Loading multiple files into a target table parallely

Hi
We are building an interface to load from flat files to an Oracle table. The input can be more than one files all of th same format. I have created a variable for the flat file data store. I have created 2 packages
In package 1
I have put odi file wait to trigger whenever files come into the directory . The list of files is written to a metadata table table. A procedure is triggered which picks a record from the metadata table and calls the scenario for calls package 2 by passing the selected record as parameter.
In package 2
The variable value is set to the parameter passed from package 1 procedure
The interface runs to load the flat file = to the variable value into the target table
Now if the directory has more than one flat file , the procedure in package 1 calls the package 2 scenario more than one times. This causes sequential load from each flat file to the target table. Is there a way wherein the multiple flat files can be loaded in parallel to the same target table? At this point ,I am not sure if this is possible as there is only one interface and one variable for the source file

As per your requirement , your process seems to be always continues like a loop[ reason being as you have mentiond - I dont want to wait for all files to come in. As soon as a file comes in the file has to be loaded. ] .
You can solve the issue of file capture using OdiFileWait to let you know when the files have arrived.
Tell me this what do you plan to when the File loading is complete, will that be in the same folder and when new files come will that update with the same name or different name , becuase irresptive of same file or different if the files are present in the same folder after loading into target , then we might do repetitive loading of files. Please tell me how do you plan to handle this.
When you have plan to use LKM file to sql , what is the average number of source records coming into each sample files. ?
Just to add to above question , what is the average numner of parallel loads you are expecting and what is the time interval between each paralled loading you are expecting.

Similar Messages

Loading XML file into non-XML table(s)

HI Gentlemen,
I successfully registered my schema and generated an xml-based table and a TYPE. However, I do not have the table that would correspond to this TYPE. How do I get to it? How can I use FTP or HTTP protocol to load actual data from the corresponding .xml file into this table?
Thanks in advance, kind regards from
Miklos HERBOLY

You need to include the XML schema location information in the XML documents to point to the registered XML schema.
For example,
If you register an XML schema to XML DB with "http://www.example.com/po.xsd"
In the XML document, the xml schema location can be:
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.example.com/po.xsd http://www.example.com/po.xsd">
For more information, you can check the example in the following page:
http://www.oracle.com/technology/sample_code/tech/xml/xmldb/index.html
Best,

Help with AS3, loading multiple files into a movieclip in specific order in scrollbar

Hello! I am in need of some advice. We are trying to build a site with these features:
Our site will be built in Actionscript 3.
1. A navigation menu that, when a button is clicked, will scroll the site quickly to a specific Y position using swfaddress.
2. The entire site is controlled by a flash scroll bar, which will be scrolling a single movieclip.
    2A. The movieclip will load content corresponding to the navigation categories, all which is organized into zipped files (using this to extract the contents of each section, example: about.zip for the about         section of the site)
    2B. The movieclip will load multiple zipped files one by one that correspond to the navigation, in order, making the site appear to be very tall.
**What we are in need of is understanding how to load multiple zipped files into a movie clip, in a specific order, and having them scroll between one another through the navigation. The separate navigation categories can be in movieclips instead of zipped files if that is easier.
Here is a reference of something that works like this: http://swfc-shanghai.com/#/about/

Hello kglad! I have set aside the idea of using zipped files, and am now just using multiple external swfs that I'd like to load into the movieclip in a specific order. Any thoughts?
I'm new to AS3, and I'm attempting to create a scrolling movieclip that will load multiple external files, in order, into that movieclip. I'm using XML as well. At this point, nothing is loading into my movieclip (contentMain) and it's a bit frustrating! Thank you for your help!
Current error: 1180: Call to a possibly undefined method load.
AS3:
//XML Loader
var myXML:XML = new XML();
myXML.ignoreWhite = true;
myXML.load ("master.xml");
myXML.onLoad =function(sucess) {
   if (sucess) {
contentMain.loadAll();{
     load("1_Overview.swf")
     load("2_Webcam.swf")
     load("3_Twounion.swf")
     load("4_Oneunion.swf")
     load("5_Retail.swf")
     load("6_Nearby.swf")
     load("7_Courtyard.swf")
     load("8_Map.swf")
     load("9_Conference.swf")
     load("10_News.swf")
     load("11_Sustainability.swf")
     load("12_Contact.swf")
addEventListener("complete",onLoad)
onLoad();{
//load all
     }else {
         trace("ERROR LOADING XML");

How to load multiple (2 or more) target tables simultaneously?

