Load and save multi value checkbox value dynamically to the table

How to retrieve data for multi value checkbox ?

See this example for handling of any multiselection item in APEX:
https://apex.oracle.com/pls/apex/f?p=31517:84
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Similar Messages

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

Ntenich,
If your table has a Header and your Legend text is in the header, it will be picked up by the table.
Jerry

How to pass tag name and value dynamically in the output of PCo notification?

Hi,
I have a requirement to develop such a scenario where there can be multiple no of tags in PCo (Say 10) but there will be single notification to push the tag name when the value got changed and the changed value to MII. for any value change for any of the tag, the notification will be trigger. So As per my knowledge I have to pass the tag name and value dynamically in the "output" tab of the notification. But need your support to find out how to pass them dynamically.
Thanks in advance.
Regards,
Suman

Hi Suman/Jeedesh,
As per Pco notification, it will trigger whenever any of the tag value changes in Agent instance subscription items.
For above issue, My suggestion
1. Create DB table name TAGLIST with 200 tags as rows in columns (Tagname, TagValue)
2. Based on notification trigger, create a transaction and update values w.r.t TagNames in above table
3. Next time, when notification trigger with fresh value for any of the tag, cross check with existing TagName with Value and update in DB table.
4. And in the mean time, send those Tag details vie mail trigger or as per requirement
Instead of creating 200 notification, above is a just alternate way suggestion to achieve dynamic tag value change notification.
Hope it might solve your problem
Regards,
Praveen Reddy

I have a pdf file which contains text if i copy all text and paste them into notpad and save file as .txt Is it change the ascii value of text ?

I have a pdf file which contains text if i copy all text and paste them into notpad and save file as .txt Is it change the ascii value of text ?

How to know character's encoding is ASCII?

Load and save text file???

