Loading Table Data
Using OMW I succesfully managed to capture my access database and migrate it to Oracle. When is time to load the "table data" I get multiple errors one of them being: Integrity constraint violated-parent key not found.
What is the best way to go about loading data into my Oracle schema?
Thank you
Pilton
If it is an MS Access database you are migrating from, then we create a schema with the same name as the mdb filename. So for file northwind.mwb we would create a schema called northwind. The default password is oracle unless you change it in the Oracle Model UI of the Workbench. In the Oracle Model looks under users to see what users exist.
Once the user is created you should simply be able to connect to that user via sqlplus and see all the schema objects/data migrated
Donal
Similar Messages
-
OMW hangs when loading table data?
Hello - I've got the OMW to read the xml version of my access database. However when I tell it to migrate to Oracle, it get through creating all the table users, tablespaces, etc and then it dies when it gets to "loading table data". Any ideas?
Thanks
RichardIf it is an MS Access database you are migrating from, then we create a schema with the same name as the mdb filename. So for file northwind.mwb we would create a schema called northwind. The default password is oracle unless you change it in the Oracle Model UI of the Workbench. In the Oracle Model looks under users to see what users exist.
Once the user is created you should simply be able to connect to that user via sqlplus and see all the schema objects/data migrated
Donal -
Load Table Data into Excel Specific range
Hi,
I am working with Excel Destination in SSIS, where i have to insert table data into multiple excel sheets with specific range, sheet name same as table name and i should load each table into that particular sheet name in excel.
So Sheet name will decide at run time and i have created one variable to pass complete sheet name (like [DimAge$A16:R1000]) in excel destination, but it is throwing error Here i am facing two complexities
1)Getting error while passing excel sheet name as variable
2) How to insert into excel in specific range of values shown as above.
Ur help in solving this would be appreciatedHi Naveen,
Based on my research, a worksheet or range is the equivalent of a table or view in Excel. The lists of available tables in the Excel Source and Destination editors display only existing worksheets (identified by the $ sign appended to the worksheet name,
such as Sheet1$) and named ranges (identified by the absence of the $ sign, such as MyRange).
So when you use a variable with [DimAge$A16:R1000] or [Select * from DimAge!A$16:R$1000] value in the Excel Destination, the value acts as a worksheet or range name. But there is no such worksheet or range in the excel file, so the error message occurs.
To fix this issue, please select the cell range in your excel sheet, then right-click the range to define a name for the range to create some ranges with the specific ranges in excel file, then in the "Name of the Excel Sheet" drop down box of
"Excel Destination Editor" you can see that Named range. Then simply select the range from the drop-down list or use a variable with the range name as the Excel Destination.
For more information about how to import data to Excel sheet's specific region, please refer to the following blog:
http://getsetsql.blogspot.in/2012/01/using-ssis-load-data-to-excel-sheet-at.html
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Load table data to any server-client
Hi...
I have a requirement to load Cost Centre data from CSKS and CSKT tables to any Server u2013 Client. What is the best way to accomplish the same? Do i have to use RFC or just put the cost center into a file and load to another system?
Regards,
Aruna Nivetha.RHi,
Actually, it's a task more to your ABAP or BASIS team, but you can do it yourself as well. You can read more here:
http://help.sap.com/saphelp_47x200/helpdata/en/94/e2d63b8ad9c01ce10000000a11402f/frameset.htm
Another way, is to put this master data in a change request and transport it. You can do it via OKE6.
Regards,
Eli -
Loading table data in a form with a custom query
Hi everyone. I have this challenge with oracle forms. At the top of my form is an LOV text field. And at the bottom is a table (looks just like a master detail form). What I want to do is to select a value from the LOV, and then populate the detail block with information based on a query. The information is not linked to the table assigned to the master block or the table assigned to the detail block.
Let's say the master block contains an LOV which contains dates like AUG-09, DEC-09. After selecting a value, I want to be able to run a query say something like:
select full_name, job_title from per_all_boolys_f where period_name = 'AUG-09' (from master block)
Then this quer will then be used to populate the rows and columns in my detail block.
Is it possible to do this and how would I go about this.
Thank youIgwe,
Based on your query example, you are only selecting from a single table. If this is the case, why not base your Detail Block on this table and then set the DEFAULT_WHERE clause property of the block to: ':MASTER_BLOCK.DATE' and then call Go_Block('DETAIL_BLOCK') and Execute_Query to populate your detail block?
