Loading data to created variant

HI,
I have created a variant to transaction cji5 using RS_CREATE_VARIANT. How do we load data to this variant. I need to fill the data programatically after some processing

HI,
I'm trying to load data to variant while creating the variant. But in cji5 transaction one of my required screen field is more than 8 chars. I thnk bcoz of this I'm not able to submit the report with this created variant. My code is
      i_rsparams-kind    = 'P'.
      i_rsparams-selname = 'D0700_USEDB'.
      i_rsparams-low     = 'X'.
      APPEND i_rsparams.
Here 'D0700_USEDB' is more than 8 chrs
Thnx in advance

Similar Messages

Loading Data to Essbase using Rule File Failed

Hi
i'm using IKM SQL to Essbase Cbue,
Now I would like to use rule file when loading data,
I created one in Essbase cube, then define it on the target (flow) and the Tab on Rule seprator,
I reversed the Essbase Cbue again.
when loading I get the following error bellow
(before loading I verfiy with sample file based on the same strcture from my source and load it via data load from EAS
and it works fine. also it works without any rule file.)
here's the error I'm getting from operator:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException
     at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx30.f$0(<string>:23)
     at org.python.pycode._pyx30.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.j(e.java)
     at com.sunopsis.dwg.cmd.g.z(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.NullPointerException
     at com.hyperion.odi.connection.AbstractHypAppWriter.logErrorRecord(Unknown Source)
     at com.hyperion.odi.essbase.ODIEssbaseDataWriter.sendRecordArrayToEsbase(Unknown Source)
     ... 32 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.j(e.java)
     at com.sunopsis.dwg.cmd.g.z(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
pls advice what i'm doing worng?
Thanks!

So are you saying the data load interface works if you remove the rule in the options?
Have you ever got any data loads to run with a load rule or without?
Cheers
John
http://john--goodwin.blogspot.com/

Create sql loader data file dynamically

Hi,
I want a sample program/approach which is used to create a sql loader data file.
The program will read table name as i/p and will use
select stmt will column list derived from user_tab_columns from data dictionary
assuming multiple clob columns in the column list.
Thanks
Manoj

I 'm writing clob and other columns to a sql loader dat file.
Below sample code for writing clob column is giving file write error.
How can I write multiple clobs to dat file so that control file will handle it correctly
offset NUMBER := 1;
chunk VARCHAR2(32000);
chunk_size NUMBER := 32000;
WHILE( offset < dbms_lob.getlength(l_rec_type.narrative) )
LOOP
chunk := dbms_lob.substr(l_rec_type.narrative, chunk_size, offset );
utl_file.put( l_file_handle, chunk );
utl_file.fflush(l_file_handle);
offset := offset + chunk_size;
END LOOP;
utl_file.new_line(l_file_handle);

How to create XML data source/ and load data from a web service to BI

All,
I m trying to find a 'how to' document (or any document) that shows how to create an XML data source to load data directly from a web service or from an XML file.
I appreciate any help.

Hi Mike,
Two more for you:----
/thread/111488 [original link is broken]
http://help.sap.com/saphelp_nw70/helpdata/en/e6/1dd53bb90cbb1ae10000000a11402f/content.htm
Regards,
Suman

Load data in xml file into Pdf form created by LiveCycle Designer

I want to load data in xml file into Pdf form when Pdf opened and Form field will be filled with data from xml file .I try to use $host.importdata("filename.xml"); But i could not find suitable place to run my code. Can anyone give me some advice? thank you.

