Load failure due to lock

Hello all,
the loads into one of my cubes is failing consistently due to the error 'Object requested is currently locked by user BATCH'.
Could you please suggest why this is happening ?
The setting in the processing tab is 'PSA and data target in series'.
Best Regards,
Sanjay

Two possibilities exist:
- You are still loading previous requests. (or deleting data from the cube)  As long as these processes are running it might be that the cube does not get uploaded.  Solution: wait till those are finished and try again.
- A previous load resulted in a dump.  In this case normally your locks should be cleaned by SAP, but it happens that the objects remain locked.  If you are sure this is the case you can manually remove the locks with SM12. (or ask your BC people, if you are not authorized).
Tom

Similar Messages

  • Periodic Schedule failures due to locked objects

    We are periodically encountering issues with nightly schedules against BW Bex universes.  Some schedules will fail with the error "A database error occured.  The database error text is: Error getting variables for cube (Cube\Query name) (catalog cube): Object requested is currently locked by user (user) (WIS 10901).  This doesn't happen all the time and we can't reproduce it on demand.  We have checked st22 for any further explaination and there is no record of anything.  We have already applied Note 1528921 which we thought would resolve the issue but that did not.  I have not found anything that points to the root cause of the issue.  Has anyone else come across this and resolved it?

    Check also SAP note [1615620|https://bosap-support.wdf.sap.corp/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303136313536323026].

  • Load failure due to CR and/or LF

    Loads into cube from ODS fail when short description field contains special characters - probably <CR> and/or <LF>.  Characters
    are getting there by users 'copying' text  from EXCEL spreadsheet an then 'pasting' into CRM description
    field.   Load from CRM into ODS is ok, but subsequent load to cube fails.
    Anyone aware of an easy way to resolve this?

    Hi,
       Maybe you could write a routine, to get rid of these characters. The routine would either be in the start routine or the in the transfer rules.
    Regards.

  • Load Failure due to Hierarchy

    Hi Experts
    I am facing a problem in a load that fails because of the following reason
    Record 13: Node ID 00054658 starts an endless loop.
    Record 4039: Node ID 00054647 does not exist
    End Update of Master Data hierarchy.
    please suggest why is the load failing what exactly can be done to rectify the error or incase i am missing out something please let me know so that i can provide that info too.
    Thanks
    Puneet

    [Hello ,|http://chandranonline.blogspot.com]
    Have a look at these OSS Notes
    SAP Note 569137 Inconsistent BW hierarchy 3.0B/3.10 (Support Package 8/2)
    SAP Note 859293 Runtime: Upgrade to 640 - error when reading node hierarchy
    [Thanks|http://chandranonline.blogspot.com]
    [Chandran|http://chandranonline.blogspot.com]

  • DTP running long time to load master data due to lock on SID table

    Hi,
    we are facing a problem while DTP loading master data into targets(Info Objects).
    It is taking long time to load data due to below error.
    18.03.2014 01:03:23 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:13:39 EXTRACTION OF DATAPACKAGE 000009                                                                  RSAR          051          S
    18.03.2014 01:13:40 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:24:50 EXTRACTION OF DATAPACKAGE 000010                                                                  RSAR          051          S
    18.03.2014 01:24:51 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:38:34 EXTRACTION OF DATAPACKAGE 000011                                                                  RSAR          051          S
    18.03.2014 01:38:41 All records forwarded                                                                             RSM2          730          S
    18.03.2014 01:52:10 EXTRACTION OF DATAPACKAGE 000012                                                                  RSAR          051          S
    18.03.2014 01:52:10 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:06:51 EXTRACTION OF DATAPACKAGE 000013                                                                  RSAR          051          S
    18.03.2014 02:06:53 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:22:32 EXTRACTION OF DATAPACKAGE 000014                                                                  RSAR          051          S
    18.03.2014 02:22:33 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:38:36 EXTRACTION OF DATAPACKAGE 000015                                                                  RSAR          051          S
    18.03.2014 02:38:37 All records forwarded                                                                             RSM2          730          S
    18.03.2014 02:55:25 EXTRACTION OF DATAPACKAGE 000016                                                                  RSAR          051          S
    18.03.2014 02:55:25 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 03:13:56 TRUNCATE TABLE "/BI0/0600000066"                                                                  DBMAN         099          I
    18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00                                                             DBMAN         099          I
    18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 03:13:56  LOCK TABLE "/BI0/0600000066" IN EXCLUSIVE MODE                                                   DBMAN         099          I
    18.03.2014 03:13:56 NOWAI                                                                                             DBMAN         099          I
    18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00                                                             DBMAN         099          I
    18.03.2014 03:13:58 EXTRACTION OF DATAPACKAGE 000017                                                                  RSAR          051          S
    18.03.2014 03:13:59 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:34:24 EXTRACTION OF DATAPACKAGE 000018                                                                  RSAR          051          S
    18.03.2014 03:34:25 All records forwarded                                                                             RSM2          730          S
    18.03.2014 03:56:03 EXTRACTION OF DATAPACKAGE 000019                                                                  RSAR          051          S
    18.03.2014 03:56:03 All records forwarded                                                                             RSM2          730          S
    18.03.2014 04:19:55 EXTRACTION OF DATAPACKAGE 000020                                                                  RSAR          051          S
    18.03.2014 04:19:56 All records forwarded                                                                             RSM2          730          S
    18.03.2014 04:44:07 SQL: 18.03.2014 04:44:07 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 04:44:07 TRUNCATE TABLE "/BI0/0600000068"                                                                  DBMAN         099          I
    18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:02                                                             DBMAN         099          I
    18.03.2014 04:44:09 SQL: 18.03.2014 04:44:09 ALEREMOTE                                                                DBMAN         099          I
    18.03.2014 04:44:09  LOCK TABLE "/BI0/0600000068" IN EXCLUSIVE MODE                                                   DBMAN         099          I
    18.03.2014 04:44:09 NOWAI                                                                                             DBMAN         099          I
    18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:00                                                             DBMAN         099          I
    18.03.2014 04:44:12 EXTRACTION OF DATAPACKAGE 000021                                                                  RSAR          051          S
    18.03.2014 04:44:13 All records forwarded                                                                             RSM2          730          S
    For this long running data load we didnt find any short dumps and no locks available on SM12 also.
    Please help on this.
    Thanks,
    Sankar.

