LMS 3.2 - Can't add new devices to RME 4.3.0

Hello,
since some days I get the error message
Problem with File /WEB-INF/screens/dm/rmeattributes.jsp!!!No bean specified
if I want to add new devices to the RME.
The last change I did was to update the device packages directly over cisco.com.
But I can't tell if the problem persists since the update or not...
Thanks for any advice!
Sven

Hi,
thanks for the reply!
I checked it once again.
If I want to add the 2960S device to RME I will get this failure message:
Problem with File /WEB-INF/screens/dm/rmeattributes.jsp!!!Cannot find bean dcrdeviceTable in scope null
The other message "Problem with File /WEB-INF/screens/dm/rmeattributes.jsp!!!No bean specified" is a little bit strange...
Today I will get this if I want to add some other devices together with the 2960S device.
I think that I didn't mark the 2960S yesterday....but I can't be 100% sure.
It looks like that the problem is this unknown device.
Is there a package for this 2960S device or what can I do to get it in RME?
Thanks a lot!
Sven

Similar Messages

LMS 3.2 on Solaris 10 - New devices and RME archive job

Hi All,
I've created a RME job that archive syncs our devices. When I add new devices to Common Services, which updates RME, will those new devices have their configurations archived by that same RME job, or do I need to create a new job?
When the existing job was created the option "All Devices" was selected.
Thanks,
Jose Ribeiro

Hi Jose,
If you really wants to track the devices configuration with the help of RME Jobs ( sometimes for auditing purpose we have to have a job ), then you can schedule a job as well but with the option Group Selector like (Select A Layer: Device SelectorGroup Selector ). You can see this option at the very top while creating the job. If you select this option, the membership of the group is dynamic in nature i.e this job will run on all those devices which exist in the group that you have selected at the time of running of job and not at the time of creation of job. For example, if you had created job on Normal Group of RME, then this job will attempt to take the backup of config of all those device which exist in Normal Group. So if your RME is synchronized with DCR (Common Services), and if you are adding the new device to Common Service, then you need not to add this device again for this schedule job since DCR will send this device to RME and once this device have inventory collected, it will automatically be in the normal group of RME and since we had selected Group selector option, RME will collect the config for this device too.
However periodic polling and periodic collection is also desinged to acheive the same purpose and known as kind of administrative task for managing the devices in RME.
Now the question arise what is difference between periodic polling and periodic collection :- Its very simple actually -
Periodic Polling :- Under Periodic polling, RME will first poll the device and if it find any change in the actual configuration of device with the existing configuration in RME . it will trigger collection of backup config for the device. If it will not find any difference between the actual configuration on the device and the existing configuration in RME, it will not trigger any new sync archive on the device thus save your network resources.
Periodic Collection :- Under Periodic Collection, it will not do any comparison and always trigger the sync archive on the device. However you will be able to see the new version of device configuration only when any change on the device happen since there is no point of keeping the same config many times in RME database.
Hope it answer your querries.
Thanks & Regards
Gaganjeet

Hi, i buy new phone in ukraine,but when i try add new device on my apple support profile,it says that serial nuber already used by another apple id please help what can i do!thx

Hi, i buy new phone in ukraine,but when i try add new device on my apple support profile,it says that serial nuber already used by another apple id please help what can i do?!thx

You purchased a gray market phone. The iPhone is not available for sale from any Authorized source in Ukraine. There are no authorized or supported carriers in Ukraine.
Take it ack and get your money back.
If you want an iPhone, go to a country where unlocked iPhones are available for legitimate sale and purchase one directly from Apple.

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Install NTFS 3G
http://macntfs-3g.blogspot.com/
If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system. However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended.

I can remove add trusted devices are used in addition to my password

i can remove add trusted devices are used in addition to my password in appleid

Hi hoang32,
Thanks for visiting Apple Support Communities.
It sounds like you are wondering about removing or adding trusted devices to use with two-step verification for your Apple ID.
You can use these steps to remove or add a trusted device:
As long as you still have your Recovery Key and remember your Apple ID password, you can sign in and add a new trusted device to your account. You can also remove any devices you may have lost, sold, or given away.
Go to My Apple ID (appleid.apple.com), select "Manage your Apple ID," and sign in.
On the Verify Your Identity screen, select "Unable to receive messages at any of your devices?"
In the pop-up window, enter your Recovery Key.
Then, under "Edit your Apple ID," select Password and Security > Trusted devices > Manage.
Remove the device you no longer wish to use to verify your identity.
Either verify another device already listed, or select "Set up Find My iPhone" to add a new trusted device to your list.
From:
Apple ID: Can't sign in with two-step verification - Apple Support
For more help with two-step verification, see the Frequently Asked Questions:
Frequently asked questions about two-step verification for Apple ID - Apple Support
Sincerely,
Jeremy

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

I am running 10.6.6 on my mac and 10.5.8 on my server and I can not add new people to Ical on my mac but if another user on a 10.5 version of mac can. What is the issue?

Set up iCloud
Set up iCloud (2)

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

My bookmarks have disappeared and I can't add new bookmarks.

