Loading Data into existing Data Targets from 2 DataSources

Hello:
I want to report on COPA data. I am currently reporting on one Operating concern E.g 1_CO_PA_0001. Now i want to report on the Operating concern E.g 1_CO_PA_0004. For this i created a new DataSource. Replicated it into BW.
My question is can i link the newly created COPA datasource (1_CO_PA_0004) with the Data Targets (ODS or Cube) of the of 1_CO_PA_0001 and load data? Will get any errors? or is this a big blunder i am doing?
Can any one explain?
Regards
Lalitha

If you are using Calc manager rules then have a look at the CalcMgrCmdLineLauncher.cmd utility -http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin/ch06s09s05.html
If it is EAS rules then you could use the CmdLnLauncher utility to automate running rules.
or you could create calc scripts and automate using Maxl.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Can we send the data into different data target from single datasource how

Hai
can we send the data into different data target from single datasource how ?

Hi,
Create the transformation for each target and connect through DTP if you are in BI 7.0
If it is BW 3.5 create transfer rules and load it Info source and then different update rules for different targets then load it using IP.
If you are speaking about loading data from R3 data source to multiple data sources in BI
Then follow the below step.
1)create init IP's and run the IP's with different selection to different DSO(With same selection it is not possible).
2)Then you will have different delta queues for the same data source in RSA7
3)Your delta loads will run fine to different data sources from same DS in R3.
Hope this helps
Regards,
Venkatesh

Error encountered while loading data into an Essbase cube from oracle DB

Hi All,
I am trying to load data into an Essbase cube from Oracle db. Essbase is installed in an 64 bit HP-UX machine and oracle database on HP -UX 11.23 B server. While performing the above I am getting the below error messages:
K/INFO - 1021013 - ODBC Layer Error: [08001] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory].
OK/INFO - 1021014 - ODBC Layer Error: Native Error code [1034] .
ERROR - 1021001 - Failed to Establish Connection With SQL Database Server. See log for more information.
Can you please help me out in identifying the issue, as why it could have occured , because of network problem or is there anything related to databse?
Regards,
Priya

The error is related to Oracle, I would check that it is all up and running
ORA-01034: ORACLE not available
Cheers
John
http://john-goodwin.blogspot.com/

Loading data into existing table

Hi I have tried to load data into a large table from a csv file but am not getting any success. I have this control file
LOAD DATA
INFILE 'Book1.xls'
BADFILE 'p_sum_bad.txt'
DISCARDFILE 'p_sum_dis.txt'
APPEND
INTO TABLE p_sum
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
SUMMARY_LEVEL ,
PERIOD_START_TIME ,
BUSY_HOUR ,
OMC ,
INT_ID ,
BTS_ID ,
BTS_INT_ID ,
CELL_GROUP ,
HO_PERIOD_DURATION ,
POWER_PERIOD_DURATION ,
MSC_I_SUCC_HO ,
MSC_I_TCH_TCH ,
MSC_I_SDCCH_TCH ,
MSC_I_SDCCH ,
MSC_I_TCH_TCH_AT ,
MSC_I_SDCCH_TCH_AT ,
MSC_I_SDCCH_AT ,
MSC_I_FAIL_LACK ,
MSC_I_FAIL_CONN ,
MSC_I_FAIL_BSS ,
MSC_I_END_OF_HO ,
MSC_O_SUCC_HO ,
The data is:
2     3-Nov-06               1000033     9     8092220          1440     1440     5411     5374     7     30     5941
2     3-Nov-06               1000033     10     1392190          1440     1440     0     0     0     0     0
2     3-Nov-06               2000413     3     2127446          1440     1440     80     80     0     0     83
2     3-Nov-06               2000413     4     2021248          1140     1440     0     0     0     0     0
2     3-Nov-06               2000413     5     2021252          1080     1440     1     1     0     0     1
2     3-Nov-06               2000413     6     2130163          1440     1440     2200     2193     2     5     2224
2     3-Nov-06               2000413     7     6205155          1020     1440     0     0     0     0     0
2     3-Nov-06               2000413     8     6200768          900     1440     30     30     0     0     31
2     3-Nov-06               2000413     10     2111877          1440     1440     0     0     0     0     0
2     3-Nov-06               1000033     18     1076419          1440     1440     75     73     0     2     79
2     3-Nov-06               1000033     19     8089060          1440     1440     0     0     0     0     0
but when I try to load the data, I get:
Column Name Position Len Term Encl Datatype
SUMMARY_LEVEL FIRST * , O(") CHARACTER
PERIOD_START_TIME NEXT * , O(") CHARACTER
Record 51: Rejected - Error on table OMC.P_SUM_BTS_HO_POWER, column SUMMARY_LEVEL.
ORA-01722: invalid number
I believe the data being loaded has to be NUMBER. Can anyone adivse what do I need to change to load the data. Thanks

