Loading a Z* custom transparent table using BW ETL tools

Hi,
In BW is it possible to load a Z* custom transparent table(instead of DSO) directly using BW ETL tools?. Thanks.
Thanks.
Raj.

With BI 7.0 a typical tale is DSO[ write protected]...which should solve all your requirements.
You can have a start/end routine to add records to a z-table while processing data stagging [ datasrc>psa>dtp>dso ]..and delete data in target BI-datatarget[ dso]...and still keep data in ur ztable.
Edited by: Gopi Eriki on Aug 13, 2009 5:37 PM

Similar Messages

How to write a procedure to load the data into a table using xml file as input to the procedure?

Hi,
Iam new to the xml,
can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>.
Regards,
vikram.

here is the your XML parse in 11g :
select *
from xmltable('//Entity' passing xmltype
'<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>
') columns
"dcode" varchar2(4000) path '/Entity/dcode',
"ddesc" varchar2(4000) path '/Entity/ddesc',
"reauthflag" varchar2(4000) path '/Entity/reauthflag'
dcode                                                                            ddesc                                                                            reauthflag
0                                                                                (I87)Other disorders of veins - postphlebitic syndrome                           0
0                                                                                (J04)Acute laryngitis and tracheitis                                             0
0                                                                                (J17*)Pneumonia in other diseases - whooping cough                               0
SQL>
Using this parser you can create procedure as
SQL> create or replace procedure myXMLParse(x clob) as
2 begin
3    insert into MyXmlTable
4      select *
5        from xmltable('//Entity' passing xmltype(x) columns "dcode"
6                      varchar2(4000) path '/Entity/dcode',
7                      "ddesc" varchar2(4000) path '/Entity/ddesc',
8                      "reauthflag" varchar2(4000) path '/Entity/reauthflag');
9    commit;
10 end;
11
12 /
Procedure created
SQL>
SQL>
SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
PL/SQL procedure successfully completed
SQL> select * from MYXMLTABLE;
dcode                                                                            ddesc                                                                            reauthflag
0                                                                                (I87)Other disorders of veins - postphlebitic syndrome                           0
0                                                                                (J04)Acute laryngitis and tracheitis                                             0
0                                                                                (J17*)Pneumonia in other diseases - whooping cough                               0
SQL>
SQL>
Ramin Hashimzade

Synchronizing Two Custom Z Tables Using Abap Program

Hi,
    My requirement is Synchronizing two custom z tables using abap program me.
I have vendors in two tables, i have to select the common vendors from first which are existing in second table also.
In first table each vendor can have more than one supplier types in one field only. In second table these supplier types are divided into
different fields.
     My requirement is I have to check supplier types in first table and i have to pass X to corresponding supplier types in second table vendor.
I have to pass X value for each depending in Second table depending upon supplier type in first table.
. How to do it can any one suggest with code.
Thanks in Advance,
Vivek
<subject edited by moderator>
Message was edited by: Manish Kumar

Hi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
     extract the vendor types in to itab Table1New.
     Select the vendor & types from Table2 by using the for all entries option (better performance).
     loop at Table1New
          check in Table2:
               if the unique key is vendor no: check all fields for the vendor type from Table1New
               if the unique key combo is vendor no & type: check by using a read table.
          If not found => add entry to Table2
     endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou

Loading a BLOB to a table, using webutil

Is there somewhere I can see a comprehensive example of loading a BLOB to a table, using webutil. That is where the user browses and selects a picture (or whatever) from the client machine, and then the file is loaded to the database.
Thanks, Wayne

Hello,
<p>You can inspire from this article.</p>
Francois

Archival Method of a custom transparent table

Hi, I have created a custom transparent table and now I want to archive its contents after a certain point of time. Is there any way for this? Please advice.
Thanks, Sagar...

