Load FLV from library into FLVPlayback?
Is this possible? I've figured out dynamically loading an external FLV, but I'd like to be able to do it from my library. Really appreciate any help.
no.
but you can import an flv to a movieclip timeline and you can instantiate the movieclip using the "new" constructor.
Similar Messages
-
How to load data from Quikbooks into PeopleSoft General Ledger module ?
Folks,
Hello.
My client's data is currently stored in Quikbooks.
After install PeopleSoft FSCM 9.0, I need to load the data from Quickbooks into PeopleSoft General Ledger module. But I don't know how to use PeopleSoft Integration Broker to integrate with Quikbooks.
Can any folks tell me how to load data from Quikbooks into PeopleSoft General Ledger module ?Hi,
If the data load is one time process, then you can use PL/SQL or datamover to load the data to PeopleSoft application.
If you want to load the data in real time, then you need to create In-bound and out-bound nodes to perform the transaction.
Thanks
Soundappan -
Can't copy a song from library into playlist. Screen message says "song can't be found." I know it's there, how do I access it?.
I fixed this issue (with help from tech support) and it involved several things.
After adding a song to iTunes, right-click on the song in iTunes and select "Update iTunes Match."
OR go to the iTunes menu-->Store-->Update iTunes Match.
Maybe that's the reason, it just hadn't updated to the cloud.
OR maybe it's not a high-enough bitrate file. This happens to me because most of my tunes are home-recorded.
Sometimes converting to .mp3 or Create AAC version might work. (You do this with a right-click in iTunes, and then you will want to remove the original file from iTunes.)
There is an iTunes Preferences setting, under General Preferences called Import Settings. Try setting it to AAC Encoder and iTunes Plus. That (I think) causes imports to be slightly better quality.
Good luck! The tech support person at Apple is requesting that a knowlege-base article be written about this. -
Using one instance of a Movie Clip to load Graphics from library
Hi all,
another question... How would i go about loading a variable into a movie clip and have it pull different graphics from my library at different spots in the main timeline???
thanks!
PatrickHi NED! thank you for all your help so far!!!
I was wondering about the flexability of loading movies into a movie clip.
Currently, thanks to your help i am well able to load one movie into a movie "loader" clip, but thought maybe there is a way to load additional movie clips into that same "loader" clip, as i am starting to accumulate several different graphics that i need to have be inside movie clips so that i can make them change colors on the same frame when needed.
i shot from the hip and tried this code, but didnt have any luck:
mc_LCD_loader.attachMovie("hilight", "g", 1), ("header", "X", 1);
mc_LCD_loader.g._x = 0;
mc_LCD_loader.g._y = 1000;
mc_LCD_loader."X"._x = 0;
mc_LCD_loader."X"._y = 1000;
- - - where "hilight" is the identifier name of a given movie clip and "header" is the identifier of a given movie clip in the same library...
"hilight" loads fine
i dont fully understand what "g" means to the identifier...
i am just unsure of how or if it is even possible to load another MC into the same MC Loader...
is it possible? if so could you give me a hint?
thank you!
- patrick -
Hi all
I have a Movieclip with a base name called 'movie_main' and class name as 'Main_mc'
I am trying to load the movie from the library into a contanier that also loads in a tooltip. The container is called 'holder'
this is the script I am working with
var movie_main:Main_mc = Main_mc();
holder.addChild(movie_main);
problem is when it loads in other parts of my menu are missed placed.
