Loading data from an excel file to Oracle Tables

Hi Everyone,
Once again I will have to bring some data from some excel file, which I have already done and "know" how to do and I would like to confirm with you all something first.
What I shall do is the following:
From one excel workbook file which has a lot of info just in one spread sheet feed some tables with the data coming from it.
So what I have though is create mane name ranges (Define names on excel) as I need and work with them, but I will be facing with headers on the rows and columns. There is where I doubt if it will be possible. So far, I will not be able to modify the Excel’s file structure.
Something more or less like this:
Country1 Country 2
Sales1 9999999 9999999
Sales2 9999999 9999999
Sales3 9999999 9999999
Total123 9999999 9999999
Sales4 9999999 9999999
Sales5 9999999 9999999
Sales6 9999999 9999999
Total456 9999999 9999999
Best regards.
Jaison

Hi SH,
First of all, I do really appreciate your time, patience and guidance.
Ok, let me get this straight.
You will need to create a data server for each Excel Work book
That means that as I will just work with one excel sheet, I will just have one data server and within it, there will be the spread sheets (excel tabs) and therefore the different named ranges.
Each of your named ranges will be a data store beneath the data server which can be used as a source model in your ODI interfaces. Therefore if you have a single workbook with 12 sheets for the months, each covered by a single named range, you would have a single data server withe 12 data stores.
This means that I will have something like this:
+ “My_Workbook.xls” server name (Just one)
-     Spread sheet 1 (1 or several named ranges)
-     Spread sheet 2 (1 or several named ranges)
-     Spread sheet 3 (1 or several named ranges)
-     Spread sheet n (1 or several named ranges)
I do think that if my statement above is correct, I think I got the idea. Is it like that?
I have gotten another question; let’s say for example that in any spread sheet I will have three different named ranges. The difference between spread sheet and spread sheet will be the month within and of course the information. Would it be accurate to bring it like that? That means that so far for twelve month I will bring 36 named ranges.
Well I think I had explained myself. Please do not hesitate to contact me if any further detail is required.
Best regards.
J

Similar Messages

How to export the data from an excel file to Oracle database by using macro

Hi,
I want to export data from an excel file into Oracle database.There is one method that by creating the macros through excel we are able to do this.
can anybody please send me the code to create macros?
Thanks in advance.
Regards,
Surendra.V

There are several resources on the web, but you could start analyzing if this code fits your needs --> VBA Macro for Excel 2003 Export of Text File with Comma and Quote Delimiters.
~ Madrid

How to load data from MS Excel file

Hello All,
Please help me regarding:
how to load data/ insert records from MS Excel spreadsheet into Oracle table without converting that MS Excel file into CSV.
Thank You in advance.

Vivek More wrote:
how to load data/ insert records from MS Excel spreadsheet into Oracle table without converting that MS Excel file into CSV.Setup HS connectivity:
1. Create ODBC SYSTEM DSN using Microsift Excel driver(xls) and select your excel file as workbook.
2. Create file initXLS.ora in %ORACLE_HOME%\hs\admin directory contailing the following line:
HS_FDS_CONNECT_INFO = XLS3. Modify listener.ora file in %ORACLE_HOME%\network\admin directory and add the following lines to SID_LIST under SID_LIST_LISTENER
    (SID_DESC =
      (SID_NAME = XLS)
      (ORACLE_HOME = your-oracle-home)
      (PROGRAM = hsodbc)
    )4. Modify tnsnames.ora file in %ORACLE_HOME%\network\admin directory and add the following lines:
XLS =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SID = XLS)
    (HS=OK)
)5. Restart listener.
6. Create database link (public or private depending on your needs):
CREATE PUBLIC DATABASE LINK XLS USING 'XLS';7. Now you are all set. For example my file has:
NAME
SAM
JOEDefault sheet name "Sheet1$" is treated as table name (Since excel is case sensitive you need to use quoted name). First row is treated as column name. And select:
SQL> select * from "Sheet1$"@xls;
NAME
SAM
JOE
SQL> Now if you do not know excel sheet names you can issue (I renamed excel sheet Sheet1$ to Names$):
SQL> select table_name from all_tables@xls;
TABLE_NAME
Names$
Sheet2$
Sheet3$
SQL> select column_name from all_tab_columns@xls where table_name = 'Names$';
COLUMN_NAME
NAME
SQL> SY.

