Loading a Plugin before MediaFactoryItem is added

Hello,
When I try to load my plugin before a MediaFactoryItem is added to the MediaFactory, it won't work (the plugin doesn't load). However, when load a plugin after there is at least one item in the MediaFactory, the plugin works fine. Is this an intentional feature?

Looks like this actually wasn't the issue. I've discovered that my plugin will always fail if I'm trying to load it dynamically, for example:
var resource:URLResource = new URLResource("http://localhost/streamlighter/client_tests/players/as3-v1.4.0/OSMFPlayer/OSMFPlugin.swf");
factory.loadPlugin(resource);
Always results in a plugin load error event being fired.
I've tested the exact same thing as a static plugin instead and it always works perfectly:
var resource:PluginInfoResource = new PluginInfoResource(new OSMFPlugin().pluginInfo);
factory.loadPlugin(resource);

Similar Messages

[svn:osmf:] 10587: Modified the Akamai Plugin Sample app: 1) Added the new MAST plugin; 2) Added support to load the plugins as static or dynamic

Revision: 10587
Author:   [email protected]
Date:     2009-09-24 18:42:35 -0700 (Thu, 24 Sep 2009)
Log Message:
Modified the Akamai Plugin Sample app: 1) Added the new MAST plugin; 2) Added support to load the plugins as static or dynamic
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.actionScriptProperties
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.project
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.css
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml

Revision: 10587
Author:   [email protected]
Date:     2009-09-24 18:42:35 -0700 (Thu, 24 Sep 2009)
Log Message:
Modified the Akamai Plugin Sample app: 1) Added the new MAST plugin; 2) Added support to load the plugins as static or dynamic
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.actionScriptProperties
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.project
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.css
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml

How to Enable Plugin before File Opened And Load PDF File From memory?

hello everyone,
there have two problems,all i want to do is to show a pdf file encrypted by AES algorithm.
1.one is how to enable plugin before file opened?
i developed another two plugin,and each enabled after one pdf file was opened,and now i want to replace the file open command and can do some word by meself,such as decrypt the pdf ?
2.another is how to load pdf file from memory?
if i can enable plugin before file opened,and than i can read the file and decrypt it,and now i want to do is do load the decrypt file (in memory) into the adobe?
i tried many method,but all in vain.who can help me or give me some advice?
thanks.
merry chrismas to everyone.

The proper way to handle other file formats (even where it is really a PDF that has been "wrapped") is to create an AVConversionHandler.
To load a PDF from a source other than the file system, you need to create a custom AVFileSys.

Teamspeak3-server: unable to load database plugin library

After applying the latest package version, I get: "unable to load database plugin library "libts3db_mariadb.so".
It used to run perfectly fine before. libts3db_mariadb.so is present at /usr/lib/
I am stuck and don't know what to check next. Please advise.

It seems the same conclusion is discussed on the AUR already; did you read that?
https://aur.archlinux.org/packages/teamspeak3-server/

How to load a plugin from another plugin?

Hi,
I'm trying to load a plugin, which is not located in the plugin-paths of After Effects from another plugin. It seems to load the aex(dll) and execute the main function fine, but afterwards it crashes immediately and I have no idea why.
This is how my pluginLoader-PlugIn looks like:
1. I created a commandHook to be able to trigger the pluginLoad from the Edit Menu
2. for the actual load of the dll I use the following commands:
          AEGP_SuiteHandler    suites(basic_suite);
        std::string dllName = "C:/PATH/TO/plugin.aex";
        // defining type and order of the arguments of the entry function
        typedef A_Err (*args_type)(SPBasicSuite *pica_basicP, A_long major_versionL, A_long minor_versionL, A_long aegp_plugin_id, AEGP_GlobalRefcon *global_refconP);
        args_type pluginEntryMethod = NULL;
        // loading the dll(aex) and the entry function
        # ifdef _WIN32
        HMODULE hDLL = LoadLibrary(dllName.c_str());
        if (hDLL != NULL)
            pluginEntryMethod = (args_type) GetProcAddress(hDLL, "EntryPointFunc");
        else
            return err;
        # else
        void *pLib = ::dlopen(szMyLib, RTLD_LAZY);
        if (pLib != NULL) {
            pluginEntryMethod = (args_type)::dlsym(pLib, "EntryPointFunc");
        else
            return err;
        # endif
        if (pluginEntryMethod != NULL)
            // hardcoding the plugin version
            A_long mavL = 0L;
            A_long mivL = 1L;
            AEGP_PluginID plId;
            // to get a valid plugin-id I use this command
            suites.UtilitySuite3()->AEGP_RegisterWithAEGP(*globalRefcon, "nameOfPlugin", &plId);
            // I create copy of the refcon and the suite
            AEGP_GlobalRefcon newRefcon(*globalRefcon);
            SPBasicSuite newSuite(*basic_suite);
            pluginEntryMethod(&newSuite, mavL, mivL, plId, &newRefcon);
        # ifdef _WIN32
            FreeLibrary(hDLL);
        # else
            dlclose(pLib);
        # endif
If I run After Effects with the debugger, the EntryFunction of the new plugin runs through without errors. But Then it crashes and stops at random positions: sometimes in the IdleHook of the newly loaded Plugin, sometimes in the MenuHook.
Does anyone have an idea, what I am doing wrong?
btw: when I copy the second plugin in the default Afx-Plugin-Folder it loads fine and seems to work correct.
Thanks for your help!
Martin