Hi,
extract your xml and then you can use insert all clause.
here's very small example on 10.2.0.1.0
SQL> create table table1(id number,val varchar2(10));
Table created.
SQL> create table table2(id number,val varchar2(10));
Table created.
SQL> insert all
2 into table1 values(id,val)
3 into table2 values(id2,val2)
4 select extractValue(x.col,'/a/id1') id
5        ,extractValue(x.col,'/a/value') val
6        ,extractValue(x.col,'/a/value2') val2
7        ,extractValue(x.col,'/a/id2') id2
8 from (select xmltype('<a><id1>1</id1><value>a</value><id2>2</id2><value2>b</value2></a>') col from dual) x;
2 rows created.
SQL> select * from table1;
        ID VAL
         1 a
SQL> select * from table2;
        ID VAL
         2 b                                                                    Ants

How to create a datasource for 0COSTCENTER to load data in csv file in BI

how to create a datasource for 0COSTCENTER to load data in csv file in BI 7.0 system
can you emil me the picture of the step about how to loaded individual values of the hierarchy using CSV file
thank you very much
my emil is <Removed>
allen

Step 1: Load Required Master Data for 0CostCenter in to BI system
Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
Step 4: Mapping
Create Text Node thats the first node (Root Node)
Insert Characteristic Nodes
Insert the Last Node of the Hierarchy
Then you need to create a Open hub Destination for extracting data into the .csv file...
Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
Thanks,
Sandhya

Create a script to update, deploy, load data with version 9.3.1

Hi,
I'd like to know if it's possible run a script to execute:
- Import dimensions by profile (by EPMA)
- deploy an application (by EPMA)
- load rule to load data (by essbase)
- Calculation script (by essbase)
we are using the version 9.3.1
Thanks in advanced.
Roby

Hi,
I don't believe there any batch command functionality for EPMA until version 11.
It is possible you can try and create a scheduled taskflow in EPMA to import a dimension and then reploy, finally you could get it run a batch script which contained a maxl script to load and calculate essbase data.
Cheers
John
http://john-goodwin.blogspot.com/

READ XML file + XSD file to create an load data in a table

Hi gurus,
What way you will use to create and load data in a SQL TABLE by reading xml+xsd files.
Can you provide my a running example?
Is it better to stage the XML structure + XML data in the database before creating/loading the real SQL table. (the size of the XML file could me 1GB)

See the FAQ..
For very large files make sure
1. Use FTP to load...
2. Ensure schema is registered with storeVarrayAsTable="true" and maintainDOM="false'
3. Install latest 10.2.0.3.0...
or
Look for SaxLoader example in the FAQ
-M

Automatically trigger the event to load data from Planning cube to Standard Cube

Hello,
We have a below set up in our system..
1. A Planning BEx query using which user makes certain entries and writes back data to the planning cube.
2. An actual reporting cube which gets data from the planning cube above.
Now, what we want to do is to automate the data load from Planning cube to Reporting cube.
This involves 2 things..
1. Change the setting " Change real time load behaviour " of the planing cube to Planning.
2. Trigger the DTP which loads data from Planning cube to reporting cube.
We want to automate the above two steps...
I have tried few things to achieve the same..
1. Created an event in SM64,
2. In the Planning cube "Manage" Screen, clicked on "Subsequent Processing" and provided the event details. ( Not sure if its the correct place to provide the event detail ).
3. Wrote a ABAP program which changes the setting of the planning cube ( " Change real time load behaviour " to Loading )
4. Created a process chain, where we have used the event as a start variant, used the ABAP program as a next step, DTP run as the last step..
This i hoped, would trigger the event as soon as a new request comes and sits in planning cube, which in turn would trigger the process chain which would load the data from Planning cube to reporting cube..
This is not working. I dont think the event is triggering, and even if does i am not sure whether it will start the process chain automatically. Any ideas please ?

hi,
try to do the transformation directly in the input cube by using CR of type exit, more details :
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/43/1c3d0f31b70701e10000000a422035/content.htm
hope it helps.

Need to load data from source .CSV files to oracle target database.