Hi,
I have a requirement where I have to load 2 target tables simultaneously. Reason same primary key value has to be loaded at both the targets.
For eg:
Source table:
col1, col2, col3, col4, col5.... col20
Target 1:
T1C1=unique value from seq1
T1C2=col1
T1C3=col2
T1C9=col8
Target 2:
T2C1=same value as inserted above from seq1
T2C2=col9
T2C3=col10
T2C4=col11
T2C13=col20
Any response is highly appreciated.
Thanks for your time in advance.
-- CHikk

Hi, please, call me Cezar! :D
OK, that is a overview guide, are you confident to go thru KM customizing? If not, let me know.
1) For achieve that I figured out to use the UD's (UD1..UD5) fields from interface
2) Create 2 news option at IKM like: TABLE_UD1 and TABLE_UD2
3) change the KM code (C$ and I$) for generate code for each column group (UD1 and UD2 update and insert code). The I$ must have all columns.
4) at Interface level you will drag and drop both target tables at source, right-click on each one and add it to the target as temp table.
5) drop the targets from source area
6) for each group of columns from Target1 and target2 check the columns as UD1 and UD2 respectively and the sequence must be checked as UD1 and UD2 because it is common to the both target table.
7) add the real sources and create all mapping.
8) now just go to the Flow table and put the correspondent table name at each option. You should use an ODI API to get the right schema when change the context to production.
I just describe the general architecture once the technical implementation needs KM customize knowledge.
Make any sense and/or help you?
Be free to contact me at my email (see profile).

Load two input file into One Target table through SQL LOADER

Hi Expert,
I have 2 .cvs files.
1st file having cols as account_no & first name
2nd file having cols as account_no & last name
There is a table called temp has 3 cols accounts_number first name & last name
accounts number in both files are same
Now I wann upload these 2 files in to table temp
how do I do that
Pls suggest
Thx
Umesh Goel

UG wrote:
I dont want truncate my table bcoz account no and first name from first file and last name from second file.
so pls suggest something else....Hang on, I'll go find you some glasses. I think you're having trouble reading.
First file : Control file truncates and loads data
Second file : Control file does not truncate and loads data
2 Calls to SQL*Loader
Is that a little clearer?
Are you saying there is a relationship between the data in the two files?
How do you know which last name relates to which first name in the first file? Is there a reference key between the records on the two files?
Perhaps you'd better show us an example of the contents of the files so we can see what you are trying to do.

How to load .csv file into an abap table

Hi,
Pls provide me with a sample code on how to load a .csv file (with column header and rows of data) into a table in sap.
Thank you!
Moderator Message: A google search would yield faster results, so search!
Edited by: Suhas Saha on Jan 16, 2012 5:30 PM

Hi,
Using GUI_upload convert file to internal table data.
Using the below statement separate header and data from CSV.
Read t_itab into wa_titab index 1.
delete t_itab from wa_itab.
Create an internal table with the structure same as 'CSV' file and use the below statement to separate.
loop at t_itab into wa_itab.
      split wa_itab-rec at ',' into var1 var2 var3.
      wa_output-v1 = var1.
      wa_output-v2 = var2.
      wa_output-v3 = var3.
    append wa_output to t_output.
endloop.
Edited by: syamsundr on Jan 16, 2012 11:54 AM

SQL Loader - Load multiple files in UNIX

HI all, I'm looking for a bit of help with using SQL LOADER to load multiple files into one table. I've had a look on the forums but still struggling with this one.
What I want to do is basically upload everything thats in /home/ib. I know you can use INFILE for several files in the control file but I have several hundred files to upload so this isn't practical. Can I pass the directory name as an INFILE parameter?
Any help would be appreciated.