hi,i've this program works as far as i know.what i need to do now is load the file when the program starts and saves any updates made when i exit the program to the text file called "PublicationList.txt" how can i do this?i dont know where to start.if someone can show me the code to put in so it works that would be what i need please.thanks alot if you can help.
The text file look contains the information as so:
PubID 1 Pubname Times Pubtype National Pub UM Status A PPR 50
PubID 2 Pubname Guardian Pubtype National Pub UM Status A PPR 60
PubID 3 Pubname Sun Pubtype National Pub UM Status A PPR 30
public class publication
public int PublicationID;
public String publicationname;
public String publisher;
public String PricePerIssue;
public String pubstatus;
public String publicationtype;
public publication(int NewPublicationID, String Newpublicationname, String Newpublisher, String NewPricePerIssue, String Newpubstatus, String Newpublicationtype)
PublicationID = NewPublicationID;
publicationname = Newpublicationname;
publisher = Newpublisher;
PricePerIssue = NewPricePerIssue;
pubstatus = Newpubstatus;
publicationtype = Newpublicationtype;
public String toString ()
String pubreport = "---------------------------Publication-Information-----------------------------\n\n";
pubreport += "Publication ID:" PublicationID" Publication Title: " publicationname"\n";
pubreport += " publisher: " publisher " price Per Issue: " PricePerIssue"\n";
pubreport += " publication Status: " pubstatus " publication Type: " publicationtype"\n";
return pubreport;
public void SetPublicationID(int PubID)
PublicationID = PubID;
public int GetPublicationID()
return PublicationID;
public void Setpublicationname(String pubname)
publicationname = pubname;
public String Getpublicationname()
return publicationname;
public void Setpublisher(String Pub)
publisher = Pub;
public String Getpublisher()
return publisher;
public void SetPricePerIssue(String PPI)
PricePerIssue = PPI;
public String GetPricePerIssue()
return PricePerIssue;
public void Setpubstatus(String Status)
pubstatus = Status;
public String Getpubstatus()
return pubstatus;
public void Setpublicationtype(String Pubtype)
publicationtype = Pubtype;
public String Getpublicationtype()
return publicationtype;
import java.util.*;
import publication;
public class PublicationContainer
LinkedList PubList;
public PublicationContainer()
PubList = new LinkedList();
public int add (publication newpublication)
PubList.addLast(newpublication);
return PubList.size();
private class PubNode
public publication pubrecord;
public PubNode next;
public PubNode (publication thepublicationrecord)
publication p = thepublicationrecord;
next = null;
public String toString()
return PubList.toString();
public void remove(int PubID)
PubList.remove(PubID);
public publication get(int PubID)
return (publication)PubList.get(PubID);
public void set(int PubID,publication newpublication)
PubList.set(PubID, newpublication);
import cs1.Keyboard;
import publication;
import java.util.*;
public class publicationmain
public static void main(String args[])
PublicationContainer pubdatabase = new PublicationContainer();
int userchoice;
boolean flag = false;
while (flag == false)
System.out.println("------------------------------------Publications--------------------------------");
System.out.println();
System.out.println("please Make a Selection");
System.out.println();
System.out.println("1 to add publication");
System.out.println("2 to delete publication");
System.out.println("0 to quit");
System.out.println("3 to View all publications");
System.out.println("4 to Edit a publication");
System.out.println();
userchoice = Keyboard.readInt();
switch (userchoice)
case 1:
String PubName;
String PricePerIssue;
String Publisher;
String Pubstatus;
String Pubtype;
int PubID;
System.out.println ("Enter Publication ID:");
PubID = Keyboard.readInt();
System.out.println("Enter Publication Name:");
PubName = Keyboard.readString();
System.out.println("Enter Publisher Name");
Publisher = Keyboard.readString();
System.out.println("Enter Price per Issue:");
PricePerIssue = Keyboard.readString();
System.out.println("Enter Publication status");
Pubstatus = Keyboard.readString();
System.out.println("Enter Publication type:");
Pubtype = Keyboard.readString();
pubdatabase.add (new publication(PubID, PubName, Publisher, PricePerIssue, Pubstatus, Pubtype));
break;
case 0:
flag = true;
case 2:
System.out.println ("Enter Publication ID:");
PubID = Keyboard.readInt();
pubdatabase.remove (PubID);
System.out.println ("publication: "+(PubID)+" removed");
System.out.println();
break;
case 3:
System.out.println (pubdatabase);
break;
case 4:
System.out.println ("Enter Publication to be edited by Publication ID: ");
PubID = Keyboard.readInt();
pubdatabase.remove (PubID);
String PubName1;
String PricePerIssue1;
String Publisher1;
String Pubstatus1;
String Pubtype1;
int PubID1;
System.out.println ("Enter Publication ID:");
PubID1 = Keyboard.readInt();
System.out.println("Enter Publication Name:");
PubName1 = Keyboard.readString();
System.out.println("Enter Publisher Name");
Publisher1 = Keyboard.readString();
System.out.println("Enter Price per Issue:");
PricePerIssue1 = Keyboard.readString();
System.out.println("Enter Publication status");
Pubstatus1 = Keyboard.readString();
System.out.println("Enter Publication type:");
Pubtype1 = Keyboard.readString();
pubdatabase.add (new publication(PubID1, PubName1, Publisher1, PricePerIssue1, Pubstatus1, Pubtype1))
break;
default:
System.out.println("Incorrect Entry");
}

public void readFile()
     BufferedReader br = new BufferedReader( new FileReader("PublicationList.txt") );
     String row;
     while( (row = br.readLine() ) != null)
          StringTokenizer st = new StringTokenizer(row," ");
          String temp = st.nextToken();
          String pubid = st.nextToken();
          temp = st.nextToken();
          String pubname = st.nextToken();
          temp = st.nextToken();
          String pubtype = st.nextToken();
          temp = st.nextToken();
          String pub = st.nextToken();
          temp = st.nextToken();
          String status = st.nextToken();
          temp = st.nextToken();
          String ppr = st.nextToken();
          // now you have in the Strings the values you needed
          // so what you want to do now
     } // read next line
     br.close();
}try the writing on your own.
tobias

