Loading a text file from a relative location in shockwave

Hi all
I'm REALLY sorry I have to post about such an inane problem.
I've googled this and looked in forums and found several
suggestions but none of them are working for me. I want to load a
text file from the same directory as my movie. I can get this
working in authoring mode, in a projector, and in a shockwave movie
on the local machine (using getNetText("/text.txt")).
But when i put the shockwave movie on a server, it does NOT
work. The macromedia documentation says that getNetText works with
relative URLs. But when I put in the full URL, it does work, so
obviously the shockwave movie is having a problem finding the text
file which IS in the same directory as it.
Any suggestions / ideas? All i want to do is access a text
file :)
Sorry again for such a lame problem
Mike

thanks - this worked. I also had to not use a repeat loop to
wait for netDone() to return true.
Thanks again
MIke

Similar Messages

  • Problems loading a text-file from a shared NT network order

    Hi @ all,
    I try to upload a text file in MII that is destinated in a shared order in the NT file network.
    I used text_loader with URL FILE://SERVERNAME/SHARE/input.txt and I get the error message "connection refused" even if I use credentials with an authorised user.
    Do you have any idea why it does not work?
    Thanks in advance!
    Sebastian

    Hi,
    For this you need to use FTP Input Action. Put all the files(you want to upload to MII) are in shared network into your FTP server.
    Then use the FTP related actions in transaction. This is the best way.
    Also see the similar [Thread|Re: Saving a file to an external system from MII server] and [Help|http://help.sap.com/saphelp_mii121/helpdata/en/44/710ca09ea03abee10000000a155369/content.htm]
    Hope this helps you.
    -Suresh

  • Load & retrieve text files from lob column

    Dear All,
    I have created a table with CLOB column in it.
    Now I have to inset text files into that column and retrieve the file/ file contents from that column through stored proc.
    Can u please tell me how can i do that??
    Thank you,
    Gautam

    Examine two packages, Dbms_Lob and Utl_File. You are building your file from clob 'piece-by-piece' until you reach the end of clob.
    Pseudo
    - open file for writing (utl_file)
    - get the length of clob
    - get first part of clob (dbms_lob.substr)
    - apend part of clob (from previous) to the file
    - while not end of clob repeat previous two steps

  • Loading multiple text files from a folder into oracle clob field

    I would like to load about 300 word documents into a oracle clob field with each document inserted as a separate record.
    I'm not quite sure how to go about doing this. Is there a utility in oracle that would do this?
    I've looked at sql loader and utl_file but both require the name of the file. Is there a way I can do this?
    If its not possible using just oracle, does anyone know how I can do this in combination with perl?
    Many Thanks
    Sam

    I have no experience with this, but pl see if MOS Doc 73787.1 (How to Read A Binary File into BLOB Using PL/SQL) can help.
    Essentially, you will have to write code to loop thru all 300 files to load them into the database
    HTH
    Srini

  • Loading an xml file from an xml file

    I'm trying to load an xml file from an xml file, but I'm
    having problems. My first xml file is really simple - it only
    contains one attribute with the name of another xml file in it
    (eventually I will have multiple xml files in here and run a loop
    on them...this is why I want to load an xml file from an xml file).
    Currently, with the code below, I can get the main xml file
    to load ("main.xml"), but I cannot get the secondary xml files to
    load FROM the main.xml.
    I want to then take childNode values from the secondary xml
    file and use them within my .swf in text boxes and whatnot.
    Any guidance? I think I'm going wrong on the line where I'm
    saying "i.newxml.load(i.attributes.location);"
    - How can I get this to work?