Okay, unfortunately it had nothing to do with static or dynamic linking of the dependencies.
I was able to boil it down to the following problem but I'm still stuck on how to solve the situation:
The problem has to do with an invalid AEGP_GlobalRefcon of the Plugin I load:
the plugin loader:
// the load of the inner plugin..
AEGP_GlobalRefcon newRefcon; // generating a new refcon
suites.UtilitySuite5()->AEGP_RegisterWithAEGP(newRefcon, pluginName.c_str(), &plId); // gathering a plugin id
pluginEntryMethod(basic_suite, mavL, mivL, plId, &newRefcon) // calling the entry function
the loaded plugin:
A_Err EntryPointFunc(
    struct SPBasicSuite        *pica_basicP,
    A_long                     major_versionL,
    A_long                    minor_versionL,
    AEGP_PluginID            aegp_plugin_id,
    AEGP_GlobalRefcon        *global_refconP)
    *global_refconP = (AEGP_GlobalRefcon) new CustomClass(pica_basicP, aegp_plugin_id); // this is where the refcon gets invalid
    return err;
To gather a valid plugin id, I register the plugin and assign a new AEGP_GlobalRefcon to it, which is for instance at address 0x0001234abcd (plugin-loader line 3)
then I call the entry function(plugin-loader line 4) and the entry function creates a custom class and stores a pointer to its instance in the global_refconP pointer, which changes the address from 0x0001234abcd to 0x0a010b020c3d4.
The crash happens later, when a hook (eg IdleHook) is called, which tries to reinterpret the refconPV-pointer of the plugin (address 0x0001234abcd) to a CustomClass-instance, because the actual instance is stored at 0x0a010b020c3d4.
I reckon, that I can fix this if I either can change the global refcon of the plugin after the enty function has run or if I can get a valid plugin id before calling the entry function and doing the registration with the new refcon I got returned by the entry function of the loaded plugin.
Does anyone know how to achieve one of these two goals?

[svn:osmf:] 11414: Modified Akamai plugin sample app to load MAST plugin from Akamai network.

Revision: 11414
Author:   [email protected]
Date:     2009-11-03 12:31:51 -0800 (Tue, 03 Nov 2009)
Log Message:
Modified Akamai plugin sample app to load MAST plugin from Akamai network. Also added missing readme.txt for the sample app.
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.project
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml
    osmf/trunk/plugins/MASTPluginIntegrationTest/.project
Added Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/readme.txt

Revision: 11414
Author:   [email protected]
Date:     2009-11-03 12:31:51 -0800 (Tue, 03 Nov 2009)
Log Message:
Modified Akamai plugin sample app to load MAST plugin from Akamai network. Also added missing readme.txt for the sample app.
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/.project
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/src/AkamaiPluginSample.mxml
    osmf/trunk/plugins/MASTPluginIntegrationTest/.project
Added Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/readme.txt

How to load kernel module before another kernel module?

I have an Iomega ZIP 100 parallel port drive and need module imm to be loaded before lp module. But I don't know how to do this. Simple adding these modules in rc.conf in MODULES section in the correct order doesn't work. I also realized that udev loads lp module, but I don't know how to make udev load this module before or after other modules.
Last edited by kotyz (2007-06-24 13:58:15)

or in /etc/mkinitcpio.conf :
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
and make a new initrd image with mkinitcpio -g /boot/newkernel26.img ,edit menu.lst and reboot

Don't wanna load audio plugin in FCP

I don't wanna load audio plugin in FCP 5 (audio plugin from Protools and Logic that sharing plugin)
Who know how to unload that third party audio plugin ?
Thank you for every answer.