On Unix you shouldn't worry about that. See this example :
[ora102 work db102]$ cat test11.dat
aaaaa,bbbbb
ccccc,ddddd
eeeee,fffff
[ora102 work db102]$ cat test12.dat
ggggg,hhhhh
jjjjj,kkkkk
lllll,mmmmm
[ora102 work db102]$ cat test13.dat
nnnnn,ooooo
ppppp,qqqqq
rrrrr,sssss
[ora102 work db102]$ cat load.sh
CTL=load.ctl
echo "load data" > $CTL
for DAT in test1*.dat
do
        echo "INFILE "$DAT >> $CTL
done
echo "replace"                  >> $CTL
echo "INTO TABLE test1"         >> $CTL
echo "fields terminated by ','" >> $CTL
echo "trailing nullcols"        >> $CTL
echo "( a, b )"                 >> $CTL
sqlldr test/test control=load.ctl
[ora102 work db102]$ ./load.sh
SQL*Loader: Release 10.2.0.1.0 - Production on Mon Oct 2 11:45:44 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Commit point reached - logical record count 3
Commit point reached - logical record count 6
Commit point reached - logical record count 9
[ora102 work db102]$ sqlplus test/test
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 2 11:45:49 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
TEST@db102 SQL> select * from test1 order by a,b;
A                    B
aaaaa                bbbbb
ccccc                ddddd
eeeee                fffff
ggggg                hhhhh
jjjjj                kkkkk
lllll                mmmmm
nnnnn                ooooo
ppppp                qqqqq
rrrrr                sssss
9 rows selected.
TEST@db102 SQL>

Sorry for posting a wrong question Loading multiple files!!

Sorry for posting a wrong question Loading multiple files!!
As per my understanding
Sorry for posting a wrong question Loading multiple files!!
As per my understanding only a standard Dat file can be compared with one single dat file.Because Eacg dat file will be containing its own values. So multiple files cannot be compared.
Am assuming dat files containing time(s) and acceleration values(g). G value for each file differs.
Thanku!!
Solved!
Go to Solution.

Hi Rash.patel,
I'm still not sure I follow you. When you say "Dat" file, do you mean the DIAdem 8.x standard file with the *.dat header and usuall a *.r64 binary file or two that it references, or do you mean some other specific data file with the extension *.dat or do you just mean a generic data file?
DIAdem can certainly load multiple files into the Data Portal at the same time, so you must be referring to either a limitation of the "*.Dat" file you're talking about or correcting yourself that all the data you want to compare turns out to be in one "Dat" file.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Load into single target table frm multiple source table in single interfac

Hi
I have four source table and a single target table.
I need to move data from either of these tables into a target table , and we have to decide the source table based on user input.
Example :
Lets say there are four tables A,B,C,D and one target table T.
If user input says A
then the data from table A will move to table T
And again , if the user says table C then data from table C will move to table T.
And we have to create only one interface for achieving this in oracle Data Integrator ( ODI ).
You can take assumptions in source and target table.

Hi ,
In ODI 11g , there are new feature callled dataset. It allows to use UNION , MINUS etc.
Google it , you will get many tutorials on Dataset. check the link
http://www.rittmanmead.com/2011/06/odi-11g-new-mapping-and-interface-features-part-1/
In your case , you can provide filter conditions on your tables i.e.
Say My target table is EMPLOYEE , My source tables are EMPLOYEE and DEPARTMENT
INSERT INTO EMPLOYEE(CUSTOMER_ID , CUSTOMER_NAME) SELECT CUSTOMER_ID , CUSTOMER_NAME from employee where 'EMPLOYEE' = :EMP
UNION DEPARTMENT_ID , DEPARTMENT_NAME from departments where 'DEPARTMENT' = :EMP ;
Just pasted the Screenshots on following page : http://oracoholic.blogspot.in/ . Have a look
Edited by: user8427112 on Jan 8, 2013 11:04 AM

Loading XML file into DB Table

Hi
I m quite new to the loading XML file into database table.
It will be great if anyone could guide me to through.
Now,
i have an XML file which has to be loaded into the DB table.
what are the steps involved in doing this. How do i go from here ??
your help is greatly appriciated ???
Thank you so much!!
-Shashi

