Loading a video/image on entering and exiting a marker

Hi,
i am doing a project with Adobe director. I was wondering if
there is any piece of code I can use if I want to run a flash file,
for example, when I go to a marker. So that I run a flash flash
before the marker loads and similarly run another flash file when I
click on some other marker and exit that specific marker.
I want to run the flash file before the contents of the
marker is displayed and similarly for exiting????
ASAP....thanks in advance

For the start of the new section, you could put the Flash
sprite at the marker,
have it play and then, when it finishes, move to another
frame and show the new
content. If the Flash sprite is integral to the content, then
just have it play
at the frame where the marker is located.
When you want to leave a particular area, have the
navigation button store the
new marker's name in a variable and then play the closing
Flash sprite. When
the Flash finishes have it tell the play head to move to the
marker that is
stored in the variable.

Similar Messages

Profiler API - Locks, Threading.Monitor.Enter and Exit

I'm using the Profiler API in a project in order to track the locks made using Monitor.Enter, Monitor.Exit, and the lock keyword. I planned to do this by outputting using a pipe, the events from the FunctionEnter3WithInfo and FunctionLeave3WithInfo callbacks.
These callbacks are called when methods are entered and exited, and appear to be functioning fine regarding their implementation - they generate a large output of methods that had been entered and left, but I'm not receiving callbacks for the following:
ENTER: Monitor.Exit
LEAVE: Monitor.Enter and Monitor.Exit
Oddly enough, I do get receive a callback for entering Monitor.Enter. Other than these problematic methods, I appear to be getting calls from the Profiler API for everything else.
Is there a known issue regarding these methods not being reported by the API?
Alternatively, if there's a better way of achieving my goal than the way I'm doing it, feel free to point me in the right direction :)
Thanks,
Olu

Thanks for the reply Brian,
I don't get a JITInlining callback for Monitor.Exit (however I do for some Monitor.Enter calls). For FunctionTailcall3WithInfo, I also don't get a callback for Monitor.Exit (but I do for some Monitor.Enter calls).
I'm not getting anything from ExceptionUnwindFunctionEnter, though when manually tested by throwing an exception within a try-catch, I get a callback.
If it helps, I have the following flags set for events:
COR_PRF_MONITOR_ALL
COR_PRF_ENABLE_FUNCTION_ARGS
COR_PRF_ENABLE_FUNCTION_RETVAL
COR_PRF_ENABLE_FRAME_INFO
Additionally, I've tried the following flags to see if it resolves the issue:
COR_PRF_DISABLE_INLINING
COR_PRF_DISABLE_OPTIMIZATIONS
Edit 1: Using COR_PRF_DISABLE_OPTIMIZATIONS now means I get a callback to FunctionLeave3WithInfo when Monitor.Enter leaves, however there is still no sign of Monitor.Exit
Edit 2: As a test, in the small application that I'm profiling, I've wrapped the Monitor.Exit and Monitor.Enter method calls in another class, so I can call them as so:
CCMonitor.Enter(obj) and CCMonitor.Exit(obj).
The profiler reports both the enter and leave of these functions correctly.
Thanks,
Olu

Using addEventListener for Enter and Exit frame

hi , sometimes i want to set some function in specific frame in start and exit this frame
for example i have Flv player in frame 20 , i have background sound ( mp3 player ) so i want when swf goes to this frame my sound goes Off and when Exit from it and go to another frames the sound played again ...
i put these script in frame 20 :
addEventListener(Event.ENTER_FRAME,enterfunc);
function enterfunc(e:Event):void {
    trace("I started");
addEventListener(Event.EXIT_FRAME,exitfunc);
function exitfunc(e:Event):void {
    trace("will Exit");
but after test movie i see I started and will Exit runs Repeatly without stoping !!
Notice : first i put my sndChannel = soundClip.play; and sndChannel = soundClip.stop; but my music runs over and over and finally my system Hanged and need to Restart so i use trace to see
so whats a problem ? thanks for spending time and help me

