OMW hangs when loading table data?

Hello - I've got the OMW to read the xml version of my access database. However when I tell it to migrate to Oracle, it get through creating all the table users, tablespaces, etc and then it dies when it gets to "loading table data". Any ideas?
Thanks
Richard

If it is an MS Access database you are migrating from, then we create a schema with the same name as the mdb filename. So for file northwind.mwb we would create a schema called northwind. The default password is oracle unless you change it in the Oracle Model UI of the Workbench. In the Oracle Model looks under users to see what users exist.
Once the user is created you should simply be able to connect to that user via sqlplus and see all the schema objects/data migrated
Donal

Similar Messages

  • FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around

    FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
    Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
    Symptom:
    FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or  with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
    notices that the "status circle" spins around endlessly.
    Actvity Monitor.app shows "Final Cut Pro (Not Responding)
    and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
    History: Upgraded FCPX from V10.0.6 to V10.0.07.
    "FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
    32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
    As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
    After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
    WORKAROUND:
    FORCEd QUIT FCPX V10.0.7
    RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
    created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
    For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
    MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
    Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
    Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
    Let FCPX V10.0.7 settle….
    select the project you just added above  and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
    wait until ALL the rendering as stopped.
    QUIT FCPX V10.0.7
    (now if FCPX locks up, just force it out and start again as above).
    repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
    When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
    If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
    I have managed to restore ALL my  "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
    Other issues:
    use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your  "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's  volume table that represented objects in  "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
    SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
    I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
    I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
    HTH
    warwick
    Hong Kong

    Hi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
    I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
    Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
    TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
    Your/Apples  suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
    ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
    Lastly I have noticed that:
    impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
    the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
    As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
    Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
    I'll monitor this thread.
    Thanks for your comments lads!

  • How to maintain Data availability in Oracle 10g RAC when LOADING the data?

    Hi
    we are having Oracle 10g server on Sun Solaris(64 bit) with 8 GB RAM.
    We are in need of moving the database to "Oracle 10g RAC". (Real Application Clusters)
    Our doubt is when loading the data into RAC server, will it affect the application?
    coz' we heared that RAC server should be down when we load the data.
    Is this correct?
    If yes, then How to maintain High data availability when we load the data in RAC server?? Please help me.
    Thanks.

    First, is this the same question that a colleague of yours posted in this thread?
    Data Load in RAC
    Second, are other sessions querying the table that you're loading data into? If so, how are you loading the data?
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • IPhoto 11 and 10.8.2 Hangs when loading library

    Ok..  I have just done my 4th clean install of Mountain Lion in the last 3 months.  Due to issues I've manually restored my iPhoto, iTunes, iMovie and Garageband content back to my new clean system and then opened the above mentioned programs.
    The problem is that iPhoto will not get past the opening after I choose the iPhoto library.
    My test account will open a blank iPhoto library.  But the main user account just hangs when loading the library.
    So far I've done the following.
    Launched with Command and Option and rebuilt the library and used the iphoto library 3rd party tool to rebuild the library.
    I've cleaned disk permissions.
    I've run Onyx and cleaned the entire system.
    I've trashed iPhoto and reinstalled iPhoto from the iPhoto 11 disk and then updated through the App store.
    What else can I try?  My iPhoto library is 54 Gigs and is all my digital photos of my kids since they were born 10 years ago.

    One simple thing you can try is Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • "Error occurs when loading transaction data from other model" - BW loading into BPC

    Hi Experts,
    I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
    If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
    Task name CONVERT:
    No 1 Round:
    Error occurs when loading transaction data from other model
    model: AIACONS. Package status: ERROR
    As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
    Has anyone encountered similar or have any ideas as to the problem?
    Best,
    Chris

    Hi Vadim,
    It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
    We get a warning when we try and validate the transformation file:
    "Error occurs when loading transaction data from other model".
    This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself.  The validation log says:
    Validate  and Process Transformation File Log
    Log creation time
    3/7/2014 16:09
    The result of validation of the
      conversion file
    SUCCESS
    The result of validation of the
      conversion file with the data file
    FAIL
    Validation Result
    Validation Option
    ValidateRecords = NO
    Message
    Error occurs when loading transaction data from other model
    Reject List
    I can't find any errors anywhere else.
    Best,
    Chris

  • Error occurs when loading transaction data from other model

    Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/  complete with all the mappings, i am getting the same error as above.
         I can see options, mapping and conversion sections are validating successfully and throwing the above error.
    Incomplete Transformation File
    *OPTIONS
    FORMAT = DELIMITED
    HEADER = YES
    DELIMITER = ,
    AMOUNTDECIMALPOINT = .
    SKIP = 0
    SKIPIF =
    VALIDATERECORDS=YES
    CREDITPOSITIVE=YES
    MAXREJECTCOUNT= 10
    ROUNDAMOUNT=
    *MAPPING
    CUSTOMER = *NEWCOL (NO_CUST)
    Validating the transformation files
    Validating options...
    Validation of options was successful.
    Validating mappings...
    Validation of mappings was successful.
    Validating conversions...
    Validation of the conversion was successful
    Creating the transformation xml file. Please wait...
    Transformation xml file has been saved successfully.
    Begin validate transformation file with data file...
    [Start test transformation file]
    Validate has successfully completed
    ValidateRecords = YES
    Error occurs when loading transaction data from other model
    Validation with data file failed
                           I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
    Thanking you
    Praveen