    Can we know what kind of data source is this. attribute or text data source.
    what is data volume? its less or more?
    Actually we load direct access data thru dtp(No psa) into info objects for text data sources where have less data only.
    While running your dtp is any attribute change run for the same info object ot any transactional loads are happening?
    Is this happens on particular day or weekend or anydays?
    Thanks

  • Package Load Failure message in VS 2005 and Error: WIJ 20002

    After installing BusinessObjects Enterprise XI 3.1 .NET SDK when ever I open any project in VS 2005 I get the error message (the same happened on other system as well)
    Package Load Failure
    Package 'BusinessObjects.Enterprise.Vsip.BOEVsPackage, BOEVsPackage, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=... has failed to load properly (GUID = {...}). Please contact package vendor for assistance. Application restart is recommended, due to possible environment corruption. Would you like to disable loading this package in the future? You may use 'devenv /resetskippkgs' to re-enable package loading.
    I did try 'devenv /resetskippkgs' but still get this error. Any idea reagarding this.
    Next issue using the code sample provided in the site to create webi document by passing the universe id gives error message :
    "The Web Intelligence Java Report Panel cannot connect to the server. close the report panel and try to connect again or see your BO Administrator. (Error: WIJ 20002)."
    The Java version I have is 6 and I checked the Universe is not locked.
    Need help to identify the cause for both errors.

    Try the following as posted on another forum:
    Two solutions: 
    1.  -Go in to the Tools menu in .NET, and choose Import and Export Settings.
        - From the dialogue box, choose Reset All Settings and follow the steps
    2. If you have installed VS.NET to a drive other than the C drive, copy all files from the folder C:\Program Files\Microsoft Visual Studio 8\Common7\IDE to the same folder on the drive where .NET is installed, ie :
    D:\Program Files\Microsoft Visual Studio 8\Common7\IDE
    Regards,
    Jonathan

  • Data load - Failure Scenarios

    Can anyone please explain in detail on how to handle this DATALOAD issues. I would like to understand for following scenario in BI 7.0 and R/3 4.6c
    1) R/3 --> PSA --> DSO --> CUBE
    So, there are one infoPackage and 2 DTP's are involved.
    Let us take take a scenario, Please explain me in detail (Steps), on how to fix the LOAD, if the LOAD failed in R/3 --> PSA or PSA --> DSO or DSO --> CUBE.
    I would appreciate your help in advance and points will rewards, of course.
    BI Developer

