Loaded Forms on the screen and the underline link between the forms-Callee

Hi Dear Experts,
I am wondering wehter you would be able to shed some lights on the follwoing and on how SAP handles below situations:
In SAP when loading up two documnts and try to add items to each using 'List of Items' screen, the systme is clever enough to return back the item code to the relevant screen.
I need to know that how SAP is holding this trail of formids when returning the select item code to fill in the document lines on the origianl caller doc.
Is it some kind of  internal array structures or it could be a table in the database which contains the list of loaded forms on the screen and the revelant callee and caller ids.
Many thanks in advance.
Maryam Gharib.

Hi Maryam Gharib,
You may check this first: how to work with multiple forms
Thanks,
Gordon

Similar Messages

  • HT4623 i forget my lock screen and i went link to restart my i phone

    i forger my lock screen and i need link to resraert my i phone

    http://support.apple.com/kb/HT1212

  • L2 and L3 Routed Link between 2 COREs

    Hi
    What is the difference between L2 (Dot1q) and L3 Routed Link between 2 COREs in term of Functionality 
    thanks

    Hello Ibrahim ,
    I will try to explain , 
    VLANs put tag on frames to ensure packet do not leave layer 2 broadcast domain and yet will reach to all ports part of that vlan ( as per tag ) .
    Layer 3 SVIs on other hand provides layer 3 reachability for vlans and hosts inside layer 2 vlan . To achieve this all layer2 vlan host provide with related layer 3 SVIs ip address as gateway .
    I hope you got it by now . 
    HTH
    Sunil Bhadauria 
    ! Kindly rate all helpful posts  and accordingly mark correct answers to help forum !

  • A6518f turn on diagnostic page then windows is loading files then blue screen and unresponsive

    Pavilion a6518f, Turn power on get diagnostic sreen, then get windows is loading files, then get a blue screen with a big arrow cursor and thats all...non responsive

    Troubledguy, welcome to the forum.  We'll try to get you smiling again.
    When I hear these symptoms, I consider two main components: 1) the hard drive and 2) the memory.  Here is a guide to help you run the SMART test on the hard drive from the BIOS.  It will tell you if the hard drive is failing or has failed.  You can test the memory by removing all of the modules and replacing them one at a time and booting.  Place the single module in the slot closest to the processor.
    Figure 3: layout
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • After errors with disk partition, I removed Windows from my iMac. Now when I start my computer it goes into a black screen and not straight into the Mac area like it used to, unless I hold Alt straight away to give me the option.  Any help?

    Hi,
    Sorry, I'm new to the community, so apologies if I'm repeating myself.
    OK, so I tried to install Windows Vista onto my iMac with the disk partition.  Everything was going fine and it wasn't until last minute, when it was installed that an error came up saying that this can only be done with Windows 7.  After this error, I couldn't access any errors of my iMac and when I shut down and restarted my computer, it automatically logged into Windows.
    So after a panic, I rang Apple Care and the lady helped me log into my apple area, delete Windows from my iMac, and all was restored.
    However, now when I shut down my computer and boot it back up, I think my iMac is trying to log into Windows areas that no longer exist.  It loads up a black screen and doesn't move from there.  To log into my Apple area, I have to do the whole process of holding Alt immediately after I switch the power on and access the Mac drive and log in that way.
    It's beginning to become a real pain and I'm paranoid this process is going to damage my computer.  Any advice on how to restore logging-in back to it's former glory when I first purchased it?
    Thanks

    Solved it.  Thank you very much for that!

  • Powerbook G4 Loads to blue screen and stops!!!!

    Hi,
    I am running OS x 10.5.8 on my g4 powerbook. Its been no problem since I updated several months ago. Just in the past couple days my computer has been doing many odd things. Not loading sound drivers, slow operation and most painful is that when start up happens, it loads to the blue screen and stops and will remain there for some time and I have hard reset it. Then I try again usually 2-3 times. I have completed the permission repairs and done PRAM twice. Still loads up to blue screen and remains..
    Can you please help me!!!

    Try starting up from your latest OS installer CD or DVD. If the machine starts up from the disc, open Disk Utility from the Utilities menu in the Installer application, select your internal hard drive, click the First Aid tab, and check the hard drive's SMART status near the bottom of the DU window. If it is Verified, run the Repair Disk routine, and if any repairs are needed, run that routine repeatedly until no further problems are noted and repaired. Then try starting the machine normally from its hard drive.
    If the hard drive's SMART status is Failing, replace the drive. You can salvage un-backed-up files from it after you get your machine back up and running again.

  • Web Analysis link is  loading up just Blue screen

    When clicking from workspace link->web analysis . It's loading a blank blue screen and message is coming client loaded.
    Any help will be appreciated.
    Thanks In advance.
    MohanBir

    Can you get to Web Analysis directly :-
    http://<servername>:16000/WebAnalysis/WebAnalysis.jsp
    Try running Web Analysis in the foreground and not as a service to check for any noticable error messages.
    John

  • Failed to retrieve data from the database/invalid argument provided when employing link between two web services datasources

    Post Author: vpost
    CA Forum: Data Connectivity and SQL
    I am trying to join information from two related web services within CR XI. I have successfully set up the web services as data sources have been able to get to the point where I get good data back. However, when I try to pull in certain fields, I get an error that says "Failed to retrieve data from the database/invalid argument provided". Here's the scenario:
    The web services are structured as follows:Web Service 1 (Artist) has attributes of Artist Name and Date of Birth.Web Service 2 (CD) has attributes of CD Title and Release Date. Underneath each CD are songs, each of which have a Song Title and Artist Name.
    I have defined both web services and defined a link between Artist.Artist Name and CD/Song.Artist Name. I am able to run a report with Song Title and Date of Birth that crosses web services. I am able to run another report with Song Title and CD Title that crosses the different levels in the second web service. However, if I add CD Title to the first report or Date of Birth to the second (both of which effectively force CR to employ the link between the two web services AND the CD/Song hierarchical structure in the second web service, I get the aforementioned error.
    Any assistance understanding how multiple web services can be linked in this manner would be greatly appreciated.
    Thanks in advance.

