Loading Flash Files After Slide is Loaded.

Is there a way to trigger a flash file to play once the captivate slide has fully loaded?
Thank you.

I did a bit of digging. The reason why this wasn't working is because the class in question was referenced by the nib files, but not in code. Therefore, while the code compiled and there were no warnings with the nib files, the linker was not linking the classes because no code used them directly.
This can be fixed by going to the Project Settings, and on the Build tab, underneath the Linking heading, adding -ObjC to the Other Linker Flags section.

Similar Messages

How to load other obejects in flash file after intro using ActionScript 3.0

How to load other obejects in flash file after intro using ActionScript 3.0 or any other method all in same fla file. see blow intro screen shot ,this one playing repeatedly without loading other fla pages .only way to load other pages is click on Skip intro .see second screeshot below .i need that site to load after intro .
see codes already in
stop();
skipintro_b.addEventListener(MouseEvent.CLICK, skipintro_b_clicked);
function skipintro_b_clicked(e:MouseEvent):void{
gotoAndStop("whoweare");
There is another script there
/* Simple Timer
Displays a countdown timer in the Output panel until 30 seconds elapse.
This code is a good place to start for creating timers for your own purposes.
Instructions:
1. To change the number of seconds in the timer, change the value 30 in the first line below to the number of seconds you want.
var fl_TimerInstance:Timer = new Timer(1000, 30);
fl_TimerInstance.addEventListener(TimerEvent.TIMER, fl_TimerHandler);
fl_TimerInstance.start();
var fl_SecondsElapsed:Number = 1;
function fl_TimerHandler(event:TimerEvent):void
trace("Seconds elapsed: " + fl_SecondsElapsed);
fl_SecondsElapsed++;
i have no knowledge about these thing ,any help really appreciated .

Ned Murphy Thank you very Much .It is working .Great advice

How do i play my videos in flash file after moving SWF file to website?

Hello all,
I am having some problems showing my videos in flash after moving it anywhere besides my computer.
I published my flash file once as a exe. file and sent it to another computer, where it all worked but my videos, which didn't show up at all.
I also published them as SWF files, then put them up on my free website (where i don't have access to the ftp) and the videos still aren't there.
The videos will play fine in an SWF file on my computer, but i am assuming when they are away from the videos, they don't have a source to access them.
I also tried sending the videos along with the SWF files when sending to other computers and it still doesn't work.
I now have a free hosted website (with wix.com if that makes any difference) with my flash work on, but no videos. I even tried to embed a youtube video into the scenes the videos are meant to appear, and put the videos on youtube, then i discovered you can't put that sort of HTML into flash.
Does anyone know how to show the videos on these sort of website, or even better, how to keep them in original file when sending them, so they show on other computers.
Sorry if I've waffled but I'm trying to clear up my situation .
Any help would be super, many thanks,
Flasher87

i am using the website wix, so in order to put the swf file up you just click the "Upload SWF" button, so i don't know how i could put the videos along with the swf, the swf is just sat on the page once i upload it.
second, when using this type of website do you know how i'd go about giving the website the permissions to play flv files?
Thank you.

Grey flashing file after restarting my computer

My mac book air froze and i turned it off using the power button. when i tried to turn it back on the OS X utilities options where on the screen. I was fiddleing with them a little bit seeing what the options did ubt nothing seemed to get me anywhere. when i restarted it another time there is a little grey file flashing on my screen and now I'm stuck!
any suggestions?

If you see a grey folder with a question mark flashing after restarting your computer it means that it cannot find an operating system to boot from. When you were in the OS X utilites page, you either:
1. Messed with your hard drive / OS X partition.
2. Erased your OS X partition completely.
Either way, if you continue to get the flashing folder, you'll have to erase your hard drive completely and reinstall OS X using internet recovery. If you don't have backups, I'm sorry to say that all your data is gone. If you'd like me to, I can give you detailed instructions on formatting your hard drive and reinstalling OS X if you don't already know how to.