Pass values dynamically to the WHERE clause in SFAPI

Hi there
We have a requirement to pass values dynamically (in the run-time of the interface) to the WHERE condition to our SFAPI query.
Eg -
SELECT person, personal_information, address_information, phone_information, email_information, employment_information, job_information, compensation_information, paycompensation_recurring, paycompensation_non_recurring, job_relation, accompanying_dependent,         global_assignment_information, direct_deposit, national_id_card, person_relation
          FROM CompoundEmployee
          WHERE last_modified_on >= to_date('LAST_RUN_DATE') AND
                       last_modified_on <= to_date('CURRENT_RUN_TIME')
LAST_RUN_DATE is stored in a custom entity for which we execute another OData query. The custom entity is updated with the CURRENT_RUN_TIME once the interface has been executed successfully. So the next time the interface is run it picks up the LAST_RUN_DATE from the custom OData entity.
SAP PO has the functionality to run a dynamic query for OData adapters. Refer to Note 2051137 - PI Successfactors adapter : Dynamic odata query and single synchronous sfapi query
Eg - select fields from position (this is what you state in OData query path in the comms channel; this is static); and you have an advanced tab in comms channel where you mention dynamicquery and set it to true (this points to a XSD which has the keyword TOP, SKIP & FILTER in it).
This gets the filter values passed from the BPM from another query (from a OData cust_table).
So the whole query is - select fields from position filter field a = x field b = y etc. Field a field b are fields in position that are you passing values x and y in run time of the interface.
SAP PO also has the advanced tab feature for SFAPI for dynamic query.
Question is -
how to use it?
has anyone implemented this before?
What does XSD will look like?
How do we pass values to the fields to the Where clause for SFAPI.
Any ideas are welcome!
Regards
Arijit Das

After you have added a new where clause on the detail VO, try re-executing VO's query by DetailVO.executeQuery()
If it doesn't work try re-executing the MasterVO's query after you have added the where clause on the detail

How to load and save custom workspaces in PE7

I've written a little utility which allows PE7 users to load and save custom workspaces. It's attached to post #1 of this thread.
System requirements
The utility has been tested with Windows XP Pro SP3 only. It might or might not run under Vista. It will only work with PE7 installations where the executable files are in the default places.
Installation
When you have downloaded the utility (it's only 199KB) you can run it from any convenient place in your system - it doesn't need to be installed as such.
Usage
It's pretty self-explanatory in use but here's the manual!
Run the downloaded utility "PE7WS.exe".
A file selection dialog appears. Choose the workspace layout file you wish to use. "LastUsed.layout" is the last used workspace (that's all you will be offered the first time you run the program). If you press Cancel at this point, the program will exit and nothing will happen.
Once you have selected the workspace, click "Open" and Premiere Elements 7 will run, using the workspace layout you chose.
After you exit from Premiere Elements 7, a workspace layout file save dialog will appear. If you made changes to the workspace during your Premiere Elements 7 session, you can now give the revised workspace a name and save it.
Do not save the workspace in a different directory from that which the dialog offers!
If you have changed an existing custom workspace, and you want to update the version previously stored, just select the name and over-write the saved workspace layout with the new one.
If you don't want to save the workspace at all, just click "Cancel" - next time you run Premiere Elements, you can choose the "LastUsed.layout" workspace to use that last used unsaved workspace in any event.
If you use the PE7WS utility to run Premiere Elements 7, and then you use the menu option "Window > Restore Workspace", then exit, you can either cancel the workspace saving stage, (which will mean that "LastUsed.layout" will contain that default workspace), or you could give that default workspace a name like "PE7 Default" so you can start a future Premiere Elements 7 session with the default workspace, even though you last used a custom workspace.
If you run Premiere Elements 7 in the usual way without using PE7WS.exe, the workspace that appears will be the last used one.
The usual disclaimer...
The utility should be entirely safe in use, but I can't accept responsibility for any loss or damage it might cause. However, the only file manipulation is does is to workspace files in the directory that Premiere Elements 7 uses purely for the purpose - the utility doesn't go anywhere near your precious project files.

I'm finding it very handy on my particular twin 22" monitor setup to sometimes use a one-screen layout and sometimes a two screen layout. I 'discovered' that having the timeline on the second monitor enables me to tweak edits there while having the playback full size after pressing the "full screen" button on the first monitor. Where the timeline would normally be I have the history, mixer, and other windows always open. As the second monitor is also used by another PC (the one I have the net and email etc on) using "Maxivista" monitor sharing software, I revert to single screen layout when doing stuff like exporting to DVD so I can see what is going on with the render while typing stuff like this.
Selectable workspaces are dead handy!