If you truly have a dynamic query, then I would suggest using a From-Clause query based Detail Block? This would allow you to change your query anyway you want so long as it returns the same number of columns and column names don't change. Here is the setup:
1. Set the appropriate properties on your DETAIL BLOCK (as follows)
a. Database Data Block = "Yes"
b. Query Data Source Type = 'FROM clause query'
c. Query Data Source Name = 'Leave blank or enter basics of your SQL query here'
d. ORDER BY Clause = 'Enter any ordering requirements here or set them as needed in your code.'
e. Set Insert Allowed, Update Allowed, and Delete Allowed = 'No'
2. Write the code to define your SQL query and assign it to the QUERY_DATA_SOURCE_NAME property of your Detail Block. This code can be in any trigger that allows execution of Restricted Built-ins (When-New-Block-Instance, When-New-Item-Instance, When-List-Changed, etc) because you will need to call the Go_Block and Execute_Query built-ins. In your situation, you may want to set a flag variable (parameter or global) in your Key-Next-Item and Post-Text-Item triggers and then test this flag variable in a When-New-Item-Instance trigger. For example:
/* Example Key-Next-Item trigger (duplicate this logic in your Post-Text-Item trigger */
/* or replace both triggers with a When-Validate-Item trigger) */
/* My example will use a Parameter object as a variable so you will need to create the */
/* QUERY_DETAIL_BLOCK parameter and set it to a CHAR(1) */
/* data type and set the DEFAULT VALUE to 'N' */
DECLARE
/* Declare any variables you need here */
BEGIN
-- Your trigger specific code here....
:Parameter.QUERY_DETAIL_BLOCK := 'Y';
END;
/* Master Block When-New-Item-Instance trigger sample */
DECLARE
v_SQL VARCHAR2(2000);
BEGIN
-- Any preexisting W-N-I-I trigger code you may have here already
-- New code...
IF ( :Parameter.QUERY_DETAIL_BLOCK = 'Y' ) THEN
-- Reset the parameter first
:Parameter.QUERY_DETAIL_BLOCK := 'N');
-- Build the Dynamic Query
v_SQL := 'select full_name, job_title from per_all_boolys_f where period_name = '' '||:MASTER_BLOCK.DATE|| ' '';
Set_Block_Property('DETAIL_BLOCK', QUERY_DATA_SOURCE_NAME, v_SQL);
Go_Block('DETAIL_BLOCK');
Execute_Query;
Go_Block('MASTER_BLOCK');
END IF;
END;Please note, the above code is an example only - you will need to modify this example to work in your Form. Also, if your query really only selects from a single table, I really encourage you to use the first option of basing the detail block on the table and setting the Default Where clause property.
Hope this helps.
Craig...
If a response is helpful or correct, please mark it accordingly -
What are the tables will update while loading Master data ?
Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar -
Hi,
Iam new to the xml,
can u please anyone help me how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>.
Regards,
vikram.here is the your XML parse in 11g :
select *
from xmltable('//Entity' passing xmltype
'<?xml version="1.0"?>
<DiseaseCodes>
<Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
<Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity>
</DiseaseCodes>
') columns
"dcode" varchar2(4000) path '/Entity/dcode',
"ddesc" varchar2(4000) path '/Entity/ddesc',
"reauthflag" varchar2(4000) path '/Entity/reauthflag'
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
Using this parser you can create procedure as
SQL> create or replace procedure myXMLParse(x clob) as
2 begin
3 insert into MyXmlTable
4 select *
5 from xmltable('//Entity' passing xmltype(x) columns "dcode"
6 varchar2(4000) path '/Entity/dcode',
7 "ddesc" varchar2(4000) path '/Entity/ddesc',
8 "reauthflag" varchar2(4000) path '/Entity/reauthflag');
9 commit;
10 end;
11
12 /
Procedure created
SQL>
SQL>
SQL> exec myXMLParse('<?xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>');
PL/SQL procedure successfully completed
SQL> select * from MYXMLTABLE;
dcode ddesc reauthflag
0 (I87)Other disorders of veins - postphlebitic syndrome 0
0 (J04)Acute laryngitis and tracheitis 0
0 (J17*)Pneumonia in other diseases - whooping cough 0
SQL>
SQL>
Ramin Hashimzade -
Load the data from a transparent customised table in BW to an ODS
Hi there,
How can you load the data from a transparent customised table created in BW to an ODS.