Hi Sagar,
Have a look at demo archive object EXAMPLE.
Create your custom archive object from AOBJ transaction along with the underlying write, delete, reload and read programs.
Hope this helps.
Thanks
Lakshman

Load XML File into temporary tables using sql loader

Hi All,
I have an XML file as below. I need to insert the contents into a temporary staging table using sql loader. Please advice how I need to do that.
For example Portfolios should go into a seperate table, and all the tags inside it should be populated in the columns of the table.
Family should go into a seperate table and all the tags inside it should be populated in the columns of the table.
Similarly offer, Products etc.
- <ABSProductCatalog xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
- <ProductSalesHierachy>
- <Portfolios>
- <Portfolio productCode="P1">
<Attribute name="CatalogProductName" value="Access" />
<Attribute name="Status" value="Active" />
</Portfolio>
- <Portfolio productCode="P2">
<Attribute name="CatalogProductName" value="Data" />
<Attribute name="Status" value="Active" />
</Portfolio>
- <Portfolio productCode="P3">
<Attribute name="CatalogProductName" value="Voice" />
<Attribute name="Status" value="Active" />
</Portfolio>
- <Portfolio productCode="P4">
<Attribute name="CatalogProductName" value="Wireless" />
<Attribute name="Status" value="Active" />
</Portfolio>
</Portfolios>
- <Families>
- <Family productCode="F1">
<Attribute name="CatalogProductName" value="Internet Access Services" />
<Attribute name="Status" value="Active" />
- <ParentHierarchy>
<Item productCode="P1" modelType="Portfolio" />
</ParentHierarchy>
</Family>
- <Family productCode="F2">
<Attribute name="CatalogProductName" value="Local Access Services" />
<Attribute name="Status" value="Active" />
- <ParentHierarchy>
<Item productCode="P2" modelType="Portfolio" />
</ParentHierarchy>
</Family>
</Families>
- <SubFamilies>
- <SubFamily productCode="SF1">
<Attribute name="CatalogProductName" value="Business Internet service" />
<Attribute name="Status" value="Active" />
- <ParentHierarchy>
<Item productCode="F1" modelType="Family" />
</ParentHierarchy>
</SubFamily>
</SubFamilies>
- <ProductRefs>
- <ProductRef productCode="WSP1" modelType="Wireline Sales Product">
<ActiveFlag>Y</ActiveFlag>
- <ProductHierarchy>
<SalesHierarchy family="F1" subFamily="SF1" portfolio="P1" primary="Y" />
<SalesHierarchy family="F2" portfolio="P2" primary="N" />
<FinancialHierarchy quotaBucket="Voice" strategicProdCategory="Local Voice" />
</ProductHierarchy>
</ProductRef>
- <ProductRef productCode="MSP2" modelType="Handset">
<ActiveFlag>Y</ActiveFlag>
- <ProductHierarchy>
<SalesHierarchy portfolio="P4" primary="Y" />
</ProductHierarchy>
</ProductRef>
</ProductRefs>
</ProductSalesHierachy>
- <Offers>
- <Offer productCode="ABN">
<OfferName>ABN</OfferName>
<OfferDescription>ABN Description</OfferDescription>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
</Segments>
<OfferUpdateDate>2009-11-20</OfferUpdateDate>
<ActiveFlag>Y</ActiveFlag>
</Offer>
- <Offer productCode="OneNet">
<OfferName>OneNet</OfferName>
<OfferDescription>OneNet Description</OfferDescription>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
