Loading data - NO_DBROUTID_FOUND

Hello,
I am actually trying to load data to an Infoprovider (Cubde or DTP), but unfortunatelly the system raises the follow exception:
A RAISE statement in the program "SAPLRSDGUTILITIES" raised the exceptioz condition "NO_DBROUTID_FOUND".
RAISE_EXCEPTION" " "
SAPLRSDGUTILITIES" or "LRSDGUTILITIESU03"
RSDG_ROUTINES_PROGRAM_GET"
I have check for simillar error in the OSS note, but I have found dothing.
Any idea what could be?
Best regards
Sérgio Pinto

Hi,
Chk this link
SID Generation Error in DSO used in Process Chain
rgds,

Similar Messages

Loading data one year at a time

Hi,
We have a situation where we need to load data one year at a time. I saw this done a few years ago but do not remember the details.
What I am thinking is that we could initially run a full load with the following parameters:
$$ANALYSIS_START: 1/1/2006
$$ANALYSIS_START_WID: 1/1/2006
$$INITIAL_EXTRACT_DATE: 1/1/2006
$$ANALYSIS_END_WID: 1/1/2006
And this should give us one year. What I am not sure about is how to load each subsequent year???
Regards

Is the issue a performance issue (ETLs running for too long)? The problem is that if you do Year by year..and you want to do a "incremental" load for each year, that would be even more of a load..since you are not allowing for BULK load (where the tables get truncated). Either you can truncate and do BULK or incrmental..which may be an even heavier load. I think you are assuming that this approach will somehow help you from a hardware limitation standpoint..do you know for sure that it will?
If you really do want to do it, as I mentioned, you can edit the INITIAL and END parameters. It would help if you clarify the Hardware limitation...I think there are better ways to handle this than to do what you are doing.

Input ready query is not showing loaded data in the cube

Dear Experts,
In Input ready query we have problem that it is not showing the values which was not entered by throught hat query. Is any settings in input ready query that we can do to populate the loaded data on the cube as well as data entered through Input ready query itself.
Thanks,
Gopi R

Hi,
input ready queries always should display most recent data (i.e. all green and the yellow request). So you can check the status of the requests in the real-time InfoCube. There should exist only green requests and maybe at most one yellow request.
In addition you can try to delete the OLAP cache for the plan buffer query: Use RSRCACHE to do this. The technical names of the plan buffer query can be found as follows:
1. InfoCube\!!1InfoCube, e.g. ZTSC0T003/!!1ZTSC0T003 if ZTSC0T003 is the technical name of the InfoCube
2. MPRO\!!1MPRO, e.g. ZTSC0M002/!!1ZTSC0M002 if ZTSC0M002 is the technical name of the multiprovider
If the input ready query is defined on an aggregation level using a real-time InfoCube, the first case is relevant; if the aggregation level is defined on a multiprovider the second case is relevant. If the input-ready query is defined on a multiprovider containing aggregation levels again the first case is relevant (find the real-time InfoCubes used in the aggregation level).
Regards,
Gregor

Can we load data using .xls in user define format(without using default template)

Hi All,
I'm new bee to FDM. Part of HFM support i use FDM to load flatfile data. Just has a bit more knowledge than end user.
Requirement is that i need to load data from MS excel to Planning application via FDM.
Previously application is in Excel(Macro driven) and upstream(data) is also in Excel(multi tab).
As of my knowledge data can be loaded from .csv file(Excel save as CSV) with single tab.
Could you please let me know possibilities to load data from .xls(.xlsx) to FDM.
Thanks in advance.

If you want to load data using Excel, utilising FDM's out-of-the-box functionality you will have to use one of the templates supplied i.e. Excel Trial Balance or Excel Multi-load template.

Can we load data in chunks using data pump ?

We are loading data using data pump. So I want to clear my understanding.
Please correct me if I am wrong on my understandings -
ODI will fetch all data from source (whether it is INIT or CDC ) in one go and unload into staging area.
If it is true, will performance hamper in case very huge data (50 million records at source) at source as ODI tries to load entire data in one go. I believe it will give better performance if we load in chunks using data pump.
Please confirm and correct.
Also I would like to know how can we configure chunk load using data-pump.
Thanks in Advance.
Regards,
Dinesh.

You may consider usingLKM Oracle to Oracle (datapump)
http://docs.oracle.com/cd/E28280_01/integrate.1111/e12644/oracle_db.htm#r15c1-t2
In 11g ODI reads from source and write to target in parallel. This is the case where you specify select query in source command and insert/update query in the target command. At source side Odi reads records from source and add them to a data queue. At target side a parallel thread reads data from the data queue and writes to the target. So the overall performance would be the slower of the read or write process.
Thanks,

Can not load data into the ods.

When I was trying to load data into BW3.5 from R3 system, I am getting this message
"For InfoSource ZSD_A507_011, there is no Hierarchies for master data in source system R3PCLNT300
" any idea. There is no hierarchies for this.

