mess = "hello there from php";
echo ("&phpmess=$mess&");
?>
The PHP file is correctly receiving the hsdata from flash and writing it to a text file, but there seems to be a problem with the final part of the code which is intended to send a variable called 'phpmess' back to Flash, this is the string "hello there from php". How do I set up Flash and PHP so that PHP can send a variable back to Flash using echo? Really have tried everything but am totally baffled. Online tutorials have given numerous different syntax configurations for how the PHP file should be written which has really confused me - any help would be greatly appreciated.

Mysql select statement where = works and LIKE fails

I am using Flash Builder 4. On the server side I use php and mysql. I created a php dataservice using FB4. My plan had been to allow users to enter a search term and query the database using a "LIKE" statement. FB4 created the php code that I simply modified changing the parameter name. The input parameter is a string.
public function getT_caseByID($searchTerm) {
$stmt = mysqli_prepare($this->connection, "SELECT * FROM $this->tablename WHERE (title = ?)");
$this->throwExceptionOnError();
mysqli_stmt_bind_param($stmt, 'i', $searchTerm);
$this->throwExceptionOnError();
mysqli_stmt_execute($stmt);
$this->throwExceptionOnError();
mysqli_stmt_bind_result($stmt, $row->idt_case, $row->title, $row->id_author, $row->comments);
if(mysqli_stmt_fetch($stmt)) {
      return $row;
} else {
      return null;
A look at FB4 shows this code returns data.
This code works fine but if I make the below change it fails, even when I use the wildcard %. the only change is "=" to "LIKE".
public function getT_caseByID($searchTerm) {
$stmt = mysqli_prepare($this->connection, "SELECT * FROM $this->tablename WHERE (title LIKE ?)");
$this->throwExceptionOnError();
mysqli_stmt_bind_param($stmt, 'i', $searchTerm);
$this->throwExceptionOnError();
mysqli_stmt_execute($stmt);
$this->throwExceptionOnError();
mysqli_stmt_bind_result($stmt, $row->idt_case, $row->title, $row->id_author, $row->comments);
if(mysqli_stmt_fetch($stmt)) {
     return $row;
} else {
     return null;
A look into FB4 shows "void".
Any help would be appreciated. I am using localhost on Apache Server on a development computer with Windows XP.

correctio0n on the select statement
select statement code*********
select
    apspnr astspr aobjnr apspid
    bpsphi bposid
    caufnr cpspel
    dinact dstat
    eudate eusnam eutime "estat
   F~TXT04
    g~estat
    G~TXT04
    into corresponding fields of table itobj
    from proj as a
    inner join prps as b on apspnr = bpsphi
    inner join aufk as c on bpspnr = cpspel
    inner join jest as d on cobjnr = dobjnr
    inner join jcds as e on dobjnr = eobjnr
                         and dstat = estat
    inner join tj02t as f on estat = fistat
    inner join tj30t as g on astspr = gstsma
    for all entries in itparm
    where apspid = itparm-pspid "or estat = itparm-psy )
    or bposid = itparm-posid "or estat = itparm-wsy )
    or caufnr = itparm-aufnr "or estat = itparm-nsy )
    and ( dinact 'X' or einact 'X')
    and fspras = 'E' and gspras = 'E'.

DW CC Displaying Duplicate Stylesheets

Dreamweaver has started showing duplicate stylesheets for every one that I create. When I select the duplicate one it gives me the "...is not on the local disk. Get" dialog. Every time I create or add a new css doc to the site it automatically creates/shows a 2nd "...not on the local disk" version. See the screen cap for more info. The image is of a brand new site (hardly any html or css yet) but you can see how it's showing duplicate stylesheets in the stylesheets list up top. There's only one version of each stylesheet linked in the html, and in the local files folder, but it seems to think it's supposed to be finding another one on a remote server.
It seems to be treating the site like a PHP doc. I was recently messing around with PHP using Mamp to create a local test server and I'm afraid that's messed something up. I don't remember all the settings I changed when setting up a Mamp but as far as I know they were within the Server settings for each site so they should be local to each. I don't know of anything I'd changed to cause this.
Can anyone tell me what's going on?
Any help is appreciated.

Sounds like your preferences became corrupt, it happens.
Keep the instructions on how to clear the program cache and restore preferences handy. Those two steps will take care of a lot of "just started happening" problems in DW...
Deleting a corrupted cache file
Restore preferences | Dreamweaver CS6, Dreamweaver CC

FLASH Motion/Events (6)

1. How to make hotspots?
2. How can you jump to another page or scene when you click
something?
3. Loop animations?
4. Timing animations with triggers (e.g. a loading bar
lasting only the duration for loading)
5. Mouse hoover effects
6. How to make objects disappear or appear upon clicks.
I've messed with HTML & PHP for sometime now, but today
though I messed with flash for the first time. I ran into 6 issues.
I figured out keyframing, motion, and fades. Any help on
these?