Question:
is this the correct script I should use?? Is there issues with loading in more than 1 movieclip into one contanier??
aaarrrggggghhhhh!!!!!!!
help pleasemaybe this will help, this is my script for loading in tooltip
var tooltip:ToolTip = new ToolTip();
tooltip.field.text = titles;
tooltip.field2.text = texts;
tooltip.x = -350; // where to have the tooltip on x axis in the holder
tooltip.y = 0; // where to have the tooltip on y axis in the holder
holder.addChild(tooltip);
// Same proceedure as before
holder.buttonMode = true;
holder.addEventListener( MouseEvent.CLICK, onMenuItemClick );
// Add it to the menu
circleMenu.addChild(holder);
and this is what I am trying to also add also to the same container
var movie_main:Movie_mc = new Movie_mc();M
holder.addChild(movie_main);
is there a way to combine all in one?? -
How to load hierarchy from file into InfoObject with compounding Attr & LN
Hi,
I have created an InfoObject called YCOSTC0 which has a compounding attribute 0CO_AREA. and Text is Lanugage dependent, hence the key is YCOSTC0, 0CO_AREA and LANGUAGE, now when i load hierarchy from flat file as mentioned below, it creates duplicate blank rows in master data table, becuase the flat file contains only the YCOSTC0 Info Object and this data gets loaded into 0CO_AREA column in master data table which is the first column. how can i load hierarchies from flat file into an InfoObject that has a compounding attribute and Language dependent. please provide me a sample file structure with data.
NodeID InfoObject Node Name Link Name Parent ID Language Short Text Medium Text Long Text
1 0HIER_NODE CC_HIER EN Cost Center Heirarchy Cost Center Heirarchy Cost Center Heirarchy
2 YCOSTC0 C001 1 EN CC 1 Cost Center 1 Cost Center 1
3 YCOSTC0 C002 2 EN CC 2 Cost Center 2 Cost Center 2
4 YCOSTC0 C003 2 EN CC 3 Cost Center 3 Cost Center 3
5 YCOSTC0 C004 3 EN CC 4 Cost Center 4 Cost Center 4
6 YCOSTC0 C005 3 EN CC 7 Cost Center 7 Cost Center 7
7 YCOSTC0 C006 4 EN CC 5 Cost Center 5 Cost Center 5
8 YCOSTC0 C007 4 EN CC 8 Cost Center 8 Cost Center 8
9 YCOSTC0 C008 4 EN CC 10 Cost Center 10 Cost Center 10
10 YCOSTC0 C009 7 EN CC 6 Cost Center 6 Cost Center 6
11 YCOSTC0 C010 6 EN CC 9 Cost Center 9 Cost Center 9
Thanks
Akila RHi -
Check the following link.
Hierarchy Upload from Flat files
Anesh B -
Insert item from library into text
I am wondering if anyone knows how to insert an item from a library into a text or graphics frame programmatically? Are items in the library referenced by their names or do they have unique IDs
I have a custom bullet that I have not yet converted to a font and I don't want to have to manually insert the bullet into each line of text I want. I have a tag where the bullet should go and I just want to replace the tag with the bullet.
I know this is pretty strange but I am sure someone has experience with this.
Thanks in advanceChoose it from where? See this user tip by Terence Devlin for how to access photos for use outside of iPhoto: How to Access Files in iPhoto
Have you tried dragging the photo from the iPHoto window into the open Word document window?
OT -
Loading Variables from ASP into Flash
I can find plenty of tutorials detailing how to load
variables from a defined asp page into Flash, but here's my
dilemma...
I have an asp page that is reading a URL with a unique
identifier in it (www.sampleURL.com?id=123456), and then turns the
id number from the URL into a variable. On the same page then, sits
my swf where I need to use LoadVars to pull in that ASP variable
via Actionscript. If I don't have a static asp page to pull the
variables in from and I want to pass the variable within the same
asp page the swf is located on, how do I do it? Many thanks in
advance..."bonzomn65" <[email protected]> wrote in
message
news:ej0630$pjh$[email protected]..
>I can find plenty of tutorials detailing how to load
variables from a
>defined
> asp page into Flash, but here's my dilemma...
>
> I have an asp page that is reading a URL with a unique
identifier in it
> (www.sampleURL.com?id=123456), and then turns the id
number from the URL
> into a
> variable. On the same page then, sits my swf where I
need to use LoadVars
> to
> pull in that ASP variable via Actionscript. If I don't
have a static asp
> page
> to pull the variables in from and I want to pass the
variable within the
> same
> asp page the swf is located on, how do I do it? Many
thanks in advance...