    Post Author: Mike Wright
    CA Forum: Data Connectivity and SQL
    Not sure about your exact situation, but having similar problem with another application and have tracked down to security. Added user to group Domain Admin and it works fine. It appears to be accessing a subdirectory which it does not have permission to use and then times out and returns the "invalid....". Seems that once the query just over a certain size (and I'm not sure what triggers this) it needs to make use of temparory file disk, intead of ram.
    I'm still trying to track down which temporary it's trying to uses - so if you have any ques.
    cheers

  • People-Centric and Facebook contact link on e72

    Hi ,
    Is People-Centric home screen and Facebook contact link on e72?
    I like those features on the e5 but I prefere the e72 quality! I dont know wich one I will chose!
    Heeelp please!

    So no one can or want answer this question?

  • Link between Cost element GL Account and WBS element.

    Hi,
    I want to get the List of all dollars sitting on the GL account  attached to the selected WBS element.
    For this, Any one please suggest me the table where i can get the link between the WBS element and GL account.
    or
    Table for link between the Cost element and GL account
    and Table for link between the Cost element and WBS element.
    Thanks,
    Suresh.

    Hi,
    1. There is no link between cost element and WBS
    2. Link between cost element and G/L account is one-to-one. This means, that if it's a primary cost element it has the same code as the G/L account. If it's a secondary element, no link exists.
    3. The table where you can see the postings on your WBS is COEP. There you will find the cost element, WBS, amounts, etc.
    Regards,
    Eli

  • My White Macbook is stuck at the loading screen, and disk utility, safe mode doesn't work either. What should I do?

    I went on vacation a few days ago and in El Salvador, they have this mobile broadband sticks. Well, I was using one until it gave me a network error. After that, it shut down my computer entirely. The first time it happened, I didn't think much of it. I took the battery out and put it back in for it could work. It happened another two times, and after the third time, my MacBook stays stuck at the loading screen, and it will take 5-10 minutes on that screen, before it shuts down, or it wouldn't turn on at all. I've tried booting into safe mode, but it appears to not boot into it. I've tried resetting the Pram, and using disk utility, but that still won't work. I don't know what else to do to make it boot into  OS X  Lion.
    I'm an AP student, and the majority of my work is in that computer, and it is very important! What can I do? Not only that, but I enter school in a few weeks and I need the AP work by the time I enter.
    What can I do? Can someone help?
    Thanks

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login. What should I do?

    I was having some problems with my mac, safari and itunes was freezing alot. I have to force shutdown and when I tried to start up again i get to the login page, type in my password and it starts to load, but then the screen turns blue for a few seconds and it goes back to the log in screen. What should I do?
    Please Help!!

    Somewhat similar problem:
    Put in the password, hit enter, the screen goes blue for half a second, then goes back to login screen and carries on logging in as usual.  Drives me mad.  It doesn't happen with a fresh Lion installation, nor if booted into safe mode.  On the machine in question it also happens to new user accounts.
    I've removed all login items, including Startup Items and Launch Demons (pun intended) and Agents, I've compared system login plists with a fresh Lion installation - can't see differences.  I've removed Little Snitch and PeerGuardian (no more third party kexts).
    @Carolyn: I've done disk maintenance with DiskUtility and fsck and even DiskWarrior, cleaned caches, etc. etc.
    Any ideas would be gratefully received.
    Sorry for trying to hijack the thread (as it's not about Lion), but it seemed dead anyway.

  • When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.

    When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
    Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?

    Thank you for your help.
    I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
    In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
    Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
    Hope this helps others that it just might be your hard drive failing.

  • I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

    I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My Macbook wont turn on, it gets pasted the White Apple screen then goes to a Blue screen that quickly turns a slightly darker shade of blue with the familiar loading icon then back again and does this over and over. What should I do? please help!

    So today my iPhone decides to go into recovery mode on me randomly so I  plugged it into my Macbook right away, but it wasn't showing up in iTunes so I did a quick internet search as to why that could be. On the Mac support forum I found instructions stating I should make sure I had the current verison of iTunes on my computer, turns out I had been putting off an Update because I didn't like waiting for it to restart n so forth. So I clicked my boucning update friend at the bottom of my screen and it started checking for updates, the bar got maybe a quarter of the way up and then stopped moving all together, I thought something was wrong so I clicked cancel and tried again. The same thing happened so I clicked cancel and went back to the Internet to find more help on my problems. I found yet another forum saying this solution was simple, restart the computer. So i clicked my little apple at the top and pressed restart and that has been the last thing I got to do on my computer because when it restarted it got past the White Apple logo screen and went on to a Blue screen which quickly turned a darker shade and had the loading circle, then back to the previous blue screen, then right back to the darker one. This process it repeated several times and I can't for the life of me figure out what to do. Please someone have a simple answer to this that I haven't Already tried, I have already tried safe mode and it just doesn't work for me. Please please help I need my computer for class it has all my notes and a paper I was doing, not to mention my iphone is still in recovery mode, even when I can get to another computer to fix that I need all the back up files off of my macbook to restore it to what I know it as and not default.

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

Maybe you are looking for