Loading data from APO-BW cube into DP planning area

Hello,
Please explain to me how to load data from an infocube within APO into the DP planning area. So far, I generated the data mart, created the update rules for the DP planning area (cube) and replicated data sources. The problem that I am having is that when I create the infopackage, there is no data targets on the data target tab. How can I get the data targets to display? All the other actions appear to be set up correctly (confirmed by BW experts). Can data be loaded from an APO-BW cube directly to the DP planning area cube?
Thanks

Hi James,
Loading of data from an InfoCube to a Planning Area is done using transaction /SAPAPO/TSCUBE (program /SAPAPO/RTSINPUT_CUBE). You just specify the InfoCube, target Planning Area, Selection condition, Infocube Key Figure to PA KF mapping, etc).
Have you tried this transaction already?
Hope this helps.

Similar Messages

Unable to load data from DSO to Cube

Good morning all,
I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
Thank you so much!

Hi BI User,
For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
So..first do the initialization and perform delta upload into the cube.
Regards,
Subhashini.

ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE

Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik Shah

Dear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain.

DTP load data from DSO to CUBE can't debug

Hi,all expert.
I met a problem yestoday.
When I load data from datasource to DSO,and debug the start routine,it was ok.But when I load data from DSO to CUBE,and debug the routine,it got an error like this:
inconsistent input parameter(parameter:<unknow>,value <unknown>)
message no: RS_EXCEPTION 101.
I don't know why,PLZ help me,thank you very much.

Hi,
An alternative way to do this is to have a small code for infinite loop in your start routine. And when you start the load goto SM50 and debug the process which is executing the load, from there you can close the infinite loop and carry on with the debugging. Please let me know if you require further information.
Thanks,
Arminder

Error while loading data from ODS to CUBE.

Hi friends,
When l am loading data from ODS to Cube with help of data mart, I am getting error in QA system , IN DM system ,every thing went well.IF i see the detail tab in monitor under Processing .
Its is showing like this .
Transfer Rules : Missing Massage.
Update PSA : missing massage.
Processing end : missing message.
I have checked the coding in update rules, everything is ok.
Plz any inputs.
hari
Message was edited by:
hari reddy

Might means that IDocs flow is not defined properly in your QA system for myself-SourceSystem.
Regards,
Vitaliy

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Job cancelled While loading data from DSO to CUBE using DTP

Hi All,
while i am loading data frm DSO to CUBE the job load is getting cancelled.
in the job overview i got the following messages
SYST: Date 00/01/0000 not expected.
Job cancelled after system exception ERROR_MESSAGE
wt can be the reason for this error as i have successfully loaded data into 2 layers of DSO before loading the data into the CUBE

hi,
Are u loading the flat file to DSO?
then check the data in the PSA in the date field and replace with the correct date.
i think u r using write optimised DSO which is similar to PSA it will take all the data from PSA to DSO.
so clear the data in PSA and then load to DSO and then to CUBE.
If u dont need a date field in CUBE then remove the mapping in transformation in cube and activate and make DTP activate and trigger it it will work.

How to load data from a virtual cube with services

Hello all,
we have set up a virtual cube with service and create a BEx report to get the data from an external database. That works fine. The question is now:
Is it some how possible to "load" the data from this virtual cube with service (I know that there are not really data...) into an other InfoCube?
If that is possible, can you please give my some guidance how to set up this scenario.
Thanks in advance
Jürgen

Hi:
I don't have system before me, so try this.
I know it works for Remote Cube.
Right Click on the Cube and Select Generate Export Data Source.
If you can do this successfully, then go to Source Systems tab and select the BW. Here, Right CLick on select Replicate DataSources.
Next, go to InfoSOurces, click on Refresh. Copy the name of Virtual Cube and add 8 as a prefix and search for the infosource.
If you can see it, that means, you can load data from this cube to anywhere you want, just like you do to ODS.
ELSE.
Try and see if you can create an InfoSpoke in Virtual Cube. Tran - RSBO.
Here, you can load to a database table and then, from this table, you can create datasource, etc.
ELSE.
Create query and save it as CSV file and load it anywhere you want. This is more difficult.
Good luck
Ram Chamarthy

How to load data from PSA to CUBE & DSO at a time using DTP in BI 7 ?