I suggest you begin by reading the wealth of information on
these basic concepts in the Flash Help Manual (F1) where you will
find these answers and much more than you will be able to read over
the next year or so...
1) read about movieclips and buttons
2) see #1, understand the timeline and the gotoAndPlay()
method
3) all timelines loop by default, and see #3
4) read about the Tween class ...
4a) preloaders are a whole other animal, you will need the
basics before working with external loading
5) see #1, an infinite number of ways only limited by your
imagination
6) see #1, again, many methods to achieve this type of
action

Is there a way to layer this a .png continuously?

I did a test page to see if the png file would layer on the main banner on this page
but it didn't. I know with css you can position an image negatively, but I don't know how to do that without messing up the php layout. I just want the fire .png image to layer continuously (and with the feather I created) so that regardless of the monitor, the fire will be there.

I don't think that you'll ever get that background fire image to repeat the way that you want it to.
The only way around it that I can see would be to make the background image longer than you need and have no repeat and position it precisely to fit the HTML image.
Martin

HTTPService - GET and POST in Flex

I'm sending JSON data to a PHP script on the server, and I'm a bit new to the server side stuff so I'm hoping you all can answer a few questions.
1) I thought using POST was more secure than GET, as GET sends parameters with the URL, but when I send by post, spaces are replaced with %20, so is my data really being sent by POST, or GET?
2) I thought I had heard that under certain conditions you might send data by POST, but due to a bug Flex actually sends the data by GET. What are the conditions under which this happens?
3) How can I send usernames and passwords using HTTPS in Flex using HTTPService. I assume I should use HTTPS as it is supposed to be secure.
4) I've been messing around with PHP to process the data on the server, but quite frankly, working with PHP seems really difficult. I get the data, a PHP print says its an object, but object notataion -> => does not seem to work. I've used PHP methods to get the object "keys", and also done a little with processing PHP arrays, but it still seems like PHP does not make it easy on you. Anything better for more easily transferring data securely between Flex and MySQL?
Thanks very much in advance!
Greg

Hi Greg,
What build of Flex are you using?
1) When using HTTPS the GET URL would also be encrypted, but once decrypted on the server the URL might be logged so it's suggested to not use GET for transmitting credentials.
In 3.x, the default contentType is application/x-www-form-urlencoded - but what happens to your data depends on the type of the params passed into HTTPService.send(). Are you constructing a JSON request as a String?
BTW, did you try to set a contentType? I looked at the 3.x SDK source in SVN and the HTTPService contentType property still has metadata which provides code insight in the IDE but it also restricts the values of . When toString() is called on this XML node the root node is unwrapped and the empty string content returned. To avoid this toXMLString() can be called on the XML node to get the entire XML representation.
3) Load your SWF via HTTPS and use also HTTPS to send your credentials to the server and establish a session. If you tried to use a Basic Auth challenge you'd have to rely on the browser authentication dialog as you can no longer preauthenticate using an "Authorization" header as it is on the list of headers not allowed by flash.net.URLLoader. See the docs for URLRequestHeader used to configure headers with URLLoader:
http://livedocs.adobe.com/flex/3/langref/flash/net/URLRequestHeader.html
As for how to send custom credentials... I think if you can solve your issue in 1) then the rest is up to what you want to do on the server. There should be lots of PHP login examples out there too. As a best practice try to delete / null out credentials variables when they're no longer in use on the client or server. Even though you're using HTTPS, consider additionally Base-64 encoding the credentials (for example, you could copy the format of the HTTPS Authorization header with a single "username:password" string) to obscure them in the event that a clear text version of the request is logged, or viewed in a debugger, etc.
Pete

Populate Livecycle PDF from mySQL database using PHP

I'm trying to set up a database of loan agreements, where users will submit a form through Acrobat and their information will be stored in a mySQL database. Later, they can go back and download the PDF, which will be repopulated with their data in the mySQL db.
I made the form in Livecycle Designer and submit the information through HTTP POST. I can easily get the information from the form into the database...my only problem is getting that information back out into the PDF.
What would allow me to write back to the PDF, preferably using PHP? What kind of syntax would that require?
Thanks!