How can I load and save text using FileReference class

Let me start by saying I have no intention of using php and I can't wait until flash cs5 comes out with its new read/write capabilities
I want to load and save XML files (stored on my local hard-drive) in AS3.
I am using the FileReference class.
Firstly I have noticed that when using FileReference.save if you replace an existing file instead of writing over the file data is appended to the end of the file. Can I make it so the file is overwritten (as it should be) or make it impossible for the user to save in such a situation.
Secondly I want to load in text from an external file using FileReference.load I know that somehow you use FileReference.browse first to get it to work but I want to know exactly how to do it.
I have looked for a tutorial about loading text in this manner and have not found one.
Any help would be much appreciated especially if you could point me in the direction of a relevant tutorial
Thanks

the filereference class is for downloading and uploading files.
if you want to load xml, use the xml class.
and, if you want to write to an xml file and don't want to use server-side code, wait.

Load and save difficulties.

I am new to java and do not understand how the load and save functions work.
I have the following code and would like the load function to open selected files into text area 1 and the save function to save the contents of text area 2.
Can anyone help me with thuis please?
//Adding text field one
          TextArea ta1 = new TextArea(15,20);
          textPanel = new JPanel();
          textPanel.setLayout(new GridLayout(1,1) );
          textPanel.setBorder(titled);
          textPanel.add(ta1);
          container.add(textPanel, BorderLayout.NORTH);
          //Adding text field two
          TextArea ta2 = new TextArea();
          textPanel = new JPanel();
          textPanel.setLayout (new GridLayout(1,1));
          textPanel.setBorder(titled2);
          textPanel.add(ta2);
          container.add(textPanel, BorderLayout.CENTER);
          //setting the window requirements 800, 600
          setSize(800, 600);
          setVisible(true);
          setResizable(false);
          Load.addActionListener( new ActionListener()
               public void actionPerformed(ActionEvent e)
                    final JFileChooser fc = new JFileChooser();
                    int returnVal = fc.showOpenDialog(fc);
          Save.addActionListener(new ActionListener()
               public void actionPerformed(ActionEvent e)
                    final JFileChooser fc = new JFileChooser();
                    int returnVal = fc.showSaveDialog(fc);
     });

Example:
// Your code
Load.addActionListener( new ActionListener() {
    public void actionPerformed(ActionEvent e) {
      File file = getFile('o');
//      final JFileChooser fc = new JFileChooser();
//      int returnVal = fc.showOpenDialog(fc);
// end your code
File getFile(char fcType) {
    int returnVal = 0;
    File file = null;
    JFileChooser fc = new JFileChooser();
    if ( fcType == 'o' )
      returnVal = fc.showOpenDialog(fc);
    else
      returnVal = fc.showSaveDialog(fc);
    if (returnVal == JFileChooser.APPROVE_OPTION) {
      try {
        file=fc.getSelectedFile();
      } catch (IOException e) {
        // show exception or handle it
    return( file );
}

Load and Save MySql Database

In what way in java can I load and save a full database ,from MySql, in java , a dump operation .

This is how I am parsing and requesting the information.. I know it's in there somewhere I just can't get the variables, do I need to add them ? It's not making much sense to me at the moment, I'm sorry !! I need to add the variables to the request somehow.. so I can receive the info, no ?
var tab = "SQLtab";
var filesend = "path to php file";
var modesend = "post";
function variableTransaction(fichier, modesend, tab, var1, var2) {
     var URLload = new URLLoader();
     var URLrequest = new URLRequest(fichier);
     var variables:URLVariables = new URLVariables();
     variables.tab = tab;
     variables.var1 = var1;
     variables.var2 = var2;
     if (modesend == "post") {
          URLrequest.method = URLRequestMethod.POST;
     } else if ( modesend == "get") {
          URLrequest.method = URLRequestMethod.GET;
     if (var1 == false && var2 == false) {
          URLload.dataFormat = URLLoaderDataFormat.VARIABLES;
          URLrequest.data = variables;
          URLload.load(URLrequest);
          URLload.addEventListener(Event.COMPLETE, loadComplete, false, 0, true);
     } else {
          URLrequest.data = variables;
          URLload.load(URLrequest);
          var receiveObject = variableTransaction(filesend, modesend, tab, false, false);

Load and Save a game in director

hi, i would like to have the option to load and save a game
that i have created in Director MX 2004. But, I'm unsure what
script to attach to my LOAD and SAVE buttons. Was wondering if sum1
has an idea as to what the lingo script might be?
thanks
corry

You can find my reply to this cross-post in the
Director
Online forum.