    Hi.......
    1) Generally load fails in R/3 --> PSA due to RFC connection issue......You can check the RFC connection SM59.....
    If it fails........you can make the status red.....and delete the failed request from PSA........again load it........
    2) Load from PSA to DSO may fail due to many reasons....
    a) Lock issue...>> in this case you can check the lock in SM12........wait for the lock get released...........then make the QM status red......delete the request from the target..again repeat the load............
    Or may be due to locked by change run........in this case also after the completion of ACR....you have to repeat the load..
    b) load failed because last delta failed.........In this case first you have to rectify the last delta.........then repeat this load....
    3) DSO --> CUBE.........a)here also the load may fail due to lock issue...in this case also you have to delete the request from the target.after making the QM status red........then lock get released you have to repeat the load.......
    b)while loading data from DSO to infocube , the dtp run failed due to short dump.The error anlysis gives description as DBIF_RSQL_SQL_ERROR,
    This error is usually seen when the table behind ODS is getting updated from more than one source system simultaneously. Here the data packets from more than one request contain one or more common records. This gives rise to deadlock while updating inserting records into the ODS table and subsequently a short dump is encountered leading to the failure of one request. The solution is to cancel the loads and run them serially. A possible long term solution is to load the data up to the PSA in parallel and then load the ODS table from the PSA in serial. (Here change the InfoPackage to option ‘PSA only’ and tick ‘Update subsequent data targets’).
    Solution
    It may be possible that the job is set up in such a way that the activation of data in the ODS takes place only after data is received from all four regions. Thus, if the failing request is deleted the correct requests will also be deleted. Hence it is required to change the status of the failed job from red/yellow to green, activate the ODS data and then re-start the load from the (failing) source after correction of any possible errors.
    c) while loading the active data that is in the first ODS into a cube - it fails with the following error.
    err #1 )Data Package 1 : arrived in BW ; Processing : Error records written to application log
    err #2 ) Fiscal year variant C1 not expected
    Sol :   'GO to SPRO, SAP Customizing guide
    Open the tree:
    SAP Netweaver
    SAP Business Information Warehouse
    Maintain FIscal Year Variant
    Hope this helps you.....
    Regards,
    Debjani........
    Edited by: Debjani  Mukherjee on Sep 24, 2008 8:47 PM
    Edited by: Debjani  Mukherjee on Sep 24, 2008 8:53 PM
    Edited by: Debjani  Mukherjee on Sep 24, 2008 8:54 PM