Hello Mat,
What are you trying to load??
If the data source is a hierarchy datasource??
just check this thread
There are no hierarchies for this InfoSource in source system
Thanks
Ajeet

Can't load data through smart view (ad hoc analysis)

Hi,
There is EPM application where I want to give ability to planners to load data through smart view (ad hoc analysis). In Shared Services there are four options in
EssbaseCluster-1: Administrator, Create/Delete Application, Server Access, Provisioning Manager. Only Administrator can submit data in smart view (ad-hoc analysis). But I don't want to grant Essbase administrator to planners, I'm just interested to give them ability to load data through ad-hoc analysis. Please suggest!

I take that you refreshed the Planning security, If not refresh the security of those users. Managing Security Filters
Check in EAS whether those filters are created with "Write" permissions.
Regards
Celvin
http://www.orahyplabs.com

Can we load data for all levels in ASO?

Hi All,
Im creating cube in ASO
can i load data for all levels in ASO
we can load data for all Levels In BSO but in ASO i need confirmation????
and one more
wat is the consider all levels option in ASO is used for ? wat is the purpose?
Can any one help ,it would be appriciate.
Thanks

In an ASO cube you can only load to level zero
The consider all levels if used for aggregation hints. It allows you to tell the aggregation optimizer to look at all levels when deciding if aggregation needs to be done on the dimension

Can we load data for all levels in ASO cube

Hi All,
Can we load data for all levels of members in ASO cube in 9.3.1.
Regards

Yes you can load data for all levels in an ASO cube in any version HOWEVER, none of the upper level data in any cube will be there when you look for it. You will get a warning message in the load because ASO cubes don't store data at upper levels. It is the same as loading data into dynamic calc members in BSO cube. It will do the load without compalints, but there will be no data there (At least you get the warning in ASO)

Not able to load data in tables with correct way

Hi
i made one trigger to load data in view and tables.
CODE FOR TRIGGER>>>>
Object Details Code Errors SQL
CREATE OR REPLACE TRIGGER "WELL_GENERATOR_TRIGGER_1"
INSTEAD OF INSERT ON VIEW_WELL_GENERATOR_FORM
FOR EACH ROW
DECLARE
rowcnt number;
BEGIN
INSERT INTO facility (FAC_PK) VALUES (:NEW.FAC_PK);
SELECT COUNT(*) INTO rowcnt FROM WELL WHERE WEL_PK = :NEW.WEL_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL (WEL_PK,SITE,FAC_FK) VALUES(:NEW.WEL_PK,:NEW.SITE,:NEW.FAC_PK);
ELSE
UPDATE WELL SET WELL.SITE = :NEW.SITE,
WELL.FAC_FK = :NEW.FAC_PK
WHERE WELL.WEL_PK = :NEW.WEL_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM WELL_STATUS WHERE WELL_STATUS.STA_PK = :NEW.STA_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL_STATUS (WELL_TYPE, WELL_TYPE_DATE, OPER_STATUS, CLASS,WEL_FK)
VALUES(:NEW.WELL_TYPE, :NEW.WELL_TYPE_DATE, :NEW.OPER_STATUS, :NEW.CLASS,:NEW.WEL_PK);
ELSE
UPDATE WELL_STATUS SET WELL_STATUS.WELL_TYPE = :NEW.WELL_TYPE,
WELL_STATUS.WELL_TYPE_DATE = :NEW.WELL_TYPE_DATE,
WELL_STATUS.OPER_STATUS = :NEW.OPER_STATUS,
WELL_STATUS.CLASS = :NEW.CLASS,
WELL_STATUS.WEL_FK = :NEW.WEL_PK
WHERE STA_PK = :NEW.STA_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM PERMIT WHERE PERMIT.PER_PK = :NEW.PER_PK;
IF rowcnt = 0 THEN
INSERT INTO PERMIT (AUT_STATUS,WEL_FK) VALUES (:NEW.AUT_STATUS,:NEW.WEL_PK);
ELSE
UPDATE PERMIT SET PERMIT.AUT_STATUS = :NEW.AUT_STATUS,
PERMIT.WEL_FK = :NEW.WEL_PK
WHERE PERMIT.PER_PK = :NEW.PER_PK;
END IF;Now But still i am not getting result which i want.Like in WELL_STATUS table i could nt able to insert the value (WEL_FK) from (WEL_PK).And In PERMIT table column (WEL_FK) still i could nt able to insert the value (WEL_PK).
Now WEL_PK value autogenerate from the SEQ same with STA_PK and PER_PK.But instead of taking value from seq STA_PK take the value from WEL_PK (dnt know why ? But in data its shows me Same value WEL_PK and STA_PK).Same thing With PER_PK.
so where i am wrong ? i really need your help.
workspace:PRACTISE
UN:[email protected]
PW:testing
Application: 39289 - TESTTING
Thanks
Edited by: vijaya45 on Jul 13, 2009 9:44 PM
Edited by: vijaya45 on Jul 14, 2009 12:48 AM

Hello vijaya45,
Not sure if this will help, but I noticed you currently have a WELL_GENERATOR_TRIGGER_1 and a WELL_GENERATOR_TRIGGER_2, and "1" is disabled but "2" is enabled. Which one is supposed to be running at this point?
John

BI 7.0 data load issue: InfoPackage can only load data to PSA?