Need help in loading data from a csv file to a table in Oracle DB

Hi,
I am using sqlplus as a client to connect to the server.
I am trying to load data from a csv file from a client to a table in Oracle DB server.
I am trying to use the below command
" LOAD DATA INFILE 'test.csv' INTO TABLE testTable FIELDS TERMINATED BY ',' (test1,test2,testc3,testc4); "
But, I am encountered with the following error
"SP2-0042: unknown command "load data" - rest of line ignored."
Thanks in advance.
SB

Hey Frostmann,
That was a nice post....
I changed my mind to use an 'Insert into' statement from a shell script.
I created a DB table named test and I tried using the below shell script to insert a row in the table.
sqlplus test/test@test <<ENDOFSQL
INSERT INTO test VALUES('test1',123,'test2','test3');
exit
ENDOFSQL
A row is succesfully inserted into the table when I run the script manually, but it does not insert rows when a cron job is scheduled.
Could you please help me with this?
Thanks in advance.
SB

Importing data from Microsoft excel file to Oracle Database with Multiple Data Tables. Need expert advice and guidance

I posted a query on Importing data from Microsoft Excel to Oracle Database (Multiple Data Tables). I got some answer and reference from the forum.
I presented to my Oracle consultant and representative from Oracle Malaysia. They said impossible. I do not believe what they said. I do believe can be done.
Can someone help or direct me to an expert that can help me on this

e90f478a-c529-4c48-b189-51eebeaed477 wrote:
I posted a query on Importing data from Microsoft Excel to Oracle Database (Multiple Data Tables). I got some answer and reference from the forum.
I presented to my Oracle consultant and representative from Oracle Malaysia. They said impossible. I do not believe what they said. I do believe can be done.
Can someone help or direct me to an expert that can help me on this
We don't know the "query on Importing data from Microsoft Excel to Oracle Database (Multiple Data Tables). "
We don't know where you posted said query.
We don't know what "some answer and reference" you received "from the forum."
We don't know what it was that your "Oracle consultant and representative from Oracle Malaysia" said was "impossible".
So on what basis are we supposed to "help or direct" to "to an expert that can help "?

Need to load data from source .CSV files to oracle target database.

Hi,
This is the my scenario
I have .CSV files in ftp folder and need to load the data into target tables.
For that i need to create package and load the data into daily basis.
But some time .csv file name will vary daily basis.
can you any one suggest me???
Thanks in Advacne.
Zakeer

Dear Roy,
Thanks for your response
Now I am able to extract the .zip file OdiUnZip (file). and loading data into target this is chapping in static way
and my scenario is that some time i will get .zip files with different names with different .csv files
i need to dynamically find the new .zip file and extract it and load the data into target.
Please advice me..
Thanks in advance
Zakeer

Loading data from two flat files into one table

Hi All,
I want to load few fields from one file and few fields from another file and load the data into one table in the database.
For Ex: I have two flat files file1.csv and file2.csv and file1.csv containes 25 columns and file2.csv containes 12 columns, i want to load 20 columns from file1.csv and 7 columns from file2.csv into the table
how to combine the columns from both the files and load them into one table at a time?
Any help is appriciated
Thanks
R.G

Use external tables.
If using Oracle9 or higher connect both your csv with database as separate external tables and load the requited fields in new/requited table.

Is there away to load data from a text file to a table?

I have data stored in filename.txt and I want to load those data into a table on the front pannel of vi. How can I do that?

