LMS 3.2-2.6 : migration and master/slave

Hi,
Customer has 2 LMS 2.6 standalone server, server A and server B
He wants to migrate both to 3.2 and he will have a new LMS 3.2 server C.
He would like to have server C master and server A and B slaves.
Do you think that we can migrate server A and B to LMS 3.2
Then, configure server C as master and server A and B as slaves without lost DCR data from server A and B ?
Many thanks, Elisabeth

No, this will not be possible. When you demote A and B to slaves, their DCRs will be overwritten by the new DCR on C. You can maintain the consolidated device list, but not the application data.

Similar Messages

Having migration trouble: master/slave issue in G4

I just got a 24-inch imac and began the migration process yesterday. And if it were 2005 I'd be in great shape. The new iMac saw only my ORIGINAL 20 GB drive (in two partitions, one for OS9 and one for OSX) and I, not realizing it didn't see the drive i installed in January 2005 and which is now my main drive, had it migrate the stuff from that drive. (I thought it was taking everything.) Obviously, then I had only the stuff from the old drive. Worse, the imac never could see the newer drive. I posted something on a different forum, and people immediatley responded it was a master/slave issue. I've now spent HOURS since last night rearranging drives and jumpers (one is the original Apple drive, from Western Digital, and the second is a Seagate 120 GB drive). The G4 either wouldn't turn on at all, or I just got a gray screen. We put everything back to the way it was, and at least now I have a computer.
However, I still have the migration issue. The original drive (according to the profile) is listed first, so is the master. How can I do the migration. I really don't want to reinstall everything.
Two options that I see: clone the Seagate to an external, and migrate from there. Or: put the Seagate into an external enclosure and again, clone from there.
Are there other options out there?
BY the way, we had massive troubles with the jumpers. It never worked to have the jumper on the seagate -- the only way this computer started is with the jumper NOT on 7/8 and on the Apple (original) drive.
Thanks in advance.

Aside from the issues you are having with the HDs, you also need to be very careful with what you migrate from a PowerPC to an Intel, or you may end up with conflicts which make the Intel inoperable. May I suggest Kappy's guide;
A Basic Guide for Migrating to Intel-Macs

LMS 3.0.1 Master / Slave upgrade

Hi,
We have two LMS servers 3.0.1 deployed in Master/Slave mode. And are working properly. But we are unable to add Cisco rtr2900 series router for its configuration managemnet.Current RME version is 4.1.1.
I want to go for a device update online or can be downloaded in psu_download folder. I have a confusion that
Should I upgrade Common Services (RME devices list) in the same Master/Slave mode or i need to setup both in standalone mode. Which one should be preferred.
Will it be enough to update RME 4.1.1 device list in LMS 3.0.1 or i must go for RME 4.3 (which requries all packages updates i mean LMS 3.2) becuase Cisco 2951 Router and Cisco 2911 Router can be added to current version of RME 4.1.1 by online update to CISCOWORKS LMS 3.0.1 and Cisco 2921 Routers and Cisco 2901 Routers can be added the updated version of CISCOWORKS LMS 3.2. Our requirement configuration mangemnet of Cisco rtr2901 and Cisco rtr2911
Supported Device List for LMS 3.2
http://www.cisco.com/en/US/partner/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html#3.0.1-27
Supported Device List for LMS 3.0
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.0.1/device_support/table/lms301sdt.html
Thanks & Regards

You should upgrade RME software on both machines and update the devices packages on both machines.
This is not related to if the are master or slave from a DCR point of view
Cheers,
Michel

Master Slave Architecture

What is the difference between Producer Consumer Architecture and Master Slave Architecture.
I know where to use Producer Consumer Architecture. But in what scenarios will Master Slave Architecture be useful.

http://zone.ni.com/devzone/cda/tut/p/id/3022
http://zone.ni.com/devzone/cda/tut/p/id/3023
try these links for some info.