How to Edit a flash file

Hi all,
I have a flash file, which I took from my website and want to
modify some of the contents and links in the flash file. I
installed "Macromedia Flash 8" and open the flash file; after
opening all I can see in the menu bar of my flash is "File, View,
Debug and Control" and could not find any control or tool to edit
the file and surprisingly rest of the other macromedia toolbar
icons are disabled. I need to know from where to start - How to
modify my flash file.
Your help is highly appreciated.
Thanks in advance
AP

quote:
Originally posted by:
Purplehaze
Also the file I am having trouble with is from a Template
that I got from my Host it is suppose to be made to be edited I
have both the files. I would still need the decompiler?
I do not know what files you have, 'fraid I cannot answer
this
My Friend
I think you need to check out some of the books, online
tutorials, course etc pertaining to Flash. Build up your knowledge
a little at a time and you will surprise yourself at what you can
achieve, you would also probaby build your own web apps and not
rely on templates.
There are many good folk on here that would help you with
your projects - go out and explore it - it's exciting - good luck

Text field is not working at first time after loading the flash files

Hi to all,
     In my Java application, I'm using a text field and a panel to load flash files. I'm using JDIC 0.9.1 to load the flash files in the panel. The flash files are created by Flash CS4.
     While running the application, I can't enter any value in the Text field, after minimize and maximize the application I can enter the values.
     This problem happens after change the jre version from 1.6 to 1.7.
     I'm getting the following exception while running the application.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNati ve(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unkn own Source)
pls give me a solution.
Thanks in advance...:)

Have you tried testing on a server?
When you test in Flash, see if you get traces when you click these buttons.

Embeded Flash files stop loading part way through after update to 10.2

Hello, I am currently having an issue with Flash. After the last update to 10.2, flash files, both audio and video, stop loading part way through them and do not start up again. For instance, on youtube, about 2 minutes worth of video will load but load slowly and then stop completely. The only way to get it to advance is to click past the section that has loaded and it will load the next 2 minutes. On Myspace Music, a song plays about 40 seconds each time and stops completely and will not load anymore, even if I try to skip to another part of the song. I am running Windows 7 Ultimate 64bit edition with Firefox 4.0 Beta 12 64 bit edition as well. Also I have tried clearing my cache, cookings, temp files, removing and installing Flash countless times, including older versions, as well as tried Google Chrome and IE. All give me the exact same issue no matter what I do. It is really frustrating because I cannot watch or listen to anything embeded in Flash online without having to keep clicking the next section every little bit. If anyone can help, please do and I thank you.

Hi, Since your OS is a 64bit, are you using the 32bit browser for IE? I see you have the FF beta. Have they come out with a 64bit browser? I don't follow the FF beta so if that's true, it's news to me.
Let me know,
Thanks,
eidnolb

I can't enter any values in JTextField after loading the flash files.

Hi to all,
In my application I have two panels. One panel has JTextField and another panel i loaded flash files.
The flash files are build by CS4. I'm using JDIC to load the flash files. While open the application i loaded flash file and I try to enter any input in the textfiled, but I can't. After minimize and maximize the application I can enter the values. This problem happens only after I change the jre version from 1.6 to 1.7.
While loading flash files I'm getting the below exception.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNative(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unknown Source)
pls give me a solution.
Thanks in advance...:)

I can't enter any values in JTextField after loading the flash files., locking.

I can't enter any value in the Text field, after loading flash files

Hi to all,
In my Java application, I'm using a text field and a panel to load flash files. I'm using JDIC 0.9.1 to load the flash files in the panel. The flash files are created by Flash CS4.
While running the application, I can't enter any value in the Text field, after minimize and maximize the application I can enter the values.
This problem happens after change the jre version from 1.6 to 1.7.
I'm getting the following exception while running the application.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNati ve(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unkn own Source)
pls give me a solution.
Thanks in advance...:)

I can't enter any values in JTextField after loading the flash files., locking.

How to speed up the loading of live data into flash file.

How to speed up the loading of live data into flash file if the swf file size is 1.5 MB. Flash file is using 20 web service connections to load the live data.