kglad wrote:
// in frame 1:
function f():void{
trace("function f is executing when the playhead is in frame:", this.currentFrame);
// in frame 2:
f();
This works well For Excute Function on entering Frame Once !! thanks ...
but Only 1 More Question :
as You told me in your No.2 Replay :
I try to add some movieclip with instance name Or FLv playback with instance name and then Try to use this codes :
mymc.addEventListener(Event.ADDED_TO_STAGE, addedF);
function addedF(e:Event):void{
trace("I Start");
mymc.addEventListener(Event.REMOVED_FROM_STAGE, removedF);
function removedF(e:Event):void{
trace("I exit");
why The removedF function Works well and the addedF function not work ?!?   in fact nothing Happend on Enter This Frame but on exit i see my I exit Trace !!

Can Video widgets start and stop when entering and exiting the browser viewport?

I like to use multiple autoplaying/looping video clips on a single page but I need to figure out how to make the videos start only when they enter the viewport on a browser and stop after they exit the viewport. Does anyone know a way to do this?

I do not know if this can have an affect on it but the videos are being downloaded through multiple computers to a private server and being accessed through the mac. Please let me know what you think.

My iPhone is constantly entering and exiting the load-up screen

Hello Apple Support, I'm having troubles with my iPhone 4s ( possible firmware damage ).
Prior to the current problem I had a flat battery.
I went back home to charge my phone which was stuck on the charger for the rough 4 hour minimum quota. After that the phone forced itself into recovery mode ( which seems apparently to have happened to many individuals prior to my error ).
So I've connected it to iTunes and followed through the manual recovery troubleshoot ( as shown by this link https://discussions.apple.com/message/24076492#24076492 ), and it was apparently error 9.
After solving error 9, my phone showed up with error 11 which according to my provided source ( http://theiphonewiki.com/wiki/ITunes_Errors ) says that there is possible firmware damage.
After various attempts to revive my phone ( which I've now been doing for the past 2 hours ), my phone forced itself out of recovery mode, only this time...
The load-up screen seems to be corrupted.
Instead of the initial load-up screen > recovery mode screen ( connect to itunes picture with cable ), it now goes as the
load-up screen ( 3 seconds ) > forced hard reset > back to load-up screen ( 3 seconds ) > forced hard reset again > rinse & repeat.
I am now stuck because it seems possibly the firmware after my various attempts to save it ended up killing it... ( kinda like a cardiac surgeon gone nuts ).
If possible I would like urgent help, thank you very much Apple.
Possible req. info
iPhone 4s Model A1387 8GB
iOs before error : not sure but it should be well past iOS 7.0.2
hardware condition : perfect condition ( no scratches / dents ), screen protectors both front and back.
spare memory : 2.1GB
time of purchase : Mid-January 2014 ( purchased off an optus [AU telecom company] dealer along with a plan )
note : I am not a technology specialist ( should be the complete opposite actually ), just a simple highschooler who requires this for work and training related issues
Thank You for your time.

Update to whoever reads this.
The back and forth load-up failure only occurs when I am connected to the computer.
The phone enters the initial start up that every receives (The greetings along with language select and area), but unfortunately it tells me to connect to itunes which.... ends up with the initial problem we started with.
I've managed to force my phone back into recovery mode with the demand for itunes whilst connected to the computer.
I've tried to restore the phone through itunes but a problem occurs.
Problem : once the extracting of software is complete, my phone resets itself which automatically disconnects itself from the phone causing the process to be restarted over and over again. I cannot get past the software extraction step because of this problem with the phone automatically resetting itself to cancel out this extraction.

Firefox 3.6.10 update won't load on restart (tried many times) and exits after warning to restart again - how to disable warning so don't have to start twice every time I use Firefox?

I regret agreeing to download Firefox 3.6.10 update, as it is somehow corrupted, and will not load when I restart. Subsequently, every time I start Firefox, it warns "Update Ready to Install", then when I don't restart (if I restart, it won't load) it exits, and I have to start Firefox a second time. Then it works without the warning, but when I exit and start Firefox again, the warning returns and the cycle repeats. This is such a nuisance I have gone back (reluctantly) to Explorer. Is there anyway for me to get rid of this corrupted update and go back to before I downloaded the fateful update?