    Hi,
    By
    *MAPPING
    CUSTOMER = *NEWCOL (NO_CUST)
    you want CUSTOMER to receive a fixed string "NO_CUST"?
    If so use,
    *MAPPING
    CUSTOMER = *STR (NO_CUST)

  • Error 4 when loading external data

    hi all,
    I have unchecked uncheck currency conversion for external systems in my info package and then loaded the data from a flat file.
    and then i am getting the below errors.
    cost -> cannot be converted to currenecy (since cost contains currency item)
    netval_inv -> cannot be converted to currenecy (since cost contains currency item)
    /bic/zntwthpm -> cannot be converted to currenecy (since cost contains currency item).
    if i check the option
    currency conversion for external systems in my info package
    then i am getting error 4 when loading external data.
    Can anyone help me out!!!
    thanxs
    haritha

    Hi haritha,
    Please check whether your file whcih you are loading is open , when you are starting the Infopackage.
    Also please check this SAP Note 600246 - RSAR 234: Error 4 when you load external data.
    What is your BW System (Version/Patch)
    Thanks.
    CK

  • Error 3 when loading external data

    Hi Gurus!!
    I am trying to load data from a flat file into a Cube. The load is done by a process chain and have worked perfectly before. The file is located on the application server.
    Now I get the following error:
    Cannot Update Request REQU_DESUFKD2XA1LDREQ0KEJZ2TJC in Data Target
    Error 3 when loading external data
    The file looks ok when i compare it with the ones i received earlier.
    Any ideas what this error 3 is all about?
    Thanks in advance!
    Pontus

    Hi
    I Have had trouble raching the network for some time.
    Problem solved. My misstake, It was the cube that were set to transactional.....
    I will credit A.H.P.
    Thanks everyone!
    Regards
    Pontus

  • Error 1 when loading external data

    Hi BW( Best and Wise) friends,
    I am not able to load data into my infocube. My source system is a PC file.
    Message <b>"Error 1 when loading external data is displayed."</b> when scheduled.
    When I checked the error details using Monitor button,
    During extraction, the data request was arranged(indicated by green mark),but there was error in <b>data request(red).</b>
    During extraction,data request was received (green),but there was some error in <b>data selection(red).</b>
    Anticipating good solution.

    HI all,
    1.The flatfile matches with the transfer structure
    2.The file is a “.csv” format file only.
    3.The path is correct
    I had chosen comma as my data separator.
    I had declared fields in the following way in the XL csv file
    Name of the candidate – text
    Name of the party- text
    Age-number
    Number of votes gained –number
    Calendar day –text.
    I had already tried the following.
    When I clicked the preview in the “external data” tab  of the infopackage, a window showing the preview parameters is opening. When I clicked the tickmark, message “error 1 when loading data is displayed.
    4. The details tab of the monitor showed the following:
    Overall status : Errors occurred: or: Missing messages-red
    4.1)Requests(messages):Errors occurred-red
           Data request arranged-green                       
           Error in datarequest-red
    4.2)Extraction(messages):Errors occurred-red
           Data request received-green
           Error occurred in data selection-red
    4.3)Transfer(IDocs and TRFC):Everything ok-green
           Info IDoc 1: Application document posted-green
           Info IDoc 2: Application document posted-green
    4.4)Processing(data packet): No data-yellow
    I had initiated the discussion in the forum with this  information only.
    Regards,
    Balaji
    Message was edited by: balaji vijayakumar

  • Error occurs when loading transaction data from other cube

    Hi Gurus,
    I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
    Can anybody help me to solve this problem?!
    Thanks a lot & Best Regards,
    HH

    Hi,
    Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
    *OPTIONS
    FORMAT = DELIMITED
    HEADER = YES
    DELIMITER = ,
    AMOUNTDECIMALPOINT = .
    SKIP = 0
    SKIPIF =
    VALIDATERECORDS=YES
    CREDITPOSITIVE=YES
    MAXREJECTCOUNT=
    ROUNDAMOUNT=
    *MAPPING
    Category=*NEWCOL(ACTUAL)
    P_0BASE_UOM=0BASE_UOM
    P_0BUS_AREA=0BUS_AREA
    P_0COSTCENTER=0COSTCENTER
    P_0FUNDS_CTR=*NEWCOL(null)
    P_0GL_ACCOUNT=0ACCOUNT
    P_0LOC_CURRCY=*NEWCOL(MXN)
    P_0MATL_TYPE=*NEWCOL(null)
    P_0VENDOR=0VENDOR
    P_DataSrc=*NEWCOL(UPLOAD)
    P_ZMATERIAL1=0MATERIAL
    P_ZMATERIAL2=*NEWCOL(null)
    P_ZMATL_CLASS=*NEWCOL(null)
    P_ZMATL_TESP=*NEWCOL(null)
    P_ZRATIO=*NEWCOL(KF_inpmdInt)
    Time=0CALMONTH
    SIGNEDDATA=0TOTALSTCK
    *CONVERSION
    Time=Time_conv.xls
    EXTERNAL     INTERNAL
    201101          2011.JAN
    201102          2011.FEB
    201103          2011.MAR
    201104          2011.APR
    201105          2011.MAY
    201106          2011.JUN
    201107          2011.JUL
    201108          2011.AUG
    201109          2011.SEP
    201110          2011.OCT
    201111          2011.NOV
    201112          2011.DEC
    Thank you for taking at glance to the files.
    Best Regards,
    HH