  • ETL Failure Due to Failure of a Task

    Hi All,
    I am getting ETL failure due to failure of a task, sporadically. Also, when i re-run the ETL, the ETL completed successfully.
    I have copied the informatica session log file.
    DIRECTOR> VAR_27027 Use default value [0] for user-defined workflow/worklet variable:[$$passInStatus].
    DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
    DIRECTOR> VAR_27028 Use override value [SEBL_80] for session parameter:[$DBConnection_OLTP].
    DIRECTOR> VAR_27028 Use override value [1] for mapping parameter:[$$DATASOURCE_NUM_ID].
    DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint1].
    DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint2].
    DIRECTOR> TM_6014 Initializing session [VisibilityActivityParty_Full] at [Wed Aug 17 00:31:31 2011]
    DIRECTOR> TM_6683 Repository Name: [Oracle_BI_DW_Base]
    DIRECTOR> TM_6684 Server Name: [Oracle_BI_DW_Base_Integration_Service]
    DIRECTOR> TM_6686 Folder: [SDE_SBL_80_Adaptor]
    DIRECTOR> TM_6685 Workflow: [VisibilityActivityParty_Full]
    DIRECTOR> TM_6101 Mapping name: VisibilityActivityParty [version 1]
    DIRECTOR> TM_6827 [D:\Informatica\PowerCenter8.1.1\server\infa_shared\Storage] will be used as storage directory for session [VisibilityActivityParty_Full].
    DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
    DIRECTOR> TM_6703 Session [VisibilityActivityParty_Full] is run by 32-bit Integration Service [node01_sb8anaprd], version [8.1.1 SP5], build [0822].
    MANAGER> PETL_24058 Running Partition Group [1].
    MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
    MANAGER> PETL_24001 Parallel Pipeline Engine running.
    MANAGER> PETL_24003 Initializing session run.
    MAPPING> CMN_1569 Server Mode: [ASCII]
    MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
    MAPPING> TM_6151 Session Sort Order: [Binary]
    MAPPING> TM_6156 Using LOW precision decimal arithmetic
    MAPPING> TM_6180 Deadlock retry logic will not be implemented.
    MAPPING> TM_6307 DTM Error Log Disabled.
    MAPPING> TE_7022 TShmWriter: Initialized
    MAPPING> DBG_21075 Connecting to database [obieeprd], user [OLAP]
    MAPPING> DBG_21474 Warning: Update Strategy transform [UPDTRANS] is disabled. Set session type to [Data Driven] to enable it.
    MAPPING> TM_6007 DTM initialized successfully for session [VisibilityActivityParty_Full]
    DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
    MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Aug 17 00:31:31 2011)
    MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Aug 17 00:31:31 2011)
    DIRECTOR> PETL_24006 Starting data movement.
    MAPPING> TM_6660 Total Buffer Pool size is 36000000 bytes and Block size is 65536 bytes.
    READER_1_1_1> DBG_21438 Reader: Source is [SB8PRD], user [SIEBEL]
    READER_1_1_1> BLKR_16003 Initialization completed successfully.
    WRITER_1_*_1> WRT_8146 Writer: Target is database [obieeprd], user [OLAP], bulk mode [ON]
    WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
    WRITER_1_*_1> WRT_8397 Appending output data to file [D:\Informatica\PowerCenter8.1.1\server\infa_shared\BadFiles\w_act_party.bad] (initial size [717]).
    WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL INSERT statement:
    INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
    WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL UPDATE statement:
    UPDATE W_ACT_PARTY SET ETL_PROC_WID = ?, ACTIVITY_ID = ?, PARTY_ID = ? WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
    WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL DELETE statement:
    DELETE FROM W_ACT_PARTY WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
    WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_ACT_PARTY]
    WRITER_1_*_1> WRT_8003 Writer initialization complete.
    READER_1_1_1> BLKR_16007 Reader run started.
    READER_1_1_1> RR_4029 SQ Instance [SQ_S_ACT_EMP] User specified SQL Query [SELECT
         AEMP.ROW_ID,
         AEMP.ACTIVITY_ID,
         U.PAR_ROW_ID
    FROM
         V_ACT_EMP AEMP,
         S_USER U
    WHERE
         AEMP.EMP_ID = U.ROW_ID]
    READER_1_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
    WRITER_1_*_1> WRT_8005 Writer run started.
    WRITER_1_*_1> WRT_8158
    *****START LOAD SESSION*****
    Load Start Time: Wed Aug 17 00:31:32 2011
    Target tables:
    W_ACT_PARTY
    READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Aug 17 00:31:32 2011)
    LKPDP_1> DBG_21097 Lookup Transformation [LKP_W_ACT_PARTY]: Default sql to create lookup cache: SELECT ETL_PROC_WID,INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID FROM W_ACT_PARTY ORDER BY INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID,ETL_PROC_WID
    LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_W_ACT_PARTY] from [1048576] to [1050000].
    LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
    LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
    LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
    LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
    LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
    LKPDP_1:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_W_ACT_PARTY{{DSQ}}] instance name [LKP_W_ACT_PARTY{{SRC}}]
    LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
    LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 0
    LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
    LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
    LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_9W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_W_ACT_PARTY].
    LKPDP_1:TRANSF_1_1> DBG_21641 LKP_W_ACT_PARTY: Index cache size = [1050000], Data cache size = [2097152]