Hello,
I am also facing a similar problem wherein the SWF file takes time to load the refreshed data in Infoview i.e. after exporting the xlf file to Business Objects platform. Currently I am using Xcelcius Engage/Enterprise 2008 SP3 Windows (file name: 51038212.ZIP) version 5.3.0.0 build number 12,3,0,670. Also the SWF file is approximately 2MB in size and it uses 42 live office connections.
Please suggest solution as to how to decrease the time it takes to refresh the live office connections.

Creating uicomponents in loaded flash file

hello flex developers. i have a flex application and a flash swf file. flex application loads this flash file (which contains different overlays and some logic) and creates some flex components (UIComponents like Buttons and Labels) inside it in some places (in some overlays).
i've tried various options with UIMovieClip, ContainerMovieClip, FlexContentHolder and FlexComponentKit but none of them works... after i add a UIComponent to loaded flash file - the component doesn't get initialized.
also i tried examples with custom flash components embedded directly into flex application, which inherit from UIMovieClip and ContainerMovieClip, and they work fine inside flex application. but if i paste them in flash file and then load inside flex application - i again see UIComponents not being initialized...
please help.
here is my source code:
flexLoadUITest.zip (loads flash file and then tries to create a button inside its custom flash component, but the button doesn't get initialized...) - http://www.megaupload.com/?d=J9Y28JX0
flexUISpriteTest.zip (uses embedded flash custom components and displays button properly) - http://www.megaupload.com/?d=YF9BLCW0
also here is my plain source code from not working flexLoadUITest:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" minWidth="955" minHeight="600" addedToStage="onStageAdded(event)">
    <mx:Script>
        <![CDATA[
            import mx.controls.Button;
            import mx.core.UIComponent;
            import mx.flash.ContainerMovieClip;
            private var loader:Loader;
            private var wrapper:UIComponent;
            private var container1MC:ContainerMovieClip;
            private var btn:Button;
            private function onStageAdded(event:Event):void{
                trace("onStageAdded");
                wrapper = new UIComponent;
                addChild(wrapper);
                loader = new Loader();
                loader.contentLoaderInfo.addEventListener(Event.COMPLETE,onComplete);
                var loaderContext:LoaderContext=new LoaderContext();
                loaderContext.applicationDomain=ApplicationDomain.currentDomain;
                //loaderContext.securityDomain=SecurityDomain.currentDomain;
                loader.load(new URLRequest("flash.swf"),loaderContext);
            private function onComplete(event:Event):void{
                trace("onComplete");
                loader.contentLoaderInfo.removeEventListener(Event.COMPLETE,onComplete);
                loader.content.addEventListener(Event.ADDED_TO_STAGE,onContentAdded);
                wrapper.addChild(loader.content);
            private function onContentAdded(event:Event):void{
                trace("onContentAdded");
                loader.content.removeEventListener(Event.ADDED_TO_STAGE,onContentAdded);
                container1MC = loader.content["container1_mc"];
                trace("container1MC is " + container1MC);
                btn = new Button();
                btn.label="deniska";
                btn.width=btn.height=100;
                btn.addEventListener(Event.ADDED_TO_STAGE,onBtnAdded);
                container1MC.content=btn;
                //container1MC.addChild(btn);
            private function onBtnAdded(event:Event):void{
                trace("onBtnAdded");
                btn.removeEventListener(Event.ADDED_TO_STAGE,onBtnAdded);
        ]]>
    </mx:Script>
</mx:Application>

got it, thanks. basically i don't want to spend time hacking UIComponents. to tell the truth i already have a custom UISprite logic to work with UIComponents, but it still using hacks... maybe you can recommend me some unified/modern way how to be able creating flex components dynamically and work with them in loaded swf files? simply these swfs are created by designers who work in Flash Professional. they draw there different animations, paste various assets and map some "content" for future dynamic components. of course i can create there non flex components, add sprites to these "content" areas, but i want flex UI components to appear there because they need to work close with system's core and various air/flex features. as i see flex component kit gives me ability to use some separate custom components created in flash with a small additional conversion of them. but these are all separate components, and i need to work with loaded swf file. are there any recommendations or guidelines for this direction? or maybe there is simply a tool/class that can be used/loaded into these swfs and make them fully capable for flex usage after loading?