HI all,
I am new to BI 7 . How to load the data at same time to DSO & INFO CUBE using DTP.
Please provide me steps to load & plz specify which update mode I have to use ( FULL OR DELTA ) which one is best.
Plz Suggest me.
Thanks & Regards,
Kiran m.
Message was edited by:
kiran manyam

Below are the basic steps which we follow in any BI 2004S system:
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
If you are loading data from one one data target to other, no need to use PSA, you can directly execute DTP in that case.
Data Source -> Transformation (IP/DTP) -> Data Target1 -> DTP ->Data Target 2
Use the below link for detailed example:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
Infosources are no more mandatory with BI 7.0, below is the link to scenarios where we use infosources:
http://help.sap.com/saphelp_nw04s/helpdata/en/44/0243dd8ae1603ae10000000a1553f6/content.htm
Full or delta depends on your requirement...
chk the below thread to know better
difference between the various loads
hope it helps
Message was edited by:
sriram viswanathan

Error when loading data from DSO to Cube

Hi,
After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
Has anyone experienced a similar problem or have some guidelines on how to resolve it?
Kind regards,
Fredrik

Hej Martin,
Tack!
Problem solved
//Fredrik

Dump when loading Data from DSO to Cube

Hi,
i get a short dump DBIF_REPO_PART_NOT_FOUND when trying to load data from a dso to a cube. From DSO to DSO it works fine.
any idea`s?
thx!
Dominik

the Dump occurs in the last step of the last data pakage in the DTP Monitor.
I checked the OSS note, but i don´t know how to check the kernel version.
Now i used another DSO for testing and i got another Dump with a different name.
After that i logged in again and it works with my test DSO data...
But still not working with the original one...
@Kazmi: What detaisl u mean exactly?

Help needed with loading data from ODS to cube

Hi
I am loading data from an ODS to a cube in QA. The update rules are active and definition seems right. I am getting the following error, in the update rules.
"Error in the unit conversion. Error 110 occurred"
Help.
Thanks.

Hi Chintai,
You can see the record number where the error occured in the monitor (RSMO) for this data load > goto the details tab and open up the Processing area (+ sign). Try it out...
Also about ignoring the error record and uploading the rest, this is done if you have set Error Handling in your InfoPackage (Update tab), but this would have to be done before the load starts, not after the error happens.
Hope this helps...
And since you thanked me twice, also please see here:-) https://www.sdn.sap.com/irj/sdn?rid=/webcontent/uuid/7201c12f-0701-0010-f2a6-de5f8ea81a9e [original link is broken]

How to load the data from flat file ( ex excel ) to Planning area directly

Hi all ,
How can i load thedata fro m flat file directly to Planning area .
PLease help me in this.
Regards,
Chandu .

download one key figure data from planning book ( interactive damand plan) and made some changes and need to upload the data back to same planning book
But, may I know why you are thinking of downloading, changing and uploading for just changing the figures for a particular key figure. You can do it in the planning book itself.
However, not all the key-figures can be changed. But, what type of key-figure you are speaking here? Is it like 'Forecast' for which the value is based on other key-figures, or is like a key-figure where some manual adjustments are to be done--so that it can be manually edited? However, in both the cases, the data can be changed in the planning book only. In first case, you can change the values of dependant key-figures and in the second case, you can change the key-figures directly.
And please note that you can change the values of the key-figures only at the detailed level. So, after loading the data in the book, use drill-down option, maintain the data at the detailed level, change the figures, and automatically, this gets reflected at the higher level.
In case you are unable to change the values, go to the 'Design' mode of the book, right-click your key-figure, under "Selected Rows", uncheck "Output Only" option. In case you are unable to see that option, then you are not authorised to change that. See if you can change the authorisations by going to the "Data View" tab in planning book configuration (/n/sapapo/sdp8b), and change the value of Status to 3.
Hope your query is answered with different solutions offered by many of the sdn colleagues here.
Regards,
Guru Charan.

Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3

Hi All,
We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
first time i have loaded the data it is full update.
Second time i init the data load. I pulled the delta from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
I tried compression but still it did not worked.
Can some has face this kind
Thanks

Yaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a>

Issue loading data from PSA to Cube

Hi Gurus:
I have a strange issue. My DELTA load to ODS from R/3 come thru fine. However, the load fails while moving
from ODS to the cube. The error is in 'Fiscal Year/Period'. It is a straight 1:1 map in update rules. If I bring the
data just to PSA there is no error. But when the data moves from PSA to cube, one record in each of the 2
packages the valiue of Fiscal Year/Period changes from "012/2009" to "015/2009".
Any idea why this might be happeing and suggestions on How can I move this data to cube?
Thanks in advance and a very happy New Year!
Best.....PBSW

Are you using or copying Busines Content in your start routines?
In the SD data extractors, the Fiscal Year/Period was provided WITHOUT a Fiscal Variant.
In the Start Routine, the Fiscal Variant was hard coded to "K4" (I think).
If you are using the code and a Fiscal Calendar other than the Hard coded one, you might get this type of error.
If so, consider setting the Fiscal Variant as a constant in the update rules.
Good Luck,
John Hawk

Loading data from APO-BW cube into DP planning area

Similar Messages

Maybe you are looking for