Loading animation via ajax

I have a simple animation of some pictures fading in when a page loads that I want to work in an already existing page. The whole site uses jquery mobile, which uses ajax, which also causes problems with javascript running properly. Just using the default created by Edge animate, how can I set up to run the animation after the ajax call for its page?

No one knows how to modify the preload.js to run after its opened by ajax?

Similar Messages

Loading animation from Ajax

So i have an animated html document created in Edge Animate that I need to load via Ajax from a master page. I know i need to change in from onDocument.load to pageinit but I do not know where i need to put these changes. The code is too big to post so here they are on js fiddle. Please, any help would be appreciated.
preload
actions
edge

No one knows how to modify the preload.js to run after its opened by ajax?

Problem in loading animated gif

I have problem in loading animated gif with ClassLoader. Here is the code:
ClassLoader loader=this.getClass().getClassLoader();
URL res = loader.getResource(name);
if (res!=null) {
ImageIcon icon = new ImageIcon(res);
if (icon != null) {
Image image = icon.getImage();
if(icon.getImageLoadStatus() == MediaTracker.COMPLETE)
images.put(name,image);
return (Image) image;
} else {
System.out.println("Failed to load "+name+" error "+icon.getImageLoadStatus());
images.put(name,"");
Only when the gif is an animated gif, I get error message: Failed to load and icon.getImageLoadStatus() returns 2. Otherwise, it works.
Anyone encounters the same problem as me?

I think the problem is the asynchronous loading of the gif.
when you call f(icon.getImageLoadStatus() == MediaTracker.COMPLETE)
I think it is comming back MediaTracker.LOADING .
for an animated gif, it may not come back COMPLETE until after running thru
the whole automation. instead you could just check:
(icon.getImageLoadStatus() != MediaTracker.ERRORED)

(second time) Two questions - One is, Firefox will not sign me in completely and remember passweords., shown in details. Two- how to stop the loading animations

Since no one is replying, i have to try again
Deatails for number 1:
Firefox will not sign me in and remember my passwords at all. It first started on this site, New Jersey Online (NJ.com). I created an account there and Firefox will not log me in. That happened, January 3rd, 2012.
About NJ.com problem
I created an account there. Then I signed into my new account. I did get correct username and password. But the browser does not log me into the acount. I looked all around NJ.com for answer and my problem was not in the forums/blogs.
On Jan 4, 2012 - On the City Data forum I logged into my account there.
About the city data forum problem
I logged into my account there.
Firefox asked me if I want to remember this passwod, i said Yes. The box in city data forum has a remember be box I checked it.
The result means- I did not get signed in at all.
I tried multiple times, none worked.
I allowed firefox to do these things -
1. Remember browsing history for at lease one day
2. Remember download histroy.
3. Accept cookies from sites, including third party cookies, until their expiration
4. Clear the folowing when firefox closes: browsing history, download history, and form/search history.
I feel afraid this problem is gonna hsppen forever (and maybe even on this site!), and it will not sign me in to any site on the internet.
Number 2 Question
Any way to disable the loading animation in Firefox 3.6.15? it makes me forget what I was going to do. it's also shown in the addon update information. PLease help me disable the loading animation Everywhere in the Firefox browser.
For other sites with loading animations, I can use the Adblock plus element hiding helper . Just need to remove the animations by firefox
Please help me ASAP (as soon as possible), thank you!

See:
*https://support.mozilla.org/kb/Cannot+log+in+to+websites
Can't you sign in at all or aren't you signed in anymore if you revisit that website another time (next day)?
See also:
*http://kb.mozillazine.org/Websites_report_cookies_are_disabled
*http://kb.mozillazine.org/Cookies
What do you mean with the ''loading animation''?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Loading Facelets via ResourceHandler