I have a vital form that clients fill out, which is passed to many people in the company along the workflow. The form is a Planner and we have in the following PDF, Word Doc..
Well before, the Planner.pdf was originally created in Word, since most people have access to Word.. but evolved to a PDF form created from the Word Doc via Adobe LiveCycle Designer 8.0 w/ User Rights enabled so that the form could be filled out and saved using Adobe Reader.. which was a step better than Word.. being that it is free. But this needed to be easier and more to the point b/c some clients don't particularly like installing the latest version of Reader, even if you provide them the link. Nor do they like saving the form, filling the form, and attaching the form to send back.
My goal is to have the client fill an HTML version of the form, submit and be done with it, but everyone in the workflow be able to easily receive the filled Planner as a PDF form.
So some months ago I ran into this post Chris Trip, "Populate Livecycle PDF from mySQL database using PHP" #8, 22 Sep 2007 4:37 pm
which uses the command line Win32 pdftk.exe to merge an FDF file into an existing PDF on the remote server, and serve this to whoever.
My problem was with shared hosting and having the ability to use the Win32 pdftk.exe along with PHP which is predominantly used on Linux boxes. And we used a Linux box.
so i created the following unorthodox method, which a client fills the HTML version of the Planner, all field values are INSERTED into a table in MySQL DB, I and all filled planners that have been filled by clients to date can be viewed from a repository page where an XML file is served up of the corresponding client, but someone would have to have Acrobat Professional, to import the form data from the XML file into a blank form.. altoughh this is simple for me.. I have the PHP file already created so that when a Planner is filled and client submits. >> the an email is sent to me with a table row from the repository of the client name, #, email, and a link to d-load the XML file,
But I also have the PHP files created so that the Planner can be sent to by email to various people in the workflow with certain fileds ommitted they they do not need to see, but instead of the XML file beiong served up i need the filled PDF Planner to be served.
I can do this locally with ease on a testing server, but I am currently trying to use another host that uses cross-platform compatibility so i can use PHP and the pdftk.exe to achieve this, as that is why I am having to serve up an XML file b/c we use a Linux server for our website, and cant execute the exe.
Now that I am testing the other server (cross-platform host), just to use them to do the PDF handling (and it's only $5 per month) I am having problems with getting READ, WRITE, EXECUTE permissions..
Si guess a good question to ask is can PHP do the same procedure as the pdftk.exe, and i can eleminate it.
or how in the heck can i get this data from the DB into a blank PDF form, like i have described??
here are some link to reference
Populating a LiveCycle PDF with PHP and MySQL
http://www.andrewheiss.com/Tutorials?page=LiveCycle_PDFs_and_MySQL
HTML form that passed data into a PDF
http://www.mactech.com/articles/mactech/Vol.20/20.11/FillOnlinePDFFormsUsingHTML/index.htm l
and an example
http://accesspdf.com/html_pdf_form/

Livecycle/Dataservices 2.6.1 [Transient] property

Hi Guys and Girls
I am using livecyle 2.6.1 with AIR 2.0.2 and a java backend, with the flex 3.4 SDK.
I have a managed collection with a property that has a [Transient] variable set which is used as a flag for products that have been ordered.This variable is only used locally.
This collection/dataservice connection has been set to autoSync enabled, however when I change this flag the collection is updated to the server, is there a way to have this changed to not update to the collection to the server when this flag is set.
I thought (wrongly apparently) having a property denoted as [Transient] was to avoid this default behaviour.
[Transient]
public var isOrdered:Boolean=false;
Any help you can offer would be much appreciated.
Cheers
Jasen

Dustin,
Without the ColdFusion based data management destination defined on the LCDS server, the destination will not show up in the RMI registry. It is only the CF adapter code that does this. The 'stock' LCDS adapter does not support invoking via RMI the way the CF version does.
I would recommend you run the LCDS MessageBrokerServlet inside the ColdFusion web application. This will give you two things:
1. You will not have the overhead of RMI between CF and LCDS as they will share the same VM (better performance!).
2. You will be able to use the CF Data Management Gateway to pass messages to Java-based destinations. The APIs the gateway uses should work fine with either CF or Java based Data Management destinations.
The CF/LCDS integration doesn't support what you are trying to do when you run two seperate instances.

I created my php programs with CSS base on IE7. Mess up in other browser.