    LKPDP_1:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_W_ACT_PARTY{{DSQ}}]. Total errors [0]
    TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
    TRANSF_1_1_1> DBG_21524 Transform : LKP_W_ACT_PARTY
    TRANSF_1_1_1> DBG_21313 Lookup table : W_ACT_PARTY
    TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_W_ACT_PARTY will be the default port value
    LKPDP_2> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
    LKPDP_2> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
    LKPDP_2> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
    LKPDP_2:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
    LKPDP_2:READER_1_1> BLKR_16003 Initialization completed successfully.
    LKPDP_2:READER_1_1> BLKR_16007 Reader run started.
    LKPDP_2:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
    LKPDP_2:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_ETL_PROC_WID{{DSQ}}] instance name [LKP_ETL_PROC_WID{{SRC}}]
    LKPDP_2:READER_1_1> BLKR_16008 Reader run completed.
    LKPDP_2:TRANSF_1_1> DBG_21682 Lookup table row count : 0
    LKPDP_2:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
    LKPDP_2:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
    LKPDP_2:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_10W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_ETL_PROC_WID].
    LKPDP_2:TRANSF_1_1> DBG_21641 LKP_ETL_PROC_WID: Index cache size = [1050000], Data cache size = [2097152]
    LKPDP_2:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_ETL_PROC_WID{{DSQ}}]. Total errors [0]
    TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
    TRANSF_1_1_1> DBG_21524 Transform : LKP_ETL_PROC_WID1
    TRANSF_1_1_1> DBG_21313 Lookup table : W_PARAM_G
    TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_ETL_PROC_WID1 will be the default port value
    WRITER_1_*_1> WRT_8167 Start loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> WRT_8229 Database errors occurred:
    ORA-01400: cannot insert NULL into (ETL_PROC_WID)
    Database driver error...
    Function Name : Execute Multiple
    SQL Stmt : INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> WRT_8114
    Row # [1] in bad file
    WRITER_1_*_1> CMN_1053 : Rowdata: ( RowType=0(insert) Src Rowid=1 Targ Rowid=1
    INTEGRATION_ID (INTEGRATION_ID:Char.30:): "1-B8THY"
    DATASOURCE_NUM_ID (DATASOURCE_NUM_ID:Double:): "1.000000000000000"
    ETL_PROC_WID (ETL_PROC_WID:Double:): "(NULL)"
    TABLE_WID (TABLE_WID:Double:): "68.00000000000000"
    ACTIVITY_ID (ACTIVITY_ID:Char.15:): "1-N8FBX"
    PARTY_ID (PARTY_ID:Char.15:): "0-1"
    WRITER_1_*_1> WRT_8164 Error loading into target [W_ACT_PARTY] : Bad rows exceeded Session Threshold [1]
    WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> CMN_1022 Database driver error...
    CMN_1022 [
    ORA-24795: Illegal ROLLBACK attempt made
    Database driver error...
    Function Name : Commit
    Database driver error...
    Function Name : Rollback]
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_ACT_PARTY]
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    WRITER_1_*_1> WRT_8080 Writer run terminated. [Error loading data and error threshold reached]
    WRITER_1_*_1> WRT_8168 End loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
    WRITER_1_*_1> WRT_8035 Load complete time: Wed Aug 17 00:31:32 2011
    LOAD SUMMARY
    ============
    WRT_8036 Target: W_ACT_PARTY (Instance Name: [W_ACT_PARTY])
    WRT_8038 Inserted rows - Requested: 488 Applied: 0 Rejected: 1 Affected: 0
    WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [W_ACT_PARTY] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
    TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
    TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
    TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
    MANAGER> PETL_24031
    ***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
    Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.656254] secs, Total Idle Time = [0.390627] secs, Busy Percentage = [40.476246].
    Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.562504] secs, Total Idle Time = [0.406252] secs, Busy Percentage = [27.777928].
    Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ACT_PARTY] has completed. The total run time was insufficient for any meaningful statistics.
    MANAGER> PETL_24005 Starting post-session tasks. : (Wed Aug 17 00:31:33 2011)
    MANAGER> PETL_24029 Post-session task completed successfully. : (Wed Aug 17 00:31:33 2011)
    MAPPING> TE_7216 Deleting cache files [PMLKUP12190_9W32] for transformation [LKP_W_ACT_PARTY].
    MAPPING> TE_7216 Deleting cache files [PMLKUP12190_10W32] for transformation [LKP_ETL_PROC_WID].
    MAPPING> TM_6018 Session [VisibilityActivityParty_Full] run completed with [0] row transformation errors.
    MANAGER> PETL_24002 Parallel Pipeline Engine finished.
    DIRECTOR> PETL_24013 Session run completed with failure.
    DIRECTOR> TM_6022
    SESSION LOAD SUMMARY
    ================================================
    DIRECTOR> TM_6252 Source Load Summary.
    DIRECTOR> CMN_1740 Table: [SQ_S_ACT_EMP] (Instance Name: [SQ_S_ACT_EMP])
         Output Rows [50592], Affected Rows [50592], Applied Rows [50592], Rejected Rows [0]
    DIRECTOR> TM_6253 Target Load Summary.
    DIRECTOR> CMN_1740 Table: [W_ACT_PARTY] (Instance Name: [W_ACT_PARTY])
         Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [1]
    DIRECTOR> TM_6023
    ===================================================
    DIRECTOR> TM_6020 Session [VisibilityActivityParty_Full] completed at [Wed Aug 17 00:31:33 2011]
    Can some one help me to debug the issue please ?
    Thanks