Hi there,
can anyone tell me what's the main difference between JSF 2.0/2.1 and JSF 2.2 regarding to "Loading Facelets via ResourceHandler".
I searched many articles and discussions and regarding to Flows and reosource library contracts there are some thinks that are not really clear to me and might be still in discussion
In my opinion facelets and resources are loaded the same way now. The loading mechanism is unified now. But what does this mean.
Are Resources within the Facelets or Views are loaded relative to their path now ?
E.g. a view located in /x/y/z/view.xhtml will load its resources from /x/y/z/css/style.css when using <link type="text/css" href=css/style.css"/> and not from the resources folder ?!
It would be very helpful for me if anyone could provide a simple example or a link where i can the right information, because it's one of the 6 big ticket features ed burns is mentioning in every article and presentation i saw, but the background is not completly clear for me :-/
Thanks in advance!
Kind regards,
Jannis
Edited by: 988043 on Feb 14, 2013 1:49 AM

Tank you Eddy, but it seems it does not work.
The error message received from DTW is:
- <BOM>
- <BOM>
- <BO>
- <AdmInfo>
<Object>66</Object>
<Version>2</Version>
</AdmInfo>
- <ProductTrees>
- <row>
<TreeCode>A00001</TreeCode>
<Quantity>1</Quantity>
<TreeType>iProductionTree</TreeType>
</row>
</ProductTrees>
- <ProductTrees_Lines>
- <row>
<Currency>USD</Currency>
<IssueMethod>im_Backflush</IssueMethod>
<ItemCode>A00006</ItemCode>
<Price>160</Price>
<PriceList>1</PriceList>
<Quantity>3</Quantity>
<Warehouse>01</Warehouse>
</row>
- <row>
<Currency>USD</Currency>
<IssueMethod>im_Backflush</IssueMethod>
<ItemCode>S10002</ItemCode>
<Price>160</Price>
<PriceList>1</PriceList>
<Quantity>3</Quantity>
<Warehouse>01</Warehouse>
</row>
</ProductTrees_Lines>
</BO>
</BOM>
<ErrorMessage>A00001 - Errore definito dall'applicazione o dall'oggetto</ErrorMessage>
</BOM>

Adding a Loading Animation to a Captivate movie for use in a RoboHelp Project?

Hello all:
I'm inserting SWFs (built in Captivate 5) into Robohelp topics (using RoboHelp 9, publishing to WebHelp Pro output). These topics hold only the SWFs, so I've published the SWFs to autoplay when opened.
The problem is this: when I publish my RoboHelp project, my Captivate movies display as image icons (see screenshot). There is no loading animnation or screenshot to indicate that the Captivate movie works. If I wait a few seconds (variable, depending on file size of the SWF), the movie will appear and start to play. I'm concerned that my user will think the file is broken and leave the page.
How can I enable a loading animation (or even a loading image) to show my user that there is, in fact, content on the page when the topic loads? I'd like to keep the auto-play functionality, if possible.

The best option is to break out the words because it gives you the most control. However, if the two words you want to glow are next to each other you can use the Sequence Text behavior.
Select the text and apply Text Animation/Sequence Text to the layer. In the behaviors tab, click on the Add parameter and select Glow/Color. This will create a parameter that you can assign to a character, word, line or custom area.
Now you'll need to add several parameters so repeat the above step adding parameters for Glow/Opacity, Glow/Blur, and Glow/Radius. You might even want to change the color of the font for those two words. If so, add a parameter for Face/Color.
Once you have all the parameters added, change the Traversal parameter to Custom. Change the Select parameter to Custom. Use the Start parameter to determine the beginning of the "glow" area, and the End parameter to fix the end of it. Set the Spread to 0 so there is no spillage of the glow to the words on either side.
Now adjust the color, blur and radius of the glow just as you would if you were adding it to the entire paragraph.
Andy

Business Catalyst Log in form via AJAX

Hi guys I am trying to avoid the standard form redirection of Business Catalyst to a more customisable style but I cant get it to respond properly.
Here is my code:
$("#login-form").submit(function(e) {
        e.preventDefault();
        $.ajax({
            type: "POST",
            url: $(this).attr("action"),
            data: $(this).serialize(),
            success: function(e) {
                window.location = 'https://bestkilts.worldsecuresystems.com/user-system/order-history.htm'; // I know this can be set from the form submission but I have other plans
            error: function(e) {
                $(".form-error").slideDown();
                $(".form-error").delay(8e3).slideUp(300)
The form is already submitting via AJAX! "&JSON=1".
Eventually the error message responds as a success! so I cant really look at the AJAX response to code this precise.
Please any one there with some knowledge about it please share.