I created my css base on IE7. Now I want to check on other browsers, e.g. ie6, ie 5, firefox ...etc. everything mess up.
I found some example but it did not work. I wonder anyone can give me some hints.
Code Sample: BrowserBugs/Demos/legend.html:
fieldset
legend {
font-weight:bold;
font-size:1.2em;
Password ReminderEmail:
http://www.learn-css-tutorial.com/BrowserIssues.cfm firefox: ok
fieldset
legend {
font-weight:bold;
font-size:1.2em;
ie7: not ok.
fieldset
legend {
font-weight:bold;
font-size:1.2em;
I add the following: (here starts to confuse me!)
but it does not show as what suppose to be expected.
pls take a look.
Thanks in advance.
Patty

Hi Patti,
Put this below the CSS that works.

I got to say though Patti, it was right there in the demo. It explained exactly what to do.
I just have to 'nod' on that one and roll my eyes. hehe
You should go over it again, then again.

Download Livecycle Dataservices es2.61

I am unable to find the download to the latest version of livecycle es2. We are currently on jrun and I want to try to install the latest version of livecycle 2 on tomcat. Where can I get the download for the data services module and the forms module. Upgrade to es4 is not something in the cards at this point.
Thanks

Anybody?

Is SWFOBject messing up my Flash/PHP 'contact form'?

Hi all,
First post, and first project using Flash!
Here's the
page I'm having problems with...
It's an email contact page that uses a Flash contact form
that I purchased from iStockphoto. The swf uses a PHP script that I
keep in the same location on my server as the swf. The PHP sends
the email to my specified address. In theory that should work fine,
but in the interests of keeping things working across browsers, and
maintaining my Validation, I've been calling the swf using
SWFObject.
However, something is screwed up. When I click on 'Send' on
the successfully embedded Flash form, nothing happens. Neither my
hosting providers nor the author of the flash have been able to
work out why - although they both agree that SWFObject may have
something to do with it.
Please bear in mind that I'm REALLY new to Flash, although
I'm by no means a technonewbie - tell me what I'm looking for and
what to change and I can keep up, but someone posted the following
on another forum I frequent and I have no idea what it means:
quote:
Submitting a form relies on either a post or get method,
maybe SWFObject needs specific configuration to do this. If it
doesn't support either of those two methods you may need to use an
interim piece of javascript or something to accept the form
variables then call your sendmail.
Help much appreciated!
Owen

kglad,
The actionscript calls the PHP form but dosen't post any information, it loads in the browser and I get the email but nothing in it?
I'm just looking for the correct Actionscript to paste into flash and hopefully get it working. Thanks for the help.

