Loading multiple forms

I am using SharePoint 2010 to create requests and to edit them in particular views. I have built both forms with Info Path. I loaded the new request form and everything seems to be working
fine. I loaded the edit form and when I click on the edit icon I get an error, then it reverts back to the request form. I am not sure how to tell if the edit form is loaded and or work properly. I have used SharePoint Designer for most of the build and loading
of my lists and forms. Please any help would be appreciated.

Hi,
Please provide more details about the error message.
You can also check ULS log to see if anything unexpected occurred when clicking on the edit icon.
For SharePoint 2010, by default, ULS log locates in
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS"
You can check the ULS log by following these links:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Best Regards
Dennis Guo
TechNet Community Support

Similar Messages

Loading multiple forms in single jsp

Hi,
My jsp page has multiple forms (one form for each table which has specific info). So assume it has 3 tables, so 3 forms.
I need to load all the form when the page is loaded.
code:
<FORM name=form1 action="/action1" method=post></FORM>
<FORM name=form2 action="/action2" method=post></FORM>
<FORM name=form3 action="/action3" method=post></FORM>
So if I need to load all the forms, how should I proceed. Also please note each form has its own form class and action class.
For e.g. Assume Page A (From Page A I am coming to this form page via a hyperlink and there is no action class in between) calls the page with 3 forms and I need to display all the values in the 3 forms. So how can I call the action classes for each of the 3 forms.
So when and how will the action1, action2, action3 called?
Any help would be greatly appreciated.
Thanks.

Thanks for your reply. I understand only one form would be submitted. Its ok.
But the thing I am looking at is loading the multiple form values at a time.
I have page A, Page B (where I need to display multiple form values. Actually this page has 3 tables, and each table is one form e.g. one table has all the name values, one table has all address values. So each has different actions).
I am calling Page B via a hyperlink from Page A. Since I need to use hyperlink, there is no way (atleast I dont know) of using action class or anything.
Now, my question is how do I populate the values for all these 3 forms.
Any help would be great.
Thanks.

Loading Multiple Flat File around 80+

Hi,
Loading multiple flat file in to BI system.
My issue: I got a scenerio of loading multiple i.e., 80+ flat file into BI system every month and my client want it to be done through process chain r automation with out manual intervention.
Can any one suggest me how can i achiev this one.
Regards,
Prabhakar.