<Segment>PCG2</Segment>
</Segments>
<OfferUpdateDate>2009-11-20</OfferUpdateDate>
<ActiveFlag>Y</ActiveFlag>
</Offer>
</Offers>
- <Products>
- <Product productCode="WSP1" modelType="Wireline Sales Product">
<ProductName>AT&T High Speed Internet</ProductName>
<ProductDescription>High Speed Internet</ProductDescription>
<LegacyCoProdIndicator>SBC</LegacyCoProdIndicator>
<RevenueCBLCode>1234B</RevenueCBLCode>
<VolumeCBLCode>4567A</VolumeCBLCode>
<SAARTServiceIDCode>S1234</SAARTServiceIDCode>
<MarginPercentRequired>Y</MarginPercentRequired>
<PercentIntl>%234</PercentIntl>
<UOM>Each</UOM>
<PriceType>OneTime</PriceType>
<ProductStatus>Active</ProductStatus>
<Compensable>Y</Compensable>
<Jurisdiction>Everywhere</Jurisdiction>
<ActiveFlag>Y</ActiveFlag>
- <Availabilities>
<Availability>SE</Availability>
<Availability>E</Availability>
</Availabilities>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
</Segments>
<VDIndicator>Voice</VDIndicator>
<PSOCCode>PSOC 1</PSOCCode>
<USBilled>Y</USBilled>
<MOWBilled>N</MOWBilled>
<ProductStartDate>2009-11-20</ProductStartDate>
<ProductUpdateDate>2009-11-20</ProductUpdateDate>
<ProductEndDate>2010-11-20</ProductEndDate>
- <AliasNames>
<AliasName>AT&T HSI</AliasName>
<AliasName>AT&T Fast Internet</AliasName>
</AliasNames>
- <OfferTypes>
<OfferType productCode="ABN" endDate="2009-11-20" />
<OfferType productCode="OneNet" />
</OfferTypes>
- <DynamicAttributes>
- <DynamicAttribute dataType="String" defaultValue="2.5 Mbps" name="Speed">
<AttrValue>1.5 Mbps</AttrValue>
<AttrValue>2.5 Mbps</AttrValue>
<AttrValue>3.5 Mbps</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="TransportType">
<AttrValue>T1</AttrValue>
</DynamicAttribute>
</DynamicAttributes>
</Product>
- <Product productCode="MSP2" modelType="Handset">
<ProductName>Blackberry Bold</ProductName>
<ProductDescription>Blackberry Bold Phone</ProductDescription>
<LegacyCoProdIndicator />
<RevenueCBLCode />
<VolumeCBLCode />
<SAARTServiceIDCode />
<MarginPercentRequired />
<PercentIntl />
<UOM>Each</UOM>
<PriceType />
<ProductStatus>Active</ProductStatus>
<Compensable />
<Jurisdiction />
<ActiveFlag>Y</ActiveFlag>
- <Availabilities>
<Availability />
</Availabilities>
- <Segments>
<Segment>SCG</Segment>
<Segment>PCG</Segment>
</Segments>
<VDIndicator>Voice</VDIndicator>
<PSOCCode />
<USBilled />
<MOWBilled />
<ProductStartDate>2009-11-20</ProductStartDate>
<ProductUpdateDate>2009-11-20</ProductUpdateDate>
- <AliasNames>
<AliasName />
</AliasNames>
- <OfferTypes>
<OfferType productCode="ABN" />
</OfferTypes>
- <DynamicAttributes>
- <DynamicAttribute dataType="String" name="StlmntContractType">
<AttrValue />
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="BMG 2 year price">
<AttrValue>20</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="MSRP">
<AttrValue>40</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="BMGAvailableType">
<AttrValue />
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="ProductId">
<AttrValue>123456</AttrValue>
</DynamicAttribute>
- <DynamicAttribute dataType="String" name="modelSource">
<AttrValue>product</AttrValue>
</DynamicAttribute>
</DynamicAttributes>
</Product>
</Products>
<CatalogChanged>Y</CatalogChanged>
</ABSProductCatalog>