>
You don't need LoadVars for this at all. You can just pass
the variable to
your Flash movie by specifying a query string when you are
calling the
movie.
If you are using the straight object, embed method then it
would look
something like this:
<param name="movie" value="movie.swf?id=11111">
<embed src="movie.swf?id=11111" ... >
If you are using the ActiveContent JavaScript for your movie
then you just
leave off the .swf... so
"name", "movie?id=11111"
Then, in flash you can access the value of id from the _root,
like
var idInFlash:Number = _root.id;
Of course in the above example you would replace 11111 with
the proper
syntax for printing a variable's value in ASP. -
Load swf from memory into FlahPlayer ActiveX
Hello,
I am developing an application which must load a swf file
into the
activex directly from memory. My development is almost
complete but I
have a problem with the last part of the implementation.
I am using an implementation of IBindHost, and passing the
stream
trough an IMoniker implementation.
I don't know if someone here can help me, if so I will
explain deeply
my question.
Thanks,
Vicente.Hello,
I am developing an application which must load a swf file
into the
activex directly from memory. My development is almost
complete but I
have a problem with the last part of the implementation.
I am using an implementation of IBindHost, and passing the
stream
trough an IMoniker implementation.
I don't know if someone here can help me, if so I will
explain deeply
my question.
Thanks,
Vicente. -
Load swf from memory into FlashPlayer ActiveX (Visual C++)
Hello,
I am developing an application which must load a swf file
into the
activex directly from memory. My development is almost
complete but I
have a problem with the last part of the implementation.
I am using an implementation of IBindHost, and passing the
stream
trough an IMoniker implementation.
I don't know if someone here can help me, if so I will
explain deeply
my question.
Thanks,
Vicente.Hello,
I am developing an application which must load a swf file
into the
activex directly from memory. My development is almost
complete but I
have a problem with the last part of the implementation.
I am using an implementation of IBindHost, and passing the
stream
trough an IMoniker implementation.
I don't know if someone here can help me, if so I will
explain deeply
my question.
Thanks,
Vicente. -
Not authorized...cannot load songs from iTunes into iMovie
Hello,
I was importing some songs from iTunes into iMovie, something I've always done and never had a problem with before, until this wknd. After I had loaded in the songs into my iMovie timeline, and they played just fine, I then started getting pop-up boxes with the msg. stating: "This computer is not authorized to play...mp4... If you purchased this song you can open iTunes and authorize this computer to play this song by entering your Apple ID password." I did indeed click on the link to authorize, and put in my password, and then when I tried loading the song again, I got another pop-up box w/an Error msg. What gives? I have never seen this before. I checked out the authorization on my computer in iTunes, and it did state that I am authorized (I am the only one who uses the computer). I read some of the posts, do I have to De-authorize, then authorize again? I just don't understand the problem. I even tried burning the songs I wanted onto a disc, then tried re-importing them to iTunes, and it was still the same problem! I thought the whole idea of iTunes was to be able to play them with a project.
Any suggestions would be most appreciated, thank you.It is a bug that Apple is aware of and apparently working on. I think it is an iTunes bug since it seems to effect both iDVD and iMovie. See these for a few examples...
http://discussions.apple.com/thread.jspa?messageID=5183605�
http://discussions.apple.com/thread.jspa?messageID=5247887�
http://discussions.apple.com/thread.jspa?messageID=5051259�
http://discussions.apple.com/thread.jspa?messageID=5311086�
Patrick -
Load variables from XML into Flash
I was wondering how to load variables from an XML document to
a Flash file? I am familiar with the code to do it for a text file,
but was wondering how to do it for XML.
Many thanks in advance!
JJThanks for the recommendation on the site. What I am trying
to do is load varaibles from an XML file into text boxes in my
flash movie.