Only custom web forms in BC have an ajax / json response request, that will not work with the login form and some others in BC.
You will need to do your own ajax request but then you will not issues about the cross domain etc. You need to look at how the BC login works, your refresh and how to address that. (Its more complicated then you think)

HTML website, SWF do a load animation only once. Same file used on all pages?

Hey all,
Just going through some thinking here. My HTML website is
going to using a flash header and navigation. Now I will be using
the same swf's on all of the pages across the site. I would like to
play a loading animation only on the first time the swfs are
loaded. Is there a way to do this? Or because I am using the same
swf's will it be okay to just tell my mc to go sit on a specific
frame and because it is in the cache each page will be using the
same file so the mc will still be at that frame or???
And help would be nice...

While Breqent is right that server side includes are the best way of doing this if you aren't up on
server side coding then you can use Dreamweaver to manage you menu.
You do this by simply ensuring you never edit the menu area on any individual page.
It should therefore be identical on all page and as such you can just use find and replace across the entire site or folder to edit all occurances of your menu.
I hope this helps.
Andy
Best Reception

How can I get a loading animation to play while fly playback component loads a file?

Hi team,
Two part question here..
So I have a FLV playback component and a number of .flv files that it loads   ------> using video1.source="film/whatever.flv";
There is a slight delay while the file loads and so I would like to
A) make this pause a bit longer (it would be so fast at the moment that any loading animation would be subliminal, but with nothing at all you get a second of blank which is not good either- so if I can get it to be a bit longer, like say 2 seconds..
B) have an animation play while this happens..
It does not need to show progress or anything, just like a spinning wheel or whatever.
I have been playing around with bufferTime but not really getting anywhere..
Can anyone help me out?
Thanks
sub

Here is a test with one flv player (video1) and two buttons (butt and butt1)
Ok so I have some code that kind of works using the countdown timer... but I obviosuly dont know why it works because if I change the seconds count down from 1 to 2 it only works once.
I get "working"
         "working" trace twice and it works
After that I get the "working" trace but nothing happens    ...    I am close but would really like to understand a bit more what I am doing!
Any help greatly appreciated.
Cheers
Sub
import flash.events.MouseEvent;
var fl_SecondsToCountDown:Number = 1;
var fl_CountDownTimerInstance:Timer = new Timer(1000, fl_SecondsToCountDown);
video1.visible=false;
video1.load("film/film1.flv");
video1.stop();
butt.addEventListener(MouseEvent.CLICK, go);
function go(e:MouseEvent){
          video1.visible=false;
          fl_SecondsToCountDown = 1;
fl_CountDownTimerInstance.addEventListener(TimerEvent.TIMER, fl_CountDownTimerHandler);
fl_CountDownTimerInstance.start();
    video1.load("film/film1.flv");
butt1.addEventListener(MouseEvent.CLICK, go1);
function go1(e:MouseEvent){
          video1.visible=false;
          fl_SecondsToCountDown = 1;
fl_CountDownTimerInstance.addEventListener(TimerEvent.TIMER, fl_CountDownTimerHandler);
fl_CountDownTimerInstance.start();
          video1.load("film/film2.flv");
function fl_CountDownTimerHandler(event:TimerEvent):void
{trace("working");
          fl_SecondsToCountDown--;
          if(fl_SecondsToCountDown==0){
                    trace("done");
                    playmovie();
                    fl_CountDownTimerInstance.removeEventListener(TimerEvent.TIMER, fl_CountDownTimerHandler);
function playmovie(){
          video1.visible=true;
          video1.play();

Hi everyone i tried to modify BCA so i can use a usb to load windows via BCA but now it doesn't load when i double click it!?

i tried to modify BCA so i can use a usb to load windows via BCA but now it doesn't load when i double click it!? any ideas?

