LMS 4.2.2 ipsla http operation without DNS Lookup Time

Hi,
i´ve setup a add hoc device (webserver) and created a http operation with following options (see image 1) This operation polls the device every 10secs. So far so good. However, in the monitor graphic chart i do not see the DNS Lookup Time (image 2). What´s wrong with this setup?
Thank you,

the patch for BugID CSCtz29665 is released here on CCO:
"http://www.cisco.com/cisco/software/release.html?mdfid=284259296&flowid=31102&softwareid=280775103&os=Windows%20CE%202.11&release=CSCtz29665_4.2.2&relind=AVAILABLE&rellifecycle=&reltype=latest"
I do not know whey they opend a new section for Windows CE 2.11, - but on CCO you have to follow this path to find it:
Downloads Home > Products > Network Management and Automation > Routing and Switching Management > Network Management Solutions > Cisco Prime LAN Management Solution > Cisco Prime LAN Management Solution 4.2 > LMS Patches > Windows CE 2.11-CSCtz29665_4.2.2

Similar Messages

  • VMM is unable to perform this operation without a connection to a Virtual Machine Manager management server.

    Hi,
    I'm running SCOM and VMM integration. For the most part everything is working. However I get lots of alerts generated in regards to my scvmm server.
    This is a the guide I used:
    https://technet.microsoft.com/en-ca/library/hh882396.aspx
    SCOM + VMM 2012r2 Ur4
    One of the Errors(which appears to be root issue):
    The PowerShell script failed with below
    exception
    System.Management.Automation.CmdletInvocationException: VMM is
    unable to perform this operation without a connection to a Virtual Machine
    Manager management server. (Error ID: 1615)
    Use the Get-VMMServer cmdlet
    or the -VMMServer parameter to connect to a Virtual Machine Manager management
    server. For more information, type at the command prompt: Get-Help Get-VMMServer
    -detailed.At line:109 char:12
    + $vmm = Get-SCVMMServer $VMMServer -Credential
    $cred;
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    at
    System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object
    input, Hashtable errorResults, Boolean enumerate)
    at
    System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean
    ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[]
    pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext
    funcContext)
    at
    System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame
    frame)
    at
    System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
    frame)
    at
    System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
    frame)
    Script Name:
    GetStorageSubsystemPerfScript
    One or more workflows were affected by
    this.
    Workflow name:
    Microsoft.SystemCenter.Advisor.StorageSubsystem.Performance.PerfCollection
    Instance
    name: SCVMM01.Domain.com
    Instance ID:
    {B5175EAC-D64D-2553-D567-F19B5C864BBD}
    Management group: OMGRP82

    Can you connect from powershell? get-vmmserver <VMMServerComputerName>
    If this doesn't work it's likely that your VMM server doesn't work. Check Application log to see if there are errors related to VMM service.
    You can also collect traces as described
    here and attach them to this thread.
    Are you using a domain administrator account?  (this is the default allowed after SCVMM is installed - until other users are added).
    also try restarting VMM server or VMM services once.
    this occur if the SQL database owner is indicated as NULL.  Try adding the SQL SA account as db owner.
    refer this once -
    https://social.technet.microsoft.com/Forums/en-US/a4199cb2-ccbf-4bb0-96c1-7a640143f81b/error-id-1615-vmm-is-unable-to-perform-this-operation?forum=virtualmachingmgrhyperv
    Thanks, S K Agrawal

