Loading Variants to Other Clients

Hi All!
Does anyone know of a way to take variants from one client and load them into another client? I would like to be able to do this without a transport request, if at all possible.
Thanks,
Jeff

Hi Jeff,
No Jeff there is no standard method of transporting variant from one system to another w/o using transport..
but you can do one thing..you can download variant properties for respective program from one system to a flat file and upload the same in to the system where you need to transport the variant.
For this you will have to write two program one for downloading variant and other in target system for uploading..
You will have to read variant attributes from following table
     1. VARID
     2. VARIS
     3. VARIT
     4. VARI
read this table with condition on you program id..
try this let me know if you have any problem..
enjoy SAP
Pankaj Singh

Similar Messages

Transporting Integration model variants to other client

Hi,
We have a large no of integration model variants which we want to transfer to another client. Can you suggest how it can be done ?
Regards,
Sireesh

Sireesh
It is not a good practise to transfer integration model variants from one client to another . Your variants will most probably become useless after you transfer it from one client to another . The reason behind this is as follows. Most companies have different logical systems for their different clients. for example in development if the logical system ( CFM1 see logical system tab) is "DEV" and in test system if the logical system is "TEST" , how are you going to use the variant that you transferred from development system to test system in the test system ?
The best way is to create the variants for the integration model in the respective clients. Afterall it is a one time activity !
thanks
Saradha.

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Access denied while loading jar files from client

I am creating a platform
that can be started by JWS
and then load plug-ins from client drive.
I've signed my platform (packaged as a jar file),
and set up the security tag in my jnlp,
so that it can access client files.
The plug-ins are packaged as jar files.
And in one of the plug-ins, there is a class that has a JFileChooser field.
While initializing this field, the AccessControlException is thrown.
I can't figure out what is wrong,
So I tried to sign the plug-in, but the problem stands still.
PS. I have made my own ClassLoader,
and this platform works well without JWS.
Please help me, thanks.
Below is the error message:
Java Web Start 1.4.2 主控台,已啟動 Fri Jul 02 01:31:17 CST 2004
Java 2 Runtime Environment:版本 1.4.2,作者:Sun Microsystems Inc.
/*my own log message*/
2004/7/2 上午 01:31:23 pluginmanager.Activater activate /*this is my own classloader*/
配置: activate jar=\Plugins\Common.jar /*load plug-in Common.jar*/
2004/7/2 上午 01:31:23 pluginmanager.Activater activate
細緻: collect resources /*collect other jar files needed by Common.jar*/
2004/7/2 上午 01:31:23 pluginmanager.Activater activate
細緻: load plugin=\Plugins\Common.jar
2004/7/2 上午 01:31:23 pluginmanager.Activater activate
細緻: activating class name=filemanager.FileManager /*instantiate plug-in component*/
java.security.AccessControlException: access denied (java.util.PropertyPermission user.dir read)
     at java.security.AccessControlContext.checkPermission(Unknown Source)
     at java.security.AccessController.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPermission(Unknown Source)
     at java.lang.SecurityManager.checkPropertyAccess(Unknown Source)
     at java.lang.System.getProperty(Unknown Source)
     at java.io.Win32FileSystem.getUserPath(Unknown Source)
     ... /*cut*/
     at javax.swing.JFileChooser.<init>(Unknown Source)
     at filemanager.Open.<init>(Open.java:20)
     at filemanager.FileManager.<init>(FileManager.java:38)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     ... /*cut*/
     at java.lang.Class.newInstance(Unknown Source)
     at pluginmanager.Activater.activate(Activater.java:120)
     at pluginmanager.PluginManager$ActivateAction.actionPerformed(PluginManager.java:53)

When running under Java Web Start, a security manager is installed.
Since you have created your own classloader, you are responsible for assigning permissions to the classes you load.
You can change you class loader to extend SecureClassLoader, then override getPermissions:
protected PermissionCollection getPermissions(CodeSource codesource) {
PermissionCollection perms = super.getPermissions(codesource);
/* add whatever permissions you want your code to hance*/
perms.add( ... );
/* or just add all-permissions */
perms.add(new AllPermission());
or - you can just remove the Security Manager:
System.setSecurityManager(null);
/Dietz