  • My 64Bit Adobe CS6 hangs when loading a file

    My Windows 7 Adobe CS6 v13.0.1 x64 hangs when loading a file. However the CS6 v13.0.1 x32 application runs correctly. Do I need to re-install Adobe CS6 Upgarde?

    Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
    To help others help you, please read through this article and provide any additional relevant details.

  • My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.

    My iPad2 will sometimes hang when loading an mp4. Gives an error message then attempts to resync which hangs until I unplug the iPad.
    I have an iPad 2and have not had any trouble until I up dated my os. I have a pc with win 7.  I do not sync since I have so much music on my computer. I synced my apps during the back up but I had to manually reload my music and videos. Since then I turned off all syncs.
    Since I have to load all my movies on this has been happening. I get through about 4 movies then it will hang up. I eventually get an error message that it cannot load this movie. I then attempts to close out. This seems to hang. When I attempt to eject the iPad it attempts to sync and that never finishes. I pull the plug and that stops the sync but I have to restart the computer before I plug back in the iPad or it will not recognize it or it will attempt to finish the sync which never ends. It sometimes hangs on something with safari and site protection.
    After I restart my computer I can put in 4 or so movies, including the one it hung on before, but it always hangs up again. Any suggestions?

    I am having an almost identical problem and hoped that iOS 6 and the new iTunes would fix it.  Regrettably, I again got 3 movies synced last night before iTunes locked up and gave me the xxxx cannot be synced "because the file cannot be written" message.  Same deal with iTunes hanging on "finishing sync" after that and me having to remove the iPad from the cable to get things to come back to life on the PC (Win 7 64 bit).
    I've also done a factory restore followed by a restore from backup and have the same problem. 

  • Loading Table Data

    Using OMW I succesfully managed to capture my access database and migrate it to Oracle. When is time to load the "table data" I get multiple errors one of them being: Integrity constraint violated-parent key not found.
    What is the best way to go about loading data into my Oracle schema?
    Thank you
    Pilton

    If it is an MS Access database you are migrating from, then we create a schema with the same name as the mdb filename. So for file northwind.mwb we would create a schema called northwind. The default password is oracle unless you change it in the Oracle Model UI of the Workbench. In the Oracle Model looks under users to see what users exist.
    Once the user is created you should simply be able to connect to that user via sqlplus and see all the schema objects/data migrated
    Donal

  • Error when loading the data from PSA to ODS......

    Hi BW guru's,
    i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
    Please give a step by step guidelines for me...
    the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
    thanks in advance,
    ashok.

    hi ashok,
    u can push data from  psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
                                                 or
    In ods > delete the failed request>goto the processing tab-->select 3rd option   " psa and then subsequentially to data targets ", --> schedule the infopackage.
    bye
    sunil

  • How to avoid 'duplicate data record' error message when loading master data

    Dear Experts
    We have a custom extractor on table CSKS called ZCOSTCENTER_ATTR. The settings of this datasource are the same as the settings of 0COSTCENTER_ATTR. The problem is that when loading to BW it seems that validity (DATEFROM and DATETO) is not taken into account. If there is a cost center with several entries having different validity, I get this duplicate data record error. There is no error when loading 0COSTCENTER_ATTR.
    Enhancing 0COSTCENTER_ATTR to have one datasource instead of two is not an option.
    I know that you can set ignore duplicates in the infopackage, but that is not a nice solution. 0COSTCENTER_ATTR can run without this!
    Is there a trick you know to tell the system that the date fields are also part of the key??
    Thank you for your help
    Peter

    Alessandro - ZCOSTCENTER_ATTR is loading 0COSTCENTER, just like 0COSTCENTER_ATTR.
    Siggi - I don't have the error message described in the note.
    "There are duplicates of the data record 2 & with the key 'NO010000122077 &' for characteristic 0COSTCENTER &."
    In PSA the records are marked red with the same message (MSG no 191).
    As you see the key does not contain the date when the record is valid. How do I add it? How is it working for 0COSTCENTER_ATTR with the same records? Is it done on the R/3 or on the BW side?
    Thanks
    Peter

Maybe you are looking for