Loading variant automatically - at the start of a program

Hi,
I have a question according to the transaction ME59N. I have defined a variant and when I start the program I would like to load the variant automatically. At the moment I have manually load the variant (each time).
Is that possible to load the variant automatically and if yes --> how?
Thanks in advance.
Poller

Hi Poller,
If you are calling the transaction from a program then you have to use
*USING SELECTION-SETS OF PROGRAM prog *
Regards
Abhii

Similar Messages

How do you load artworks automatically into the indeisgn CS3

Hi All,
How do you load artworks automatically into the indeisgn CS3. Is it through a script or any other way.
Thanks
Devakanth

"artworks" is a bit vague...can you expand?
File > Place is the usual way, but there are times when cut and paste is fine or better.

When i use IE9, i go to my emails and any pics in the mail open with the mail but with FF i have to download them is there a way to make the pics open in the mail, i set yahoo to load images automatically in the options menu this has had no effect, thanks

some pictures(jpeg or gif) come as part of email if i use IE9 these images open as part of the mail, but with firefox i have to download them separately and then they don't appear in email. i have been in the options menu and allowed yahoo.com to automatically load images but this has had no effect, thanks

Sounds like you did this on the fly.
MM is supposed to open the Marker Panel Dialogue
M just sets a marker
Not sure if either are intended for on the fly during playback .
There is also a Marker Icon on the Source Window Pane >>

DB-instance not set to status "online" automatically after the start of DB-service

Hi,
I have installed an Oracle server (P4 1,7 GHZ / Win2000 Prof./ Oracle
version EE 8.1.7). I have created a database but now I have some problems.
After rebooting the server, the created DB-instance does not start
autmatically although the service (OracleService [databasename]) is being
started properly. So I have to launch the instance-manager and launch the
instance manually. What is even more a problem is that the instance can only
be started by the Windows user who created the database. If another user is
logged on the Windows system, the instance cannot be started at all. When
trying to start the instance, the task is being stopped right at the first
of the three steps (launch, mount, ...). An exclamation mark appears, but no
error message at all. I did not find any error log.
For further tests, I have logged in with another Windows user and created
another database . The result was the same. The instance was not set to
"online" automatically and only the Windows user who created the DB was able
to set the instance online.
Any help would be appreciated.
Best regards,
Christian

Hello,
Please note that SQL Server requires at least 1 GB of RAM. The operating system (Windows Server) requires 2 GB of RAM (recommended) or 512 MB (minimum). This means any virtual machine that will receive the installation of a SQL Server instance requires 1.5
or 2 GB at least.
The behavior of SQL Server setup tells me that the virtual machine does not have enough memory assigned or .NET Framework 3.5 was not enable on Control Panel->Program
and Features before trying to install SQL Server.
The following thread is about another possible cause of this error:
http://social.msdn.microsoft.com/Forums/mr-IN/sqlsetupandupgrade/thread/575d3025-69f5-4152-a473-44496b008811
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Applescript to automatically update the EyeTV DVB EPG program guide

For EyeTV users in Europe and Australia with DVB EPG access, you will all know that EyeTV will not keep that database automatically updated.
So I wrote this bit of Applescript will update EyeTV's free to air DVB EPG database.
Paste it into the ApplesScript Editor, and save it as an application somewhere like in Applications. On first run you will get a dialog saying it need access to Accessibility. Navigate to System Preferences > Security and Privacy > Accessibility and you will see your app listed there. Enter your password, click the checkbox, and then try again. It should then work fine.
To automate the launching of the script, set it to run at at daily a convenient time using either Lingon (or some similar launch agent configuration utility), or using iCal as per this tip: http://www.maclife.com/article/howtos/how_make_your_ical_alarm_perform_action
Running it daily (or as often as you like) will keep your EyeTV EPG database up to date always. No more missed recordings because the EPG was not up to date! Yay!
This is the basic script, I'm sure it can be better.:
tell application "EyeTV"
          activate
end tell
tell application "System Events"
          tell process "EyeTV"
                    keystroke "g" using command down
                    delay 1
                    click (pop up button 1 of window 1)
                    delay 1
                    click menu item "Update DVB Program Guide" of menu 1 of pop up button 1 of window "EyeTV Programs"
          end tell
end tell
Cheers
Chris.