Upgrade from LMS 3.0.1 to LMS 3.1 or 3.2 and problem with devices update

Hello
How to upgrade from LMS 3.0 December 2007 update to LMS 3.1 or LMS 3.2. The problem is the large number of C2960S-24TS-L switches that my organization has and cannot managed them..
I tried to upgrade devices through Software Center but always Ciscoworks informs me with the following message.
"Error while downloading package information from Cisco.com for the selected products. See the log file for details".
Also i can not run EOL/EOS inventory report. The message is
" INVREP0102: Cisco.com user credentials are invalid. Enter correct credentials." I check my credentials and is right.
The server has access to www through proxy without any restrictions.
In the past I've already updated devices through the software center. Also in the past i ve run EOS/EOL inventory reports.
The LMS 3.0 December 2007 has the following products
LMS
3.0.1
16 May 2008
CiscoWorks Common Services
3.1.1
02 Jul 2009, 07:44:58 EEST
2.
Campus Manager
5.0.5
11 Oct 2009, 07:36:10 EEST
3.
CiscoView
6.1.7
02 Jul 2009, 07:45:05 EEST
4.
CiscoWorks Assistant
1.0.1
02 Jul 2009, 07:45:05 EEST
5.
Device Fault Manager
3.0.5
12 Jun 2010, 07:31:48 EEST
6.
Internetwork Performance Monitor
4.0.1
02 Jul 2009, 07:45:11 EEST
7.
Integration Utility
1.7.1
02 Jul 2009, 07:45:14 EEST
8.
LMS Portal
1.0.1
02 Jul 2009, 07:45:16 EEST
9.
Resource Manager Essentials
4.1.1
02 Jul 2009, 07:45:17 EEST
Has anyone knows what can be the problem??.
Thanks

Hi,
the problem to access cisco.com is because of a "bug". Its ID is CSCto46927.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto46927
Symptom:
After the 16th of June 2011 LMS will no longer be able to download Software and Device Package updates, or PSIRT and End of Sale/Life information from CCO
Conditions:
Hosted services in Cisco.com that are being leveraged by LMS, for downloading the latest Software and Device Package updates, as well as the PSIRT and End of Sale/Life information are being migrated to a new framework and the old services will be retired.
This will affect all LMS 3.x and 4.x versions.
Refer to https://supportforums.cisco.com/docs/DOC-16806 for more information
Workaround:
Users of LMS 3.2.1 , 4.0 should install the patch that can be downloaded from cisco.com
Users of earlier version will need to upgrade to LMS 3.2 and then install the LMS 3.2 SP1 patch set before installing the patch"
Because of that it is necessary to upgrade not only to 3.1 or 3.2, you need 3.2.1 to get the patch and then access to cisco.com again.
The question about the better way for updating I can't answer. I did a update to 3.1 and then to 3.2. But I think you will find the requirements for the updates in the notes for them.
But I can't find LMS 3.1 in the cisco download center. There is only 3.2 and 3.2.1 available for me.
Sven

Real Instruments and Master Track icons dessapeared

This is when i open garage band
This happen when i start to used. The Real Istruments and Master Track icons desappeared. What is this happening and how can I fix it?

THis can either mean, that the GarageBand application needs reinstalling or that you have corrupted settings and preferences files in your user account. To find out if something in your user account needs fixing, try to launch GarageBand from a different user account. You could try to log off and sign into the Guest account or create a second account for testing using the System Preferences "Users&Groups" pane.
If GarageBand works well using a different account, try HangTime's "oddball probs" fix and trash the GarageBand preferences file - move com.apple.garageband.plist from the Preferences folder in your user library to the Desktop. See the FAQ:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)
But if it even does not work from a different account, trash GarageBand and reinstall it.
Regards
Léonie

Migration and SAP Support for BW 3.1

Hi,
I have couple of queries regarding Migration and SAP Support.
What is the required patch level that need to be mantained in BW 3.1 for a direct upgrade to BI 7.
I would like to know whether SAP still supports BW 3.1. I searched in SAP Service marketplace, but didn't get much information regarding this.
Your inputs are highly appreciated.
Regards,
Hari