    Hi Nat,
    Thanks a lot for your response.
    I am running this ETL task from DAC. This task is a part of Daily Full load ETL. As i mentioned earlier, this task fails sporadically and failing till now. After restarting the ETL, it gets completed.
    Please let me know if you have any question.
    Thanks,
    Neeraj

  • Load Failure

    hi all,
    I am getting a following errors when I am loading data,
    theses are the message I am getting from details, is I have to check in r/3 or bw?pls give us the solution
    Requests (messages): Everything OK
    Data request arranged
    Confirmed with: OK
    **Extraction (messages): Errors occurred
    Data selection scheduled
    Error occurred in the data selection

    Hi.......
    As mentined above check the error in the DEtails tab of the IP monitor........
    1)  It may be due to Time limit Exceed.........Then reduce the data packet size and repeat the load.......
    2)If it is due to Replication issue.........then replicate the datasource and then activate the transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL.........
    But before repeating any load........check the extraction job......if it is still active then first kill it........otherwise your load will failue to lock issue......
    Regards,
    Debjani........
    Edited by: Debjani  Mukherjee on Sep 25, 2008 7:48 AM

  • BizTalk admin console error Provider load failure

    Hi,
    I am facing issue with BizTalk admin console, getting below error, 
    i  thought it will be due to sql server or WMI so restarted sql services as well WMIS services but no luck. restarted Distributed transaction services as well as restarted machine but it did not solve.
    TITLE: BizTalk Server Administration
    Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
    For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders&EvtChain=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors+%2cFailedLoadingGroupProviders
    ADDITIONAL INFORMATION:
    Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
    For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders
    Provider load failure  (System.Management)
    after looking at event viewer i can see few more error messages, 
    Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x52158765
    Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532943a3
    Exception code: 0xe0434352
    Fault offset: 0x00011d4d
    Faulting process id: 0x215c
    Faulting application start time: 0x01d004a6e0c31506
    Faulting application path: C:\windows\SysWOW64\mmc.exe
    Faulting module path: C:\windows\SYSTEM32\KERNELBASE.dll
    Report Id: 3d994be7-709f-11e4-80ee-00505689506c
    Faulting package full name: 
    Faulting package-relative application ID:
    Application: mmc.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.Reflection.TargetInvocationException
    Stack:
       at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.OnThreadException(System.Object, System.Threading.ThreadExceptionEventArgs)
       at System.Windows.Forms.Application+ThreadContext.OnThreadException(System.Exception)
       at System.Windows.Forms.Control.WndProcException(System.Exception)
       at System.Windows.Forms.Control+ControlNativeWindow.OnThreadException(System.Exception)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
       at System.Windows.Forms.UnsafeNativeMethods.IntDestroyWindow(System.Runtime.InteropServices.HandleRef)
       at System.Windows.Forms.UnsafeNativeMethods.DestroyWindow(System.Runtime.InteropServices.HandleRef)
       at System.Windows.Forms.NativeWindow.DestroyHandle()
       at System.Windows.Forms.Control.DestroyHandle()
       at System.Windows.Forms.Control.Dispose(Boolean)
       at Microsoft.BizTalk.Administration.SnapIn.Forms.GroupHub.OperationsCtrl.Dispose(Boolean)
       at System.ComponentModel.Component.Dispose()
       at Microsoft.ManagementConsole.FormView.InternalShutdown()
       at Microsoft.ManagementConsole.View.HandleShutdownRequest(Microsoft.ManagementConsole.Internal.IRequestStatus)
       at Microsoft.ManagementConsole.View.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
       at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
       at Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
       at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(Microsoft.ManagementConsole.Internal.IMessageClient, Microsoft.ManagementConsole.Internal.RequestInfo)
       at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
       at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(Microsoft.ManagementConsole.Executive.SimpleOperationCallback)
       at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
       at System.Reflection.RuntimeMethodInfo.UnsafeInvoke(System.Object, System.Reflection.BindingFlags, System.Reflection.Binder, System.Object[], System.Globalization.CultureInfo)
       at System.Delegate.DynamicInvokeImpl(System.Object[])
       at Microsoft.ManagementConsole.Executive.DelegateMessage.OnExecute()
       at Microsoft.ManagementConsole.Executive.Message.Execute()
       at Microsoft.ManagementConsole.Executive.SnapInThread.DispatchPendingSnapInMessages()
       at Microsoft.ManagementConsole.Executive.SnapInThread.OnDataReadyAsync(System.Object, System.EventArgs)
       at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.WndProc(System.Windows.Forms.Message ByRef)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
       at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
       at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
       at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
       at System.Windows.Forms.Application.Run()
       at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
       at Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
       at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
       at System.Threading.ThreadHelper.ThreadStart_Context(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
       at System.Threading.ThreadHelper.ThreadStart()
    does any one face similar issue if yes can you please help me to solve this?
    Regards,
    Amit
    Regards, Amit More

    here is log generated during configuration,
    [2014-11-24 05:16:10:0572 Info Configuration Framework]Configuring feature: WMI
    [2014-11-24 05:16:10:0588  Info BtsCfg] Entering function: CBtsCfg::ConfigureFeature
    [2014-11-24 05:16:10:0588  Info BtsCfg] Configuring feature: WMI
    [2014-11-24 05:16:10:0588  Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer
    [2014-11-24 05:16:10:0588  Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer
    [2014-11-24 05:16:10:0588  Info BtsCfg] Entering function: CWMI::Connect
    [2014-11-24 05:16:10:0588  Info BtsCfg] Leaving function: CWMI::Connect
    [2014-11-24 05:16:10:0603  Info BtsCfg] Entering function: CWMI::CreateGroup
    [2014-11-24 05:16:10:0791  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(438): FAILED hr = 80041013
    [2014-11-24 05:16:10:0791  Error BtsCfg] Provider load failure
    [2014-11-24 05:16:10:0791  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btscfg.cpp(1801): FAILED hr = 80041013
    [2014-11-24 05:16:10:0791  Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature
    [2014-11-24 05:16:10:0791  Info BtsCfg] Unconfiguring feature: WMI
    [2014-11-24 05:16:10:0791  Warning BtsCfg] BTS management server or DB names are not found in the registry.
    [2014-11-24 05:16:10:0791  Info BtsCfg] Entering function: CWMI::StopHostInstance
    [2014-11-24 05:16:10:0807  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1553): FAILED hr = 80041013
    [2014-11-24 05:16:10:0807  Error BtsCfg] Provider load failure
    [2014-11-24 05:16:10:0807  Info BtsCfg] Entering function: CWMI::UnMapHost
    [2014-11-24 05:16:10:0807  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1698): FAILED hr = 80041013
    [2014-11-24 05:16:10:0807  Error BtsCfg] Provider load failure
    [2014-11-24 05:16:10:0807  Info BtsCfg] Instantiating IBTSMsgBoxPerformance object
    [2014-11-24 05:16:10:0869  Info BtsCfg] Calling IBTSMsgBoxPerformance::UninstallArtifacts
    Exception in CounterManager.UninstallArtifacts when uninstalling the perf counter instances. The exception details are: 
    Source of exception: System
    Message: Cannot delete Performance Category because this category is not registered or is a system category.
    Stack trace:    at System.Diagnostics.PerformanceCounterCategory.Delete(String categoryName)
       at Microsoft.BizTalk.MsgBoxPerfCounters.MgmtDbAccessEntity.UninstallInstances(Boolean regularUninstall)
       at Microsoft.BizTalk.MsgBoxPerfCounters.CounterManager.UninstallArtifacts(Boolean regularUninstall, String logFileName)
    [2014-11-24 05:16:11:0166  Info BtsCfg] Stopping Tracing
    [2014-11-24 05:16:11:0166  Info BtsCfg] Entering function: CWMI::DeleteServer
    [2014-11-24 05:16:11:0182  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1353): FAILED hr = 80041013
    [2014-11-24 05:16:11:0197  Error BtsCfg] Provider load failure
    [2014-11-24 05:16:11:0197  Info BtsCfg] Entering function: CWMI::UnConfigureGroup
    [2014-11-24 05:16:11:0197  Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1076): FAILED hr = 80041013
    [2014-11-24 05:16:11:0197  Error BtsCfg] Provider load failure
    [2014-11-24 05:16:11:0197  Info BtsCfg] Leaving function: CBtsCfg::UnConfigureFeature
    [2014-11-24 05:16:11:0197  Info BtsCfg] Leaving function: CBtsCfg::ConfigureFeature
    [2014-11-24 05:16:11:0213 Warning Configuration Framework]Feature failed to configure: WMI.
    [2014-11-24 05:16:11:0400 Info Configuration Framework]Configuration Summaries:
    [2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [Group] Failed to configure with error message [Provider load failure
    [2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BizTalk Runtime] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
    [2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Tools] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
    [2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Portal] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: SSOServer,Engine Configuration Enabled: yes
    Sub UI: no Configured: yes
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: SSOServer,Engine Configuration Enabled: no
    Sub UI: yes Configured: yes
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: WMI Configuration Enabled: yes
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: Engine,BTSCfg Configuration Enabled: no
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: RulesEngine Configuration Enabled: yes
    Sub UI: no Configured: yes
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: MOT Configuration Enabled: yes
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: BAMTools Configuration Enabled: no
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: BAMTools Configuration Enabled: no
    Sub UI: yes Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: BAMPortal Configuration Enabled: no
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]
    Feature: MsEDIAS2 Configuration Enabled: no
    Sub UI: no Configured: no
    [2014-11-24 05:16:11:0400 Info Configuration Framework]Leaving function ConfigureFeatures().
    [2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function WizardStep_NextStepChanged.
    [2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function ConfigWizardResult_Load.
    [2014-11-24 05:16:11:0447 Info Configuration Framework]Leaving function ConfigWizardResult_Load.
    [2014-11-24 05:16:11:0478 Info Configuration Framework]Leaving function WizardStep_NextStepChanged.
    [2014-11-24 05:16:14:0416 Info Configuration Framework]Displaying information notification to user. Message: <Exception Message="Provider load failure
    " Source="" HelpID="" />
    Regards, Amit More

  • SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

    Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
    I’ve tried several ways to fix these issues with no success.
    I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
    WHEN OPENING BIDS:
    I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
    . They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
    ONCE BIDS IS OPEN:
    No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
    TITLE: Microsoft Visual Studio
    There were errors while the package was being loaded.
    The package might be corrupted.
    See the Error List for details.
    BUTTONS:
    OK
    . . . and these errors in the Error List at the bottom of the IDE:
    Error      1             
    Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
    for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". 
            C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx   
    1               
    1             
    Error      2             
    Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". 
            Package.dtsx    
    0             
    0             
    Error      3             
    Validation error. Execute SQL Task : There were errors during task validation. 
       Package.dtsx    
    0             
    0               
    Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
    The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
    Microsoft.SqlServer.SqlCEDest.dll
    Microsoft.SqlServer.Management.CollectorTasks.dll
    Microsoft.SqlServer.SQLTask.dll
    System.Data.SqlServerCe.dll
    Microsoft.Synchronization.Data.SqlServerCe.dll
    (above dll repeated at bottom of message)
    After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
    as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
    If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
    items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
    In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
    and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
    out either).
    After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
    files or information you may require.
    CBS

    try: Devenv.exe /ResetSettings
    http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
    Or try this (it's for 2005, but maybe it works for 2008 aswell):
    http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
    or try
    http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
    "You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files.  I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
    without warning"
    Please mark the post as answered if it answers your question | My SSIS Blog:
    http://microsoft-ssis.blogspot.com |
    Twitter

  • I am unable to load some web pages, I get an error message saying unable to load page due to invalid or unsupported form of compression, this happens on the BBC news page for example. Any ideas how to overcome???

    OS is Windows7. I'm using the latest version of Mozilla Firefox
    I am unable to load some web pages, I get an error message saying unable to load page due to invalid or unsupported form of compression, this happens on the BBC news page for example. Any ideas how to overcome???

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • The Game Center is "unable to load data due to network connectivity issues or errors".