Hi,
This is the my scenario
I have .CSV files in ftp folder and need to load the data into target tables.
For that i need to create package and load the data into daily basis.
But some time .csv file name will vary daily basis.
can you any one suggest me???
Thanks in Advacne.
Zakeer

Dear Roy,
Thanks for your response
Now I am able to extract the .zip file OdiUnZip (file). and loading data into target this is chapping in static way
and my scenario is that some time i will get .zip files with different names with different .csv files
i need to dynamically find the new .zip file and extract it and load the data into target.
Please advice me..
Thanks in advance
Zakeer

Bulk Load data without specifying column names in control file

I am totally new to the world of Oracle databases and am having some trouble doing some basic data imports from a csv file. I have a large amount of data in an excel spreadsheet (a couple hundred columns by varying numbers of rows from 2- several thousand) which I want to import into my Oracle 11g Database. Currently I am trying to use sql loader and specify the import syntax in the control file. From the examples I've seen so far, it seems you must specify the columns individually for what you are importing. This is simply not reasonable for several hundred columns of data.
Is there sql loader syntax (or a better method all together) to import a comma delimited csv or excel spreadsheet into an oracle database where it automatically generates a table and columns based on the data in the target import file? Even if I must first create the table in the database, my key issue is being able to generate the column names during import to match the column headers in the import file. I appreciate any help you could provide.
FYI here is my first meager attempt at importing a comma delimited csv, here is my ctl file:
load data
infile 'C:\filepath\mock_data.csv'
into table allData
fields terminated by "," optionally enclosed by '"'
It says Syntax error at line 4. Expecting "(", found end of file.
I suspect there is more at issue here than a missing "("

You have to create the control file to map to the table.
Since you would already have created the tables, you could generate the controlfiles based on the table structures.
See the "unloader.zip" file under the Files link at http://asktom.oracle.com
-- it has scripts to create unload a table to a flat file and to create the SQLLoader controlfile to reload that data to another target database. It would be the second set of scripts that you can use.
Hemant K Chitale

Dynamically create varying number of buttons

Hi.
The website I'm currently working on has an object gallery.
Whenever the user clicks one of the objects, it zooms in and
displays a sub-gallery with other images of said object. The images
that make up these galleries are loaded into dynamically created
empty MovieClips inside a sub-gallery MovieClip. Each object has a
varying number of images and they're loaded and unloaded when the
zooming in/out of the object ends.
When you click one of the sub-gallery images, the main image
should change and display the clicked image. However, I'm having
trouble telling the MovieClips containing the sub-gallery images to
do anything when they're clicked. See attached code, please.
I'm guessing this has to do with the onRelease being declared
inside the onMotionFinished. The thing is I can't thing of a way to
declare the onRelease for every sub-gallery image before they're
loaded.
Thanks in advance.

Frank,
Thank you for the response.
On the page2 of the pdf link you provided there is a picture of the tree table and it shows the hierarchy of the first level(or root) parent (President, Steven King). If the data had n presidents (n first or root level ) then this will dispaly all data in the same tree table like
King
--Kochhar
----Greenberge
King 2
--report 1
----report 1.1
King n
--report n
----report n.1
My requirement is pretty close to this but slighly different where these n first level should appear in n different tree tables like below:
Treetable for: King
King
--Kochhar
----Greenberge
Treetable for: King 2
King 2
--report 1
----report 1.1
Treetable for: King n
King n
--report n
----report n.1
That is the reason why I am playing with af:forEach and also have a separate VO which returns all the presidents(first level parents) and view linked that to EmployeesVO so that the AM looks like
AllPresidentsVO
-----EmployeesVO (with the view criteria wihch returns the first level parents)
---------reportingManagers
forEach prints n instances for PresidentsVO King, King2.. King n but all these instances have the same children the tree for King (tree for King2 ... King n does not appear)
May be it should be achieved in a different way?

Can't load data through smart view (ad hoc analysis)

Hi,
There is EPM application where I want to give ability to planners to load data through smart view (ad hoc analysis). In Shared Services there are four options in
EssbaseCluster-1: Administrator, Create/Delete Application, Server Access, Provisioning Manager. Only Administrator can submit data in smart view (ad-hoc analysis). But I don't want to grant Essbase administrator to planners, I'm just interested to give them ability to load data through ad-hoc analysis. Please suggest!

I take that you refreshed the Planning security, If not refresh the security of those users. Managing Security Filters
Check in EAS whether those filters are created with "Write" permissions.
Regards
Celvin
http://www.orahyplabs.com

Can we load data for all levels in ASO?