Error in Info Package - NOT able to be used as loading variant

Hii All
I develop a process chain where I extract data from ODS to Cube. Now I am getting an error. A info pkg for extracting data from ODS to Cube giving error message of InfoPackage ZPAK_XXX is generated; NOT able to be used as loading variant.
I am not able to understand why this error is coming ??
Plz tell me how to resolve it ??
I searched some documents but not cleared.
Thanks in advance
Neha

Hi
Create a new infopackage and try loading.
You can also refer to
[Full load ODS to ODS in a Process chain;
[Process chain;

Business content load data from multiple clients

Hi Experts,
we are implementing Business Content for FI-GL. On the system there is already the content enabled and the extraction from one client (let's say Client200). We now have to extract data from Client300. How can we do that?
Thanks in advance,
Costi

You should create another Source system on the other client and copy the transfer rules from the extractor mapping them on the other source system . After this you can create the infopackage and load data
hope it helps

Copy a travel variant from another client (not 000)?

We have a situation where some of our configured variants are not in a client, DV2/120 but ARE in DV2/160 and in other evironments (DV3). Is there a way to copy a variant, either with PRCO or another tool, from a client other than itself or 000?

the report RPRMORDE but here is the documentation on the copy function so in this respect I dont think this will fully help in this situation - check it against your requirements though!.
Copy trip provision variant in current client
With this function, you can copy a trip provision variant within the current client.
If the target trip provision variant does not yet exist, you need to enter a description in the logon language.
If the trip provision variant already exists, the system deletes the old entries before copying.

Error: Could not create system variants in multiple client system

Hello ,
I am trying to make changes to the variant CUS&_FINAL_AT in se38 , but the error message is coming while saving .
error :Could not create system variants in multiple client system
Could you please help?

Hi Huynh,
Did you ever figure out how to add custom fields to an e-recruit infoset? I need to so same and would love a heads up on how.
Leena

Doesn't load a certain website I have. My site loads on all other computers, and in different browsers on my Mac???

I'm building a store and for some reason FireFox for Mac seems to not want to load it all the time. Sometimes it just stops loading the site even though the server is up and it loads in all other browsers. It only happens on my computer and it's really frikken annoying. It's coming to the point where I will have to switch browsers if I cannot find a fix. It's impossible to work on a site when FireFox refuses to load it at times, but I have NO idea why!!
Chrome for Mac loads the site INSTANTLY, but I like to use FireFox because of the helpful add-ons it has.
I'm not posting the URL here because it is an adult store and I'm not sure if that is allowed.
I just think it's weird that FireFox ONLY does it on this site, and ONLY does it on my computer. It's been doing it for weeks now, since I started the site. The other weird thing is that when I Quit FF completely and restart it, my site loads fine. I can be working on it for hours and then BOOM, FF decides to be a royal P.I.T.A.
Is there any way to troubleshoot this issue?
Thank you.

On your Mac, make sure Automatic Downloads is selected in iTunes / Preferences - Store.
Same for Books on your iPad.
Instructions here > Apple - iCloud - Learn how to set up iCloud on all your devices.

Firefox cannot load pages that other browsers can, but the 'help' page for this issue did not fix the problem.

I am troubleshooting an issue occurring on a family member's pc. Immediately after changing their "search" settings from "Yahoo search" to "Google search", they found that Firefox was unable to load any webpages. After troubleshooting the problem, I found the "Firefox can't load websites but other browsers can" help page, and attempted each of the solutions listed. None of those solutions fixed the issue. Also, I uninstalled and re-installed Firefox; the issue persists. However, the 'new' version of Firefox remembered the tabs left open when the 'old' version was deleted, so some temporary files likely persisted.
Are there any other steps that can be taken, or is Firefox on this computer no longer an option?