Justin,
Tried that, no luck:
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table P_SUM, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
SUMMARY_LEVEL FIRST * WHT O(") CHARACTER
PERIOD_START_TIME NEXT * WHT O(") CHARACTER
BUSY_HOUR NEXT * WHT O(") CHARACTER
OMC NEXT * WHT O(") CHARACTER
INT_ID NEXT * WHT O(") CHARACTER
BTS_ID NEXT * WHT O(") CHARACTER
BTS_INT_ID NEXT * WHT O(") CHARACTER
CELL_GROUP NEXT * WHT O(") CHARACTER
Record 51: Rejected - Error on table OMC.P_SUM_BTS_HO_POWER, column SUMMARY_LEVEL.
ORA-01722: invalid number
Any other sugesstion

Pulling data into BW on HANA from MFG Pro application

Hi,
I have a requirement to pull data into BW on HANA from MFG PRO system that runs on Progress database. Which of the two techniques - DB Connect or UD Connect can be used. Do these methods (DB Connect and UD Connect) support delta loads in this scenario ?
Please advise. Thanks.

Hi Saurabh Diwakar,
Even I have not used UD connect so far, so my knoweldge is also limited.But you can get lot of documenation about UD connect since is s very old feature.
UD connect support delta you can verify it in the SAP help document
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/00153831035167e10000000a1553f6/frameset.htm
Thanks & Regards
A.Dinesh

I am unable to add Data element into existing Data Type

Hi Experts,
I am unable to add Data element into existing Data Type, It shows disable mode, suggest me this..
Thanks

Yep got it...
Edited by: Manoj on Aug 20, 2008 1:09 AM

VF11 - Default system date into billing date

VF11 - Default system date into billing date
I want to Default system date into billing date
and not allow any other date.
I tried some badi and user exit but I didn't get
any sign from my break point.
Please Help
Thanks Kobi

hi
good
in this case you have to change the standard program to the z* program and you can give the today date in the parameter statement as a constant value.
standrd program name->SAPMV60A
screen field -RV60A-FKDAT
thanks
mrutyun^

How to load data into 3 different target tables usin BODS ?

Hello Friends,
I have 5 different source tables with same field definitions, Now I want to load all the records into three/four different target tables (Flat file, SQL Server, XML, and Oracle ) Could anyone please tell me how to do this task ?
Thanks in Advance,
Bheem.

Hello Bheem,
You can create separated dataflow for each target as suggested by Bala, this is a good choice when evaluating you scenario.
If you put all targets in the same dataflow you may experience problems if one of them is down (as you have different servers as targets).
BODS will send the data simultaneously to all targets and when one fails, the load will be break and you may have the tables not sinc anyways (if you plan to use a single dataflow to avoid this situation, it won't do it).
So the best option is to create separated dataflow and put inside another one so you can run a singe dataflow that will call each one of the target and if onw fails the other will complete accordingly.
Then if you put them inside a error trapping, you may even make your dataflow to retry the load prior abend the job.
Think about cascading your dataflows and let the leaf level simple as it can be so it will be easier to schedule and debug your process.
Pay attention to datatypes and other conversions you might need when working with more than one source/target.
Regards,

Error while loading data into clob data type.