Hi All,
We have developed a logic to upload multiple flat file at a time i.e., .CSV file. Please find below is the logic regarding that routine.
*+ program filename_routine.
Global code
$$ begin of global - insert your declaration only below this line -
Enter here global variables and type declarations
as well as additional form routines, which you may call from the
main routine COMPUTE_FLAT_FILE_FILENAME below
data : v_filename type string.
data : v_foldername type string.
data : v_uploadfile type string.
data: v_download_file type string.
data : v_ext(4) type c.
data : v_FILE_EXISTS type c.
data : v_file type DXFILE-FILENAME.
data : v_count(3) type c.
data : v_length type i.
TYPES: BEGIN OF TY_file,
        LINE(900),
      END OF TY_file.
DATA: GIT_file TYPE TABLE OF TY_file.
$$ end of global - insert your declaration only before this line   -
form compute_flat_file_filename
using    p_infopackage type rslogdpid
           p_datasource   type rsoltpsourcer
           p_logsys       type rsslogsys
changing p_filename     type RSFILENM
           p_subrc        like sy-subrc.
$$ begin of routine - insert your code only below this line        -
This routine will be called by the adapter,
when the infopackage is executed.
v_count = 1.
*---- As per the folder location of the files & system we have to change
*the path fo the folder in the below variable i.e., 'c:\............
v_foldername =
'C:\Documents and Settings\Prabhakar-HP\Desktop\test\'.
*---- As per the Prefix of the files like 'CSI_01_..' we have change the
*prefix if required in the below variable i.e., 'CSI_01_..', IF REQUIRED
*OR IF WANT TO CHANGE THE PREFIX TO SOME OTHER.
v_filename = 'CSI_01_'.
v_ext = '.csv'.
condense v_count.
concatenate   v_foldername
                v_filename
                v_count
                v_ext       into v_uploadfile.
v_file = v_uploadfile.
CALL FUNCTION 'DX_FILE_EXISTENCE_CHECK'
    EXPORTING
      FILENAME       = v_file
      PC             = 'X'
    IMPORTING
      FILE_EXISTS    = v_FILE_EXISTS
    EXCEPTIONS
      RFC_ERROR      = 1
      FRONTEND_ERROR = 2
      NO_AUTHORITY   = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
while v_FILE_EXISTS = 'X'.
    v_file = v_uploadfile.
    CALL FUNCTION 'DX_FILE_EXISTENCE_CHECK'
      EXPORTING
        FILENAME       = v_file
        PC             = 'X'
      IMPORTING
        FILE_EXISTS    = v_FILE_EXISTS
      EXCEPTIONS
        RFC_ERROR      = 1
        FRONTEND_ERROR = 2
        NO_AUTHORITY   = 3
        OTHERS         = 4.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    if v_file_exists = 'X'.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                = v_uploadfile
          FILETYPE                = 'ASC'
          HAS_FIELD_SEPARATOR     = 'X'
        TABLES
          DATA_TAB                = GIT_file
        EXCEPTIONS
          FILE_OPEN_ERROR         = 1
          FILE_READ_ERROR         = 2
          NO_BATCH                = 3
          GUI_REFUSE_FILETRANSFER = 4
          INVALID_TYPE            = 5
          NO_AUTHORITY            = 6
          UNKNOWN_ERROR           = 7
          BAD_DATA_FORMAT         = 8
          HEADER_NOT_ALLOWED      = 9
          SEPARATOR_NOT_ALLOWED   = 10
          HEADER_TOO_LONG         = 11
          UNKNOWN_DP_ERROR        = 12
          ACCESS_DENIED           = 13
          DP_OUT_OF_MEMORY        = 14
          DISK_FULL               = 15
          DP_TIMEOUT              = 16
          OTHERS                  = 17.
      IF SY-SUBRC <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      elseif sy-subrc = 0.
**----- As per the REQUIRMENT, want to change the down loading file
*path means we have to change the path in the below variable i.e.,
*'c:\.......
v_download_file =
'C:\Documents and Settings\Prabhakar-HP\Desktop\test\satheesh.CSV'.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            FILENAME                = v_download_file
            FILETYPE                = 'ASC'
            APPEND                  = 'X'
          TABLES
            DATA_TAB                = git_file
          EXCEPTIONS
            FILE_WRITE_ERROR        = 1
            NO_BATCH                = 2
            GUI_REFUSE_FILETRANSFER = 3
            INVALID_TYPE            = 4
            NO_AUTHORITY            = 5
            UNKNOWN_ERROR           = 6
            HEADER_NOT_ALLOWED      = 7
            SEPARATOR_NOT_ALLOWED   = 8
            FILESIZE_NOT_ALLOWED    = 9
            HEADER_TOO_LONG         = 10
            DP_ERROR_CREATE         = 11
            DP_ERROR_SEND           = 12
            DP_ERROR_WRITE          = 13
            UNKNOWN_DP_ERROR        = 14
            ACCESS_DENIED           = 15
            DP_OUT_OF_MEMORY        = 16
            DISK_FULL               = 17
            DP_TIMEOUT              = 18
            FILE_NOT_FOUND          = 19
            DATAPROVIDER_EXCEPTION = 20
            CONTROL_FLUSH_ERROR     = 21
            OTHERS                  = 22.
        IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        refresh git_file.
      ENDIF.
    endif.
    if v_file_exists = 'X'.
      if p_subrc = 0.
        v_count = v_count + 1.
        condense v_count.
        concatenate
             v_foldername
             v_filename
             v_count
             v_ext into v_uploadfile.
      endif.
    else.
    endif.
endwhile.
v_uploadfile = v_download_file.
p_filename = v_uploadfile.
p_subrc = 0.
$$ end of routine - insert your code only before this line         -
endform. +*
Reagrds,
Prabhakar.