Two options that come to mind. Others exist.
#1 - {thread:id=474031}, which is basically storing the XML in an Object Relational structure for parsing
#2 - Dump the XML into either an XMLType based table or column and use SQL (with XMLTable) to create a view that parses the data. This would be the same as the view shown in the above post.
Don't use sql*loader to parse the XML. I was trying to find a post from mdrake about that but couldn't. In short, sql*loader was not build as an XML parser so don't try to use it that way.

How to load data dynamically into target tables using files as a source

Hi ,
My scenario needs a single interface to load the data of 5 different files into five target tables using a single interface. All target tables have the same structure. It is possible to point to variable source files using ODI. But the same approach is not working with Database tables. I am getting errors while trying to make my target /source table as a dynamic one.
Can anybody suggest anything. The last option would be writing a dynamic PL/SQL block in the KM. Any other suggestions friends ?
Regards,
Atish

After creating a pair of identical source and target tables, I have carried out the following steps:
I am trying just keeping the target as variable
a)created a one to one interface,
b)tested that it is running.
c)created a variable(type =text),
d)used the variable as #v_name in the resource of the target table datastore.
e)in a package used the variable in a set variable step (first step).
f) used the interface as the second step.
g)executed the same in my context.
the <project_code>.variable_name is not getting substituted in the sql_code that is generated by the KM. My KM is SQL Control Append and following is the code that it generates in the Insert into I$ step:
/* DETECTION_STRATEGY = NOT_EXISTS */
insert /*+ APPEND */ into HR.I$_JOBS_COPY1
     JOB_ID,
     JOB_TITLE,
     MIN_SALARY,
     MAX_SALARY,
     IND_UPDATE
select
     JOBS.JOB_ID     JOB_ID,
     JOBS.JOB_TITLE     JOB_TITLE,
     JOBS.MIN_SALARY     MIN_SALARY,
     JOBS.MAX_SALARY     MAX_SALARY,
     'I' IND_UPDATE
from     HR.JOBS JOBS
where     (1=1)
and not exists (
     select     'X'
     from     HR.#PLAYGROUND."v_tab_name" T
     where     T.JOB_ID     = JOBS.JOB_ID
          and     ((JOBS.JOB_TITLE = T.JOB_TITLE) or (JOBS.JOB_TITLE IS NULL and T.JOB_TITLE IS NULL))
          and     ((JOBS.MIN_SALARY = T.MIN_SALARY) or (JOBS.MIN_SALARY IS NULL and T.MIN_SALARY IS NULL))
          and     ((JOBS.MAX_SALARY = T.MAX_SALARY) or (JOBS.MAX_SALARY IS NULL and T.MAX_SALARY IS NULL))
     )

Loading data in BW transparent table

Hi,
We have created some BW transparent table. As we need to load huge data in those table, can somebody suggest the best way of doing that instead of putting one by one.
SAP provides any utility for this purpose or not?
Otherwise, I can understand that we can write our own ABAP to insert the mass data in the table.
Help me with your experiences.
Regards,
Ashish

Hi Ashish,
If your data is in Flat files, you can go for BDC program(Batch Data Conversion). An ABAPer should help you out with this in writing down code to push data to SAP BW Transparent tables.
Hope it helps!!!!
Amit

How to justify the values in table using report generation tool kit

Hi
How can we align the values in excel table using report generation toolkit.
like left,right,center.
Regards,
hari
Attachments:
Report_excel.vi ‏34 KB
New Bitmap Image.JPG ‏134 KB

Hi,
A trigger is designed to be a part of a transaction, not it's end.
It is like following these steps (not really accurate, but should give an idea):
1. programA issues INSERT statement on tableA
2. 'control' goes over to the database
3. constraint checks happen
4. the associated triggers on tableA do their work (e.g. fetching a sequence value for a primary key)
5. 'control' goes back to programA
6. programA decides if a commit (no error occurred) or a rollback (error case) has to be issued.
Did this help? Probably not, I'm not happy with what I wrote, but anyway... :)

