Loading custom content

Logic Pro 9.1.8 installed from Logic Studio v.2.0 (dated 2009 on my disk) Program is installed and working perfectly on my Macbook Pro, OS 10.8.2.....I did Not install Additional Audio content and Jampack libraries on initial install. Am now trying to install audio content and jampack libraries onto external drive. External drive is a mac formatted drive with other working audio libraries on it. Sharing permissions for this disk are all in order. ...Alert comes up....Logic installer will Not allow me to install any content on external drive. "Logic Studio cannot be installed on this disk. This software must be installed on the running system"......What gives?? Ive checked ONLY the Audio content, "Logic Studio" and ALL other apps are Unchecked, Apple loops also. No matter What configuration of content that I try, this alert comes up. Is this a Mountain Lion thing?...... But Logic works Perfectly!.....BTW, when I double click installer package icon, an alert comes up saying, "To open "Logic Studio", installer must quit and open".........?......Help

Hi
The "Download additional content" function will not allow you to install to a location other than your boot drive.
If you have disk space problems, I suggest that you download the content in sections, and then move them to your external drive. With the Apple loop content, this is relatively straightforward. With the other content (EXS sample library etc) there are some more hoops to jump through.
discuss54 wrote:
Solid state drive is too small. All my other virtual samplers/virtual instr allow me to keep content on separate drives, why not Logic?
http://www.apple.com/feedback/logicpro.html
CCT

Similar Messages

How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

Dear SharePoint Developers,
Please help.
I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
I think this is a "sealed column", whatever that is, which is shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
I know when I set the column order in my custom Content Type settings page, it is correct.
But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
Can you help?
Please advise.
Thanks.
Mark Kamoski
-- Mark Kamoski

Hi,
According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
Drill down into one of them and you'll see the option under the list of columns for that content type.
To apply the column order in the NewDocSet.aspx page, you need to:
Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
Content Types section, choose Refresh all published content types on next
update.
Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
More information:
http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
Best Regards,
Linda Li
Linda Li
TechNet Community Support

I keep getting the "An error occurred loading this content" message

How do I fix the "An error occurred loading this content" message?

ATV2 with latest October 2014 update.
Same problem here as well. Downloaded an update back in August because it was forcing it down my throat. Ever since then I've been having the same problem over and over. I downloaded the most recent update (October 2014) and the issue was not fixed. I've restarted, rebooted, waited, downloaded most recent software, done 42 headstands, gone to counseling and still no changes. I don't have cable but watch Netflixx and Youtube on my ATV for entertainment. Netflixx and Youtube are not issues on my phone or computer. I believe this is an ATV issue.
Come on Apple, whats going on with you guys recently? Your quality in products is declining, people are starting to buy other than Apple products, and it doesn't seem like you guys really care for the consumer. I've been a die hard Apple guy owning iphone, macbook, and ATV but strongly considering switching. Calling the Apple gurus who know things about stuff. CAN YOU PLEASE FIX THIS ISSUE IF YOU WANT TO KEEP ME AS A CUSTOMER????????
Has anyone successfully fixed their ATV issue?

TS2972 An Error Occurred Loading This Content Please Try Again Later

This seems to be a pretty common issue that many of us users are having. But mine is a bit different...
I had had no problem at all in the first 3 months of using my ATV, but then all of a sudden during a Tv Show i was watching via Home Sharing the error appeared, mid show!
I have tried exiting to the main menu, restarting, rebooting anything and everything connected to eitehr my laptop, ATV, Router and TV.
All of the files are mp4s and open in itunes no problem, and if I load them on to my iPad and start watching through the TV from the iPad's AirPlay it works fine.
Some files work sometimes but not other times, and there seems to be no rhyme or reason as to why some work when others don't.
Has anyone got any ideas of what the problem is and how I can fix it?!

I bought Flight and have never been able to watch it. Get the same error message every time.
"An error occurred loading this content. Please try again later."
How do I get a refund? Anyone know?