Hi,
I have created interface to load data from oracle table into oracle table.In target table we have attribute with clob data type. while loading data into clob field ODI gave below error. I use odi 10.1.3.6.0
java.lang.NumberFormatException: For input string: "4294967295"
     at java.lang.NumberFormatException.forInputString(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
     at java.lang.Integer.parseInt(Unknown Source)
Let me know if anyone come across and resolved this kind of issue.
Thanks much,
Nishit Gajjar

Mr. Gajjar,
You didnt mention what KMs you are using ?
have a read of
Re: Facing issues while using BLOB
and
Load BLOB column in Oracle to Image column in MS SQL Server
Try again.
And can you please mark the Correct/Helpful points to the answers too.
Edited by: actdi on Jan 10, 2012 10:45 AM

Importing Data into Sql Server 2012 from Excel Data

Hi,
I got errors like this when i am doing import data into sql server from excel Data. Can you please help us?
- Executing (Error)
Messages
Error 0xc020901c: Data Flow Task 1: There was an error with Source - demotable$.Outputs[Excel Source Output].Columns[Comment] on Source - demotable$.Outputs[Excel Source Output]. The column status returned was: "Text was truncated or one
or more characters had no match in the target code page.".
(SQL Server Import and Export Wizard)
Error 0xc020902a: Data Flow Task 1: The "Source - demotable$.Outputs[Excel Source Output].Columns[Comment]" failed because truncation occurred, and the truncation row disposition on "Source - demotable$.Outputs[Excel Source Output].Columns[Comment]"
specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - demotable$ returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)

Are you attempting to import into a newly made table or into an existing table? It looks like it's trying to insert data where it cannot be inserted (invalid column or lack of data size in your column).
Try the following:
1). In your excel sheet, highlight the whole sheet and make sure the cells are in 'text' form and try re-importing
2). save the document as ms dos TEXT and import as a text document.
3). double check your columns are correct for the data, for example if you have a column that has a string of 100 characters and your column is 'NvarChar(90)' - that might cause the error? Or just correct data type in your column
3). If that doesn't work and you're inserting into a new table, try importing it as string first and writing a query to insert columns that should be float/integer or whatever. You may want to convert float texts to a 'bigint' first rather than string
> float as that can cause problems if I remember correctly.

Injecting data into a star schema from a flat staging table

I'm trying to work out a best approach for getting data from a very flat staging table and then loading it into a star schema - I take a row from a table with for example 50 different attributes about a person and then load these into a host of different tables, including linking tables.
One of the attibutes in the staging table will be an instruction to either insert the person and their new data, or update a person and some component of their data or maybe even to terminate a persons records.
I plan to use PL/SQL but I'm not sure on the best approach.
The staging table data will be loaded every 10 minutes and will contain about 300 updates.
I'm not sure if I should just select the staging records into a cursor then insert into the various tables?
Has anyone got any working examples based on a similar experience?
I can provide a working example if required.

