Living in apartment, here it has only wireless (no wired cable in the room). I've  an airport express (new ) so how can I do for extending signal (wireless) for using in myroom

Living in an apartment, here it has only wireless (no wired cable in the room) signal using for the internet connection. I've  an airport express (new) ,so how can I do for extending signal (wireless) for using in myroom. because the wireless signal is so weak.

Unfortunately, you won't be able to. In order to do so, you would have to configure both the AirPort Express and the other wireless router for a WDS. Since it will unlikely that the other router is another AirPort, nor will you have the ability to administer it, you won't be able to get this accomplished.

Similar Messages

  • I installed the eprint home and biz app on my ipad. how can i print from my jetpro wireless printer

    My iPad just states no printer found with air print. Is this an app that I need and will work with my wireless jet pro 8500

    Hello Monimc,
    To print using the HP ePrint Home & Biz app you will need to send the print from the app. AirPrint is built in to the iOS and give you the print option from emails and web pages. AirPrint is not able to work with the OfficeJet pro 8500. Hope this is helpful.
    I work for HP but my posts and replies are my own thoughts.
    If I have solved your issue, please feel free to provide kudos
    Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

  • I have an iPod touch and wife has a new ipad2. We share one computer. Now, when she downloads an app to her ipad the app also downloads on my iPod touch. How can we stop that?

    I have an iPod touch and wife has a new ipad2. We share one computer. Now, when she downloads an app to her ipad the app also downloads on my iPod touch. How can we stop that?

    you should have two separate account

  • How can I get alerts if a Wireless Access Point has been disconneted from the network?

    How can I get alerts if a Wireless Access Point has been disconneted from the network?
    Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
    Thanks in advance.

    Hi,
    The below link will answer ur question!!
    http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
    Please dont forget to rate the usefull posts!!
    Regards
    Surendra

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

    Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?

    emilypdunne wrote:
    Using Time Machine, is it possible to back up a computer AFTER a specific date. I only want to back up files from AFTER January 2015. Is this possible, and how can I do this?
    Is what you're saying that you only want backups in TM of the state of your Mac from January 2015 to the current date and nothing before then? I'd think the simplest solution would just be to delete in TM all the backups prior to 1/15 and then let TM do its thing. The ultimate source for all things Time Machine is here. On this page, note the comment that "Time Machine will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup" which I understand to mean that if you delete all the backups in the TM file prior to 1/15, any file that wasn't present on your Mac as of 1/15 will no longer be represented in the TM file. Note that the second link also has instructions for how to delete TM files.
    If you were trying to accomplish something else, then as Emily Litella (Gilda Radner in SNL) used to say, "never mind."

  • I just received my iPad2 today. When I turned it on it only showed a USB cable and the ITunes icon. What does this mean?

    I just received my iPad2 today. When I turned it on it only showed a USB cable and the iTunes icon. What does this mean?

    The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer running iTunes (version 10.2 +).
    Getting Started guide : http://support.apple.com/kb/HT4053
    The iPad manual, which also has a chapter on getting started can be downloaded from here : http://support.apple.com/manuals/#ipad

  • Can an airport express support wireless and wired connection at the same time

    im wondering if i can use wireless and wired connection at the same time

    The Ethernet port that the old AirPort Express has got is to connect the AirPort Express to your modem, not to connect another PC or Mac, so you can only connect wireless devices to the AirPort Express.
    If you have the new AirPort Express, you can connect a wired PC or Mac and more wireless devices or computers at the same tiem

  • I had 21 songs i my album and after syncronising i only had 15 songs left! All of them from Itunes! How can i get them back without paying for them again???

    I had 21 songs i my album and after syncronising i only had 15 songs left! All of them from Itunes! How can i get them back without paying for them again???
    Hello!!!
    I had 21 songs i my album and after syncronising i only had 15 songs left! All of them from Itunes! How can i get them back without paying for them again???
    Hello!!!
    This realy works??