How to delete a jar file after loading image files from it

Hi,
How can I delete a jar file after some image files have been loaded? For example, say, I have "a.jar" which contains an image "a.gif" in the root directory of the c drive. I would like to get the image size and then delete the jar file. Here is the code snippet:
    URL url = new URL("jar:file:/C:\\a.jar!/a.gif");
    Icon icon = new ImageIcon(url);
    System.out.println("icon size ? " + icon.getIconHeight());
    File file = new File("c:\\a.jar");
    while(file.exists())
        file.delete();
        try
            Thread.sleep(100);
        catch (InterruptedException ignored)
    System.out.println("file deleted.");I get the image size correctly but just can not delete the jar file. Apparently the file handle is not released, but how to close it? Any hint will be appreciated.
Justin Jan

I am sure the URLConnection.defaultUseCaches is set before it is connected otherwise I should catch an IllegalStateException on conn.setUseCaches(false).
        try
            URL url = new URL("jar:file:/C:\\a.jar!/a.gif");
         URLConnection conn = url.openConnection();
         conn.setDefaultUseCaches(false);
         conn.setUseCaches(false);
            Icon icon = new ImageIcon(url);
            System.out.println("icon size ? " + icon.getIconHeight());
            url.openConnection().getInputStream().close();
            System.gc();
         System.runFinalization();
            File file = new File("c:\\a.jar");
            while (file.exists())
                file.delete();
                try
                    Thread.sleep(10);
                catch (InterruptedException ignored)
            System.out.println("file deleted.");
        catch (Throwable t)
            t.printStackTrace();

Remove / unload external swf file(s) from the main flash file and load a new swf file and garbage collection from memory.

I can't seem to remove / unload the external swf files e.g when the carousel.swf (portfolio) is displayed and I press the about button the about content is overlapping the carousel (portfolio) . How can I remove / unload an external swf file from the main flash file and load a new swf file, while at the same time removing garbage collection from memory?
This is the error message(s) I am receiving: "TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at index_fla::MainTimeline/Down3()"
import nl.demonsters.debugger.MonsterDebugger;
var d:MonsterDebugger=new MonsterDebugger(this);
stage.scaleMode=StageScaleMode.NO_SCALE;
stage.align=StageAlign.TOP_LEFT;
stage.addEventListener(Event.RESIZE, resizeHandler);
// loader is the loader for portfolio page swf
var loader:Loader;
var loader2:Loader;
var loader3:Loader;
var loader1:Loader;
// resize content
function resizeHandler(event:Event):void {
    // resizes portfolio page to center
loader.x = (stage.stageWidth - loader.width) * .5;
loader.y = (stage.stageHeight - loader.height) * .5;
// resizes about page to center
loader3.x = (stage.stageWidth - 482) * .5 - 260;
loader3.y = (stage.stageHeight - 492) * .5 - 140;
/*loader2.x = (stage.stageWidth - 658.65) * .5;
loader2.y = (stage.stageHeight - 551.45) * .5;*/
addEventListener(Event.ENTER_FRAME, onEnterFrame,false, 0, true);
function onEnterFrame(ev:Event):void {
var requesterb:URLRequest=new URLRequest("carouselLoader.swf");
loader = null;
loader = new Loader();
loader.name ="carousel1"
//adds gallery.swf to stage at begining of movie
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader.load(requesterb);
} catch (error:SecurityError) {
trace(error);
addChild(loader);
loader.x = (stage.stageWidth - 739) * .5;
loader.y = (stage.stageHeight - 500) * .5;
// stop gallery.swf from duplication over and over again on enter frame
removeEventListener(Event.ENTER_FRAME, onEnterFrame);
//PORTFOLIO BUTTON
//adds eventlistner so that gallery.swf can be loaded
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
function Down(event:MouseEvent):void {
// re adds listener for contact.swf and about.swf
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
//unloads gallery.swf from enter frame if users presses portfolio button in nav
var requester:URLRequest=new URLRequest("carouselLoader.swf");
    loader = null;
loader = new Loader();
loader.name ="carousel"
loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader);
loader.x = (stage.stageWidth - 739) * .5;
loader.y = (stage.stageHeight - 500) * .5;
removeChild( getChildByName("about") );
removeChild( getChildByName("carousel1") );
// remove eventlistner and prevents duplication of gallery.swf
MovieClip(root).nav.portfolio.removeEventListener(MouseEvent.MOUSE_DOWN, Down);
//INFORMATION BUTTON
//adds eventlistner so that info.swf can be loaded
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
function Down1(event:MouseEvent):void {
//this re-adds the EventListener for portfolio so that end user can view again if they wish.
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
var requester:URLRequest=new URLRequest("contactLoader.swf");
loader2 = null;
loader2 = new Loader();
loader2.name ="contact"
loader2.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader2.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader2);
loader2.x = (stage.stageWidth - 658.65) * .5;
loader2.y = (stage.stageHeight - 551.45) * .5;
// remove eventlistner and prevents duplication of info.swf
MovieClip(root).nav.info.removeEventListener(MouseEvent.MOUSE_DOWN, Down1);
//ABOUT BUTTON
//adds eventlistner so that info.swf can be loaded
MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
function Down3(event:MouseEvent):void {
//this re-adds the EventListener for portfolio so that end user can view again if they wish.
MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
var requester:URLRequest=new URLRequest("aboutLoader.swf");
loader3 = null;
loader3 = new Loader();
loader3.name ="about"
loader3.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
function ioError(event:IOErrorEvent):void {
trace(event);
try {
loader3.load(requester);
} catch (error:SecurityError) {
trace(error);
addChild(loader3);
loader3.x = (stage.stageWidth - 482) * .5 - 260;
loader3.y = (stage.stageHeight - 492) * .5 - 140;
removeChild( getChildByName("carousel") );
removeChild( getChildByName("carousel1") );
// remove eventlistner and prevents duplication of info.swf
MovieClip(root).nav.about.removeEventListener(MouseEvent.MOUSE_DOWN, Down3);
stop();