The database has some elements that make SQL a tad harder to use?
For example:
CREATE TABLE staging
(person_id NUMBER(10) NOT NULL ,
title VARCHAR2(15) NULL ,
initials VARCHAR2(5) NULL ,
forename VARCHAR2(30) NULL ,
middle_name VARCHAR2(30) NULL ,
surname VARCHAR2(50) NULL,
dial_number VARCHAR2(30) NULL,
Is_Contactable CHAR(1) NULL);
INSERT INTO staging
(person_id, title, initials, forename, middle_name, surname, dial_number)
VALUES ('12345', 'Mr', 'NULL', 'Joe', NULL, 'Bloggs', '0117512345','Y')
CREATE TABLE person
(person_id NUMBER(10) NOT NULL ,
title VARCHAR2(15) NULL ,
initials VARCHAR2(5) NULL ,
forename VARCHAR2(30) NULL ,
middle_name VARCHAR2(30) NULL ,
surname VARCHAR2(50) NULL);
CREATE UNIQUE INDEX XPKPerson ON Person
(Person_ID ASC);
ALTER TABLE Person
ADD CONSTRAINT XPKPerson PRIMARY KEY (Person_ID);
CREATE TABLE person_comm
(person_id NUMBER(10) NOT NULL ,
comm_type_id NUMBER(10) NOT NULL ,
comm_id NUMBER(10) NOT NULL );
CREATE UNIQUE INDEX XPKPerson_Comm ON Person_Comm
(Person_ID ASC,Comm_Type_ID ASC,Comm_ID ASC);
ALTER TABLE Person_Comm
ADD CONSTRAINT XPKPerson_Comm PRIMARY KEY (Person_ID,Comm_Type_ID,Comm_ID);
CREATE TABLE person_comm_preference
(person_id NUMBER(10) NOT NULL ,
comm_type_id NUMBER(10) NOT NULL
Is_Contactable CHAR(1) NULL);
CREATE UNIQUE INDEX XPKPerson_Comm_Preference ON Person_Comm_Preference
(Person_ID ASC,Comm_Type_ID ASC);
ALTER TABLE Person_Comm_Preference
ADD CONSTRAINT XPKPerson_Comm_Preference PRIMARY KEY (Person_ID,Comm_Type_ID);
CREATE TABLE comm_type
comm_type_id NUMBER(10) NOT NULL ,
NAME VARCHAR2(25) NULL ,
description VARCHAR2(100) NULL ,
comm_table_name VARCHAR2(50) NULL);
CREATE UNIQUE INDEX XPKComm_Type ON Comm_Type
(Comm_Type_ID ASC);
ALTER TABLE Comm_Type
ADD CONSTRAINT XPKComm_Type PRIMARY KEY (Comm_Type_ID);
insert into comm_type (comm_type_id, NAME, description, comm_table_name) values ('23456','HOME PHONE','Home Phone Number','PHONE');
CREATE TABLE phone
(phone_id NUMBER(10) NOT NULL ,
dial_number VARCHAR2(30) NULL);
Take the record from Staging then update:
'person'
'Person_Comm_Preference' Based on a comm_type of 'HOME_PHONE'
'person_comm' Derived from 'Person' and 'Person_Comm_Preference'
Then update 'Phone' with the number based on a link derived from 'Phone' which is made up of Person_Comm Primary_Key where 'Comm_ID' (part of that composite key)
relates to the Phone table Primary_Key which is Phone_ID.
Does you head hurt as much as mine?

Sql/Plsql code to export data into a temporary table from a text file

Dear all,
I need to create a temporary table getting data from a text file. I am very new to data loading could you please help me how to read the text file in to a temporary table.
i have text file like as below:
order items : books Purchasing
start date:
8-11-09
Notes: Books are selling from aug10 to aug 25
Action performed
Time
Verified By
sold out from shop, sold out date:_________
1.
physics _______ book sold to ravi
2.
social _______ book this is a good book
sold to kiran
aug10th
ronald
3.
maths book to sal
4.
english book__________ this was a newbook
to raj
jak
return to shop, return date:____________
1.
maths book return by:_____________ Verify book
aug11th
john
2.
story book by:_________ checked
aug14th
Now i need to create a temporary table and insert the data into the table from this text file.
Now i need to create a temporary table named as books_order with 5columns(order,Status,Action_Performed,Time,Verified_By) like as below:
Order     status     Action_Performed     Time     Verified_By
books Purchasing     sold     physics _______ book sold to ravi     _______     _________
books Purchasing     sold     social _______ book this is a good book sold to kiran aug10th     ronald
books Purchasing sold     maths book to sal     _____     __________
books Purchasing     sold     english book__________ this was a newbook to raj __________     jak
books Purchasing return     maths book return by:_____________ Verify book aug11th     john
books Purchasing     return     story book by:_________ checked aug14th     _________
Thanks in advance.

Isn't school work marvelous?
Create an external table.
http://www.morganslibrary.org/reference/externaltab.html
Getting the data into a temporary table may make sense in SQL Server ... but not in Oracle.

Is there a way to import data into existing contacts in Address Book?