    Where is the backup of the media and other important files from the computer?  Ultimately, it is the users responsibility to ensure that backups exists. Waiting until there is a problem to decide to do a backup is not smart.  Would you wait until a fire started in your home to call the insurance company and inquire about homeowners/renters insurance????
    In the event that no backup exists (stop being lazy.... keep backups of YOUR data and other important files):
    If you are in the US and running iTunes 10.3 or later, it is possible to redownload music via iCloud from purchased history.
    If you are not in the US or for some reason cannot run iTunes 10.3 or later, contact iTunes customer support and ask very nicely for the opportunity to redownload the content.  They are not required to provide this opportunity.
    It is also possible to transfer content from an iDevice that was purchased via iTunes.  On the new computer, sign into the iTunes account, authorize the computer, connect the device then select File > Transfer Purchases.
    The simplest method of all is to transfer or copy the media (and other important files) from the old computer or the backup of the old computer.  Typing "move itunes library" into the search bar here or into google will reveal step by step instructions on how to do this.

  • HT5622 I am living in New Caledonia, a French Territory. How can I purchase from iTunes (ex: USA, Australia) using my card, French Issued?

    I am living in New Caledonia, a French Territory. How can I purchase from iTunes (ex: USA, Australia) using my card, French Issued?

    You can only download content(other than podcast episodes) from a country's iTunes Store if you're in that country. For paid content, you also need to supply a payment method valid in that country.
    (85658)

  • Instructions for extending a wireless network through a wired connection

    These are the instructions for extending a wireless network by wiring two airports together.
    The benefit of this is to provide a strong signal in more locations in your home or business.
    The advantage of this technique over WDS is that the wired connection is faster and more reliable.
    These instructions assume you have a) an existing wireless network setup using an airport , b) a new airport that you want to add to your network, c) you can run a cat 5 cable between the two airports, and d) you are familiar with the airport utility.
    If while using these instructions you are prompted to update your airport firmware please do so.
    1) Gather the following information from your existing Airport on the Summary tab of Airport utility:
    a) Wireless Network Name
    b) Wireless Security
    c) You will also need the password, which hopefully you just know.
    2) Plug in your new Airport, connect it to the existing Airport using a cat 5 cable.
    3) Reset the new Airport using the tip of a paper clip. On my Airport Express that is next to the audio out.
    4) After a short wait the new Airport should appear in Airport Utility with a generic name.
    5) Click the new airport and click "Manual Setup". You may have to cancel out of some popups to get to the Manual Setup button.
    6) On the "Base Station" tab set a "Name" that does NOT equal the the name of your old Aiport. Also set the password. This us the password that one uses to make changes to the setup of the Airport.
    7) On the "Wireless" table set a "Wireless Network Name", "Wireless Security", and "Password" to exactly match that of your old Airport. This is the password that one uses to gain access to the network.
    8) On the "Internet->Internet Connection" tab set connection sharing to "Off (Bridge Mode)".
    9) Click "Update" at bottom right of Airport Utility.
    10) Test by using "Advanced->Logging and Stats->Wireless Clients" to see which clients are connecting to which Airport.

    viafax999 wrote:
    coolhwhip wrote:
    Thanks for the reply.  Like I said, I am pretty new to this.  So I need to buy something like this to put in my media center then?
    http://www.amazon.com/Hawking-HWREN1-Hi-Gain-Wireless-300N-Extender/dp/B001DMEYCY/ref=sr_1_1?s=pc&ie...
    Do I even need the Wireless N router at all, or will the Westell do the trick?  I'd be looking to stream HD from my main home PC, so I need good wireless speed.
    I assume that there is a tv in your media center so what would make much more sense would be to get a coax splitter and split the coax at that tv and then move the vz westell router to the other side of the splitter.  It really makes no matter where the westell router is on the coax setup and doing this should allow you to connect your devices directly to the router.
    So the coax feed from the ONT comes in through the garage into the office and is connected to the Westell in the office (which is hard-wired into my office PC).   If I move the Westell to the entertainment center I'll be in the same boat w/ my office PC then, i.e. needing a wireless connection to the Westell to get internet access.  Am I missing something here?

  • HT201240 my father was the only one, that know the password of his imac g3,the password? i have no cd or anything, how can i erase

    my father was the only one that know the password of his imac g3..
    in december he past away, but i cant get in to the imac..
    i have no cd or anything, how can i erase everything?