Many thanks.
SarahHi,
just create a generic datasource in rso2 for that table, replicate the datasource for source system 'myself', create a infosource and assign the new datasource to that infosource. Create a update rule from infosource to ods, create a infopackage and load the data.
regards
Siggi -
Loading the data from a text file to a table using pl/sql
Hi Experts,
I want to load the data from a text (sample1.txt) file to a table using pl/sql
I have used the below pl/sql code
declare
f utl_file.file_type;
s varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
loop
utl_file.get_line(f,s);
insert into sampletable (a,b,c) values (s,s,s);
c := c + 1;
end loop;
exception
when NO_DATA_FOUND then
utl_file.fclose(f);
dbms_output.put_line('No. of rows inserted : ' || c);
end;
and my sample1.txt file looks like
1
2
3
The data is getting inserted, with below manner
select * from sampletable;
A B C
1 1 1
2 2 2
3 3 3
I want the data to get inserted as
A B C
1 2 3
The text file that I have is having three lines, and each line's first value should go to each column
Please help...
Thanksdeclare
f utl_file.file_type;
s1 varchar2(200);
s2 varchar2(200);
s3 varchar2(200);
c number := 0;
begin
f := utl_file.fopen('TRY','sample1.txt','R');
utl_file.get_line(f,s1);
utl_file.get_line(f,s2);
utl_file.get_line(f,s3);
insert into sampletable (a,b,c) values (s1,s2,s3);
c := c + 1;
utl_file.fclose(f);
exception
when NO_DATA_FOUND then
if utl_file.is_open(f) then utl_file.fclose(f); ens if;
dbms_output.put_line('No. of rows inserted : ' || c);
end;SY. -
How to load the data using a plsql table in ODI.
Hi All ,
Can anyone help me on this ?
We have a PLSQL procedure which returns a plsql table as out parameter.
We are supposed to load the data in to a file using this plsql table (Table type) in ODI.
Can this be done using ODI?
Regards,
Karthik+Hi,
We have one process with a ref cursor (Oracle) as a source and remote Oracle DB as a target. I ended up writing my own KM that populates a global temporary table from the cursor first and then transfers the data to target. If temporary table is an option for you, the rest is pretty easy.
Regards. -
How to Load the data from excel file(Extension is .CSV) into the temp.table
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinHello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly. -
How to load the data from .csv file to oracle table???
Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al -
How to load the data from excel file into temprory table in Forms 11g?
Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
SachinDeclare
v_full_filename varchar2(500);
v_server_path varchar2(2000);
v_separator VARCHAR2(1);
v_filename VARCHAR2(400);
filename VARCHAR2 (100);
v_stop_load varchar2 (2000);
v_rec_error_log varchar2(4000);
v_error_log varchar2(4000);
ctr NUMBER (12);
cols NUMBER (2);
btn number;
RES BOOLEAN;
application ole2.obj_type;
workbooks ole2.obj_type;
workbook ole2.obj_type;
worksheets ole2.obj_type;
worksheet ole2.obj_type;
cell ole2.obj_type;
cellType ole2.OBJ_TYPE;
args ole2.obj_type;
PROCEDURE olearg
IS
args ole2.obj_type;
BEGIN
args := ole2.create_arglist;
ole2.add_arg (args, ctr);
ole2.add_arg (args, cols);
cell := ole2.get_obj_property (worksheet, 'Cells', args);
ole2.destroy_arglist (args);