Andrei1,
Thank you for the helpful advice. I made the changes as you suggested but I am receiving a #1009 error message even though my site is working the way I wan it to work. I would still like to fix the errors so that my site runs and error free. This is the error I am receiving:
"TypeError: Error #1009: Cannot access a property or method of a null object reference."
I'm sure this is not the best method to unload loaders and I am guessing this is why I am receiving the following error message.
     loader.unload();
     loader2.unload();
     loader3.unload();
I also tried creating a function to unload the loader but received the same error message and my portfolio swf was not showing at all.
     function killLoad():void{
     try { loader.close(); loader2.close; loader3.close;} catch (e:*) {}
     loader.unload(); loader2.unload(); loader3.unload();
I have a question regarding suggestion you made to set Mouse Event to "null". What does this do setting the MouseEvent do exactly? Also, since I've set the MouseEvent to null do I also have to set the loader to null? e.g.
---- Here is my updated code ----
// variable for external loaders
var loader:Loader;
var loader1:Loader;
var loader2:Loader;
var loader3:Loader;
// makes borders resize with browser size
function resizeHandler(event:Event):void {
// resizes portfolio page to center
     loader.x = (stage.stageWidth - loader.width) * .5;
     loader.y = (stage.stageHeight - loader.height) * .5;
// resizes about page to center
     loader3.x = (stage.stageWidth - 482) * .5 - 260;
     loader3.y = (stage.stageHeight - 492) * .5 - 140;
//adds gallery.swf to stage at begining of moviie
     Down();
//PORTFOLIO BUTTON
//adds eventlistner so that gallery.swf can be loaded
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
function Down(event:MouseEvent = null):void {
// re adds listener for contact.swf and about.swf
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
//unloads gallery.swf from enter frame if users presses portfolio button in nav
     var requester:URLRequest=new URLRequest("carouselLoader.swf");
     loader = new Loader();
     loader.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader.load(requester);
     } catch (error:SecurityError) {
     trace(error);
     this.addChild(loader);
     loader.x = (stage.stageWidth - 739) * .5;
     loader.y = (stage.stageHeight - 500) * .5;
// sure this is not the best way to do this - but it is unload external swfs
     loader.unload();
     loader2.unload();
     loader3.unload();
// remove eventlistner and prevents duplication of gallery.swf
     MovieClip(root).nav.portfolio.removeEventListener(MouseEvent.MOUSE_DOWN, Down);
//INFORMATION BUTTON
     //adds eventlistner so that info.swf can be loaded
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     function Down1(event:MouseEvent = null):void {
     //this re-adds the EventListener for portfolio so that end user can view again if they wish.
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
     var requester:URLRequest=new URLRequest("contactLoader.swf");
     loader2 = null;
     loader2 = new Loader();
     loader2.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader2.load(requester);
}      catch (error:SecurityError) {
     trace(error);
     addChild(loader2);
     loader2.x = (stage.stageWidth - 658.65) * .5;
     loader2.y = (stage.stageHeight - 551.45) * .5;
loader.unload();
loader2.unload();
loader3.unload();
     // remove eventlistner and prevents duplication of info.swf
     MovieClip(root).nav.info.removeEventListener(MouseEvent.MOUSE_DOWN, Down1);
//ABOUT BUTTON
     //adds eventlistner so that info.swf can be loaded
     MovieClip(root).nav.about.addEventListener(MouseEvent.MOUSE_DOWN, Down3, false, 0, true);
     function Down3(event:MouseEvent = null):void {
     //this re-adds the EventListener for portfolio so that end user can view again if they wish.
     MovieClip(root).nav.portfolio.addEventListener(MouseEvent.MOUSE_DOWN, Down, false, 0, true);
     MovieClip(root).nav.info.addEventListener(MouseEvent.MOUSE_DOWN, Down1, false, 0, true);
     var requester:URLRequest=new URLRequest("aboutLoader.swf");
     loader3 = null;
     loader3 = new Loader();
     loader3.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, ioError);
     function ioError(event:IOErrorEvent):void {
     trace(event);
     try {
     loader3.load(requester);
}      catch (error:SecurityError) {
     trace(error);
     addChild(loader3);
     loader3.x = (stage.stageWidth - 482) * .5 - 260;
     loader3.y = (stage.stageHeight - 492) * .5 - 140;
     loader.unload();
     loader2.unload();
     loader3.unload();
     // remove eventlistner and prevents duplication of info.swf
     MovieClip(root).nav.about.removeEventListener(MouseEvent.MOUSE_DOWN, Down3);
     stop();