Version is FCP-X 10.1 with OSX 10.7.2
I use the Ctl-Shift-S to detach the audio from the video, then I can create a single audio-only storyline for the whole project (grouping and using Cmd-G) and add transitions etc to it. It is sometimes difficult to get it to work because the usual "snap" function which works well for video doesn't always work accurately enough for audio (much shorter "frames") so you sometimes get a few samples overlap, a few samples gap between clips or a few samples of a spurious audio clip between clips which are invisible except at sample zoom - and the transition complains of "not enough media". I have had to learn various tricks to get this sorted out!
However, before I go any further - I have found the problem. If I replace the clips in the audio storyline from the original media then the transition works properly. It's something to do with what I was doing to the clips before I broke them apart.
Before I learnt this "separate audio storyline" procedure I was detaching every other audio clip, creating overlaps and using the fade handles. The projects where I used this technique originally, then converted to the "audio-only" storyline are the ones having the trouble. If I start from the raw audio/video storyline, detach the audio and make the separate "audio-only" storyline directly then the transitions work perfectly as they should. If I have previously fiddled with the fade handles, overlaps etc then some of the transitions don't work in the new storyline!

I had the Siri app before it was added to all iphones and when Apple added it mine quit working. I deleted mine from my phone but do not see how to get it back. any suggestions?

I had the Siri app before it was added to all iphones and when Apple added it mine quit working. I deleted mine from my phone but do not see how to get it back. any suggestions?

bjorth wrote:
apparently I have just an iphone 4 not 4s, so thank you.
It does seem rather odd that an app that was acquired thru itunes would quit working once it was incorporated into the device for all users. oh well it was probably free or $.99 when I downloaded it.
I would think that they were just testing it to see how many people would use it. But you might want to write a polite letter to Apple requesting a credit for the purchase price of the no longer supported app. That seems to be the least they could for one of their 'alpha testers'.

Anyone else seen this while loading a plugin: "Error #2044: Unhandled IOErrorEvent:"

Hello All,
I'm curious if anyone else has seen this error while loading an OSMF plugin dynamically:
"Error #2044: Unhandled IOErrorEvent:. text=Error #2124: Loaded file is an unknown type."
You will only see this with the debug version of the Flash Player. The plugin loads fine, but the RTE appears. I've submitted a bug for this (http://bugs.adobe.com/jira/browse/FM-1104) but apparently no one at Adobe can reproduce it while everyone on our team can easily reproduce it at will. Some use Windows, some use Macs.
I've written a very simple player and a very simple plugin, you can simply refresh your browser to try to reproduce the error. You won't see anything on the page, just hit refresh a few times until you see it. You'll need the debug version of the Flash Player to see the RTE. One guy on our team (uses Windows) claims he sees it after he clears his browser cache. I can make it happen on Safari for Mac by simply hitting Cmd-R a few times.
http://mediapm.edgesuite.net/chuck/osmf-test/OSMFPluginErrorTest.html
I also see this on cnn.com. I've attached a screen shot.
Go to cnn.com and watch any video. I get the RTE every time on the first try. We are seeing this repeatedly on OSMF built players that load OSMF plugins dynamically.
Reply if you see the error. This will greatly help in determining that I've not completely lost my mind
In the mean time, I'll be working locally on a work around and hopefully submit that to the OSMF trunk.
Thanks,
- charles

Hi Charles,
Re: CNN.com > Yes I am seeing the error (with each video twice in fact, 1st on start of preroll, 2nd on start of main video)
Re: http://mediapm.edgesuite.net/chuck/osmf-test/OSMFPluginErrorTest.html
This link is not loading.
Both cases using both:
Windows XP > IE 6.0.2900 > Flash Player 10,1,85,3 installed
Windows XP > Firefox 2.0.0.18 > Flash Player 10,1,85,3 installed
hth,
g

Im failing to load the bootmgr before windows 7 installation.