END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
,file_name => null
,file_filter => 'Excel files (*.xls)|*.xls|'
||'Excel files (*.xlsx)|*.xlsx|'
,message => 'Choose Excel file'
,dialog_type => null
,select_file => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
application := ole2.create_obj ('Excel.Application');
ole2.set_property (application, 'Visible', 'false');
workbooks := ole2.get_obj_property (application, 'Workbooks');
args := ole2.create_arglist;
ole2.add_arg (args, filename); -- file path and name
workbook := ole2.get_obj_property(workbooks,'Open',args);
ole2.destroy_arglist (args);
args := ole2.create_arglist;
ole2.add_arg (args, 'Sheet1');
worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
ole2.destroy_arglist (args);
ctr := 2; --row number
cols := 1; -- column number
go_block('xxx');
FIRST_RECORD;
LOOP
--Column 1 VALUE --------------------------------------------------------------------
olearg;
v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
:item1 := v_stop_load;
cols := cols + 1;
--Column 2 VALUE --------------------------------------------------------------------
olearg;
:item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
cols := cols + 1;
--<and so on>
ole2.invoke (application, 'Quit');
ole2.RELEASE_OBJ (cell);
ole2.RELEASE_OBJ (worksheet);
ole2.RELEASE_OBJ (worksheets);
ole2.RELEASE_OBJ (workbook);
ole2.RELEASE_OBJ (workbooks);
ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped. -
How to load the data from excel file into table in oracle using UTL_FI
How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some exampleThis is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP -
Error 'Loading Textfile data into external table'
I am using Apex 2.0, Oralce Database 10G and Internet Explorer (version 6.5)
I tried to run following code using SQLCommands of SQLWORKSHOP of Apex
Code Here:
declare
ddl1 varchar2(200);
ddl2 varchar2(4000);
begin
ddl1 := 'create or replace directory data_dir as
''C:\LAUSD_DATA\''';
execute immediate ddl1;
ddl2:= 'create table tbl_temp_autoload
(ID NUMBER,
RECTYPE VARCHAR2(2),
EXPORTNBR NUMBER(2),
EXPORTDATE DATE,
BIMAGEID VARCHAR2(11),
APPLICNBR NUMBER(10),
MEALIMAGE VARCHAR2(17),
MEDIIMAGE VARCHAR2(17),
LANGUAGE VARCHAR2(1),
APPLICCNT NUMBER(1),
OTHAPPLICNBR VARCHAR2(10),
PEDETDATE DATE,
PESTATUS VARCHAR2(1),
ERRORREMARKS VARCHAR2(50),
COMMENTS VARCHAR2(50),
SID1 VARCHAR2(10),
WID1 NUMBER(10),
MEDIROW1 VARCHAR2(1),
LASTNAME1 VARCHAR2(20),
FIRSTNAME1 VARCHAR2(20),
SCHOOL1 VARCHAR2(15),
LOCCD1 VARCHAR2(4),
BIRTHDATE1 DATE,
CASENBR1 VARCHAR2(15),
FOSTER1 VARCHAR2(1),
CHILDINC1 VARCHAR2(4),
RACEAIAN VARCHAR2(1),
RACEBAA VARCHAR2(1),
RACENHPI VARCHAR2(1),
RACEASIAN VARCHAR2(1),
RACEWHITE VARCHAR2(1),
HISPANIC VARCHAR2(1),
NOTHISPANIC VARCHAR2(1),
ADULTSIG3 VARCHAR2(1),
ADULTSIGDATE3 VARCHAR2(10),
ADULTNAME3 VARCHAR2(30),
SSN3 VARCHAR2(1),
SSN3NOT VARCHAR2(1),
ADDRESS VARCHAR2(30),
APTNBR VARCHAR2(6),
CTY VARCHAR2(20),
ZIP NUMBER(5),
PHONEHOME VARCHAR2(12),
PHONEWORK VARCHAR2(12),
PHONEEXTEN VARCHAR2(6),
MEALROWA VARCHAR2(1),
LNAMEA VARCHAR2(20),
FNAMEA VARCHAR2(20),
MINITA VARCHAR2(6),
GENDERA VARCHAR2(1),
AGEA NUMBER(2),
MOTYPEA VARCHAR2(1),
MONAMEA VARCHAR2(1),
FATYPEA VARCHAR2(1),
FANAMEA VARCHAR2(1),
FAMNBR NUMBER(1),
PARENTINC NUMBER(5),
FAMILYINC NUMBER(5),
FAMILYSIZE NUMBER(2),
PGSIG1 VARCHAR2(1),