Multiple Forms in a Flash Document and Posting Using ASP

Hello everyone!
I have some what of a dilemma on my hands. I am creating
multiple forms in one document using Flash and need them to post
using ASP script. I have been researching this for the last six
days, and I have had NO luck. I have noticed that all the
information that I have found is for one form, not more than one.
What I have so far is the Flash document, with 4 forms. The
basic idea is that a user chooses from a drop down menu (the
combobox) a location, and depending on the location chosen, it
takes the user to another frame in the flash document. The forms
(all their own movie clip) contains a name field, a department
field, and either a manager name a userID field or an employee
number as well as the basic buttons for submitting the form or
resetting the form.
So far what I have working is the drop down menu (combobox)
taking me to the proper frame and it shows the appropriate form.
The reset button clearing the form (deleting any information that I
have imputed into the input fields), but I have absolutely NO idea
how to get the submit button to work (I did manage to get it to
send me a message if there was nothing in one of the input fields),
and NO idea how to get the information to the ASP file.
Where there are 4 forms do each of them have to have their
own ASP file attached to them, or can I use one?
If anyone knows a site that deals with multiple forms in one
SWF and posts using ASP that would be greatly appreciated, or if
you know some actionscript that could be helpful.
Thank you all in advance.

That would be part of my problem, I really don't know ASP,
and I am flying by the seat of my pants.
The current script I have for the ASP file is:
<% @Language = "VBScript" %>
<%
Option explicit
Dim strfullName
Dim strdeptName
Dim strmanagerName
Dim strobjeemail
Dim strlocation
strfullName.Request.Form("fullName_txt")
strdeptName.Request.Form("deptName_txt")
strmanagerName.Request.Form("managerName_txt")
strlocation.Request.Form("locationName")
Set strobjemail = CreateObject("CDO.Message")
strobjemail.From = "[email protected]"
strobjemail.To = "[email protected]"
strobjemail.Subject = "Program from " + strlocation
strobjemail.Body = "This user has completed this progrmam
from " + strlocation & Chr(13) & Chr(10) & "Name: " +
strfullName & Chr(13) & Chr(10) & "Department: " +
strdeptName & Chr(13) & Chr(10) & + "Manager: " +
strmanagerName
strobjemail.Send
Set strobjemail=nothing
%>
The AS code that I have so far is:
function formValidationChecks(){
if (fullName_txt.length==0){
status_txt.text = "Please enter your Name";
else if (deptName_txt.length==0){
status_txt.text = "Please enter your Department";
else if (managerName_txt.length==0){
status_txt.text = "Please enter your Manager";
else {
status_txt.text = "Thank You!";
variables.fullName_txt = fullName_txt.text;
variables.deptName_txt = deptName_txt.text;
variables.managerName_txt = managerName_txt.text;
varLoader.load(varSend);
trace("-----");
trace("Name: "+fullName_txt.text);
trace("Department: "+deptName_txt.text);
trace("Manager: "+managerName_txt.text);
trace("Form validated");
submit_btn.onRelease = function(){
status_txt.text = "";
if(formValidationChecks()){
var lv = new LoadVars();
lv.fullName_txt = form.fullName_txt.text;
lv.deptName_txt = form.deptName_txt.text;
lv.managerName_txt = form.managerName_txt.text;
lv.sendAndLoad("mail.asp", lv, "POST");
reset_btn.onRelease = function()
fullName_txt.text = "";
deptName_txt.text = "";
managerName_txt.text = "";
So far my reset button clears everything, and the submit
button is tracing the content in the form fields, but it's not even
grabbing the asp page.
Any suggestions? Even pages that have tutorials that are in
the form of a video.
Thanks