Hello,
BW Upgrade from 3.x to 7.0
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e62b9990-0201-0010-42a7-ddcf5c93cafd
Hope it will help you.
Regards,

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

I know my back up exists I can see it on disk utility but migration and disc utility wont work to restore my back up on my new hard drive it shows up with the message "this disk is already in use" i am so done. someone pls help me

Otherwise software may be attempted to access the drive. The the computer up in Safe Mode by holding shift when you turn it on. Also be sure to power off and on the hard drive itself.

Live Migration and private network

Is it a best practice to put up a Private Network beetween the nodes in a pool (reserving a few network cards and switch ports for it), to have a dedicated network for the traffic generated e.g. by live migration and/or ocfs2 heartbeat? I was wondering why such setup is generally recommended in other virtualization solutions, but apparently it's not considered strictly necessary in OVM... Why? Are there any docs regarding this? I couldn't find any.
Thanks!

Hi Roynor,
regarding the physical separation beetween management+hypervisor and the guest VMs, it's now implemented and working...
My next doubt on the list of doubts :-) at this point is:
I could easily set up ONE MORE dedicated bond, create a Bridge with a private IP on it on each server (e.g. 10.xxx.xxx.xxx), and then create a Private VLAN completely insulated from the rest of the world.
I'd be putting the physical switch ports where the Private Bonds/Bridges belong to on the same VLAN ID.
But:
- How can I be sure that this network WILL be actually used by the relevant traffic? If I'm not wrong, when you set up e.g. a physical RAC cluster, at a certain point you are prompted to choose what network to use for the Heartbeat (and it will be marked as PRIVATE), and what network will be used by clients traffic (PUBLIC).
In Oracle VM such setting does not exist... Neither during installation, nor in VM Manager, nowhere.
- Apart from Security, I'm doubting that during heavy VMs migration problems could arise, because if the network gets saturated, there are chances that the OCFS2 heartbeat would be somehow "lost", therefore messing up HA etc. This is at least the reason why in a RAC setup a private network is highly recommended.
- I finally found that doc you mention from IBM (thanks for pointing it out!) but my opinion is that THEIR INTENTION was to separate the traffic at the same way I'd like to, but there is simply NO PROOF that such setup would work... They do not mention where you can specify what traffic you want to be on what network...
This is a very important point... I'm wondering why this lack of information.
Thanks for your feedback, btw
Edited by: rlomba on Dec 17, 2009 6:16 AM

Vendor/Customer Account Group and Master Records

Hi Gurus,
Please tell me during implementation Vendor/Customer account groups and Master Records will be prepared by FI Consultants or MM, SD Consultants?
Waiting for reply
ThankYOu

Dear Verma
It is the usual practice that FI consultants should prepare Account group and also maintain General data and Company code date in Vendor/Customer masters. SD and MM consultants are informed by FI to maintain Sales and Purchase organization respectively by SD and MM consultants.
If this helps please reward with points.
Best Regards
Kesav

Difference Between Phased Migration and Parallel-cutover and which is better considering Roll-back if something unexpected occurs

Difference Between Phased Migration and Parallel-cutover and whcih is better considering Roll-back if something unexpected occurs
Regards
Sumit

For what application and going from which version to which?
Chris

Satellite Pro 6100: What drive and connection is supported - Master, Slave or CSEL?