  • HTTP Receiver without charset in SP18

    Hi,
    I have a scenario, in which I am sending data to external server using HTTPS Receiver.
    In configuration I have following values :
    1) Content Type:   multipart/mixed; boundary=BOUNDARY
    2) XML Code ( charset) :   UTF-8
    With these settings XI message is going to external server.But external server is not processing the message correctly because it <i>expects XI message <b>without</b> "charset"</i> (XML Code configuration in XI)
    In HTTP receiver configuration XML Code(charset) configuration is mandatory. I tried to put other charset values. But as external server expects messages without charset, it is not working.
    BTW, this same communication channel was working OK when we had SP14. we recently had our system upgraded to SP19 and it stopped working. On researching found charset is the problem. I sent same payload to the external server using another HTTP client without charset and it is working ok.
    Is there any way we can configure HTTPS Receiver ( in SP18 ),so that we can send payload to extenal server without charset (XML Code) value.
    Any input/pointers will be greatly appreciated.
    -Venu

    Hi Venu,
    Install note 1038911 in your system.
    The note is not translated to english yet, but it should work anyway.
    Regards
    Stefan

  • How to create operations without entering a performing work center

    How to create operations without entering a performing work center ? which control key should i select ?

    Hi
    QM01 is control key used for all the task lists of Quality.
    there is no such a configuration associated with control key &  usage of work center.
    Work center is used for the activity capturing perpose & control key is to control operations.
    I hope this is clear.
    Entering a work center is totally depends on the scenario & not control key.
    Regards
    Sujit

  • Java.io.IOException: Error in HTTP operation

    hai
    My Application is working fine in emulator and working fine under Via OTA and also works fine in Nokia 7210 ,but i install in Nokia 6230i i got the error java.io.IOException: Error in HTTP operation,when i type the same url in Nokia 6230i browser the result came back from the server ,only in application its not working ,plese help me regarding this , what is the problem
    my code for Http Connection
    System.out.println("in here");
         HttpConnection c = null;
    InputStream is = null;
    try
              System.out.println("in try");
    c=(HttpConnection)Connector.open(url);
              c.setRequestMethod(HttpConnection.GET);
              c.setRequestProperty("User-Agent", "Profile/MIDP-2.0 Configuration/CLDC-1.0");
              c.setRequestProperty("Content-Language", "en-US");
              System.out.println("after passing url");
    int rc = c.getResponseCode();
    if (rc != HttpConnection.HTTP_OK)
    throw new IOException("HTTP response code: " + rc);
    System.out.println("after responce");
    is = c.openInputStream();
    ByteArrayOutputStream bin = new ByteArrayOutputStream();
    byte[] buffer = new byte[3000];
    int rd;
    while ( (rd=is.read(buffer))!= -1)
    bin.write(buffer,0,rd);
    System.out.println("after getting data");
    bin.flush();
    return bin.toString();
    Thanks & regards
    Ravi varma

    You still did not answer my question on the other forum: what is the value of rc? int rc = c.getResponseCode();Mihai

  • I am trying to install update 11.0.06 for my Adobe Acrobat XI Pro, but without success multiple times.Get error 1603 each time,

    I am trying to install update 11.0.06 for my Adobe Acrobat XI Pro, but without success multiple times.Get error 1603 each time. I have tried disabling my antivirus software without success. I have looked for solutions to error 1603, and have tried what it suggests (empty temp files in Windows, etc.), also without success.There is nothing that mentions Window 8 or 8.1 operating system, though. Is this the issue? Please help.

    Hi Dawn,
    We might want to have a look at the install logs to determine the cause.
    Please try the following basic steps :
    > Enable the hidden Admin Account on Windows 7 ( Ref :  http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
    > Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
    > Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
    Reboot and try installing in the new enabled Admin user account and check.
    Regards,
    Rave

  • Configure Apps for SharePoint 2013 in dev environment without DNS

    I have a SP 2013 dev env
    http://spitlab/ .I want to configure app store in this environment 
    will I be able to do it without access to a DNS server 
    I followed the below two articles 
    http://www.ashokraja.me/post/Develop-SharePoint-2013-Napa-App-In-Local-Dev-Environment-Configuring-On-Premises-without-DNS.aspx
    I am able to install third party apps but when I click on it . it gets redirected to sfs.in 
    next i try this 
    http://sharepointconnoisseur.blogspot.com/2013/07/shortcut-to-prepare-sharepoint-2013-app.html
    same thing I am able to install 3rd party apps but when i click on it .. it goes to intranet.com 
    so is it possible to install third party apps on a dev box without DNS and check out third party apps and if what steps am i missing ?