OK - Although you really should read the XMLDB FAQ on this forum, here is some sample code of ONE of the ways of doing it
(there are multiple ways - and this is not the most simple one)
Based on Oracle 11gR1
-- sqlplus /nolog
clear screen
set termout on
set feed on
set lines 40
set long 10000000
set serveroutput on
set lines 100
set echo on
connect / as sysdba
col filename for a80
col xml      for a80
-- Create schema “OTN”
drop user OTN cascade;
purge dba_recyclebin;
create user OTN identified by OTN;
grant dba, xdbadmin to OTN;
EXECUTE dbms_java.grant_permission( 'OTN', 'java.io.FilePermission','G:\OTN\xmlstore','read' );
prompt pause
pause
clear screen
-- Create directory
connect OTN/OTN;
show user
drop directory OTN_USE_CASE;
CREATE directory OTN_USE_CASE AS 'G:\OTN\xmlstore';
SELECT extract((XMLTYPE(bfilename('OTN_USE_CASE','ABANDA-20030407215829881GMT.xml'),NLS_CHARSET_ID('AL32UTF8'))),'*') AS "XML"
from   dual;
prompt pause
pause
clear screen
-- Directory Listing - Tom Kyte
create global temporary table DIR_LIST
( filename varchar2(255) )
on commit delete rows
create or replace
and compile java source named "DirList"
as
import java.io.*;
import java.sql.*;
public class DirList
{public static void getList(String directory)
                   throws SQLException
{   File path = new File( directory );
    String[] list = path.list();
    String element;
    for(int i = 0; i < list.length; i++)
    {   element = list;
#sql { INSERT INTO DIR_LIST (FILENAME)
VALUES (:element) };
create or replace procedure get_dir_list( p_directory in varchar2 )
as language java
name 'DirList.getList( java.lang.String )';
prompt pause
pause
clear screen
-- The content of the global temporary table
exec get_dir_list( 'G:\OTN\xmlstore' );
select * from dir_list;
-- "COMMIT" will clear / truncate the global temporary table...
prompt pause
pause
clear screen
-- Combined: Reading XML content from multiple XML files
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
select * from dir_list where filename like '%.xml'
and rownum <= 10;
prompt pause
pause
clear screen
select extract((XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8'))),'*') AS "XML"
from dir_list dl
where dl.filename like '%.xml' and rownum <= 2;
prompt pause
pause
clear screen
-- If you can select it you can insert it...
-- drop table OTN_xml_store purge;
create table OTN_xml_store of xmltype
xmltype store as binary xml
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
set time on timing on
insert into OTN_xml_store
select XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8')) AS "XML"
from dir_list dl
where dl.filename like '%.xml';
set time off timing off
commit;
select count(*) from OTN_xml_store;
prompt pause
pause
clear screen
-- If you can select it you can create resources and files
set time on timing on
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
select count(*) from dir_list where filename like '%.xml';
set serveroutput on size 10000
DECLARE
XMLdoc XMLType;
res BOOLEAN;
v_foldername varchar2(4000) := '/public/OTN/';
cursor c1
is
select dl.filename FNAME
, XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8')) XMLCONTENT
from dir_list dl
where dl.filename like '%.xml'
and rownum <= 100;
BEGIN
-- Create XDB repository Folder
if (dbms_xdb.existsResource(v_foldername))
then
dbms_xdb.deleteResource(v_foldername,dbms_xdb.DELETE_RECURSIVE_FORCE);
end if;
res:=DBMS_XDB.createFolder(v_foldername);
-- Create XML files in the XDB Repository
for r1 in c1
loop
if (DBMS_XDB.CREATERESOURCE(v_foldername||r1.fname, r1.xmlcontent))
then
dbms_output.put_line(v_foldername||r1.fname);
null;
else
dbms_output.put_line('Loop Exception :'||sqlerrm);
end if;
end loop;
EXCEPTION WHEN OTHERS THEN
dbms_output.put_line('Others Exception: '||sqlerrm);
END;
set time off timing off
commit;
prompt pause
pause
clear screen
-- FTP and HTTP
clear screen
prompt
prompt *** FTP - Demo ***
prompt
prompt pause
pause
host ftp
-- open localhost 2100
-- user OTN OTN
-- cd public
-- cd OTN
-- ls
-- bye
clear screen
prompt
prompt *** Microsoft Internet Explorer - Demo ***
prompt
prompt pause
pause
host "C:\Program Files\Internet Explorer\IEXPLORE.EXE" http://OTN:OTN@localhost:8080/public/OTN/
prompt pause
pause
-- Accessing the XDB Repository content via Resource View
-- Selecting content from a resource via XBDUriType
clear screen
prompt set long 300
set long 300
prompt Relative Path - (path)
SELECT path(1) as filename
FROM RESOURCE_VIEW
WHERE under_path(RES, '/public/OTN', 1) = 1
and rownum <= 10
prompt pause
pause
clear screen
prompt Absolute Path - (any_path)
select xdburitype(any_path).getClob() as xml
FROM RESOURCE_VIEW
WHERE under_path(RES, '/public/OTN', 1) = 1
and rownum <= 1;
prompt pause
pause
-- CLEANUP ENVIRONMENT
clear screen
prompt
prompt >>>>> Clean UP !!! <<<<<<
prompt
prompt Cleanup environment and drop user...!!!
prompt
pause
clear screen
conn / as sysdba
alter session set current_schema=OTN;
begin
dbms_xdb.deleteResource('/public/OTN',dbms_xdb.DELETE_RECURSIVE_FORCE);
commit;
end;
alter session set current_schema=sys;
drop user OTN cascade;
Based on http://www.liberidu.com/blog/?p=1053