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

Enter and exit a case structure

I'm currently building a control. I have a condition for three booleans to become true to enter a case structure as true. One of the conditions is a temporary increase in temperature. I want to stay in the case structure after the temperature becomes false but both of the other booleans stay true. Is there a way to do this or should I be using some other technique?
Thanks,
Colt

I think this guy is running into the same misconception I and many of my classmates ran into about LabVIEW back in the day. When your code enters the True Case, it will complete the True Case and immediately exit the True Case to complete whatever other tasks that may be outside of the Case Structure (assuming it didn't already do them). Then, the while loop (you must have a while loop) will move on to the next iteration, meaning it will do it all over again.
Now, if you know already know and understand how code works in general (about iterations) then do forgive me. I've edited a lot of student code and have seen this very mistake. A misunderstanding of the fact that code reiterates and will do it all over again if not told to do something else. Typically the mistake is made with Event Structures. I know it doesn't make much sense to not understand that...but trust me, it makes sense to those who don't understand. ha

Video images are garbled and colors are all run together

Just got a new computer and downloaded newest version of quicktime. I can't watch any videos/webcasts etc. The sound is fine and the video plays but the screen is "garbled" and the colors are all off/run together?
I can play a dvd fine
Dont know much about computers and Dell would not help me....any ideas?

I am having a similar problem and tried the same fix and it did not work for me either. In my case the video plays for a few seconds then get choppy but the audio is fine. Someone on this site suggested that my machine does not have enough to play the H.264 codec. I do have an older machine a compaq 1.20 GHz , 512 MB Ram running XP home sp2. It should be able to run a video. After all I am not on a 486 machine. I finally had to back out of the QT 7.1.6 and currently running QT 6.5.2. It works fine for me at least at this point. But of course now that means I cannot look at videos using the latest format.

When user enters and exits one movieclip, button changes color

Hello,
I currently have a slideshow-style navigation site. There are five buttons on the bottom and when the user clicks each button, it triggers a nested movieclip to play. I would like the button to be highlighted when the corresponding movieclip is playing, but when they click another button and another movieclip plays, I want the button to go back to its original color.
The problem is that the movieclips that are playing are nested two levels down and the buttons have to be on the main timeline. I think I might need an event listener to see if a certain nested movieclip is playing, to know to change the button color. It seems to easy but I can't figure it out, thanks for any help!

Hi again! Sorry, I keep changing my mind on whether I've figured this out or not. Now I need the buttons to become disabled when they are highlighted and active. I tried putting a: btns[i].enabled = false; in the else part of the for-else statement and it didn't work. Where would I put that kind of code? Thanks!
stop();
//attach sounds
Sound1 = new Sound();
Sound1.attachSound("Sound1");
Sound2 = new Sound();
Sound2.attachSound("Sound2");
Sound3 = new Sound();
Sound3.attachSound("Sound3");
//buttons
//nav buttons
b1.onRelease = function() {
    gotoAndStop(1);
    stopAllSounds()
    activeBtn(b1);
b2.onRelease = function() {
    gotoAndStop(2);
    stopAllSounds();
    activeBtn(b2);
b3.onRelease = function() {
    gotoAndStop(3);
    stopAllSounds();
    activeBtn(b3);
//array for highlighted button state
var btns:Array = [b1, b2, b3];
function activeBtn(mc:MovieClip):Void{
   for(var i:Number=0; i<btns.length; i++){
      if(btns[i]!=mc){
         btns[i].gotoAndStop("inactive");
      }else{
         btns[i].gotoAndStop("active");

Iphone 6 on iOS 8 is freezing and lagging occasionally esp when entering and exiting the Facebook app?

Am I the only one experience this?
Also the spotlight search results sometimes don't return any web results.
Wifi is extremely slow, forcing me to use my mobile data at home.
Random reboots
Most recently, my phone was accessing apps and clicking on things without my permission. I was had it on the passenger seat in the car and looked over and it was doing it's own thing?
Touchscreen becomes unresponsive occasionally.