    Hi,
    If you click the 3rd party apps and it is redirected to sfs.in or intranet.com, this means you configured app domain correctly.
    You can read the official document per the following first link to understand what app domain is (with DNS configured), app domain format is as bellow image (borrowed from this
    article), and app domain is defined as you want(e.g. ContosoApps.com).
    Without DNS, as your above two articles described, the app domain (e.g. apps.com, or apps.sfs.in) is written manually in hosts file directly, you can construct an app domain as your own, then after you install a custom developed app, it should be the following
    app url format.
    http://technet.microsoft.com/en-us/library/fp161236(v=office.15).aspx
    http://www.ashokraja.me/post/Develop-SharePoint-2013-Napa-App-In-Local-Dev-Environment-Configuring-On-Premises-without-DNS.aspx
    http://sharepointconnoisseur.blogspot.jp/2013/07/shortcut-to-prepare-sharepoint-2013-app.html
    Thanks
    Daniel Yang
    TechNet Community Support

  • How can i set dynamic properties in HTTP Binding adapter  at run time

    Hi,
    I am trying to put dynamic properties in HTTP Binding adapter at run time. I am able to Set endpointURI, UserName and Password dynamically using below code.
    Is it possible to set Version , Retry Count, timeout, authentication type at run time.
    below is code for setting endpointURI, UserName and Password dynamically.
    <invoke name="HttpInvoke" bpelx:invokeAsDetail="no"
    partnerLink="SACS_Http_Adapter"
    portType="ns1:Request_Response_ptt" operation="Request-Response"
    inputVariable="HttpInvoke_Request-Response_InputVariable"
    outputVariable="HttpInvoke_Request-Response_OutputVariable">
    <bpelx:toProperties>
    <bpelx:toProperty name="endpointURI" variable="inputVariable"
    part="payload" query="@endpoint"/>
    <bpelx:toProperty name="javax.xml.ws.security.auth.username"
    variable="inputVariable" part="payload"
    query="@username"/>
    <bpelx:toProperty name="javax.xml.ws.security.auth.password"
    variable="inputVariable" part="payload"
    query="@password"/>
    </bpelx:toProperties>
    </invoke>
    Thanks,
    Siva
    Edited by: 929920 on Apr 25, 2012 7:45 AM

    Hi Bastain,
    Assuming your using the Batch Process Model, you can programatically insert a new SN into the correct parameter in the postUUT callback sequence.
    This sequence has access to the UUT.SerialNumber parameter so you can use a File Global to pass the SN from the main sequence to the postUUT callback. 
    Here is an example of what I mean. 
    Adam
    Attachments:
    set SN within Main Sequence.seq ‏80 KB

  • How can I get adobe flash player to run without asking every time?

    Every time I go to a site that needs adobe flash player it asks if its ok to let it run. How do I make it run without asking every time?

    A possible cause is that you do not have the latest version of the Shockwave Flash player (16.0.0.305).
    You can check that in "Firefox/Tools > Add-ons > Plugins" ("Ask to Activate" or "Always Activate").
    You can find the latest Flash player versions for Firefox on this page:
    *http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
    See also:
    *https://support.mozilla.org/kb/why-do-i-have-click-activate-plugins

  • Send UI meassages from teststand sequence to Simple CVI Operator Interface with Asynchronous Timer

    Hello,
    Is it possible and how is it possible to send UI meassages from a teststand sequence to the Simple CVI Operator Interface with Asynchronous Timer which could be downloaded from NI Hompage. I use this problems because it is more stable than the standard OIs
    regards samuel

    This post could help:
    http://forums.ni.com/ni/board/message?board.id=330&message.id=7567
    Regards.