Se;
If the text file is already in an spreadsheet format, you can download the VI Read Strings From Spreadsheet File from my website:
http://www.jyestudio.com/lview.shtml
It is the suggested modification of the VI Read From Spreadsheet File that comes with LabVIEW, as stated in the diagram.
If the text file is not in spreadsheet format, then you need to write your own code to make the string table suitable for the table.
Regards;
Enrique
www.vartortech.com

Upload data from excel file to Oracle table

Dear All,
I have to upload data from excel file to Oracle table without using third party tools and without converting into CSV file.
Could you tell me please how can i do this using PLSQl or SQL Loader.
Thnaks in Advance..

Dear All,
I have to upload data from excel file to
Oracle table without using third party tools and
without converting into CSV file.
Could you tell me please how can i do this
using PLSQl or SQL Loader.
Thnaks in Advance..As billy mentioned using ODBC interface ,the same HS service which is a layer over using traditional ODBC to access non oracle database.Here is link you can hit and trial and come out here if you have any problem.
http://www.oracle-base.com/articles/9i/HSGenericConnectivity9i.php[pre]
Khurram

Error while loading data from a text file to a datastore

Hi all,
i am a starter in ODI. I am trying to load data from a text file into a datastore. I have put the file on a unix server whose location is defined in the topology manager. when i am trying to "view data" it is giving me error file does not exist at <location where i have put the file>. Please help me

Hi,
1. If your files are on a remote File System, you will need to copy one of your files to the machine ODI Designer is running on to allow ODI to retrieve the metadata information of the file.
2. In Topology create a Physical Schema, the directory you enter for Data and Work Schema should point at this local file.
3. Then define the File Datastore in ODI Designer. Enter a name, browse and select the file and fill in each filed of the Files tab.
* If its a Fixed file, click on the grid icon on the Columns tab to enter the columns and have Automatic Adjustment checked.
* If its a Delimited file, use the Reverse button on the Columns tab to reverse the columns.
* Right click on the File Datastore select View Data, if you can view data, that means the File Datastore has been defined correctly.
* If not, check each tab of the File Datastore to make sure everything is defined correctly and retry.
4. Once View Data is successful, you now change the directories (Data and Work Schema in Topology) to point at the remote File System. These directories must be accessible to the ODI Agent that will be used to run the transformations. The directory can be an absolute path (m:/public/data/files) or relative to the ODI Agent startup directory (../demo/files). It is strongly advised to use a UNC (independent from the execution location) for the path. When running the transformations with "no agent", the directory is relative to the directory where Oracle Data Integrator has been installed.
You need to have a agent process running at the system where your source file resides .
Then while running the odi interface choose that agent .
Thanks,
Sutirtha

I need how to load data from MS Excel(csv format) to NW Excel

Hi,
I am doing Migration project from SAP MS to NW Manually.
I need how to load data from MS excel (csv format) to NW excel .
For example 2008 budget data.
Could you please help me in this.
Thanks and Regards
Krishna

Hi,
You need to create a transformation file and a conversion file if required. First upload the excel (csv) file into BPC using Manage Data and Upload File option.
Create the transformation file (refer to the sap help on how to define a transformation file). You need to specify the mapping correctly and include all your application dimensions and map them to appropriate columns of the flat file.
Before running the import package, do validate the data in the flat file you uploaded into BPC with the transformation file you created.
Thanks,
Sreeni

How to retrieve data from an Excel file which is located on server

hi everybody,
                I am using SAP NWDS 2004s .
            I have done an application on how to export the table data into an Excel .
Now i want to get the data from an Excel file which is located in server and display that data which is in excel in a View for example a Sample view in Webdynpro .
In Sample view i took a uielement textview to display the data ....
can any one help how to procced further
Thanks in advance
Madhavi

Options to read Excel data to WebDynpro context
Reading Excel Sheet from Java without using any Framework
Reading Multiple Sheets of Excel Sheet from Java
Few Threads
How to Display the content of Excel file into Webdynpro Table
Is it possible to upload data from excel file(.xls)
Re: How to export the data as integer into excel sheet?
regards
   Vinod

How to load data from a flat file which is there in the application server

HI All,
how to load data from a flat file which is there in the application server..