Load Balancing Forms Services with an effective healthcheck

I am in the process of configuring two forms 11.1.2 servers running with weblogic 10.3.5 with multiple forms applications clustered across both physical servers. We are looking to load balance to the various forms applications using a hardware load balancer. Can anyone comment on their experience with setting up effective application healthchecks using either hardware or software load balancers?
For example say that we have 3 applications clustered across 2 servers with the following
URLs:
http://server01:7777/forms/frmservlet?config=myapp1
http://server01:7777/forms/frmservlet?config=myapp2
http://server01:7777/forms/frmservlet?config=myapp3
http://server02:7777/forms/frmservlet?config=myapp1
http://server02:7777/forms/frmservlet?config=myapp2
http://server02:7777/forms/frmservlet?config=myapp3
We would need a checking mechanism on the load balancer that could tell if myapp2 was down on say server01 and therefore block traffic to that application yet keep traffic open for the other 2 apps on the same server.
A specific difficulty with forms is that when the database behind the application is down forms services will return an error message within a displayed error form. From the load balancer's point of view the forms services are "up". We need to find a way of detecting that the application is actually available and not just that the forms services themselves are available. To detect that the forms services are available we might normally use the status check:
http://server01:7777/forms/frmservlet?ifcmd=status
however this will only tell use the availability of the forms services on a physical server and not whether any actual applications are available.
I am aware that f5 do a BIGIP offering that includes some Oracle Forms specific components. Can anyone comment on how they have setup Oracle Forms healthchecks using various load balancing methods. In particular if a load balancer is limited to using WGET commands to check HTTP returned content is there a way of checking a forms application's availability and if not how have other people achieved an effective healthcheck?
Many thanks,
Philippe

Did you ever Get this to work?
I am having some problems trying to load balance with Oracle Forms, Discover and reports Oracle Application Server Release 10g (9.0.4.0.2) and I was wondering if you could help. Has any one ever got this to work consistently? We are an ERP product written mostly in forms (904) and are trying to implement are largest customer there performance issue so we need the load balancing to work. Will also accept other recommendation as cost effective as solutions.
Site 1:
A: SERVER
     Host as1.xyzco.local
     Version 10.1.2.0.2
     Installation Type Identity Management and Metadata Repository
     Oracle Home E:\oracle\inf_1012
     Farm as1db.xyzco.net
o     HTTP_Server
o     Internet Directory
o     OC4J_SECURITY
o     Single Sign-On:orasso
o     Management
B SERVER
     Host as2. xyzco.local
     Version 9.0.4.0.2
     Installation Type Business Intelligence and Forms
     Oracle Home E:\oracle\mid_904
     Farm as2db. xyzco.net
o     Discoverer
o     Forms
o     home
o     HTTP_Server
o     OC4J_BI_Forms
o     Reports Server
o     Web Cache
o     Management
C SERVER
     Host as3. xyzco.local
     Version 9.0.4.0.2
     Installation Type Business Intelligence and Forms Discoverer and Reports
     Oracle Home E:\oracle\mid_904
     Farm as2db. xyzco.net
o      Discoverer
o     Forms
o     home
o     HTTP_Server
o     OC4J_BI_Forms
o     Reports Server
o     Web Cache
o     Management
All servers Are:
     Windows 2003 Standard Server with current service packs
     Xeon Dual Processor with 4GB ram
     Raid 0 drives 2 for OS and 2 for Oracle
Daniel Brody
[email protected]

Using URLLoader to send and load multiple xml nodes

I am trying to use the URLLoader class to send and load
multiple chunks of xml to a php script. Essentially I have the
following bit of XML:
<pages>
<page>page children here</page>
<page>more page children here</page>
<page>even more page children here</page>
</pages>
I'm using e4x to loop through the XML and isolate each page
node. I then want to send each node to a php script to be written
to a .xml file on the server.
I've tried inserting the URLLoader.load method within the
loop but it only sends the last iteration. Do I have to create a
new URLLoader instance for each iteration and if so is there a way
to dynamically set the instance names?
I'm new to 3.0 and have had success doing this in 2.0. I
mostly want to get it right and in good form.
Thanks for any help!