    johnypeter:
    I tried changing the code inside the loop to use just
    "newxml" instead of "i.newxml", and I declared with "var newxml =
    new XML();" - was this what you were thinking?
    kglad:
    The reason I tried to use the loadXML() function in the loop
    was so that for each node in my "main.xml" it would load the new
    xml file listed - this is a no-no? Do you have any ideas as to what
    I could do?
    For the for-loop, what should I change in it? I'm not great
    with loops so I tried to modify some code from another loop I found
    in another forum thread - not the right way to do it here?
    Also, what should I trace? The value of the _root.address, or
    i.attributes.location? I have created dynamic text boxes on my
    stage to see if the correct value from the xml file loads (ie. the
    name of the xml file within the xml file) and it does, but now I
    don't know how to put that information into ANOTHER loadXML()
    function and get the node information from it - does that make
    sense???
    Below are the examples of the xml files I am using. In the
    first one, main.xml, I will have a list of multiple xml files, each
    with the same nodes and elements as in the details.xml file
    (different values, of course).
    This is just to give you an example of what I'm trying to
    accomplish - pulling ALL the addresses and phone numbers from
    multiple xml files. I cannot manually collect this information, as
    it is dynamic, and will be updated in each individual details.xml.
    I was hoping to collect the information by simply adding to and
    updating ONE xml file - main.xml.
    Do you think this can be done? Am I going about it the wrong
    way? I'm quite limited in AS knowledge, which is why I'm piecing
    together code from other posts!

  • How to load a text file?

    I'm trying to load a text file and I've run into a wall. So
    far, I've loaded swf files, image files and XML files without
    problems. But the text files just don't seem to load.
    It's not a tough situation. The files are in the same
    directory as the application. When I run it, I see no sign that the
    file has loaded, but haven't found the error trapping to tell me
    what is (not) going on.
    The code below was culled from examples on the web, they seem
    fairly consistent, and they are copied pretty much exactly. and I
    put them both into a single action to test them.
    Any clues as to what is not happening? I need to read an old
    txt data file that was used with AS2, with pairs of names and
    variables. The first example just reads a couple of variables. The
    second just reads some random text. I'm just trying to see what
    works here, so I can incorporate working code into the real
    program.
    Thanks for your help.

    Thanks Joergen,
    I put in the changes you suggested and still no sign that the
    files are even being opened., but it's very good to have the
    feedback. Just the fact that someone is getting them to run gives
    me confidence in the basic code. I'll hack on it more and let you
    know what the answer turns out to be for me.
    Thanks.

  • How to load a text file int JEditorPane and highlight some words (Urgent !)

    I want to load a text file into a JEditorPane and then highlights some keywords such as while,if and else.I am using an EditorKit in order to style the JEditorPane. I have no difficulty while giving the input through the keyboard but lots of exceptions are thrown if i try to load the string from a file.

    Hi,
    I think the setCharacterAttributes(int offset, int length, AttributeSet s, boolean replace) will solve the problem.
    You can create your own Styled Document and set it to the Editor Pane.

  • "how to load a text file to oracle table"

    hi to all
    can anybody help me "how to load a text file to oracle table", this is first time i am doing, plz give me steps.
    Regards
    MKhaleel

    Usage: SQLLOAD keyword=value [,keyword=value,...]
    Valid Keywords:
    userid -- ORACLE username/password
    control -- Control file name
    log -- Log file name
    bad -- Bad file name
    data -- Data file name
    discard -- Discard file name
    discardmax -- Number of discards to allow (Default all)
    skip -- Number of logical records to skip (Default 0)
    load -- Number of logical records to load (Default all)
    errors -- Number of errors to allow (Default 50)
    rows -- Number of rows in conventional path bind array or between direct path data saves (Default: Conventional path 64, Direct path all)
    bindsize -- Size of conventional path bind array in bytes (Default 256000)
    silent -- Suppress messages during run (header, feedback, errors, discards, partitions)
    direct -- use direct path (Default FALSE)
    parfile -- parameter file: name of file that contains parameter specifications
    parallel -- do parallel load (Default FALSE)
    file -- File to allocate extents from
    skip_unusable_indexes -- disallow/allow unusable indexes or index partitions (Default FALSE)
    skip_index_maintenance -- do not maintain indexes, mark affected indexes as unusable (Default FALSE)
    commit_discontinued -- commit loaded rows when load is discontinued (Default FALSE)
    readsize -- Size of Read buffer (Default 1048576)
    external_table -- use external table for load; NOT_USED, GENERATE_ONLY, EXECUTE
    (Default NOT_USED)
    columnarrayrows -- Number of rows for direct path column array (Default 5000)
    streamsize -- Size of direct path stream buffer in bytes (Default 256000)
    multithreading -- use multithreading in direct path
    resumable -- enable or disable resumable for current session (Default FALSE)
    resumable_name -- text string to help identify resumable statement
    resumable_timeout -- wait time (in seconds) for RESUMABLE (Default 7200)
    PLEASE NOTE: Command-line parameters may be specified either by position or by keywords. An example of the former case is 'sqlldr scott/tiger foo'; an example of the latter is 'sqlldr control=foo userid=scott/tiger'. One may specify parameters by position before but not after parameters specified by keywords. For example, 'sqlldr scott/tiger control=foo logfile=log' is allowed, but 'sqlldr scott/tiger control=foo log' is not, even though the position of the parameter 'log' is correct.
    SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\PFS2004.CTL LOG=D:\PFS2004.LOG BAD=D:\PFS2004.BAD DATA=D:\PFS2004.CSV
    SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\CLAB2004.CTL LOG=D:\CLAB2004.LOG BAD=D:\CLAB2004.BAD DATA=D:\CLAB2004.CSV
    SQLLDR USERID=GROWSTAR/[email protected] CONTROL=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.CTL LOG=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.LOG BAD=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.BAD DATA=D:\GROW\DEACTIVATESTAFF\DEACTIVATESTAFF.CSV