Start with this;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''Network.'''
Look for '''Configure How Firefox Connects''' and press the '''Settings''' button.
Check the settings.
Some problems occurs when your Internet security program was set
to trust the previous version of Firefox, but no longer recognizes your
updated version as trusted. Now how to fix the problem: To allow
Firefox to connect to the Internet again;
* Make sure your Internet security software is up-to-date (i.e. you are running the latest version).
* Remove Firefox from your program's list of trusted or recognized programs. For detailed instructions, see
'''[https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet Configure firewalls so that Firefox can access the Internet.]''' {web link}
If there is still a problem, go to that computer and do this;
Type '''about:support''' in the address bar and press '''Enter.'''
Under the main banner, press the button; '''Copy Text To Clipboard.'''.
Then in the reply box at the bottom of this page,
do a right click in the box and select '''Paste.'''
This will show us your system details.
'''No Personal Information Is Collected.'''

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

SAP QUERY does not execute in other client

Hi,
I am working on SAP QUERY on the Quality Assurance and Cust & Dev Client and i am facing a strange thing when i tried to execute the Query from SQ01 ,there i found itis not able to get executed but when i generated the report ,after that it get s executed.
I want to know what are the reasons behind it,please provide me guidelines for solving it.

See, SQ01 can not alone be used.
It is linked with the SQ02 - Funectional Area, where the joins handeled and codes implemented.
Also SQ03 - User Groups.
User Group you can ignore, but Functional Area is must to run a query through SQ01.
When you generate the Functional Area using SQ02, it activates all the objects associated with the Query.
So even if you need same query to some other client sayu in quality or production, you need to import export Functional area first before query or simultaneously.
Regds,
ANil

Firefox will not load in my account, but loads on the other accounts on the same computer. Internet Explorer loads ok in my account

Firefox will not load in my account, but loads on the other accounts on the same computer. Internet Explorer loads ok in my account
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

What is your anti-virus software?

Firefox will not load https (and other websites)

Hello everyone.
I'm running Firefox 18.0 on Windows 7 (64bit). Out of the blue, it started not loading certain webistes. It just spits out blank pages, or does not react when clicking login buttons. The web console will display a GET-message [for facebook: http/1.1. 302 Found 174ms], but hard reloads (CTRL+F5) do not help either.
So far, I have encountered problems with :
- Facebook (blank page)
- Amazon (will not react upon "login")
- GMX (will not react upon "login")
- Mozilla.org (will not let me download Firefox anew OR create a support account)
- My university's library catalogue (will not react upon "login")
- Any of my university's https://-pages
- The Google search in the Firefox task bar.
- EDIT: The e-mail confirmation link this board has send me will not load either.
They will load in Internet Explorer, so here's what I did:
- EVERYTHING from the "Firefox can't load websites, but other browsers can" page, including
Removing and readding FF to my Firewall exceptions,
changing proxy settings,
Dis- and enabling IvP6 settings,
DNS Prefetching,
Clearing cookies, history, browser cache and network cache,
full system scan
- Deleting and Reinstalling Firefox
- Dis- and enabled SPDY in about:config
Please help. I'm at the end of my rope. Thanks.
EDIT: The websites work if I start FF in safe mode. Hope this leads to something.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

How to copy Partner Procedure from Downstream Template to all other clients

Hello,
My problem is SAP std Partner procedures (e.g. OTR) is not available in our freshly installed IS Oil Client. I found out SAP note no. "100151 - TD Partner procedures in IS-Oil bulk shipment" which is identical to my problem. However the said note does not contain how to copy Partner Procedure-OTR from Downstream Template to all other clients.
Can any one guide me in this area?
Thanks & Regards,
Aniruddha

Hello Aniruddha,
Partner determination configuration must be transported by creating a
manual transport.
Please refer to note 69385 and also notes listed in the "Related Notes" section for more details.
Best Regards,
Soumya

Loading Variants to Other Clients

Similar Messages

Maybe you are looking for