Good morning Frank
OK....
I too have the same issue (didn't notice it at first). Having wasted several hours, I found no way around it.
But there are tools like clicclick that can click anywhere on the mac screen. So... get it from here:
http://www.bluem.net/en/mac/cliclick   (big thank you to Carsten Blüm) :-)
install as recommended (I put it in usr/bin/ as I had no usr/local/bin). Check it works via the terminal by pastingcliclick c:28,11 into terminal and pressing return. If that opens the apple menu, then it is installed and working.
Then try this script, which first puts the EyeTV window to a specific location on the screen, then instead of using UI scripting to click the silly pop up button 1, uses clicclick to clik at the location of the button. This opens the menu, and then UI scripting can click it. You may want to change the EyeTV window location from the value I chose, if so put it into your prefered position then use the Accessibility Inspector to get the location of the button, then add some pixels either side of that.
For me this now works perfectly every time, I hope it will for you. Annoying to have to install clicclick but there you go.
tell application "EyeTV"
activate
set the position of window 1 to {30, 60}
end tell
tell application "System Events"
tell application process "EyeTV"
keystroke "g" using command down
delay 4
do shell script "cliclick c:170,70"
delay 1
click menu item "Update DVB Program Guide" of menu 1 of pop up button 1 of window "EyeTV Programs"
end tell
end tell
I have found that the delay after the keystroke g is essential otherwise I get an invalid index error, I think because it is not ready to accept the click. You may need to change the delay.
Also when using Lingon to launch the Applescript App, the path needs to be to the applet file inside the contents of it. ie something like mydirectory/myappname.app/contents/MacOS/applet. name your app without spaces.
cheers
Chris

Recently Firefox has stopped loading some graphics including the home page. Is this a virus ? I have reloaded Firefox with the same result.

I have started using Chrome, Opera and even IE with no problem.

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

I have selected not to load images automatically in OPTION of firefox, and i want to keep this option as it is. now can i display images of particular page without changing DONT LOAD IMAGE AUTOMATICALLY?

i have selected not to load images automatically in OPTION of firefox, and i want to keep this option as it is. now can i display images of particular page without changing DONT LOAD IMAGE AUTOMATICALLY? for example if i trust that image on particular page doesnot contain any adult material and safe to see that page from home, can i temparory view image on page?

-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to Tools Menu -> Options -> Content -> click '''Exceptions...''' button infront of '''Load images automatically''' -> type the address of the website on which you want to load images e.g. yahoo.com and click '''Allow''' button -> click Close
-> Click OK on Options window -> Restart Firefox
Check and tell if its working.

Bluetooth no longer loads automatically when the computer starts

I have the Bluetooth Stack version 2.01.21.1. It was working fine. When the laptop booted up, the bluetooth mouse was automatically connected.
All of a sudden the icon no longer appears automatically in the system tray and so I have to manually connect the mouse each time
It is still listed in the startup menu on the desktop and it is still checked in startup in the msconfig.
How do I fix this?
Thanks in advance

I have just gotten off the phone with a microsoft tech who actually seems to have fixed this somewhat
He went to start/run to get to services.msc.
He chose "SSDP Discovery Services" which "enables discovery of
UPnP devices on your home network" and DISABLED it.
Go figure
The BT icon now appears in my system tray and starts up automatically when the computer starts.
I say somewhat because It still disconnects if left idle for a long period, which it did not do previously, but at least it is there when I log on.
I want to mention that I have a Dell, not a Toshiba (did not realize this forum was for Toshiba laptops rather than Toshiba software) but perhaps
you will find this information useful.
Also, at http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx you will find an autorun tool that lets you fix what is or is not
in the startup menus. It seems to work better than using msconfig which on my laptop was not making a difference as to what started up and what did not.
It is meant for IT professionals so I would not mess with it too much. However if you just check or uncheck in the startups for the BT manager you will
not do any damage.

How to load a curve and the view automatically in diadem from labview ?

Hello,
I want to automate a system for processing and analyzing data and for that I am using labview.
I recently discovered software diadem and already I am able to send data from labview.
I would now like to obtain a curve directly in the "view" is that possible?

