LMS 4.2 Send config to Swiches

Question

Hi All,
We want to send some standard config commands to all the switches for security audit. Can someone please advise how to send them to the switches?
Thanks

Answer 1

Hi,
for this you can use Netconfig feature. Below is the very good guide for the same:
Step 1 Select either:
•Configuration > Tools > NetConfig > Deploy
Or
•Configuration > Job Browsers > NetConfig
The NetConfig Job Browser appears.
Step 2 Click Create.
The Netconfig Job Type page appears, displaying the following job types:
•Device Based
•Module Based
•Port Based
Create a NetConfig Job based on -Devicehttp://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-0/user/guide/configuration_management/cmug/netcfg.html#wp1680477
Making and Deploying Configuration Changes Using NetConfig -http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-0/user/guide/configuration_management/cmug/netcfg.html#wp1680425
Also, there's another feature "Baseline compliance" what you can use to check if the devices  are having the some specific configuration/command & compliant. it'll list the compliant /non-compliant t devices,  with then 1 click you can make them compliant. below is guide for the same: -
Using Baseline Templates to Check Configuration Compliance
http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_resource_manager_essentials/4-3/user/guide/rme_ug/baseline.html
Creating a Baseline Template
http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_resource_manager_essentials/4-3/user/guide/rme_ug/baseline.html#wp1103981
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information