  • How can I read text files from LAN if I only know the hostname?

    I'm new in Java Developing, and dont know the written classes yet. I need help, how to do the following steps?
    <p>1. How can I read text files from LAN if I only know the hostname, or IP address?
    <p>2. How to read lines from text files without read all lines from the beginning of file, just seek to a position.
    (ex. how can I read the 120th line?)
    <p>Please help!
    <p>sorry for the bad english

    I'm new in Java Developing, and dont know the written classes yet. I need help, how to do the following steps?
    1. How can I read text files from LAN if I only know the hostname, or IP address?You need to know the URL of the file. You need to know the hostname, port, protocl and relative path.
    The hostname is server, not file.
    2. How to read lines from text files without read all lines from the beginning of file, just seek to a position.Use the seek() to get to a random byte.
    (ex. how can I read the 120th line?)The only way to find the 120th line is to read the first 120 lines. You can use other file formats to find the 120th line without reading the whole file but to need to be able to detremine where the 120th line is

  • Uploading a text file from webi filter area as part of the query condition

    Post Author: balasura
    CA Forum: Publishing
    Requirement : Uploading a text file from webi filter area as part of the query condition Hi, I am in a serious requirement which I am not sure available in BO XI. Can some one help me plz. I am using BO XI R2, webi I am generating a ad-hoc report, when I want to give a filter condition for a report, the condition should be uploaded from a .txt file. In the current scenario we have LOV, but LOV could hold only a small number of value, my requirement is just like a lov but the list of values will be available in a text file ( which could number to 2000 or 2500 rows). I would like to upload this 2500 values in the form of a flat text file to make a query and genrate report. Is it possible in BO XI? For Eg:- Select * from Shipment Where u201CShipment id = u2018SC4539u2019 or Shipment id = u2018SC4598u2019u201D The u201Cwhereu201D condition (filter) which has shipment id will be available in a text file and it needs to be loaded in the form of .txt file so that it will be part of the filter condition. Content of a .txt file could be this shipment.txt =============== SC4539 sc2034 SC2343 SC3892 . . . . etc upto 2500 shipment Ids I will be very glad if some could provide me a solution. Thanks in advance. - Bala

    Hi Ron,
       This User does not have the access to Tcode ST01.
       The user executed Tcode SU53 immediately following the authorization failure to see the authorization objects. The 'Authorization obj' is blank and under the Description it has 'The last Authorization check was successful' with green tick mark.
      Any further suggestions, PLEASE.
    Thanks.