iv solved it now

Loading dimension via plsql

Hi
I am trying to create a dimension and load it via plsql and am able to create dimension and its corresponding table in database.I am quite unsure of how to load the dimension D_OFF from an equivalent relational table R_OFF
I have a dimension D_OFF with following structure.
Hierarchy:OFFKEY is child of OFF30 is child of OFF20 is child of OFF10
Levels -->Attributes
OFF10 ID--> CD ,DSCR
OFF20 ID -->CD ,DSCR
OFF30 ID-->CD ,DSCR
OFFKEY ID-->CD,DSCR,UPDATE BY,UPDATE_DATE,CREATE BY, CREATE_DATE
I have created the dimension and the table structure in the database and are as follows
CREATE DIMENSION D_OFF
LEVEL "OFF10" IS "OFF10_ID"
LEVEL "OFF20" IS "OFF20_ID"
LEVEL "OFF30" IS "OFF30_ID"
LEVEL "OFFKEY" IS "OFFKEY_ID"
HIERARCHY "STANDARD" (
"OFFKEY" CHILD OF
"OFF30" CHILD OF
"OFF20" CHILD OF
"OFF10"
ATTRIBUTE "OFF10" DETERMINES ( "OFF10_CD", "OFF10_DSCR" )
ATTRIBUTE "OFF20" DETERMINES ( "OFF20_DSCR", "OFF20_CD" )
ATTRIBUTE "OFF30" DETERMINES ( "OFF30_DSCR", "OFF30_CD" )
ATTRIBUTE "OFFKEY" DETERMINES ( "OFFKEY_DSCR", "UPDATE_DATE", "OFFKEY_CD", "UPDATE_BY", "CREATE_DATE", "CREATE_BY" )
CREATE TABLE "D_OFF"
( "DIMENSION_KEY" NUMBER NOT NULL ENABLE,
"OFF10_ID" NUMBER,
"OFF10_DSCR" VARCHAR2(200),
"OFF10_CD" VARCHAR2(500),
"OFF20_ID" NUMBER,
"OFF20_CD" VARCHAR2(500),
"OFF20_DSCR" VARCHAR2(200),
"OFF30_CD" VARCHAR2(500),
"OFF30_DSCR" VARCHAR2(200),
"OFF30_ID" NUMBER,
"UPDATE_DATE" DATE,
"CREATE_DATE" DATE,
"UPDATE_BY" VARCHAR2(250),
"OFFKEY_ID" NUMBER,
"CREATE_BY" VARCHAR2(250),
"OFFKEY_CD" VARCHAR2(500),
"OFFKEY_DSCR" VARCHAR2(200),
CONSTRAINT "OFFE_DIMENSION_KEY_PK" PRIMARY KEY ("DIMENSION_KEY")
My source table is
CREATE TABLE "R_OFF"
( "DIMENSION_KEY" NUMBER NOT NULL ENABLE,
"OFF10_DSCR" VARCHAR2(200),
"OFF10_CD" VARCHAR2(500),
"OFF20_CD" VARCHAR2(500),
"OFF20_DSCR" VARCHAR2(200),
"OFF30_CD" VARCHAR2(500),
"OFF30_DSCR" VARCHAR2(200),
"UPDATE_DATE" DATE,
"CREATE_DATE" DATE,
"UPDATE_BY" VARCHAR2(250),
"OFFKEY_ID" NUMBER,
"CREATE_BY" VARCHAR2(250),
"OFFKEY_CD" VARCHAR2(500),
"OFFKEY_DSCR" VARCHAR2(200),
Could you please let me know how to load the dimension via plsql.
Best Regards,
Sri

I assume you're quite sure that the relevant dimension does at least sometimes get updated by the build process, and that you've searched the outline just in case the member was added somewhere you didn't expect.
How is the data pulled in to the load rule? If it's from a relational database, check the SQL query used to extract it (could there be a WHERE clause restricting records)? If it's from a flat file, check the select / reject criteria set up in the load rule.
Another possibility is that your load rule is set up to skip X lines at the beginning, and the new member appears there.
You could build a brand new load rule against a test copy of the cube and confirm that ABC does build in successfully (that at least tells you that the problem is in your rule somewhere).