How to delete the data loaded into MySQL target table using Scripts

Hi Experts
I created a Job with a validation transformation. If the Validation was failed the data passed the validation will be loaded into Pass table and the data failed will be loaded into failed table.
My requirement was if the data was loaded into Failed database table then i have to delete the data loaded into the Passed table using Script.
But in the script i have written the code as
sql('database','delete from <tablename>');
but as it is an SQL Query execution it is rising exception for the query.
How can i delete the data loaded into MySQL Target table using scripts.
Please guide me for this error
Thanks in Advance
PrasannaKumar

Hi Dirk Venken
I got the Solution, the mistake i did was the query is not correct regarding MySQL.
sql('MySQL', 'truncate world.customer_salesfact_details')
error query
sql('MySQL', 'delete table world.customer_salesfact_details')
Thanks for your concern
PrasannaKumar

Loading an Excel file into a Z-Table

Hi Gurus,
Can somebody guide me how to load an excel file into a Z-Table.

Hi,
You need to write a ABAP code for this....
The following is the code for loading data into an internal table:
types: begin of ttab,
       rec(1000) type c,
       end of ttab.
types: begin of tdat,
       fld1(10) type c,
       fld2(10) type c,
       fld3(10) type c,
       end of tdat.
data: itab type table of ttab with header line.
data: idat type table of tdat with header line.
data: file_str type string.
parameters: p_file type localfile.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
       exporting
            static    = 'X'
       changing
            file_name = p_file.
start-of-selection.
file_str = p_file.
call function 'GUI_UPLOAD'
       exporting
            filename                = file_str
       tables
            data_tab                = itab
       exceptions
            file_open_error         = 1
            file_read_error         = 2
            no_batch                = 3
            gui_refuse_filetransfer = 4
            invalid_type            = 5
            no_authority            = 6
            unknown_error           = 7
            bad_data_format         = 8
            header_not_allowed      = 9
            separator_not_allowed   = 10
            header_too_long         = 11
            unknown_dp_error        = 12
            access_denied           = 13
            dp_out_of_memory        = 14
            disk_full               = 15
            dp_timeout              = 16
            others                  = 17.
delete itab index 1.
loop at itab.
    clear idat.
    split itab-rec at cl_abap_char_utilities=>horizontal_tab
                          into idat-fld1
                               idat-fld2
                               idat-fld3.
    append idat.
endloop.
loop at idat.
    write:/ idat-fld1, idat-fld2, idat-fld3.
endloop.
From this internal store it onto the database.....
Sharma one more thing you must have posted this question in ABAP fourum for better results....
Hope it helps,
Thanks,
Happy Life,
Aravind

Loading XML files into Database table

Loading XML files into Database table
Hi I have some XML files say 100 files in a virtual directory created using "Create or replace directory command" and those files need to be loaded into a table having a column of XMLTYPE. 1)How to load that using Oracle provided procedures/packages

Check out the Oracle XDB Developer's Guide, Chapter 3. There is an example of using BFileName function to load the xml files from a directory object created using create or replace directory. It works really well.
Ben

Loading multiple files with SQL Loader

Hello.
I will appreciate your recommendation about the way to load multiple files (to multiple tables) using SQL Loader with only one Control file.
file1 to load to Table1, file2 to load to Table2 etc.
How the Control file should look like?
I was looking on Web, but didn't find exactly what I need.
Thanks!