Hi,
Firstly you will need to place the file(s) in the AL11 path. Then in your infopackage in "Extraction" tab you need to select "Application Server" option. Then you need to specify the path as well as the exact file you want to load by using the browsing button.
If your file name keeps changing on a daily basis i.e. name_ddmmyyyy.csv, then in the Extraction tab you have the option to write an ABAP routine that generates the file name. Here you will need to append sy-datum to "name" and then append ".csv" to generate complete filename.
Please let me know if this is helpful or if you need any more inputs.
Thanks & Regards,
Nishant Tatkar.

Reading data from an excel file

Hi,
I want to read data from the excel file and display it in
jsp page. Iam getting the following error:
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con =
DriverManager.getConnection("jdbc:odbc:mydsn","","");
Statement st = con.createStatement();
ResultSet rs = st.executeQuery("select * from [holidays$]");
Here i have created the dsn with the name "mydsn". I have the
following data in the mydsn.dsn file:
[ODBC]
DRIVER=Microsoft Excel Driver (*.xls)
UID=admin
UserCommitSync=Yes
Threads=3
SafeTransactions=0
ReadOnly=1
PageTimeout=5
MaxScanRows=8
MaxBufferSize=2048
FIL=excel 8.0
DriverId=790
DefaultDir=D:\WorkSpace\Projects\VINET\devl\webroot\jsp
DBQ=D:\WorkSpace\Projects\VINET\devl\webroot\jsp\list_of_holidays_2003.xls
thanks in advance
phani.

You might want to look at the POI project (an open source Jakarta sub-project) that allows you to create/modify/read excel files via Java code. That might be more flexible and easier than what you're currently trying to do.
Cheers

How to read data from the excel file using java code.

Hi to all,
I am using below code to getting the data from the excel file but I can't get the corresponding data from the specific file. can anyone give me the correct code to do that... I will waiting for your usefull reply......
advance thanks....
import java.io.*;
import java.sql.*;
    public class sample{
             public static void main(String[] args){
                  Connection connection = null;
                      try{
                           Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                           Connection con = DriverManager.getConnection( "jdbc:odbc:Mydsn","","" );
                           Statement st = con.createStatement();
                           ResultSet rs = st.executeQuery( "Select * from [Sheet1$]" );
                           System.out.println("sample:"+rs);
                              ResultSetMetaData rsmd = rs.getMetaData();
                              System.out.println("samplersd:"+rsmd);
                           int numberOfColumns = rsmd.getColumnCount();
                              System.out.println("numberOfColumns:"+numberOfColumns);
                               while (rs.next()) {
                                        System.out.println("sample1:"+rs);
                                        for (int i = 1; i <= numberOfColumns; i++) {
                                             if (i > 1) System.out.print(", ");
                                             String columnValue = rs.getString(i);
                                             System.out.print(columnValue);
                                        System.out.println("");
                                   st.close();
                                   con.close();
                                  } catch(Exception ex) {
                                       System.err.print("Exception: ");
                                       System.err.println(ex.getMessage());
                    }

1: What is the name of the excel sheet?
2: What is printed in this program? null ? anything?
error?Excel file name is "sample.xls" I set excel file connectivity in my JDBC driver(DSN). Here in my program I am not giving that excel file name. I am giving only that excel sheet name. that is followed
ResultSet rs = st.executeQuery( "Select * from [Sheet1$]" );The output of this program is given bellow.
sample:sun.jdbc.odbc.JdbcOdbcResultSet@1b67f74
samplersd:sun.jdbc.odbc.JdbcOdbcResultSetMetaData@530daa
numberOfColumns:2

Loading data from an excel file to Oracle Tables

Similar Messages

Maybe you are looking for