All my bookmarks have disappeared, including the defaults on the toolbar of most visited, etc. I can't add new bookmarks either. I have tried all the Help Topics on lost bookmarks. I tried restoring bookmark backups, but the backup from the date I lost bookmarks says "unable to process backup file." All the later dates will load, but they have no bookmarks saved in them. All of the other Help Topic attempts went fine but did not solve the problem.

What I would say is that if you have any bookmarks at all at present that you make a manual backup of them, and then continue to make manual backups as any recovery efforts proceed.
* see [[Backing up and restoring bookmarks]]
There is a possibility that you had corrupt files, and may then have inadvertently overwritten any files that may have contained bookmarks. It is a good idea to make manual backups, for cases where the auto backups do not. work as expected.
If you have already followed the instructions carefully about [[lost bookmarks]] and without resolving the situation, there may not be much you can do about your personal bookmarks. If they are important and you are willing to try there may be a possibility using file recovery software, &/or sqlite editors that something could be salvaged, but not something I can advise on, I am not currently a Mac user.
The default bookmarks should be fairly easy to restore. You can probably also start the bookmarks working again. Trying the simplest options first:
# work from [safe mode]
#* at this stage when you see the first dialogue window with options do not make changes, press the continue button
# use the customise / customize option from the toolbars and '''reset defaults'''
#* Mac may differ from my Windows XP, I can right click bookmarks, or use the tools menu see [[How do I customize the toolbars?]]
# if that has failed to resolve the problem go back to safe mode as in step 1 but this time use reset toolbars and controls.
By now you should have the default bookmarks back and maybe the bookmarks work and will save new bookmarks, try it whilst still in safe mode, before going back to try in ordinary mode. If it works in safe mode but not in ordinary mode you probably have some add-on managing to cause problems
If you still have problems and bookmarks will not save see [[bookmarks not saved]] that probably indicates corrupt places.sqlite &/or localstore.rdf the linked article explains how to find and delete them.

Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

Team,
We are using SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help. The MDS installed and configured on SAME Machine (MyServer).
I have two issues here.
1. MDM website can not Identify the local Users (MyServer\MyUser).
The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
2. Can not add new user in Existing working MDM.
I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

Now I Solved this problem in my case.
I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
Hope, it will help

How can i add new tab in Business Partner

hi every body,
Present i am working on SAP CRM 3.0 version. i need to add new tab in BP. Here EEWB not available. How can i add new tab?

Hi babu,
you can add new tab in Buisness partner with the help of screen configaration functionality,in screen configaration u select first bp role (sold to party or retailer etc) and click on process screen sequence and again click on overview and u will get fields right side of the screen, there u will see the field "new screen" click on that and add description for new tab and click on continue,save the document
now u will again create a bp with modified bp role u will see changes means u will see new tab page on perticular bp role
i hope this is helpful
Rewards points if helpful
Thanks&regards
kishore kumar

Can we add new attachment outside SC(like from custom page on SoCo PO) to existing SC ?

Hi Experts,
Need your expert advice on the below requirement.
We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size,disp_url etc are not stored properly in DB.
in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is new attachment is partially updated.
Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content,phio_content of new attachment in existing attachment internal table and calling above FM for update.
Can we add new attachment outside SC to existing SC ? if yes , then how?
Thanks,
Partha

Your attachments are saved in BBPCONT you can use below steps to check that , I think you can develop a solution inline to the standard architecture.
a) Run FM BBP_PD_XX_GETDETAIL
b) Use GUID from the Export parameter ET_ATTACH-GUID
c) Use table BBPCONT and pass ET_ATTACH-GUID in step (b) to PHIO_ID .
d) Then you will have the document content.
You will get the attachment
Cheers
Ankit Jain

How can i add new jcomponent to a frame?

hi.
how can we add new component to a frame? look at this code. Why when i click on button, nothing added to frame? event handled correctly and frame size changes but no button adds to frame.
private void convertButtonMouseClicked(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
JButton newButton = new JButton("new");
getContentPane().add(newButton , BorderLayout.CENTER);
newButton.setVisible(true);
setSize(500, 500);
}

Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.
Well typically you wouldn't add a button to the Center of a BorderLayout. If you really want to do this you should be using a [Card Layout|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html].
In general the code for adding/removing components should be:
panel.add(...)
panel.revalidate();
panel.repaint();

How can i add a device on find my iPhone?

how can i add a device on find my iPhone?

You activate iCloud and Find my iPhone on the device you want to track using your Apple ID.

Ever since the last update I don't have my old bookmarks, can't add new ones and can't import my HTML file. How do I fix this?

ever since the last firefox update I don't have my old bookmarks, can't add new ones and can't add my HTML file of my bookmarks

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

How can I add new songs to the top (not the bottom) of my playlist in iTunes?

How can I add new songs to the top of my playlist in iTunes?
I thought thats what it did before but now it automatically adds new songs to the bottom of the list.
Not a huge issue but an annoyance.

Go to your Music library
Then, Click Playlist
Then, Click the sort arrow until it points down.

LMS 3.2 - Can't add new devices to RME 4.3.0

Similar Messages

Maybe you are looking for