Ctl File : myctl.ctl
---------- Start ---------
LOAD DATA
INFILE 'F:\sqlldr\abc1.dat'
INFILE 'F:\sqlldr\abc2.dat'
INTO TABLE hdfc1
(TRANS_DATE CHAR,
NARRATION CHAR,
VALUE_DATE CHAR,
DEBIT_AMOUNT INTEGER,
CREDIT_AMOUNT INTEGER,
CHQ_REF_NUMBER CHAR,
CLOSING_BALANCE CHAR)
INTO TABLE hdfc2
(TRANS_DATE CHAR,
NARRATION CHAR,
VALUE_DATE CHAR,
DEBIT_AMOUNT INTEGER,
CREDIT_AMOUNT INTEGER,
CHQ_REF_NUMBER CHAR,
CLOSING_BALANCE CHAR)
-----------End-----------
Sqlldr Command
sqlldr scott/tiger@dbtalk control=F:\sqlldr\myctl.ctl log=F:\sqlldr\ddl_file1.txt
Regards,
Abu

Error while loading XML files into scott user

Hi All,
I'm new to xml files. I need to load xml files into database through OWB.
I have xml file in my local machine & am trying to load into table PO of Scott. Scott is registered as repository user.
Followed same steps as specified in userguide.
But, when executing the procedure ( in two ways one as just table name, and other as user.table name) it is showing the below error:
Procedure is:(1)--with username.tablename
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">scott.PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object SCOTT.PO.
Base exception: ORA-01031: insufficient privileges
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at "SCOTT.SAMPLE1", line 3
ORA-06512: at line 1
Procedure is:(2) with out username
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object PO.
Base exception: ORA-00942: table or view does not exist
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at line 2
xml file:
<ROWSET>
<ROW>
<ID>100</ID>
<ORDER_DATE>2000.12.20</ORDER_DATE>
<SHIPTO_NAME>Adrian Howard</SHIPTO_NAME>
<SHIPTO_STREET>500 Marine World Parkway</SHIPTO_STREET>
<SHIPTO_CITY>Redwood City</SHIPTO_CITY>
<SHIPTO_STATE>CA</SHIPTO_STATE>
<SHIPTO_ZIP>94065</SHIPTO_ZIP>
</ROW>
</ROWSET>
Note: Everything works fine if I create PO table in OWBSYS user and execute the procedurein OWBSYS user. OWBSYS.PO table will be loaded.
What privileges are missing, what shouldI do if I want to execute the procedure from scott user and load the table of scott.
Thanks in advance for the help.
Regards,
Joshna

Hi Joshna,
Please follow below steps to load xml file to oracle database.
1.First connect to owb (Design Center) through your repository owner user (ex : REP_OWNER).
2. Import WB_XML_LOAD procedure . and exit to repository owner.
3. connect to owb design center through your repository user (ex : REP_USER)
Create New mapping and drag one Constant Operator and create one attribute, paste / edit following code
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>E:\SOURCE\emp.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target truncateFirst = "FALSE" dateFormat="yyyy.MM.dd">rep_user.emp</target>'||
'</targets>'||
'</OWBXMLRuntime>'
4. Drag pre mapping operator and select WB_XML_LOAD procedure
5. Connect Constant Operator attribute to pre mapping operator.
6. Drag two dummy tables and connect source to target. (ex : drag t1 (table) tab two times and connect.
7. Validate and deploy the mapping.
8. grant necessary grant command to rep_owner user to rep_user user.
(Note : target truncateFirst = "FALSE" by default truncate the table. So you have to give grant privileges
To rep_user , select ,insert, delete privileges.
9. Execute the mapping , and check EMP table. (Note : before loading EMP table delete all records ).
10 . If you want more description please go through the below link
http://download.oracle.com/docs/html/A95931_01/apf.htm
Regards
Venkat

Loading multiple files into a target table parallely

Similar Messages

Maybe you are looking for