BI 7.0 backend extraction gurus,
We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.
After the transformation creation between the InfoSource and the ODS is done on this BI system, a new folder called "Data Transfer Process" is also created under this ODS in the InfoProvider view. In the Data Transfer Process, in the Extraction tab, picks 'Full' in the field Extraction Mode, in the Execute tab, there is a button 'Execute', click this button (note: so far we have not created InfoPackage yet) which sounds like to conduct the data load, but find there is no data available even if all the status show green (we do have a couple of records in the R3 table).
Then we tried to create an InfoPackage, in the Processing tab, find 'Only PSA' radio button is checked and all others like 'PSA and then into Data Targets (Package by Package)" are dimmed! In the Data Target tab, find the ODS as a target can't be selected! Also there are some new columns in this tab, 'Maintain Old Update Rule' is marked with red color 'X', under another column 'DTP(S) are active and load to this target', there is an inactive picture icon, that's weird since we have already activated the Data Transfer Process! Anyway, we started the data load in the InfoPackage, and the monitor shows the records are brought in, but since in the Process tab in the InfoPackage, 'Only PSA' radio button is checked with all others dimmed that there is no any data going to this ODS! Why in BI 7.0, 'Only PSA' radio button can be checked with others all dimmed?
Many new features with BI 7.0! Any one's idea/experience is greatly appreciate on how to load data in BI 7.0!

You dont have to select anything..
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
<b>Pre-requisite-</b>
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP..

How to View the Loaded Data

Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
Thanks

Hi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant

Load data in R/3 BW delta Queue

Hi,
Is there any option to load data in R/3 BW delta Queue. I have done nothing for that. I have found that new record is available in source table. Is there any option to schedule / execute in R/3 end.
Thanks & regards,
Goutam

Hi Goutam,
What do you mean ...Is it R3 Delta Queue or BW delta Queue???
As far as I consider it is R3 Delta Queue....For loading the data to R3 delta queue...1st let me know which update method you are using...
If its Direct update....document posting will be directly written to Delta Queue---RSA7.
If its V3 unserialised...then the changed document posting wil be captured and will be avaialble in Extraction Queue LBWQ and from there a collective run i.e. control jobs need to be scheduled as per your desired frequency to move it from LBWQ to Delta Queue RSA7.
If it is queued delta
u2022 Extraction data is collected for the affected application in an extraction queue
u2022 Collective run as usual for transferring data into the BW delta queue
Hope it is clear...
Let me know in case you need further details...
Thanks,
Amit Kr.

Unable to load data from an ODS to a Cube

Hi all,
I am traying to load data from an ODS to a cube, and I'm getting the following msg at the bottom of the screen monitor: <b>"No corresponding requests were found for request REQU_BZUH9ZPYNL5XLQNB7K8IQDKFS in the ODS/Cube" Message no. RSBM043.</b>
I am unable to load the data. The QM status is yellow. When the process starts, on the left hand of the monitor it shows: "0 of 84408 records" which is ok. I load that with this package before and it works well.
Can you help me what I have to do? I tried to wait but it was the same: no progress and no data in the cube.
Thank you very much and kind regards,
MM.
May be this helps...
When I look at the status, it says that I have a short dump at BW. It was CALL_FUNCTION_REMOTE_ERROR and the short text is "The function module "SUBST_TRANSFER_UPGEVAL" cannot be used for 'remote'". This short dump occurs very much before I shoot the upload.
Thanks again.

Hello MM,
Can you do the following..
make the Total status Red Delete the request from cube.
goto ODS -> Remove the Data Mart Status -> Try loading it again.
The error message that you get is common when we are trying to run a infopackage with the source object having no new request, (means all the requests available in the source are already moved to the targets). So please try the steps given above.
Hope it will help!

Unable to Load data in Planning

Hi,
I am receiving this error when ever i am trying to load data.
Launch error message:
"An error occurred while running the specified calc script. Check the log for details."
and some times
"You will be unable to update data when essbase in archive mode"
But i have checked the essbase, no "Back up process" is running.
Can Anyone advice me what's the issue..i am restarting the server everytime to fix the issue but not sure how i need to rectify it with out restarting the server.
Regards
Saravanakumar.Vijay

I take it you are running a script that loads data and then executes a rule/calc
"An error occurred while running the specified calc script. Check the log for details."
This refers to a calc/rule that has been run
"You will be unable to update data when essbase in archive mode"
This means that the database is still in archive mode, you can use Maxl to take it out of archive mode.
e.g. Alter database app.db end archive;
Cheers
John
http://john-goodwin.blogspot.com/

Loading data - NO_DBROUTID_FOUND

Similar Messages

Maybe you are looking for