Hello,
i want to install a Pioneer DVR-K14L DVD writer.
After the installation, the notebook show me an
error during the initialisation.
It is possible to use this type of Slimline DVD writer?
What kind of modus is important (master, slave or cable-select)?
Thank you and
best regards
oelauge

Hi
I assume you get an IDE# 1 error message. Am I right?
The fact is that not all drives are compatible with the notebooks.
I'm not sure which settings the supported drive should have. But I surmise it's could be a CSEL.
However, I have found this DVD-RW drive which should be compatible; the part number is P000366780
http://www.getpartsonline.com/p000366780.html
But unfortunately, there is nothing about the pin assignment and the settings.
If you want to be 100% sure about the supported devices on your notebook so you should ask the Toshiba service partner in your country for the details

Migration and DVD/CD Sharing Update" (1.1)

I recently installed the "Migration and DVD/CD Sharing Update" (1.1)" update using the Software Update application on 10/19/08. The installation went fine with no errors or apparent problems.
I noticed yesterday that when I adjust the brightness up or down on my display ( I have an original 15" Apple Studio Display) the graphic that used to appear showing the brightness level no longer appears but the brightness does change. Also, I have my Epson USB printer connected to one of the USB ports in the monitor and it no longer appears in my Printer list and now I can not print.
When I go into the System Profiler, click on Hardware Graphics/Display it gives me the information for the Display correctly but at the last line it shows " Display: Status: No display connected". When I click on Hardware USB it just shows a generic description USB Bus with no other information included for the monitor or the printer (printer is attached to USB Hub in the monitor}. When I click on Hardware Printers I get "No information found."
I also used to be able to use the power button on my monitor to turn on the computer and display at the same time but that no longer works.
I have tried Repairing Permissions and also the Pram/NVram reset to no avail.
Any ideas?
Thanks,
Bill

After changing cables, swapping ports, running Applejack AUTO in deep clean mode, booting up with my hard drive that had not been updated with the "Migration and DVD/CD Sharing Update" (1.1)" and finally the Tiger Retail boot installation DVD, I finally gave up without solving the problem and shut down the computer.
After 2 more cups of coffee, I realized there was 1 thing I totally forgot to do. I remembered that I had not unplugged the computer from the outlet and held the reset button located near the battery on the motherboard.
You guessed it, everything is now working fine.
The only thing I can not figure out is why this happened after running the "Migration and DVD/CD Sharing Update" (1.1)". Go figure.
Bill

Migration and DVD/CD Sharing Update Problem

Hi, my Mac OS 10.4.11 has a software update on 10-19-2008. It installed the update Migration and DVD/CD Sharing Update, since then, my sharing panel stopped working, I can`t set any option of Services tab and my Firewall tab does not open, it is gray and I can`t click on it. Just Internet tab work now. How can I fix that? Someone had this same problem?

Hi Kaaru Ando ,
I can't find how to just ask a question.
Yes, it can be hard to find... the problem is if there are Categories at the top, you won't see the Post New Topic link, like here...
http://discussions.apple.com/category.jspa?categoryID=177
But if you drill down to one Topic, it'll show, like...
http://discussions.apple.com/forum.jspa?forumID=752&start=0
For Installation & setup...
http://discussions.apple.com/post!default.jspa?forumID=752

Migration and DVD/CD Sharing Update version 1.1

I have an original Air and older Intel iMac and Remote Install utility version 1.0
I see there is a new Migration and DVD/CD Sharing Update version 1.1
The details of this update states:
Products Affected
MacBook (13-inch, Aluminum, Late 2008), MacBook Pro (15-inch, Late 2008)
So I am concerned about whether I should proceed to install this on my iMac to update the Remote Install capability since none of my hardware is specifically mentioned.

Switch900, The basic process works very well. The basic instructions are at:
http://support.apple.com/kb/HT1131
I tested since I did the recent update (even though my version is still showing version 1.0) and it is working properly. However someone tipped me off to go to:
http://www.apple.com/support/downloads/migrationanddvdcdsharingupdate.html
to get the update again (without getting it via Software Update) and in his case, that gave him version 1.1 I have yet to do that and will need to test again once I have done that.
But basically you install this software on your MAC or PC that has a DVD drive, load a disc containing software that you want to install on your Air, in that other MAC or PC and then get to it from the Air and install the software over your local network.
Message was edited by: WebSailor

LMS 3.2-2.6 : migration and master/slave

Similar Messages

Maybe you are looking for