Spry Tabbed panels + Progressive Enhancement and Dynamic Loading of Content With Spry

Is there any way to combine tabbed panels together with "Progressive Enhancement and Dynamic Loading of Content With Spry"?
Visit: http://labs.adobe.com/technologies/spry/articles/best_practices/progressive_enhancement.ht ml#updatecontent
And click on the "Using Spry.Utils.updateContent()"
The 3rd example shows how to use a fade transition whenever the content changes.
I already have tabbed panels. My menu contains buttons (on tabs) and my Content div contains the panels.
Tabs code;
<ul class="TabbedPanelsTabGroup">
          <li class="TabbedPanelsTab">
               <table class="Button" >
                    <tr>
                    <td style="padding-right:0px" title ="Home">
                    <a href="javascript:TabbedPanels1.showPanel(1);" title="Home" style="background-image:url(/Buttons/Home.png);width:172px;height:75px;display:block;"><br/></a>
                    </td>
                    </tr>
               </table>
          </li>
etc
etc
etc
and the panel code:
<div class="TabbedPanelsContent" id="Home">
     CONTENT
</div>
I hoped i can use the example code from the link into my tabbed panels.
I thought this code:
onclick="FadeAndUpdateContent('event', 'data/AquoThonFrag.html'); return false;"
could be added to the tab code like this:
<a href="javascript:TabbedPanels1.showPanel(1);" onclick="FadeAndUpdateContent('event', 'data/AquoThonFrag.html'); return false;" title="Home" style="background-image:url(/Buttons/Home.png);width:172px;height:75px;display:block;"><br/></a>
But the content doesnt fade...
I know i need to change the header etc.
The following is from the link:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:spry="http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Aquo Events</title>
<script src="../../../includes/SpryEffects.js" type="text/javascript"></script>
<script src="../../../includes/SpryData.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
<style type="text/css">
/* IE HACK to prevent bad rendering when fading. */
#event { background-color: white; }
</style>
</head>
So i changed my header etc, put the SpryEffects.js and SpryData.js into position and nothing changed...
Is there a way to keep my tabbed panel (or change as less as possible) and let
A. The fade work
B. The loading work.
The problem now is that it loads all pages instead of only the home. Therefore i wanted this Progressive Enhancement.
And the fading part is just because its nice...

It doesnt show in the post but off course i changed this link;
"data/AquoThonFrag.html"
into;
"javascript:TabbedPanels1.showPanel(1);"
I must say i dont know if this even works...

How to use custom aspx page as template for custom content type

Hi,
I have created custom content type and custom aspx page. I want to use aspx page as template for custom content type.
Can anybody please let me know how to accomplish this?
Any help would be appreciated.
Thank you,
AA.

Check if you are looking for the below
http://www.sharepointpals.com/post/How-to-Create-a-Page-Layout-(PageLayout)-with-ContentType-in-SharePoint-2013
Please remember to click 'Mark as Answer' on the answer if it helps you

Rented movies on ATV2, can't play- An error occurred loading this content.

When I attempt to play the two movies on ATV (Gen 2) I rented, I receive the error:
An error occurred loading this content. Try again later.
No other messages display, and it is not clear what to do next, or how to fix this issue.
I tried the following to solve:
- latest updates for ATV (I'm on version 4.2.1(2100))
- unplugging power, then plugging back in
- stop "Home Share" on ATV, then turn back on
- log out of iTunes account on ATV, then log back in
I've yet to try:
- reset on the ATV (on the General menu)
- setting back to factory defaults (on the General menu)
I have not tried the above two, since the ATV is 2 days old and honestly did not think I needed to do this.
I have two Windows computers, one with Vista, one with version 7. Both have iTunes 10.2.1.1 installed. I have iTunes "Home Sharing on" for both computers, including the ATV. I can see my iTunes library on the ATV and play music; I can also play iTunes radio just fine with the ATV. I've been able to access my NetFlix account and stream movies just fine with NetFlix.
I was able to purchse the movies, but not able to play on the ATV; thus, I seem to be able to get to iTunes since I could at least rent movies.
Is there anything major to double check to make sure I've set everything up right? The book that came with ATV looked pretty plug-n-play, but I cannot get this to work (playing videos). I also have an iPhone that I just purchased- I've plugged this into the Vista computer to do sync's and get updates, but don't have it plugged in on a reqular basis.
What am I missing to try and troubleshoot?
Thanks much!