Error in updating custom database table using UPDATE SET Command

Hi,
I developed an automated collection system program in one of our clients simulating FBE1 (Payment Advice Creation) and F-28 (Posting of Incoming Payments) transaction codes. Upon posting, we encountered an error in PRD server wherein, for some of the posted items, the STATUS field in our custom table was not successfully updated. We tried to reverse the clearing document and debug the program. Upon posting, we were able to successfully update the status. We could not simulate the error in QAS since all the postings in QAS were successful and all status' relating to these postings were updated as well. We tried posting multiple times and the program seems to be working fine. In PRD, this behavior is just random and there is no specific pattern as to how the error occured. Provided below is the code I used for updating custom table ZFIACSF28. The STATUS field should be equal to '4' once the posting is successful. We are not sure if this is a database related issue. 7 users are authorized to do the postings in PRD and they are using the same user account.
CODE:
CALL TRANSACTION 'F-28' USING gt_bdcdata
                          MODE   'E'
                          UPDATE 'S'
                          MESSAGES INTO gt_messtab.
READ TABLE gt_messtab INTO wa_messtab WITH KEY msgtyp = 'S'
                                                 msgnr = '312'.
IF sy-subrc EQ 0.
update status for items cleared bearing the same OR Number*
    UPDATE zfiacsf28 SET status       = '4'
                         zsapdocument = wa_messtab-msgv1(10)
                         zruntime     = sy-uzeit
                         zrundate     = sy-datum
                   WHERE zor          = gv_zor
                   AND   customer     = gv_customer.
    COMMIT WORK.
ENDIF.

Hi,
it's not possible that status isn't updated in zfiacsf28 while date and time are updated there, because it's hard coded.
There must be other programs that also change your table zfiacsf28 and maybe clear those fields. Maybe the key fields zor and customer cannot provide duplicate access, what is the meaning of field zor ?
Please check the where used list of table zfiacsf28 to find other update programs.
Regards,
Klaus

SharePoint 2013 RSS Viewer not loading when other Custom web part using Update Panel or Ajax Timer control

Hi,
SharePoint 2013 RSS
Viewer web part failing to complete loading when the page loads.
This happens when having RSS Viewer and then adding a Custom webpart with an updatepanel and timer control.
I had used Ajax update panel and timer control to load the web part asynchronously after the main page is fully loaded.
The RSS-Viewer web part hangs in loading state while the custom webpart loads just fine.
The issue occurs when an like button click or Timer Tick event fires after the page
is loaded.
Haven't been able to track the issue.
Couple of workaround I tried to call a server side button click event from the custom web part after the page gets fully loaded using JQuery shown below did not work out either.
$(document).ready(function () {
$('#<%= netButton2.ClientID %>').click();
And
document.onreadystatechange = function () {
if (document.readyState == "complete") {
$('#<%= netButton2.ClientID %>').click();
Please let me know how to resolve this issue.
Thanks,
Franklin

Hi Johan,
The assignment of this user on the given task might be corrupted. Try to remove the resource from the task, publish the project, assign the resource again and publish again the project. If it is not working, try to unpublish the task (column "publish")
and publih it again.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Loading a falt file into table using sqlloader

I have a flat file (csv/txt) which has a header and a trailer record
I want to load it using SQLLoader , i want to skip this trailer/footer record.
Please suggest , due to some business rules i cannot use WHEN clause
I am on Oracle 11g

Well, maybe you'll get better help in theses spaces then, ODI is not really my cup of tea:
Data Integrator
https://forums.oracle.com/community/developer/english/oracle_database/export_import_sql_loader_%26_external_tables

Track user changes in customized transparent table

Greetings..
How do i to track user changes in my table ? is there any master table that keep track changes made by user on the specific field.? Is there possible if the table have the original and changed data.