Here is my loading:
var my_xml = new XML();
my_xml.ignoreWhite = true;
my_xml.onLoad = function(success){
if (success) {
gotoAndStop("slide01");
my_xml.load("narration.xml");
this is what I have on my frame with the text boxes (the text
boxes are also have the variable name in the variable area)
var narration = my_xml.picture01;
var my_title = my_xml.my_title;
var my_date = my_xml.my_date;
should I do my_date.text = my_xml.my_date; instead?
my xml doc looks like this
<?xml version="1.0" encoding="iso-8859-1"?>
<picture01>This is the text for picture
01</picture01>
<picture02>This is the text for picture
02</picture02>
<my_title>Las Vegas</my_title>
<my_date>October</my_date>
Any help on this would be GREATLY appreciated!
Text
my_date.text = my_xml.my_date; -
IPod Nano - iPOD auto updates - can't load music from library to music file
Every time I plug my nano in it automatically updates. How do I stop this?
Also I cannot load songs from my iTunes library to my personal music file. There is a padlock that appears to the right of the bar that indicates space useage at the bottom of the page. I am not sure if that has anything to do with not being able to load songs from my library to my personal music file. PLEASE HELP I AM DESPERATE!!
ParrottGrey text when you look at the content and lock symbol at the bottom of the screen simply shows that your iPod is set to automatically update. If you want to access your iPod directly, drag songs to it, play it through your iTunes, connect it to a second computer etc. you just need to change the update method to "Manually manage songs and videos" in the iPod Summary tab and click Apply. The text will change from grey to dark and the padlock will disappear: Managing content manually on iPod
One thing to be aware of with manually updating is that the iPod also has to be manually ejected before the "Do Not Disconnect" message will go away. Safely disconnect iPod -
How to load my old library into my new computer
I was recently using a PowerPC G4 with OS X 10.5 and recently upgraded to a Mac Mini with OS X 10.9. I want to restore my iTunes library from the old computer since it took a long time to get all the playlists together. I moved over the old playlist files and of course all my music, but I cannot get the library to show. I had to move my iTunes library into that "automatically add to iTunes" folder to get it to show in iTunes, but I still can't get the playlists and stuff to come up. I did the thing where I hold down the option key while starting up and then choose the library, but nothing changes in iTunes. It also seems like the file that might really be my library isn't selectable. So is there anyway that I can get my old library into the new iTunes on my new computer?
Start by reading through wjosten's user tip: https://discussions.apple.com/docs/DOC-3141 and also look at using Migration Assistant, or other means of connecting the two computers. A fast way I have used to move data is to connect the two using a simple ethernet wire, then open the hard drive of the old machine and drag-and-drop the material you want to copy over to the new machine's hard drive...appropriate application library in this case, of course.
That moves large amounts of material pretty quickly. -
Error while loading data from DS into cube
Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
RohitHi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja
Maybe you are looking for
-
Can I open Logic 9 projects in earlier versions of Logic?
I will be using a Logic Express project between two Macs. One Mac will have Logic 9, and one with Logic 8. Will the same project be able work between the two versions without any hassle? Thanks!
-
How can I find a specific book?
I'm trying to find out if a specific book is going to be released to iBooks. I have the 13-digit ISBN number, and I found this page: http://www.apple.com/itunes/affiliates/resources/blog/using-isbns-with-the-ibook store.html However, when I use the
-
Dynamically creating pages when the form is rendered to the user
Hi exeprts I am trying to find out a way in which my livecycle designer form will be able to create a new pages based on a certain field value which is a part of xfa.data.datasets. Say I have to generate the payslip of 5 employee - My form should be
-
just got my iPad 3, how to install Siri? do I need to install iOS 5?
-
Calling inherited method of object
Dears, I have this problem: test case -- base type create or replace type T_integer as object val Number, member procedure set_value( pValue Number) ) not final instantiable create or replace type body T_integer IS member procedure set_value( pValue