The URLLoader class allows you to send and load data in the
same pass. As help suggests...sendToURL Sends a URL request to a
server, but ignores any response. To examine the server response,
use the URLLoader.load() method instead. The send and load works
fine, my issue is with needing to send multiple xml chunks using a
loop.
Here's the basics of the code I'm using. I was thinking that
the try{....} section could be put in a loop attempting to send
multiple items to the PHP page but only the last iteration is
actually sent. I know I'm making a fundamental error here but need
direction.
var urlLoader:URLLoader = new URLLoader();
urlLoader.dataFormat = URLLoaderDataFormat.VARIABLES;
urlLoader.addEventListener(Event.COMPLETE, handleComplete);
urlLoader.addEventListener(IOErrorEvent.IO_ERROR,
ioErrorHandler);
var variables:URLVariables = new URLVariables();
variables.xml = "<some_node>some
child</some_node>";
var request:URLRequest = new
URLRequest("sendAndLoadXML.php");
request.method = URLRequestMethod.POST;
request.data = variables;
for each(blah){
try {
sendToURL(request);
} catch (error:Error) {
trace(\n***\nUnable to load requested document." + error);
}

Problem caching EPS files with multiple forms

I'm attempting to use multiple forms for caching 1 or more EPS Files in a postscript document. I've followed Technical Note #5144 to the letter and use the "array of strings" method since I have to support Postscript level 2 printers. The arrays appear to be loaded with strings representing the EPS as expected.
If I use only a single form with 1 EPS it works great. I can execute the form anywhere on the page as many times as I want. If I add a 2nd form to the page it causes strange behavior. The 2nd form is drawn regardless of if I execute it or not. Even if I comment out ALL execform calls it still shows the 2nd form (the page should be blank).
I've boiled down the code to a faily simple example. I took out all the binary EPSF content for each form and instead have each form draw a circle.
If working write this postscript should be drawing a smiley face using 4 circles.
Should look something like this:
0 0
0
<> <--- This should show like a stretched out circle.
However, the mouth is actually drawn very small down in the lower left hand corner of the page. If you change the order of the forms definition then the mouth is drawn correctly but not the eyes and nose.
The forms as named EPSForm-Circle and EPSForm-Circle2
Here's the postscript
%!PS-Adobe-3.0
%%BoundingBox: 0 612 792 0
%%LanguageLevel: 2
%%Pages: 1
%%BeginProlog
%%BeginResource: procset forms_ops 1.0 0
userdict /forms_ops 10 dict dup begin put
/BeginEPSF { %def
userdict begin % Push userdict on dict stack
/b4_Inc_state save def % Save state for cleanup
/dict_count countdictstack def % Count objects on dict stack
/op_count count 1 sub def % Count objects on operand stack
/showpage { } def % Redefine showpage, { } = null proc
} bind def
/EndEPSF { %def
count op_count sub {pop} repeat % Clean up stacks
countdictstack dict_count sub {end} repeat
b4_Inc_state restore
end % userdict
} bind def
/buffer 16000 string def
/inputFile currentfile 0 (% $$EPS_EOD_Marker$$) /SubFileDecode filter def
/readdata { % array readdata --
1 { % put counter on stack
% stack: array counter
2 copy % stack: array counter array counter
inputFile buffer readstring % read contents of currentfile into buffer
% stack: array counter array counter string boolean
4 1 roll % put boolean indicating EOF lower on stack
16000 string copy % copy buffer string into new string
% stack: array counter boolean array counter newstring
put % put string into array
not {exit} if % if EOF has been reached, exit loop.
1 add % increment counter
} loop
% increment counter and place empty string in next position
1 add 2 copy () put pop
currentglobal true setglobal exch
0 1 array put % create an array for counter in global VM,
% so as not to be affected by save/restore calls in EPS file.
% place as first element of string array.
setglobal % restore previously set value
} bind def
currentdict readonly pop end
%%EndResource
%%EndProlog
%%BeginSetup
% set MaxFormItem to be equivalent to MaxFormCache
<< /MaxFormItem currentsystemparams /MaxFormCache get >> setuserparams
% make forms procset available
forms_ops begin
userdict begin
% setup 1st circle form resource
%%BeginResource: form EPSForm-Circle
/EPSForm-Circle
10 dict begin
/FormType 1 def
/BBox [0 0 100 100] def
/Matrix [1 0 0 1 0 0] def
/EPSArray 3 array def
/AcquisitionProc {
EPSArray dup 0 get dup 0 get
dup 3 1 roll
1 add 0 exch put
get
} bind def
/PaintProc {