Problem with loading flash files in applet

hi
using JEditpane i can load html pages but it's not supporting gif and flash files.is there any way to open a html page which contains flash and gif files.
please help me...

jeditpane does not support flash files etc, i am not sure if it even support applets if yes probably with some limited way, anyway flash files are not supported, but you can lanch system web browser to show content with flash like internet explorer, latest mustang will suport this

Trying to load flash file in iWeb and when I enter info in the "html snippet" box a "missing plug-in" message comes up (although i have adobe flash player in, if that's the plug-in they're looking for). Anyone have any similar problems or solution. Thanks

I'm trying to load flash file in iWeb and when i enter info in the "html snippet" box a "missing plug-in" message comes up (although i have Adobe Flash player installed, if that's the plug-in they're looking for). Anyone have any similar problems or solutions. Thanks

when i publish my site and vew it the page on the web it just comes up with the file name w/ the ,swf and the "mising plug-in" message below. if i click on the file name it displays the flash file but gigantic (the entire height of the page).totally perplexed!
anyway, here is the code.
<object classid=”clsid:D27CDB6E-AE6D-11cf-96B8-444553540000”codebase=”http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0, 40,0”width=”244” height=”221” id=”ETrade_banner_Gumby_replay”><paramname=movie value=”ETrade_banner_Gumby_replay.swf”><param name=qualityvalue=high><param name=base value=”.”><embed src=”ETrade_banner_Gumby_replay.swf”quality=high width=”244” height=”221” name=”ETrade_banner_Gumby_replay”align=”” type=”application/x-shockwave-flash” pluginspage=”http://www.macromedia.com/go/getflashplayer”base=”.”></embed></object>

Loading Flash Files After Slide is Loaded.

Similar Messages

Maybe you are looking for