PGNAME1 VARCHAR2(30),
PGSIGDATE1 VARCHAR2(10),
FAMSIZE1 VARCHAR2(2),
FAMINC1 VARCHAR2(6),
PGSIG2 VARCHAR2(1),
PGNAME2 VARCHAR2(30),
PGSIGDATE2 DATE,
FAMSIZE2 VARCHAR2(2),
FAMINC2 VARCHAR2(4),
GRADE NUMBER(2),
SCHOOL VARCHAR2(40),
RACE VARCHAR2(4),
MEDI_CALID VARCHAR2(15),
MEDSTATUS VARCHAR2(1),
ADULT1NAME VARCHAR2(40),
ADULT1TYPE VARCHAR2(1),
ADULT1INC1 VARCHAR2(5),
ADULT1INC2 VARCHAR2(5),
ADULT1INC3 VARCHAR2(5),
ADULT1INC4 VARCHAR2(5),
ADULT2NAME VARCHAR2(40),
ADULT2TYPE VARCHAR2(1),
ADULT2INC1 VARCHAR2(5),
ADULT2INC2 VARCHAR2(5),
ADULT2INC3 VARCHAR2(5),
ADULT2INC4 VARCHAR2(5),
ADULT3NAME VARCHAR2(40),
ADULT3TYPE VARCHAR2(1),
ADULT3INC1 VARCHAR2(5),
ADULT3INC2 VARCHAR2(5),
ADULT3INC3 VARCHAR2(5),
ADULT3INC4 VARCHAR2(5),
ADULT4NAME VARCHAR2(40),
ADULT4TYPE VARCHAR2(1),
ADULT4INC1 VARCHAR2(5),
ADULT4INC2 VARCHAR2(5),
ADULT4INC3 VARCHAR2(5),
ADULT4INC4 VARCHAR2(5),
ADULT5NAME VARCHAR2(40),
ADULT5TYPE VARCHAR2(1),
ADULT5INC1 VARCHAR2(5),
ADULT5INC2 VARCHAR2(5),
ADULT5INC3 VARCHAR2(5),
ADULT5INC4 VARCHAR2(5),
ADULT6NAME VARCHAR2(40),
ADULT6TYPE VARCHAR2(1),
ADULT6INC1 VARCHAR2(5),
ADULT6INC2 VARCHAR2(5),
ADULT6INC3 VARCHAR2(5),
ADULT6INC4 VARCHAR2(5),
AGE1LT19 VARCHAR2(1),
AGE2LT19 VARCHAR2(1),
AGE3LT19 VARCHAR2(1),
AGE4LT19 VARCHAR2(1),
AGE5LT19 VARCHAR2(1),
AGE6LT19 VARCHAR2(1),
MIDINIT1 VARCHAR2(1)
organization external
( type oracle_loader
default directory data_dir
access parameters
( fields terminated by '','' )
location (''DataJuly07.txt'')
execute immediate ddl2;
end;
Error Received:
ORA-29913:error in executing ODCIEXITTABLEFETCH callout ORA-30653: reject limit reached
Please help ASAP. I am new with oracle and Apex. Any help will be appreciated greatly.I downloaded the External table simple application from the Apex Packaged application and installed it. It installed successfully but when I run it - it doesn't load the data eventhough I get a message stating it was successful. I am running it on OracleXE - Apex 3.0.1.
In addition, I tried running the stored procedure directly (ext_employees_load) in sql-developer and received the ora-30648.
Please help.
thanks,
Tom
Maybe you are looking for
-
I installed OS Lion on to my iMac about a week ago. I have CS3 Design Premium installed. Apart from printing issues with ID and Illustrator, which I found the fix for, the programmes worked until today. Now they will no longer open and I get the foll
-
Hi, I received a semi working powerMac G4 Cube from a freecycle community, and while initially it worked fine, I had to dissemble the unit to replace the dvd drive which had a dvd stuck in it. I used one from a second unit that I was also given and I
-
Clear Item Cache after validation failure
Hi Guys, I have a page validation that fires when two items (P6_LOCATOR_ID & P6_NEW_LOCATION) are equal which is working OK. The field validation is on the P6_NEW_LOCATION field. When this validation is true, I want the validation message to appear a
-
Mid-2011 15" macbook pro, 16GB main memory, solidstate disk (installed myself) After upgrading to Maverick yesterday I tried to use the new iCal map and directions feature. I entered the first and last name of the appointment, that is in my contacts
-
Update was clean from Lion to Mountain Lion
Update was clean from Lion to Mountain Lion; I never had such a experience with a windows machine