The postscript was cut off on 1st post. Here is the remainder:
begin
BeginEPSF
EPSArray 0 get 0 1 put
//AcquisitionProc 0 () /SubFileDecode filter
cvx exec
EndEPSF
end
} bind def
currentdict end def % EPSForm-Circle
EPSForm-Circle /EPSArray get
readdata
%%BeginDocument: (Circle.eps)
50 50 3 0 360 arc closepath stroke
%%EndDocument
% $$EPS_EOD_Marker$$
%%EndResource
% setup 2nd circle form resource
%%BeginResource: form EPSForm-Circle2
/EPSForm-Circle2
10 dict begin
/FormType 1 def
/BBox [0 0 100 100] def
/Matrix [1 0 0 1 0 0] def
/EPSArray 3 array def
/AcquisitionProc {
EPSArray dup 0 get dup 0 get
dup 3 1 roll
1 add 0 exch put
get
} bind def
/PaintProc {
begin
BeginEPSF
EPSArray 0 get 0 1 put
//AcquisitionProc 0 () /SubFileDecode filter
cvx exec
EndEPSF
end
} bind def
currentdict end def % EPSForm-Circle2
EPSForm-Circle2 /EPSArray get
readdata
%%BeginDocument: (Circle2.eps)
50 50 3 0 360 arc closepath stroke
%%EndDocument
% $$EPS_EOD_Marker$$
%%EndResource
%%EndSetup
%%Page: 1 1
%%BeginPageSetup
/pgsave save def
%%EndPageSetup
% Draw left eyeball using Circle form
gsave
-350 100 translate
10.0 10.0 scale
EPSForm-Circle execform
grestore
% Draw right eyeball using Circle form
gsave
-100 100 translate
10.0 10.0 scale
EPSForm-Circle execform
grestore
% Draw nose using Circle form
gsave
-225 -500 translate
10.0 20.0 scale
EPSForm-Circle execform
grestore
% Draw mouth using Circle 2 form.
gsave
-720 -200 translate
20.0 10.0 scale
EPSForm-Circle2 execform
grestore
showpage
/pgsave load restore
%%PageTrailer
end % userdict
end % forms_ops
%%EOF

Need help - Loading Multiple instance of the same image

Hi guys,
I have been trying for days now, to get this working but i'm not able to do so, i have been trying to get actionscript to load multiple instance of an image file using a for loop.
Would anyone be able to enlighten me on this? the other functions are located on a seperate actionscript file.
many thanks
part of the code is as follows: (it works if i use the graphic class)
function makeRoad():void{
    var row:int = 0;//the current row we're working on
    var block;//this will act as the block that we're placing down
    for(var i:int=0;i<lvlArray.length;i++){//creating a loop that'll go through the level array
        if(lvlArray[i] == 0){//if the current index is set to 0
            block = new EmptyBlock();//create a gray empty block
            block.graphics.beginFill(0x333333);
            block.graphics.drawRect(0,0,25,25);
            block.graphics.endFill();
            addChild(block);
            //and set the coordinates to be relative to the place in the array
            block.x= (i-row*22)*25;
            block.y = row*25;
            } else if(lvlArray[i] == 1){//if there is supposed to be a row
            //just add a box that will be a darker color and won't have any actions
            block = new Shape();
            block.graphics.beginFill(0x111111);
            block.graphics.drawRect(0,0,25,25);
            block.graphics.endFill();
            block.x= (i-row*22)*25;
            block.y = row*25;
            roadHolder.addChild(block);//add it to the roadHolder
        } else if(lvlArray[i] is String){//if it's a string, meaning a special block
            //then create a special block
            block = new DirectBlock(lvlArray[i],(i-row*22)*25,row*25);
            addChild(block);
        for(var c:int = 1;c<=16;c++){
            if(i == c*22-1){
                //if 22 columns have gone by, then we move onto the next row
                row++;