I bought apple tv a few weeks ago. It worked to start with but was very slow and not really usable as when you picked a movie it would take anything from 20 mins to 6 hours to start. I assumed it would to memory but it doesn't so you have to sit and wait for it to start which renders it completely useless.
Then came a software update about a week ago. Since then it no longer loads rented movies. After I have paid for the movie it says press play. After that it says "unable to load content, try later"
I emailed apple support. They dont know what the problem is so they refunded my money and removed the films from my apple tv.
Apple also asked questions About my iTunes version etc which is completely stupid as this has nothing to do with itunes as apple tv is 100% independant and designed as a stand alone device.
My advise- I will get a refund and use the money to buy apple tv 1 from ebay as it has a hard drive and loads movies in the background rather than using a stream.

Apple TV and Home Sharing "An error occurred loading this content"

Recently I moved and switched my homeshare library from my Mac to a Window8 PC. I'm running the same network equipent, but the bandwidth to the internet was less in the new place then the old one so I wanted to store more on the PC. My bandwidth to the internet is slow at times so I like to download to my PC and watch the shows on my appletv. I thought it might be a Windows 8 issue, but I powered up my Mac Pro (2008) again and it has the same problem. I thought it might be a WIFI issue so I ran network wires, same issue. The only new thing I can think that happened was the apple tvs recently took a SW update, I'm not sure what version they had before. (tend not too look at versions when things are working).
What I know:
All the shows play fine when I stream. (they can just take a 5-10m to start due to internet bandwidth, but they play fine).
Some shows play fine with homesharing (I have found no common thread between ones that do and don't).
All shows play fine on my PC in iTunes
Between my 2 AppleTvs (both running version 6.1) It is consistent which shows will play in home sharing and which will not. There have been a couple shows that will play on one but not the other and a couple shows that won't play one day but will the next day.
I have tried playing a show that will not play over and over for 10m. The status remains the same.
If the show has an option to resume playing or start from beginning. I'll be asked "Resume/Start over" first then be told "An error occurred loading this content"
The first time I try and play a show it takes 5-10 seconds to give me an error, repeat attempts typically take < 1 second to show the error.
Most shows on both my AppleTVs with home sharing return an error "An error occurred loading this content". I've tried running network wires, rebooting, holding menu and shift down to reboot, pulling power. I have examined the files that play versus ones that do not and they all appear to be in good working order. As an example. Episode 1, Season 2 of Big bang theroy plays fine, but Eposodes 2-5 don't, but then Episodes 6-8 do play ok. I find the same problem with Movies and Music Videos.
Setup Facts:
Asus Wireless Router is connected to my DSL modem into the Ausus router WAN port. The ASUS router creates a network 192.168.1.X my DSL has a 192.168.0.1 IP address.
On the AppleTV it has a valid IP address and I'm fairly confident the network is ok since I have NO issues streaming any shows from the internet via Music, TV shows, Movies, Hulu, Netflicks, etc.
PC is running Windows 8 and I've disabled all power reduction settings to be always ON. (Again some shows play fine, the ones that play seem to always play). Running itunes version 11.1.5.5
All the shows are ones I've downloaded iTunes. None of the shows are handbraked home videos.
AppleTV version 6.1 for both AppleTVs.
What I've tried:
Power Clearing Devices
Switching locations of Apple TV with different TVs
Trying Mac Pro and Windows 8 Home Shares
WiFi and networked
Changing HDMI Cables.
Every TV I have, 1: Sony (new), 1 LG (about 2 yers old), 1 Samsung (about 5 years old).
Any Adivce?