    The Game Center is "unable to load data due to network connectivity issues or errors".
    My internet is fine: all other apps that do not rely on the Game Center work, as does my browser and other online functions; additionally, a friend's iPhone connects to his Game Center perfectly while he is sitting next to me.
    Closing the Game Center app and then reopening it is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then logging back in, and then reopening the Game Center is ineffective. Opening the options for the Game Center in the settings, logging out of my Apple ID, then reopening the Game Center app and logging back in from there is ineffective.
    This issue has gone on for more than a month, and so the phone has gone through all variations of "turn it off then back on again, refresh the system, etc etc" that are the basic first suggestions for trouble shooting.
    One game app, which required a Game Center profile to launch, stopped working entirely, and would return a message saying something like "connect to the Game Center". I eventually deleted it to free up space. Other games which can be linked to the Game Center to connect with friends simply fail to link, returning "Game Center unavailable". This is the aspect that is currently bothering me the most: I cannot play games with friends unless the app can also link to Facebook and connect to friends from there.
    When I open the Game Center, I see the following screen. The bubbles float gently, and it seems as if I had the ability to update my "status". However doing so results in a message that has vanished once the app is reopened.
    Upon tapping Games, either the bubble from the main screen or the option on the ribbon at the bottom, the following screen appears. Clicking on Challenges shows a message that achievements must be viewed to issue a challenge. Clicking achievements results in a message that games must be connected (and from my friend's phone I know I have several apps that should appear).
    Upon tapping friends, it does show me a list of suggested friends pulled from Facebook, but attempting to send a friend request results in the following screen. After accepting the error box, the "send" button for the request is grayed out and unavailable regardless of adding or deleting friends and/or an accompanying message.
    In short, the Game Center is completely unresponsive for no discernible reason, and this problem began with no warning and is now long term. Though my iPhone is older (a 4s), my friend's is even older (a regular 4) and works fine.

    I am having the very same problem on my iPad running ios 7. All is fine on my iPhone it opens no problem - this is running on ios 8. I wish they would fix it.

  • Install failure due to "faulty DVD" problem: only with Family Pack?

    After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.

    I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
    Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
    Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
    In time it will sort itself out, but in the meantime the rooms are full of smoke

  • Logon failure due to an internal error-webi client tool

    Hi experts,
    I've installed WebI client tool 4.0, when I trying to logon this message appear: Logon failure due to an internal error,
    this problem has been addressed before, but could not be resolved [http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144|http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144]
    there is a way to solve this problem?
    regards,
    Jonathan.

    In a Unix environment the version is in the file “AddorRemoveProduct.sh” located in the installation folder of BI4.x
    For the updated reference table of the versions / builds and corresponding patch levels,  please see KB article # 1602088
    BI 4.0 RTM
    14.0.0.760
    Patch 04
    14.0.0.904
    Patch 05
    14.0.0.918
    Patch 06
    14.0.0.940
    Patch 07
    14.0.0.954
    Patch 08
    14.0.0.970
    Patch 09
    14.0.0.986
    Patch 10
    14.0.0.996
    Support Pack 1
    14.0.1.287
    Patch 1.1
    14.0.1.313
    Patch 1.2
    14.0.1.330
    Patch 1.3
    14.0.1.342
    Patch 1.4
    14.0.1.360
    Patch 1.5
    14.0.1.375
    Patch 1.6
    14.0.1.397
    Support Pack 2
    14.0.2.364
    Patch 2.1
    14.0.2.388
    Patch 2.2
    14.0.2.397
    Patch 2.3
    14.0.2.416
    Patch 2.4
    14.0.2.439
    Patch 2.5
    14.0.2.455
    Patch 2.6
    14.0.2.481
    Patch 2.7
    14.0.2.508
    Patch 2.8
    14.0.2.532
    Patch 2.9
    14.0.2.556
    Patch 2.10
    14.0.2.565
    Patch 2.11
    14.0.2.594
    Patch 2.12
    14.0.2.619
    Patch 2.13
    14.0.2.641
    Patch 2.14
    14.0.2.657
    Patch 2.15
    14.0.2.682
    Patch 2.16
    14.0.2.703
    Feature Pack 3
    14.0.3.613
    Patch 3.1
    14.0.3.630
    Patch 3.2
    14.0.3.657
    Patch 3.3
    14.0.3.678
    Patch 3.4
    14.0.3.691
    Please note that at today FP03 is in RampUp

Maybe you are looking for

  • Read Only access to tablespace

    Hi, Oracle 10.2.0.4 How can I grant read only access to a tablespace for a user. Thanks

  • Error in Credit Transactions form

    Hi, When I query a transaction and then go to Action -> Credit I am getting the below error. Could you please help? User Exit 'CURRENCY_INFO' was called with invalid arguments. Thanks, Bhanu

  • Resize raid volumes?

    Hello, I have a raid 5 (hardware) on my pro. With two raid volumes. Now i have change of mind with the size of those volumes. I know i can resize partitions, but is there also a way that i can resize a partion and give the free space to a diverent ra

  • Homesharing on my iphone 4s stops half way

    Homesharing on my iphone 4s stops when it come half way? What do I do wrong? :-) I have restarted router, logged in and out of homesharing on all my devices and macs. (I have a huge music library) Regards Tor

  • Sony hinting they might not fix issues

    If highlighted part of the text why Dear Mr anonymous, Please summarize the reported issues experienced by product so that I may accurately feed this back to the technical team. I believe the Jellybean update may be released soon as you were previous