@Kalisto - i don't think that is the real issue here since we cannot see what is in the DirectBlock class and the OP has not mentioned any compiler errors.
Desmond - it appears as though you are constructing this in the form of a 'grid' - correct? but the problem i believe is that the positioning is not being determined properly - to do something like you want here (i think) you would use what known as a 'nested loop' - this means the 'outer' loop handles iteration of the 'rows' and an 'inner' loop handles the iteration of the columns. the way you have this set up above, you are attempting to use the 'row' value to position both the row and column - this wont work and it's likely that everything is getting 'stacked' on top of one another.
may want to structure things a bit more like this:
function makeRoad():void {
     var index:int = 0;
     for(var row=0; row<22; row++) {
          for(var col=0; col<22; col++) {
               index = (row*22)+col;
               if(lvlArray[index] == 0) createBlock(0x333333, col*25, row*25);
               if(lvlArray[index] == 1) createBlock(0x111111, col*25, row*25);
               if(lvlArray[index] is String) roadHolder.addChild( new DirectBlock(lvlArray[index], col*25, row*25) );
function createBlock(color, xp, yp):void {
     var block:Shape = new Shape();
     block.graphics.beginFill(color);
     block.graphics.drawRect(0,0,25,25);
     block.graphics.endFill();
     block.x = xp;
     block.y = yp;
     roadHolder.addChild(block);
note: i do not know how many 'rows' you intend to have and are stored in the array so the row<22 will need adjustment

How do I use edge commons composition loader to load multiple compositions with a next and back button?

I am working on an interactive book and have set up each page as a separate composition in edge.
I am using the edge commons JS library to load multiple compositions into a main composition.
You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

How to load multiple .wrl (VRML) files?

Hi all,
I need to load four components of a coffee table into the virtual universe, the four components are top, base, left leg and right leg. I use four parts not one whole single object because in this way when I change the size of this furniture, I can make the thickness of the edges fixed, which is a must. The four parts consist a table correctly in the design software TopSolid, but when I load the four .wrl ojbect files seperately in the application, they cannot compose a table correctly. I guess the reason is the four components have been resized and translated automatically in the VRML loader. I have reviewed the source code of the VRML loader and some related source code but not be able to find where the auto resize code is.
I have used four Wavefront .obj files instead to do another technical demonstration, if I disable the ObjectFile.RESIZE flag, and just scale the four parts by myself using the same scale factor, I can get a perfect coffee table, with every part in correct location. But my supervisor insist on using VRML .wrl files in our project.
I hope someone can give me some kind instructions or advises on how to do it in VRML97 loader (https://j3d-vrml97.dev.java.net/).
Any help will be highly appreciated.

Answered here : http://www.java.net/forum/topic/javadesktop/java-desktop-technologies/java-3d/trying-load-multiple-wrl-vrml-files-same

RetrorespectiveActivation of Multiple Form 16 in mid- of the financial year

Hi All,
We have mainatined TAN as per the company Code in feature 40ECC. Now we want to have multiple Form 16 if there is change in company Code of an employee for the financial year 2009.
We have not activated Multiple Form 16 Switch so far. Now in the last month of financial Year 2009 that in March'2010 (period 12/2009) we want to activate Multiple Form 16 switch from 01.04.2009. After activation Multiple form 16 Switch, we are planning to trigger retro for all employees from 01.04.2009.
But we are not very much sure what will be the impact of activating Multiple Form 16 switch now in the last period of the financial year.
Required your valuable inputs on this.
Thanks,
Ravinder

Hi,
Check whether multiple Form 16 switch is active or not.
In case this is active, then the Form 16 will be generated as under:
Company A - showing earnings from 01.04.08 to 31.12.08 only
Company B - showing earnings from 01.01.09 to 31.03.09 as current earnings and from 01.04.08 to 31.12.08 as income from previous employment.
In case multiple Form 16 is not active, then the Form 16 that you are getting is correct. However, in this case you need not print the Form 16 of company A. Only the Form 16 from the company code where the employee belongs to as on 31.03.2009 (i.e. last day of the FY) will be printed. And in this case the Form 16 will include complete earnings from 01.04.2008 to 31.03.2009 as current earnings.
Hope this clarifies your query.
VK