I have it working now.. BUT I still don't have 100% on both appleTVs. I'd guess it's closer to 99% (which is a huge improvement).
What I've done since:
First I verified that I had open on my firewall the correct ports. I use AVG Internet security so verified I had it setup ok. (this was after I tried a few times with it off). (this produced no improvement)
TCP
direction both ways
local ports 3689
remove port(s): all
remote addresses:all
UDP
direction both ways
local ports 5353
remove port(s): all
remote addresses:all
Might have been over kill, but I assigned both AppleTVs a fixed IP 192.168.0.200 and 201. by their MAC address on my router. I then added them to the whitelist in AVG Internet Security
I saved changes and rebooted my PC, AppleTVs and PCs
It still didn't work. (I described the above because when I tried removing them no shows played, so more an FYI if 100% of your shows don't play).
I then downloaded itunes (11.5) same version I was running.
I used 7-zip (winrar should work too) to unzip the file iTunes64Setup.exe into a folder iTunes64Setup. This is important, which I'll explain in the next steps.
I then ran the iTunes64Setup.exe and selected repair.
it then told me it could not find iTunes64.msi. which I gave it the directory iTunes64Setup that I had expanded the iTunes64Setup.exe into that directory. (Really apple??? This one anoyed me that it was in the EXE but I had to manually expand it and put it somewhere for you to refind )
It completed the setup and I rebooted my PCs and AppleTVs again.
I went to a show that was consistently not playing and it worked on both TVs. I'd say 99% are working fine now. What's special about the remaining shows I do not know. If the file was corrupt I would not expect to be able to play it on another appletv.
The few files that don't play:
I'm now convienced that my network is fine. with 99% playing ok. If it was an intermitent problem with the network I'd expect that re-attempts to play the shows would produce different outcomes.
What have I tried:
I've done a factory reinstall of the appleTV. (my advise is don't waste you time, it did nothing except eat up 30m of my time watching redownload and then entering passwords).
I've tried deleting the shows that don't play (which do play on my computer) and redownloading them (same outcome) (again, my advice would be don't waste your time). When I did a check of the files they redownloaded identically with only the creation dates different.
Open to move things to try. Any ideas anyone?

Cannot get rid of default field in a custom content type

hi guys,
I have custom content type based on Document Set in a List based on Document Library. I created both using XML declaration in SP solution.
I have all fields in my content type which I declared, except to defult fields: 'Name' and 'Description'. I need to hide both of them. After I set Inherits="FALSE" in ContentType section in Elements.xml in ContentType description the field
'Description' goes away. But the field 'Name' marked as required and stays.
I've also tried to add RemoveFieldRef parameter to the same Elements file, but the field persists. I assume it comes from list definition, not content type. But I cannot figure out how to get this field out from list definition.
Do I miss something?

I am assuming that content type's elements.xml file is looking like this
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">

<ContentType ID="0x0120D520008d2ff418027e4c31b54d155b98596748"
Overwrite="True"
Name="Custom Dossier"
Group="Custom group"
Description="Custom dossier"
Inherits="True"
Version="0">
    <FieldRefs>
            <FieldRef
ID="{8D6C094C-3E1F-41f4-BEE3-25B27EE09702}"
Name="Dossier_Nummer"
DisplayName="Dossiernummer"
Required="True"
/>
    </FieldRefs>
    <XmlDocuments>
      <XmlDocument NamespaceURI="http://schemas.microsoft.com/office/documentsets/allowedcontenttypes">
        <act:AllowedContentTypes
xmlns:act="http://schemas.microsoft.com/office/documentsets/allowedcontenttypes"
LastModified="05/31/2012 08:46:56">
          <AllowedContentType
id="0x0101"
/>
          <AllowedContentType
id="0x0101000490d50c50624b6ca21c637ef39cd89b"
/>
        </act:AllowedContentTypes>
      </XmlDocument>
    </XmlDocuments>
</ContentType>
</Elements>
In the FieldRef section ,we have <FieldRef
ID="{8D6C094C-3E1F-41f4-BEE3-25B27EE09702}"
Name="Dossier_Nummer"
DisplayName="Dossiernummer"
Required="True"
/> this field is there.
Try to add ShowInNewForm="TRUE" ShowInEditForm="FALSE" those attributes.
or    Hidden="FALSE"
Sorry for the bad English. Could you paste your code.So that we can assist u.

Load remote content in messages (Mail)

Hello All,
Iv'e just upgraded to Yosemite today, and so far, so good, a few teething issues.
The biggest problem I have is with the Mail App.
I just can't get to see remote contant in Mail messages (using my Apple iCould account)
I had no problems in Mavericks, did a straight upgrade. I have tried Preferences -> Viewing -> Load Remote Content in Messages,, but the images in messages just won't show. I am being presented with little boxes and question marls in the place holders of the images.
I have tried to toggle on/off whilst restarting the mail app, but no joy. This is a real deal breaker for me, as mail is probably the main app I use. And having to click the links to open the image in a web browser is a show stopper.
Any help here would be much appreciated, just to add, I had no problems with the Mavericks mail app. This is installed on my Mac Pro (mid 2012) and I'm reluctant to upgrade on my Macbook Air at the moment.