i got the below explanation from other thread, which has explained by an expert, so, take it as reference and interprete according to ur req.
BEGIN
Table Events:
Go to SE11 and open your Ztable
click on the Table maintenance generator.
you can find the function group. right
Take the Function group name and go to Tcode SE37
and open the Function Group.
In the Status of the small window of the Function
group display
you can find out change requests , Main program and
Function group Docu tabs.
Click on Main program and create user defined Include.
check the sample code below
Click on main program
Create user defined include
User-defined Include-files (if necessary). *
INCLUDE LZPHIRF... " Subprograms
INCLUDE LZPHIRO... " PBO-Modules
INCLUDE LZPHIRI... " PAI-Modules
Create the below include.
INCLUDE LZPHIRI01. " PAI-Modules
Double click on the Include name. you have the below
code
Loop at Extract.
module liste_init_workarea.
chain.
field fild1
field fild2
field fild n
module set_update_flag on chain_request.
You have to add a new module here
check the below code
*----User defind module
Module user_defind_validation.
endchain.
Double click on module write code in that.
Include <Include Name> *
*& Module user_defind_validation
Module user_defind_validation.
Here you can write your own validations.
field2 = field1 /2.
field4 = field1 /4.
if field4 field3.
message.
endif.
EndModule. "user_defind_validation
Events allow you to change the generated table
maintenance dialog at predefined positions, which
cannot be reached by user modules in the screen flow
logic.
The user routines are called dynamically at runtime.
For this reason, the routines must be in a user include
in the table/view maintenance dialog function group.
All extended table maintenance global data is available.
An interface is only required for events 22 and AF.
The events can be additions or replacements.
Additional events
Event 01 before saving the data in the database
This event occurs before new, changed or deleted
entries are written to the database
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the
lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
END
thanq

How to load csv file to table using ssis

Hi,
i have loaded the csv file to table using ssis, it is working file but record is mismatch.
source data :
col1 col2 col3 col4
aa, bb, this is sample,data for the details, this is
column delimiter - comma
col3 - record contains comma. so col3 record after the comma is added with the as col4
i need the col3 record with comma.
so what is the column delimiter will use ?
Regards,
abdul Khadir

Hi Abdul,
Based on your description, you want to distinguish a comma is used for column separator or used in address column in a text file, then load the data from the text file to SQL Server table.
As per my understanding, if you can replace the comma column separator to another delimiter like semicolon (;), just do it. Then we can select Semicolon {;} as Column delimiter for the Flat File Connection Manager. Or ensure all columns are enclosed in double
quotes ("). Then we can set the double quotes (") as Text qualifier for the Flat File Connection Manager, and the commas will be loaded as part of the string fields.
If you can't have that done, because computers don't know the context of the data, you would have to come up with some kind of rules that decides when a comma represents a delimiter, and when it is just part of the text. I think a custom script component
would be necessary to pre-process the data, identify where a comma is part of an address, and then treat that as one field.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Function Module showing Transparent Table access??

Hi Guys,
I'm in the process of writing some programs that will archive some of our Custom tables (they are getting very full!).
Now, instead of going through ALL the custom tables we created, I'm trying to write a small program that will bring me tables that have certain criteria...
One of the criteria is Tables Access. I'm trying to see when last a table has been accessed (by a program, for example). Im not talking about the last Change Date (as per table DD02L entries) as I presume this actually indicates technical changes to the table??
Im looking for a Function Module that can actually give me the last date any given transparent table's data has been accessed...
Does anyone know of such a Function Module/Class?
tks
C
POINTS WILL BE REWARDED FOR USEFULL AWNSERS

Hello Christian,
To answer your question, it is normally obtained through ST04 (DB Performance Monitor).
However, the inherent information pertinent to Table Access made by application programs depends on the underlying Database involved. In case of DB server being ORACLE...you may use the program RSORASCC.
Also, I would like to make a further recommendation about your methodology to identify custom transparent tables. Besides studying the table accesses, it is very important to consider the current size and the growth rate over a period of time. For doing this, use DB02 (Space Statistics for Tables and indexes) and workout the list of tables which you have to concentrate from archiving perspective.
Hope this info helps you and resolves your query.
With Regards
Vijay Gajavalli

Loading a Z* custom transparent table using BW ETL tools

Similar Messages

Maybe you are looking for