I want to import data from a .csv (for example) into existing address book entries. It would have to recognize and match the name, then recognize the new data and enter it.
Is that possible?
(Now that I think about it, maybe this can be done with Address Book's existing conflict resolution method (that compares similar entries and asks which to keep)…?)

I have answered my own question. I exported the data from a layout in FileMaker Pro containing the required fields as tab separated text. That produced a .tab file that Contacts wanted nothing to do with. However, when I changed the .tab in the file name to .txt, Contacts accepted it as a file to import (File/Import). I then identified the field in Contacts in which the data in each field in the txt file was to be placed and in it went! The trick was changing .tab to .txt in the name of the file exported by FileMaker Pro.

Populate data into standard component alv from Zcomponent popup data selected

HI All
I have to call Zcomponent in standard component and need to pass value into Zcomponent (table) and from Zcomponent select row and pass back to standard component.
Steps
1) Created Zcomponent with interface node
2) Enhanced the standard component and create used components for Zcomponent and make it available at component controllers and view controllers.
When I click on Button in standard component I am calling this Zcomponent as popup window.
My problem I when I select data in Zcomponent I need to populate the data in ALV of standard component.
I thought of 2 methods to take my selected back and populate data into standard component ALV.
1) Create event: EVENT1 and   Interface method Method1 and link to EVENT1
So that I can raise this event in Zcomponent and populate the data into standard component ALV
Problem: Under events interface checkbox is visible, when I select my enhancement implementation the interface checkbox not visible under events tab?.
2) Create Interface method Method1 write logic to populate data into standard component ALV
But here to when I select my enhancement implementation the interface checkbox not visible under?
Can anyone please help me why interface checkbox is not visible or any better solution to populate the data back to standard component alv?
Thanks
Gopal

Hi Gopal,
You can achieve your requirement by using EVENTS as below
Create an event SET_DATA in component controller of zcomponent and mark it as interface and also include the parameters like context_element( type ref to if_wd_context_element), etc as below
Now, create an action for the event onLeadSelect of your zcomp Table and write the below code
                 DATA lo_ctx_element TYPE REF TO if_wd_context_element.
               "get the selected row
                 lo_ctx_element = wdevent->get_context_element( name =
                    'NEW_ROW_ELEMENT' ).
               "Raise the event with parameter
               wd_comp_controller->fire_set_data_evt( context_element = lo_ctx_element ).
Use the Zcomponent in your standard component and make available in std. view's properties
Create an event handler SET_DATA method for your Zcomp's event as below
Now, inside this method, you get the parameter CONTEXT_ELEMENT and get the data from this context element as below
               context_element->get_attrribute( ) or
               context_element->get_static_attributes( )
You can populate the data into standard component based on the obtained value from Zcomponent.
Hope this helps you.
Regards,
Rama

Insert data into a database table from a string

Hi,
I am need to insert data into a table from the text file. I pull the data into an internal table using GUI_UPLoad. I read the data into an internal table and concatenate data into a string. I need to do this because the structure of the table is dynamic. it is used to upload a series of tables each with different structure, But the data is stored in the string v_tabledata. How to do that.
after uploading the data from the textt file into a table
oop at i_final.
v_tabname = i_final-table_name.
concatenate i_final-table_rec1 i_final-table_rec2 i_final-table_rec3
i_final-table_rec4 i_final-table_rec5 into v_tabledata.
from 'v_table data' i need to upload the data into a table and the structue of the table is known dynamically. Any thoughts using field symbols?
Thanks,
VG

Let me see if I've understood your issue
You have a file to be uploaded into an internal table but this file has many different layouts and then you don't know how to link these fields with the internal table...is it your issue?
Then you've read the internal table, you've sent it to a string divided by space or something else and then are you trying to read this string to send it to a table?
We could read the standard tables which maintain the program names, table names etc... (DD* tables, as the DD03L table) and then create some rules...
We could create a parameter table to read your file/table dynamically...
Please, try to rewrite in other words your problem...because there are a lot of ways to achieve your issue...
Alexandre Mendes

Loading Data into existing Data Targets from 2 DataSources

Similar Messages

Maybe you are looking for