How do I load and save to my iMac a dvd purchased elsewhere?

how do I load and save to my iMac a dvd purchased elsewhere? Thank you.

The mods here are adverse to mentioning software to duplicate commercial media, which is called "ripping." However, you can search outside of this forum for the software you need.

Illustrator "Not Responding" on load and save

Good evening..
We bought a new computer our graphic designer (HP Z400 quad-xeon 2.66GHz, 16GB ram, Quadro 4000 graphic card), installed with Windows 7 64-bit, set it up with the Adobe CS 5.5 Master Collection.
The problem is with Illustrator, whereas it goes to "Not Responding" on load and save of files. The progress bar when saving stops at 5-10%, but it seems like it's still doing it's thing and it eventually goes through (15-45secs). However, I really hate getting this kind of message, moreso because his current desktop (HP XW4600, Win XP 32-bit, 3BG of RAM, Adobe CS5) is not doing this at all.
I looked a lot of the forums, and tested what was offered and it still isn't better.
- I removed an Add-On I had installed, no luck.
- Removed all network drives, no luck.
- Unchecked "Create PDF compatible file", no luck.
Working locally is the same as on the network, which makes me believe the network is not a problem in my case. (Even switched from 100mb network connection to 1GB, which was the first thing I tried)
Mind you, all these things I've tried were done in addition to the others, so even to total of all these wasn't helpful, and I'm still at square one.
I'd like to add that all the other applications in the suite are behaving correctly, Photoshop, Premiere, InDesign... Everything else is working great and not freezing at all. Which is why I find this wierd that Illustrator would act like that while all the others are fine.
Anything else I should be trying?
Jonathan
Edit: I checked again on his previous computer, and it seems the issue is there as well, unlike what I mentionned before, which might point to a problem with Illustrator itself, since between CS5 and CS5.5, Illustrator hasn't changed. Altough I'm not sure if it may be that the old computer is just *that* slow...

Well, it has the Adobe PDF printer (from Adobe Acrobat) and MS XPS Document Writer (from Office), but since they weren't real printer I hadn't mentionned them. Is this what you consider Virtual printer?
Either way, I've added a printer but it's still doing the same thing.

Dashboard Prompt using values not from the table

Hi,
I have a requirement from the client to design a dashboard report like the following.
Dashboard prompt will have 4 filters, three filters come from the table, but the fourth filter will have 3 values not from the table. The fourth filter will have values like "Report with Sales Amount", "Report with Purchase Amount", "Report with both Purchase and Sales". I have three different Table reports designed for each of the fourth filter choices. But how do I implement it, both in the dashboard prompt as well as navigating to the rite report based on the selection.
Is my approach correct.
Thanks for your time and help.

The fourth prompt where you have "Report with Sales Amount", "Report with Purchase Amount", "Report with both Purchase and Sales" you pull a dummy column into the prompt and write a sql in show.
would be something like
SELECT Case when 1=0 then "Dimension- Customer"."Cust Name" else 'Report with Sales Amount' end FROM Sales UNION SELECT Case when 1=0 then "Dimension- Customer"."Cust Name" else 'Report with Purchase Amount' end FROM Sales
and in the prompt set a presentation variable say var_criteria
Now create report2 for with a some randomn column and another column will have the values that you want to display for example 'Report with Sales Amount'
Create a filter on the 2nd column and reference the presentation variable var_criteria and default it to 'Report with Sales Amount'
On the dashboard page in the section place the report and enable guided navigatoin by selecting report 2.
Please let me know if you have any questions.
thanks,
deep

Save as Reduced Size PDF and Save as Optimized PDF do not reduce the file size. What gives?

Save as Reduced Size PDF and Save as Optimized PDF do not reduce the file size. What gives? I used Acrobat 9 to do this for a long time. I recently received new laptop loaded with with Acrobat 10 and it does not work the same. I typically scan 8-10 pages of receipts, combine the files in Acrobat, and then optimize to reduce the size so I can upload with my expense report. Typically, my files were reduced to 200-400 KB. I have a 2 MB file that will not reduce at all.

Bernd, thank you for your attempt to help but the option dialog windows do not contain the same options. There are numerous other posts on this forum about this issue and there is no answer. Clearly, there is an issue. I have submitted this issue to our internal help desk.

Load and save multi value checkbox value dynamically to the table

Similar Messages

Maybe you are looking for