  • LabVIEW Compare Tool load time of files from repository

    I have the LabVIEW compare tool setup for differences for .ctl and .vi files in Surround SCM source code control system.  The source code control system runs on a networked server.  My PC is on the same network as the server.
    When the LabVIEW compare tool reads VIs that are from a source control repository for diffing against files on my computer, it seems to load the repository files from a temporary folder located in users\username\appdata.  It takes a long time to load VIs that have lots of subVIs because as the tool searches for each subVI the tool begins its search in the vi.lib and instr.lib folders before finding the subVI in the temporary folder.  It is taking a few seconds and sometimes as much as 10 seconds to load each subVI.  This takes a lot of time to Diff VIs that have many subVIs.  Is there a way to make the diffing process go quicker?  Or is this something that would need to be fixed in the LabVIEW compare tool?
    Thanks,
    Gary
    Solved!
    Go to Solution.

    That's the normal behavior of the LVCompare.exe, and the folders at which starts looking for subVIs or control files (.ctl) cannot be modified. The available options that can be configured are the following:
    Configuring Source Control with LVCompare.exe
    http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configlvcomp_thirdparty/

  • Reading Files from an FTP location based on Timestamp

    Hi,
    I have a requirement of reading files from an FTP location. The files should be read in the order they were saved in the folder. Can someone tell me how to solve this?
    Thanks,
    Ravi

    Hi Arik,
    Thanks for your reply. I tried doing what u said, but it isn't working. My requirement is to List the files in the folder using FTP adapter and get the file name with the least file stamp from the FTP adapter and pass the FileName dynamically to another FTP adapter which reads the file based on the FileName. When i tested after including the property (for listing the files) you mentioned, it is giving the following error (copied from flow trace):
    <messages>
    <input>
    <Invoke_getFileListFTP_FileListing_InputVariable>
    <part name="Empty" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <empty xmlns="http://xmlns.oracle.com/pcbpel/adapter/ftp/APP_SequentialFileTransfer/PRJ_SequentialFileTransfer/WS_GetFileList_FTP"/>
    </part>
    </Invoke_getFileListFTP_FileListing_InputVariable>
    </input>
    <fault>
    <bpelFault>
    <faultType>0</faultType>
    <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
    <part name="summary">
    <summary>Exception occured when binding was invoked. Exception occured
    during invocation of JCA binding: "JCA Binding execute of
    Reference operation 'FileListing' failed due to: Exception
    occured when binding was invoked. Exception occured during
    invocation of JCA binding: "Could not instantiate
    InteractionSpec
    oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec due
    to: Cannot set JCA WSDL Property. Error while setting JCA
    WSDL Property. Property setListSorter is not defined for
    oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec Please
    verify the spelling of the property. ". The invoked JCA
    adapter raised a resource exception. Please examine the above
    error message carefully to determine a resolution. ". The
    invoked JCA adapter raised a resource exception. Please
    examine the above error message carefully to determine a
    resolution.</summary>
    </part>
    <part name="detail">
    <detail>Cannot set JCA WSDL Property. Error while setting JCA WSDL
    Property. Property setListSorter is not defined for
    oracle.tip.adapter.ftp.outbound.FTPListInteractionSpec Please
    verify the spelling of the property.</detail>
    </part>
    <part name="code">
    <code>null</code>
    </part>
    </bindingFault>
    </bpelFault>
    </fault>
    <faultType>
    <message>0</message>
    </faultType>
    </messages>
    Thanks,
    Ravi
    Edited by: Ravi Santosh on Apr 24, 2012 11:02 PM

  • How to upload a text file from a shared folder and provide an o/p

    how to upload a text file from a shared folder and provide an o/p  containing the details in each order in the text file

    Hi,
    Use <b>GUI_UPLOAD</b> to upload a text file from a shared folder.
    Use <b>GUI_DOWNLOAD</b> to download data in a file on the presentation server or use <b>OPEN DATASET, TRANSFER</b> and <b>CLOSE DATASET</b> statements to download data to the application server.
    Now, I hope the code for data fetching, if required, is already present in the report.
    Reward points if the answer is helpful.
    Regards,
    Mukul

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • Sending EMail "Text-File" from Application Server!

    Hi Experts,
    how can I sending a Text-File from Application Server via Email?
    Is there existing a Function Modul?
    With Kind regards
    Ersin
    Moderator message: sending emails = FAQ, please search before posting.
    Edited by: Thomas Zloch on Nov 25, 2010 4:23 PM

    STF (Search the forum)!  This type of question has been asked...and answered....many times.

Maybe you are looking for