Adding to the list of features not working(I don't know how or if I can edit my original post):
- Apple Pay
- Voice to Text (Dictation)
I was trying to use Gmail on Wi-Fi, but kept getting an offline error until I switched to LTE. This could be a Gmail glitch so I am not going to consider it as a Wi-Fi problem until I'm certain since Gmail worked fine on Wi-Fi during all this in the past.
So far, I have tried to restore my device from a backup and reset my network settings but neither have fixed the problems listed.
I have also opted to send Diagnostic & Usage data to Apple in hopes this bug will be fixed in a later update.
I also remembered when I first had to instal iOS 8.3. My Wi-Fi and LTE were not connecting to Apple to verify the software install, so I used a family member's (using the same phone carrier and plan as me) iPhone 6 Plus's hotspot to connect to their LTE to download iOS 8.3 in attempts to fix this.

Why the hell can't the Flash player skip back a video like three seconds without re-loading the video from the server and make you fuɔʞing wait 10 seconds?

So, why?

Hi giuliano,
Like you I have tried all these things above without success. It's interesting the problem started for both of us in the middle of September. Let me know if you find any solutions as we have exactly the same problem.

Ipod nano resets when I click on music, and exit podcasts.

As the subject say's, on my 4GB black, ipod nano when I click on the music tab it resets, bringing up the apple logo and goes back to the main menu. Same thing happens when I exit the podcasts menu, I can listen to a podcast but when I exit podcasts and go back to the main menu it resets bringing up the apple logo again and going back to the main menu. I can do every thing else view Photos go into the Extras tab, Settings and even Shuffle Songs which play fine. I can enter and exit these with no problems. When I plug it in to my computer it's fine even in itunes it's fine I can play anything and do anything. I did a restore of the software already and it fixed nothing, I’m all out of ideas.
Please help thanks.
CoH
4GB ipod nano Windows XP

I think I figured it out. Podcasts are the culprit, if you set up you your iPod nano to automatically update podcasts and it downloads them on to the iPod, it causes an error in the iPods software, causing it to restart when you click on music or leave the podcast menus. So I changed the settings to manually update podcasts. Putting my podcasts manually onto the iPod, they show up in the Podcasts playlist under my iPod nano menu (which shows automatically) in iTunes. This is when the error starts, when I undock my iPod nano and go to music sure-enough it restarts, I plugged it back into my computer and deleted the podcasts, undocked it and it was working fine. I converted the podcasts to AAC and then put them on the iPod. They did not show in the Podcasts playlist, they just show as normal songs, and when I undock it it works fine. Now I know that they don’t have to go into that playlist and that I can create my own smart-playlist. But it should not do something like this. I’ll make a new thread about this problem.
Thank you all for the help.
CoH

Large background video/image

Hey all,
I am currently designing a website and one of the main features I would like is a large background video/image with header and large centred text laid over the top. The link I have provided shows exactly what I want to achieve but I don't know where to start.
The link below is the example:
http://weareadaptable.com/
Thanks for the help.
Alex

You have a link with an example. Do you know how to view source code? Start there!

Load array of images

Looking for a little direction. I'm trying to load array of
images into flash and eventually make the image draggable.
Can anyone point me to a tutorial that can help?
Thanks

Looking for a little direction. I'm trying to load array of
images into flash and eventually make the image draggable.
Can anyone point me to a tutorial that can help?
Thanks

Video images won't load, error message says "problem loading page/server not found

when i select videos to watch, they have symbol in the top left hand corner but blank everywhere else. if i right click on the symbol i get an error message "problem loading page/server not found" but i'm already logged in to the website. this just started happening today after having watched 100's of videos for years on the same sites. i haven't changed any settings that i know of, but i have tried several different troubleshooting tips but nothing helps. i have windows xp. and i use firefox exclusively. what can i do?

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report your results.

Loading a video/image on entering and exiting a marker

Similar Messages

Maybe you are looking for