PHP Issue

I currently have been hacking around trying to get the pre-installed php that comes with Mac OS X enabled, but seem unable to get the page viewable from localhost or just simply viewing it in safari through finder. It gives me the underlying code when I try to view it, ie the php isn't running ... my httpd.conf file is below: Help greatly appreciated on this! Thanks
## httpd.conf -- Apache HTTP server configuration file
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:<a class="jive-link-external-small" href="http://">http://httpd.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
ServerRoot "/usr"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USEFCNTL_SERIALIZEDACCEPT or
# USEFLOCK_SERIALIZEDACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#LockFile "/private/var/run/httpd.lock"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile "/private/var/run/httpd.pid"
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile "/private/var/run/httpd.scoreboard"
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig /private/etc/httpd/srm.conf
#AccessConfig /private/etc/httpd/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
MinSpareServers 5
MaxSpareServers 10
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
StartServers 5
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.so
#LoadModule vhostaliasmodule libexec/httpd/modvhostalias.so
#LoadModule env_module libexec/httpd/mod_env.so
LoadModule configlogmodule libexec/httpd/modlogconfig.so
#LoadModule mimemagicmodule libexec/httpd/modmimemagic.so
LoadModule mime_module libexec/httpd/mod_mime.so
LoadModule negotiation_module libexec/httpd/mod_negotiation.so
#LoadModule status_module libexec/httpd/mod_status.so
#LoadModule info_module libexec/httpd/mod_info.so
LoadModule includes_module libexec/httpd/mod_include.so
LoadModule autoindex_module libexec/httpd/mod_autoindex.so
LoadModule dir_module libexec/httpd/mod_dir.so
LoadModule cgi_module libexec/httpd/mod_cgi.so
LoadModule asis_module libexec/httpd/mod_asis.so
LoadModule imap_module libexec/httpd/mod_imap.so
LoadModule action_module libexec/httpd/mod_actions.so
#LoadModule speling_module libexec/httpd/mod_speling.so
LoadModule userdir_module libexec/httpd/mod_userdir.so
LoadModule alias_module libexec/httpd/mod_alias.so
LoadModule rewrite_module libexec/httpd/mod_rewrite.so
LoadModule access_module libexec/httpd/mod_access.so
LoadModule auth_module libexec/httpd/mod_auth.so
#LoadModule anonauthmodule libexec/httpd/modauthanon.so
#LoadModule dbmauthmodule libexec/httpd/modauthdbm.so
#LoadModule digest_module libexec/httpd/mod_digest.so
#LoadModule proxy_module libexec/httpd/libproxy.so
#LoadModule cernmetamodule libexec/httpd/modcernmeta.so
#LoadModule expires_module libexec/httpd/mod_expires.so
#LoadModule headers_module libexec/httpd/mod_headers.so
#LoadModule usertrack_module libexec/httpd/mod_usertrack.so
LoadModule logforensicmodule libexec/httpd/modlogforensic.so
#LoadModule uniqueidmodule libexec/httpd/moduniqueid.so
LoadModule setenvif_module libexec/httpd/mod_setenvif.so
#LoadModule dav_module libexec/httpd/libdav.so
#LoadModule ssl_module libexec/httpd/libssl.so
#LoadModule perl_module libexec/httpd/libperl.so
LoadModule php4_module libexec/httpd/libphp4.so
LoadModule hfsapplemodule libexec/httpd/modhfsapple.so
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule modvhostalias.c
#AddModule mod_env.c
AddModule modlogconfig.c
#AddModule modmimemagic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
#AddModule mod_status.c
#AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
#AddModule modauthanon.c
#AddModule modauthdbm.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule modcernmeta.c
#AddModule mod_expires.c
#AddModule mod_headers.c
#AddModule mod_usertrack.c
AddModule modlogforensic.c
#AddModule moduniqueid.c
AddModule mod_so.c
AddModule mod_setenvif.c
#AddModule mod_dav.c
#AddModule mod_ssl.c
#AddModule mod_perl.c
AddModule mod_php4.c
AddModule modhfsapple.c
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
Port 80
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group "#-1" on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
#ServerName new.host.name
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/Library/WebServer/Documents"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/Library/WebServer/Documents">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
#<IfModule mod_php4.c>
AddType application/x-httpd-php .php
#AddType application/x-httpd-php .php4
#AddType application/x-httpd-php-source .phps
#</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html index.php index.htm
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</Files>
# Apple specific filesystem protection.
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<Directory ~ ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</Directory>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig /private/etc/httpd/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The modmimemagic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# modmimemagic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include modmimemagic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule modmimemagic.c>
MIMEMagicFile /private/etc/httpd/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/private/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "/private/var/log/httpd/access_log" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog "/private/var/log/httpd/referer_log" referer
#CustomLog "/private/var/log/httpd/agent_log" agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/private/var/log/httpd/access_log" combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
# EBCDICConvertByType On=InOut text/* message/* multipart/*
# EBCDICConvertByType On=In application/x-www-form-urlencoded
# EBCDICConvertByType On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut /
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
Alias /icons/ "/usr/share/httpd/icons/"
<Directory "/usr/share/httpd/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This Alias will project the on-line documentation tree under /manual/
# even if you change the DocumentRoot. Comment it if you don't want to
# provide access to the on-line documentation.
Alias /manual/ "/Library/WebServer/Documents/manual/"
<Directory "/Library/WebServer/Documents/manual">
Options Indexes FollowSymlinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/"
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/Library/WebServer/CGI-Executables">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cs .cz .cs
AddLanguage ru .ru
AddLanguage zh-TW .zh-tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#AddType application/x-compress .Z
#AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other-server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your-domain.com" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phfabuselog.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phfabuselog.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "/private/var/run/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a-domain.com another-domain.edu joes.garage-sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *:80>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

gparker03 wrote:
Holy cow .... http://localhost/index.php is working! So basically the php has to be run ON the apache server correct? How would I get it to run in something like Coda? It's not viewable currently in Coda's preview menu.
Hmm. I downloaded Coda and messed with it a bit and I can't figure out how to get it to do that. Basically, you'd need a way to get it to recognize that the files need to be previewed with the Apache server instead of just reading them from the temporary files it seems to create. You might have to resort to using two apps open: Coda for editing, then just switch to your regular browser and access it through the "http://localhost" address. That's basically what I do. I edit in TextMate or BBEdit, then use a shortcut like "command-tab" to switch to my browser and preview it there.
Also mysql is already installed correct?
No, there's a user created for MySQL, but the server itself isn't installed. The best place to get it is from MySQL's web site. Just make sure you get the right version for your OS and CPU architecture.
charlie

LiveCycle messing up my php dataservices ?

Similar Messages

Maybe you are looking for