  • Recovering dropped table without using pointing time recovery/

    Hi geeks,
    Noob here.I have a question*.I want to recover the dropped table with data with out using pointing time recovery.*
    for Ex:Use hasr dropped the table at 10:00 and realized that he dropped the table at 16:00hrs .So i want to fetch the data(DDL+DML) without using pointing time recovery.
    So please find answers for my question.
    Thank you,
    Rakesh M.

    Welcome to the forum!
    Whenever you post provide your 4 digit Oracle version (result of SELECT * FROM V$VERSION).
    >
    Noob here.I have a question*.I want to recover the dropped table with data with out using pointing time recovery.*
    for Ex:Use hasr dropped the table at 10:00 and realized that he dropped the table at 16:00hrs .So i want to fetch the data(DDL+DML) without using pointing time recovery.
    >
    FLASHBACK TABLE myTable TO BEFORE DROP;
    See the examples in the FLASHBACK TABLE section of the SQL Language doc
    http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_9012.htm
    >
    Retrieving a Dropped Table: Example If you accidentally drop the pm.print_media table and want to retrieve it, then issue the following statement:
    FLASHBACK TABLE print_media TO BEFORE DROP;
    If another print_media table has been created in the pm schema, then use the RENAME TO clause to rename the retrieved table:
    FLASHBACK TABLE print_media TO BEFORE DROP RENAME TO print_media_old;
    If you know that the employees table has been dropped multiple times, and you want to retrieve the oldest version, then query the USER_RECYLEBIN table to determine the system-generated name, and then use that name in the FLASHBACK TABLE statement. (System-generated names in your database will differ from those shown here.)
    SELECT object_name, droptime FROM user_recyclebin
    WHERE original_name = 'PRINT_MEDIA';
    OBJECT_NAME DROPTIME
    RB$$45703$TABLE$0 2003-06-03:15:26:39
    RB$$45704$TABLE$0 2003-06-12:12:27:27
    RB$$45705$TABLE$0 2003-07-08:09:28:01

  • Can I print a calander without showing the times of events?

    Can I print a calander without showing the times of events. Or, alternatively, is there a way to list things without having them be an event. Just notes on the day, for instance.

    It seems like a simple solution must be at hand. There is an option in the iCal Preferences (General) panel--Show event times. With this command unchecked the screen view of the month view is free of the times of day, but when I print the month view the times of day are printed.

  • HT1926 My iTunes installer was interrupted & now it's telling me "Your system has not been modified.  To complete these operations at a later time, please run the installer again". The only problem is, I've tried to run it about six or seven times.  Can s

    My iTunes installer was interrupted &amp; now it's telling me "Your system has not been modified.  To complete these operations at a later time, please run the installer again". The only problem is, I've tried to run it about six or seven times.

    I'm not sure anyone here knows more about the Java plugin than you do...
    Were you starting the control panel from disk as administrator because it didn't work starting it through the Start menu (if you have Control Panel set to View by Category, the Java control panel is under "Programs").

  • Can you run Embedded PL/SQL Gateway and Oracle HTTP Server at the same time

    Hi,
    I know this will sound a bit odd but their is a business case for asking this. Can you run APEX via the Embedded PL/SQL Gateway and the Oracle HTTP Server at the same time? Would their be any security/stability/etc issues I'd need to worry about? I know that I'll need to run them on different ports.
    Thank you,
    Martin Giffy D'Souza
    [http://apex-smb.blogspot.com/]

    I think I've done this in the past. Theres no technical reason why you can't do this as far as I know.
    I can't remember if I used different ports or same port.

  • How to I get Adobe Reader XI to accept links made with Adobe Acrobat XI without asking each time?

    How to I get Adobe Reader XI to accept links made with Adobe Acrobat XI without asking each time?

    Asking for what, exactly?

Maybe you are looking for