Bingo!
Stupid me… This was the reason it didn't work for me. Thanks!
The rule in Little Snitch that broke the images was this one:
/Applications/Mail.app/Contents/MacOS/Mail
Deny any outgoing connection
Process Owner: Me
On 06/02/2014, Mail tried to establish a connection to static.avast.com on port 80 (http). The request was denied via connection alert.
I guess Mac OS X 10.10 somehow toggled this rule!?
Thanks again, the rule has now been deleted :-)
/Peter

How to create custom content placeholder in sharepoint 2013

Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
Thanks,
Johnweb

Hi,
If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder
<asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
<asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
I suggest you provide your basic requirement for further research.
If you want to customize a master page, the Rajendra's method would be helpful.
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

"could not save list changes to the server" while creating a new form in SharePoint Designer - custom content type

i am getting "could not save list changes to the server" while creating a new form in SharePoint Designer.
Actually the list was created with a custom content type. When i try to create a new form from the custom content type, it fails.
However, when i try to create a form using item content type, it creates a form successfully.
Could you please let me know hte workaroud for this.
Tnx

Hello,
This link may be help you to create custom form using content types:
http://blog.splibrarian.com/2011/03/21/using-content-types-to-modify-the-newform-aspx-and-editform-aspx-pages/
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help <br/>(On vacation from 16th Oct to 28th Oct 2014)

An error ocurred while loading this content! Ive using my ATV for more than 6 months and last week i update the sw and since then i have rented two movies and keep seeing the same message. I have reset the ATV two times without success. Any suggestions?

I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
I restarted the ATV - no success
I reset my wireless - no success
I reset my ATV - no success
netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
Any ideas?

I keep getting this message: AN ERROR OCURRED WHILE LOADING THIS CONTENT
ATV was working fine until i did a version update last week. Since then i have rented two movies and keep getting the same message
I restarted the ATV - no success
I reset my wireless - no success
I reset my ATV - no success
netflix is working fine since i was able to see a movie there. Youtube was also working fine. I think there should be something wrong with iTunes
Any ideas?

I can no longer edit my custom content management system using Firefox

Hello,
I work for the University of North Carolina. We have a very old custom content management system that is built in Oracle (UCM). When logged in, it has little edit buttons that allow you to click on items and launch edit windows. I don't know what's behind that -- it's not Java. I'm thinking javascript? All I know is that since the Firefox upgrade to 13.0.1, the edit buttons no longer display, and the sites are not editable.
So far, the only way we've been able to allow people to edit their sites is by forcing them to use IE9 in compatibility mode. All other browsers fail for various reasons. Firefox is our workhorse browser, but we're desperate to have Firefox back.
I understand we also have some problems with our Remedy application -- not sure what's happening, but it's also no longer functional in Firefox. I'm wondering if there is a patch in the works that will address these issues?
BTW, it sounds a lot like this issue here: http://support.mozilla.org/en-US/questions/930042

Drat... So, we tried taking out the javascript entirely. No real change, except lightbox actions would not function. Then, we tried referencing a different javascript version. No difference, except that lightboxes and Carousels still would not function.
To see if the $ error was universal across all of our sites, I logged into four or five other UCM sites. None of them threw the $ error, only the Art site. What's interesting is that for all sites, you can see editable areas if you look for them (e.g. mouse randomly around the areas where there used to be buttons to click on), but the icons continue to not show up.
The warnings coming from the console seem fairly benign, and it's only the Art site that throws a definite error. The only thing that seems consistent across all sites is the warning: "server does not support RFC 5746, see CVE-2009-3555".
Any other thoughts? I'm not sure a guest logon would help, but I can certainly pursue that line of action if you'd like to dig a little deeper.
Thanks in advance,
- Veda

Trying to access Netflixs and pick movie but I get "Unable to load this content at this time"

trying to access Netflixs and pick movie but I get "Unable to load this content at this time"

This earlier posting worked for me:
"This worked for me without having to reset my Apple TV universe: Press Menu and Down Arrow keys simultaneously for 6 seconds until the light flashes rapidly."
Thank you!

Loading custom content

Similar Messages

Maybe you are looking for