Hello Beneuss,
You can create a layout template in VIEW, save it to disk and then load it when DIAdem is started. These two lines will automatically load a VIEW layout called "Example" and display the VIEW window.
Call View.LoadLayout("Example.tdv")
Call WndShow("VIEW")
To automatically have a curve show up in VIEW, make sure that you assign the correct curves in the VIEW layout before you save the layout. This is done with the drag&drop functionality from the DataPortal. Just assign the channel you wish to see, and then save the layout. It will "remember" all the channel assignments and automatically show all the channels you had assigned, as long as you don't change the channel names.
Please let me know if that helps and if there is anything else we can help you with.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

How to run the program with variant automatically

Hi experts,
I want to know how can I run the program with a variant automatically without defining any transactions or jobs. I want my program to run with a variant automatically, when I press F8.

Try doing this way...
First Create a Sel Screen varient, 'ZTEST123' in this case
Report ZTEST.
parameters:
w_kunnr type kna1-kunnr,
w_flag type c no-display.
start-of-selection.
if w_flag eq ' '.
submit ZTEST USING SELECTION-SET 'ZTEST123' with w_flag eq 'X'.
endif.
end-of-selection.
write: w_kunnr.
Thanks.

Itunes won't load CDs automatically and I have to restart it everytime to load 1 CD. I have ensured I have latest Itunes, latest DVD driver, start itunes from program library in safe mode but nothing works. Any ideas ?

Itunes won't load CDs automatically and I have to restart it everytime to load 1 CD. I have ensured I have latest Itunes, latest DVD driver, start itunes from program library in safe mode but nothing works. Any ideas ?

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Start-up disk is not the first one to load or appear on the desktop

I just switched to 10.5 and have the following challenge.
My MBP HD is partitioned in to 3 sections.
Partition 1 = OS10.4 with programmes.
Partition 2 = OS10.4 with other programmes.
Partition 3 = files.
Under 10.4 the MBP would load the start-up partition first (partition 1 or 2) and the other partitions next. This would result in the disks appearing in order of loading. For example if I start up from Partition 1 the order would be from the top:
Partition 1
Partition 2
Partition 3
Followed by any files that might be on the desktop.
In other words the computer would load the start-up volume first and display this at the top of all disk displayed on the desktop.
I have now switched to 10.5 and this no longer happens. It seems now that the MBP displays the partition wherever it was last put. Is there a way of changing this? Or has something changed in the OS?
I would like it to load/show the partition with the active OS as top one so I can see from what OS we are presently working by seeing the active partition up top.
Any suggestions? or any other way one cold automatically see what partition is presently active?

Barry Hemphill wrote:
Hi again "oldtimer" (chuckle).
I take that as a compliment Barry!
How about putting your partitioned stuff on an external firewire drive?
I travel a lot so that is not really an option for my MBP
I have both time machine and a bootable clone in separate partitions on an external drive.
I have a FW backup (well 2 the old-timers have learned ). Interesting about your Time machine. do you back up to it over the FW cable? I thought this only works over a Wireless connection?

Why does my cursor not automatically select the entire word when I try to select text by starting/ending in the middle of a word?

In any other browser I've used (or word processor, for that matter) when I select text using my mouse cursor, if I start and/or end in the middle of a word, it automatically selects the whole word when I'm selecting more than one word. But for some reason this is not happening in Firefox. If I try to select say 3 words, and I start in the middle of the first word and end in the middle of the last word, it will only select those parts, not all 3 words entirely.

Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.

How do i backup the list of load images automatically exceptions under Options- Content. I want to transfer to another comp without re-adding one at a time

How do i backup the list of load images automatically exceptions under Options->Content. I want to transfer to another comp without re-adding one at a time. EVen if there is no way to backup, what is the system file for Firefox that stores these, so i can transfer this file or open it in an XML or similar editor to copy them out?

The permissions.sqlite file stores 'allow' and 'block' exceptions for cookies, images, pop-up windows, and extensions (software) installation.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder
See also:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? Only one Sparse Bundle, same name.

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? There is only one sparse bundle but when I enter time machine I don't see my historic backups. I use a synology DS212 for my time machine. Started a new backup which is 218gb but it says 618 gb is occupied therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014. As you can see there is a second sparse bundle from 2012. Not sure what that is.

This is an old message now, but what happened to me similarly was:
I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
(I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
Charles

Loading variant automatically - at the start of a program

Similar Messages

Maybe you are looking for