Like the title says, I'm failing to load the bootmgr before the windows 7 installation. I get through the process of boot camping and then when it restarts it goes to a black screen and says something like bla bla bla failed to load boot mgr. I've been trying to get this to work for weeeeeeeks its ridiculous, this whole entire process is ridiculously stupid and shouldnt be this hard. Also people keep talking about reformatting something into NTFS or something and I dont know what any of that means -.- sooo yeah im sorry im stupid, but I would appreciate the help. Thank you in advance <3

Do you have a retail Windows DVD inserted into the optical drive?
If you don't know anything about Windows, what NTFS is or how to format a bootable Windows drive, then you should take the computer to an Apple retailer and arrange for a genius to help you out. Virtually, the entire process is outlined in the documentation you printed out, so I question how well you've read it.
You might check out iMac bootmgr is missing.
Boot Camp- Frequently asked questions about installing Windows 7
Apple Support - Boot Camp
Boot Camp - Installation & Setup Guide (OS X Lion)
Boot Camp- Start up to black screen after installing Windows

Every time I start up Firefox, it checks for plugin updates. All my plugins are up to date, but it continues to load the plugin site. How do I make it stop?

Starting on Fri. 6/10/11, every time I start up Firefox 3.6.17, it loads the plugin update site. Initially, it said my Adobe reader plugin was out of date. Therefore I updated that plugin, yet that did not fix the problem. So I was finally forced to disable the plugin. After doing this, the plugin updates check still runs every time I start FF. However, they all come back up to date.
So my question is how do you make this plugin update check stop running. I had made no changes to firefox prior to this.

There's a fault with the blocklist.xml file which was updated on Friday, it should be fixed on Monday and you should get the updated file on Monday or Tuesday.

Getting error on imac at time of loading photoshop plugin - "One or more plugins currently not available on you system"

Hi,
I am getting below error message while loading photoshop plugin on intel mac os 10.5.7 in photoshop CS3.
"One or more plugins are currently not available on you system. For details, see Help -> System info"
In System info it is giving error as
"Plug-ins that failed to load:
Dissolve NO VERSION - - from the file “/Applications/Adobe CS3/Adobe Photoshop CS3/Plug-Ins/Filters/Dissolve.plugin/”
I have build this code with Xcode v3.0 & selected settings build configuration as "i386".
Is there any CS3 SDK updated need for intel mac or any build settings need to be done in xcode?
Same plugin is working well on emac, but giving above mentioned error on intel mac.
Please let me know if anyone have any idea about this.
Thanks in advance.

Thanks a lot for you suggetion.
2009/5/22 Ramón G Castañeda <[email protected]>
If you had been running CS3 on a PPC machine (PowerPC or pre-Intel box)
it's likely the plug-in was not written for Universal Binary.
>
Now that you have an Intel iMac, any plug-ins that have not been updated
for Universal Binary will not run, because your CS3 is now running natively
in Universal Binary.
>
In order to run your older plug-ins, you would have to run CS3 in Rosetta
emulation software—with a corresponding, MASSIVE performance hit..
Rosetta emulates the PPC chip. To set up CS3 to run in Rosetta, you
highlight the application icon in the Finder a do a Get Info on it (Command
I). check the Run in Rosetta box, close the dialog box, launch CS3 and
watch it crawl along.
>

I downloaded PS CC 2014 and I don't know how to find and load my plugins, OnOne and Nik

Where do I find and load my plugins?

You will need to reinstall these. It may be necessary to get new versions and/or pay for an upgrade to get versions that are compatible with PSCC 2014. I can use the Nik Collection in 2014 but would have to pay to upgrade OnOne and chose not to. You may have different versions, so don't assume this is applicable to you.

My question is to anyone that can help..I downloaded 2-300 photos on my iPad and want to reload a few hundred more. The last time I did this I lost the first batch of photos I loaded a week before. How do I just add without losing what is already on iPad?

My question is to anyone that can help..I downloaded 2-300 photos on my iPad and want to reload a few hundred more. The last time I did this I lost the first batch of photos I loaded a week before. How do I just add without losing what is already on iPad?

You need to add the new photos to the ones that are currently on the iPad and (re-)sync them all - only the most recent photo sync remains on the iPad, not including photos in a subsequent sync is how you delete them from the iPad (as you've found out).
You can use third-party apps such as Simple Transfer which can copy photos to the Photos app via your wifi network, but they will only go into the Saved Photos/Camera Roll album, and not into a 'proper' album.

Loading a Plugin before MediaFactoryItem is added

Similar Messages

Maybe you are looking for