How top open multiple forms at the same time in HRMS menu

Hi,
When enabling "Close Other forms" in HRMS menu by excluding the function ‘Navigator: Disable Multiform’ Function in the Responsibility Definition (System Administrator -> Security -> Responsibility -> Define), mutliple forms works fine but I'am facing another error.
My problem is: when this option is enabled, I tried to run Payroll run request but it turned out that payroll list of values is returning empty values and I'am unable to select any payroll from list of values. the only way to do so is to remove back ‘Navigator: Disable Multiform’ Function from exclusion section in responsibility.
My requirment is: to have multiple form and payroll run list of values working at the same time
Thanks

Reason for this , if ur request is attached to more than 1 responsibility , i think this issue will come , we got same issue
we remove it from responsibility list , then it is working fine

How to pass a parameter from a report to multiple forms in the same page

Hi:
i have a report and a lot of forms in the same page. The fact is that i want to stablish a link over a filed in the report which would make some information appear in those forms so that information could be updated. For example: i have a report with company names. Over those names i want to put a link. When the link would be pressed the forms would reflect the information about that comany. Is this possible to be done? how can i do this or something similar?
Thanks.
Regards. Urko.

Please see post Re: session state security
It has been done for a single form in a page and can be extended to multiple forms as well.

Unable to load multiple files to Essbase using MaxL and wildcards

I have multiple data files to load:
Files:
Filename.txt
Filename_1.txt
Filename_2.txt
According to the following link, Essbase is able to load multiple files to BSO databases via MaxL by using wildcards:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
However, when I try to run the following I receive the following error:
MaxL:
import database MyApp.DB data from server text data_file "../../MyApp/Filename*.txt" using server rules_file "L_MyRule" on error append to "\\Server\Folder\L_MyRule.err";
Error:
ERROR - 1003027 - Unable to open file [DB01/oracleEPM/user_projects/epmsystem2/EssbaseServer/essbaseserver1/app/MyApp/DB/../../Filename*.txt].
ERROR - 1241101 - Unexpected Essbase error 1003027.
I can run the following fine without any problem, but this only deals with the first of several files, and I’d rather not hard-code multiple files since the number might vary in the future:
MaxL:
import database MyApp.DB data from server text data_file "../../MyApp/Filename.txt" using server rules_file "L_MyRule" on error append to "\\Server\Folder\L_MyRule.err";
Any ideas? And how about ASO databases?

JamesD wrote:
According to the following link, Essbase is able to load multiple files to BSO databases via MaxL by using wildcards:
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?launch.html
That is the tech ref for 11.1.2.2, are you on 11.1.2.2?
Import Data
11.1.2.2 - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?maxl_imp_data.html
11.1.2.1 - http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref_1112100/frameset.htm?maxl_imp_data.html
Cheers
John
http://john-goodwin.blogspot.com/

Generate and Print Preview Multiple Forms in a Single PDF

There have been other questions similar to this but none directly address my problem. We have the need to generate multple forms in a .pdf using Adobe interactive forms. We can generate the multiple forms, but the user has to click on each form to view. They want to have the forms in a single document that they can scroll through before printing. We can do this in SmartForms but need to do it in Adobe. Does anyone know how to generate multiple forms, either multiple copies of the same form or various forms, from an ABAP program into a single pdf that can be print previewed, in scrollable form, by the user?

I can describe it one more time, I think:))
You have multiple options, but only one "reasonable" within SAP.
You can call an external application (through command line etc.) to concatenate forms for you.
You can use iText as mentioned in the thread, and write yourself a "tool" which will concatenate the forms for you.
Both these "options" would not be acceptable for my clients, I name them to help you get the whole picture.
Then there is the third option: use a form for a single instance (template/ form A) and create a new form (form B), where you will use the A template:
- you need to: create a new interface where everything from the old interface is a row of the table (example: you have a form to print out the personal card of the employee, so in a new form you will need to use a table, where a row is an employee)
- you need to create a new form layout based on the new interface:
in this new layout you will paste the whole layout of the old form (A/ single instance) and wrap it into a subform. The added subform will work as a table (you will bind that to the table from interface) and everything from the old template within this new subform will work as a "row" (something what you can repeat for each data item).
Does that sound reasonable?
Cheers Otto

Loading multiple forms

Similar Messages

Maybe you are looking for