    Go here and click on manage my ID https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • My apple ID has been hacked so I had to create a new account, how can I get my old account back??

    My apple ID has been hacked so I had to create a new account, how can I get my old account back?? My iPhone and iPad are linked to the account i lost

    freedone wrote:
    Great! Yes mysterious is best way to describe internet eh lol. It could be that I have asked other questions that had absoulutely no relevance to the current q,  onto previous questions. So I am going to look thru them all..
    I did say m i s c h i e v o u s  didn't I? Mysterious it is though too.
    Regarding the latter, I have some tips for searching... (WARNING: I don not have a high opinion of the Forum Search abilities)
    Discussion Search
    https://discussions.apple.com/search.jspa?type=discussion&q=Great!&author=%2Fpeo ple%2F946207&sort=updatedAsc
    The above is what is called "Space Search"
    I used the first word of you above post " Great! " with a couple of filters applied - found this thread and one other
    If you can think of any term you may have used, it may be of some benefit to use this search
    ELSE
    I am VERY fond of Google "Site Search" for all of Apple.Com and its subdomains...
    a mere search for your username with quotes no brackets [ "freedone" ] yielded 313 results - but there IS another username "freedoneb" that may take up some of that real estate
    https://www.google.com/?gws_rd=ssl#safe=off&q=%22freedone%22+site:discussions.ap ple.com

  • HT5312 When I got my Ipod Touch 3 years ago, my mum set up an Apple ID in her name & email address. I have since got an Ipad & set up my own Apple ID. How can I update my Ipod to my Apple ID? I would like to sync the Ipad and Ipod, but cant get past this

    When I got my Ipod Touch 3 years ago, my mum set up an Apple ID in her name & email address. I have since got an Ipad & set up my own Apple ID. How can I update my Ipod to my Apple ID? I would like to sync the Ipad and Ipod, but cant get past this ID problem?

    Hi AnnieAnneok,
    Welcome to the Support Communities!
    The articles below may be able to help you with this.
    Click on the links to see more details and screenshots. 
    First, I would suggest you backup your iPod touch and transfer purchases to your computer:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Confirm your Apple ID is set up and updated with the correct information:
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    Then, in Settings on your iPod touch, sign out of your iCloud Account and your iTunes Store account and sign back in with the correct Apple ID.
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Cheers,
    Judy

  • I have had bad luck lately I lost my computer to water cant be fixed and now my IPOD has been stolen when I get a new one how can I get my I tunes,games on the new one without my computer or old I pod

    I have had bad luck with electronics lately my computer got lost to water and cant be fixed now my Ipod has been stolen I reported it to Apple but now I need to know when I get a new one how can I get back my music and games etc. if I can get it just with my account

    What kind of iPod are you getting to replace it? If it is an iPod Touch, and you are in the US, after you set up the Touch you can use the iCloud beta and download your previous music, books and app purchases directly to your Touch.

Maybe you are looking for

  • HP OFFICEJET 4500 DESKTOP FOR WINDOWS 8

    WHEN PRINTING FROM COMPUTER E-MAIL I GET ALL MY TITLES ON THE LEFT SIDE , LIKE DELETE. TRASH, JOKES ETC. THEN HALF OF THE E-MAIL MESSAGE PRINTS. HOW DO I FIX ?

  • LV 2011 Report Generation Toolkit Constantly asks for 8.6.1 CD

    I am having a strange issue. Its a bit intermittant, so I will try my best to explain when it occurs.  -If I make a new project and run something from the report generation toolkit, I will get an installer from labview 8.6.1. I am running Labview 201

  • Print preview of smart form

    Hi all, how to view the print preview of a smart form and how to debug the smart form Thank You

  • When bouncing- what's best method for smallest file size/highest quality?

    I am in the process of embedding 3 mp3's into a PDF to submit as a portfolio. The PDF also has text, and two scores included, and with the 3 embedded mp3's it can't be more than 10mb. So my question is: When bouncing a project out of Logic, what is t

  • ORA-01115

    One of my environment i am facing this error. Can any one explain what exactly this. Can any one give the solution for this. ORA-01115: IO error reading block from file 11 (block # 245504) ORA-27072: File I/O error