Hi All,
Im creating cube in ASO
can i load data for all levels in ASO
we can load data for all Levels In BSO but in ASO i need confirmation????
and one more
wat is the consider all levels option in ASO is used for ? wat is the purpose?
Can any one help ,it would be appriciate.
Thanks

In an ASO cube you can only load to level zero
The consider all levels if used for aggregation hints. It allows you to tell the aggregation optimizer to look at all levels when deciding if aggregation needs to be done on the dimension

Not able to load data in tables with correct way

Hi
i made one trigger to load data in view and tables.
CODE FOR TRIGGER>>>>
Object Details Code Errors SQL
CREATE OR REPLACE TRIGGER "WELL_GENERATOR_TRIGGER_1"
INSTEAD OF INSERT ON VIEW_WELL_GENERATOR_FORM
FOR EACH ROW
DECLARE
rowcnt number;
BEGIN
INSERT INTO facility (FAC_PK) VALUES (:NEW.FAC_PK);
SELECT COUNT(*) INTO rowcnt FROM WELL WHERE WEL_PK = :NEW.WEL_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL (WEL_PK,SITE,FAC_FK) VALUES(:NEW.WEL_PK,:NEW.SITE,:NEW.FAC_PK);
ELSE
UPDATE WELL SET WELL.SITE = :NEW.SITE,
WELL.FAC_FK = :NEW.FAC_PK
WHERE WELL.WEL_PK = :NEW.WEL_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM WELL_STATUS WHERE WELL_STATUS.STA_PK = :NEW.STA_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL_STATUS (WELL_TYPE, WELL_TYPE_DATE, OPER_STATUS, CLASS,WEL_FK)
VALUES(:NEW.WELL_TYPE, :NEW.WELL_TYPE_DATE, :NEW.OPER_STATUS, :NEW.CLASS,:NEW.WEL_PK);
ELSE
UPDATE WELL_STATUS SET WELL_STATUS.WELL_TYPE = :NEW.WELL_TYPE,
WELL_STATUS.WELL_TYPE_DATE = :NEW.WELL_TYPE_DATE,
WELL_STATUS.OPER_STATUS = :NEW.OPER_STATUS,
WELL_STATUS.CLASS = :NEW.CLASS,
WELL_STATUS.WEL_FK = :NEW.WEL_PK
WHERE STA_PK = :NEW.STA_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM PERMIT WHERE PERMIT.PER_PK = :NEW.PER_PK;
IF rowcnt = 0 THEN
INSERT INTO PERMIT (AUT_STATUS,WEL_FK) VALUES (:NEW.AUT_STATUS,:NEW.WEL_PK);
ELSE
UPDATE PERMIT SET PERMIT.AUT_STATUS = :NEW.AUT_STATUS,
PERMIT.WEL_FK = :NEW.WEL_PK
WHERE PERMIT.PER_PK = :NEW.PER_PK;
END IF;Now But still i am not getting result which i want.Like in WELL_STATUS table i could nt able to insert the value (WEL_FK) from (WEL_PK).And In PERMIT table column (WEL_FK) still i could nt able to insert the value (WEL_PK).
Now WEL_PK value autogenerate from the SEQ same with STA_PK and PER_PK.But instead of taking value from seq STA_PK take the value from WEL_PK (dnt know why ? But in data its shows me Same value WEL_PK and STA_PK).Same thing With PER_PK.
so where i am wrong ? i really need your help.
workspace:PRACTISE
UN:[email protected]
PW:testing
Application: 39289 - TESTTING
Thanks
Edited by: vijaya45 on Jul 13, 2009 9:44 PM
Edited by: vijaya45 on Jul 14, 2009 12:48 AM

Hello vijaya45,
Not sure if this will help, but I noticed you currently have a WELL_GENERATOR_TRIGGER_1 and a WELL_GENERATOR_TRIGGER_2, and "1" is disabled but "2" is enabled. Which one is supposed to be running at this point?
John

Loading data to created variant

Similar Messages

Maybe you are looking for