Is it possible to set webapp item releaseDate when submitting via ajax?

I've been trying to set the releaseDate of a webapp item when entering the item via ajax. So far I have been unable to do so....is it possible?
For the field name and date format I referenced the API docs.
I've tried both releaseDate and ReleaseDate
Here's the console of the variable before submission
theItemName: Test
strDate: 12/14/2014
Here's the relevant submit code
          var testOpts = {
                url: profileAction,
                data: {
                    ItemName: theItemName,
                    releaseDate: strDate
                type: "POST",
                success: function(data, txt, jqXHR) {
                    console.log("submit success");
                error: function(jqXHR, txt, error) {
                    console.log("submit error");
                    return false;
            $.ajax(testOpts)
Anyone done this successfully?
Thanks
Dave

Hi Dave,
The date format specified in the parameters section was incorrect, I have fixed that and will push the update shortly. The correct date format is YYYY-MM-DD - sorry for the inconsistency.
I have just re-tested the sample code here - Reference guide - Create web app item (that one had the correct format and it was working properly.
Thanks and have a nice weekend,
Mihai

Update "rendered" attribute via ajax

Is there a workaround to update the "rendered" attribute of a commandLink via AJAX? I'm getting an error 'malformedXML: During update: j_idt12:prevCmd not found'.
code snippet:
<h:commandLink action="#{controller.previous}"
                                   value="Previous"
                                   rendered="#{controller.hasPreviousPage}"
                                   id="prevCmd">
     <f:ajax render="table prevCmd nextCmd" immediate="true"/>
</h:commandLink>
<h:commandLink action="#{controller.next}"
                                   value="Next"
                                   rendered="#{controller.hasNextPage}"
                                   id="nextCmd">
     <f:ajax render="table prevCmd nextCmd" immediate="true"/>
</h:commandLink>

Try adding the form name to the components names:
<f:ajax render="form1:table form1:prevCmd form1:nextCmd" immediate="true"/>

Using flash shared object to have a load animation play only once

Hey all I have a swf on multiple pages, I onyl want it to
play the load animation once, so I thought I would try the shared
object to do this.
//On frame 1 on my mc if it hasnt played the file below it
should to gotoAndPlay frame 1 of my mc, logo_mc
logoload = SharedObject.getLocal("logoload1");
if (logoload.data.logoloadvar == undefined){
_root.logo_mc.gotoAndStop(30);
} else {
_root.logo_mc.gotoAndPlay(1);
stop();
//at the end of my load animation frame 30 of logo_mc I am
trying to tell the shared object that its has played, so I put
something in it:
stop();
computer = System.capabilities.os;
_root.logoload.data.logoloadvar = "logoseen";
_root.logoload.flush();
But it does not appear to be responding, what am I doing
wrong there? Its the first time Ive used the object.
Any help would be great.

Wow. That is exactly what it was, thanks so much. Our IT guys are working on the problem now. Thanks again.

Load balancing via CHOC12/STS3

Hi, our customer has a connection between 2 x 12012 via the 4 embedded channels of CHOC12/STS3 module.As every subinterface has its own ip-subnet we have 4 equal paths to every destinations.
Customer wants to configure dCEF per-packet load balancing and is concerned if he can get packet sequence problems for his VoIP applications like it may happen on 'normal' equal path cost connections when load balancing per-packet instead of per-destination.
Does anybody know if this can be a concern on the embedded channels ?
Regards Guenther

Generally speaking, for a given source-destination pair, with Per-packet load balancing enabled, packets might take different paths which could introduce reordering of packets. Thus Per-packet load balancing is inappropriate for voice over IP traffic and also for certain other types of data traffic that require packets received to be in sequence. For more information please see
http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800ca62c.html#3589. Whether the CHOC12/STS3 module has some special meachanism built in to take care of this is unknown to me. Per-packet load balancing via CEF is not supported on Engine 2 Gigabit Switch Router (GSR) line cards (LCs).

Loading animation via ajax

Similar Messages

Maybe you are looking for