LoadVariablesNum problem in different directory

Hey everyone,
This is a slightly strange one (to me at least) and i'd greatly appreciate any pointers.
I have http://www.mydomain.com/index.php setup which includes/displays http://www.mydomain.com/site.swf
When i visit http://www.mydomain.com/index.php the site/flash file displays correctly
I also setup http://www.mydomain.com/subfolder/index.php which sets a couple of variables and then includes http://www.mydomain.com/index.php
When i visit http://www.mydomain.com/subfolder/index.php the flash file loads and then stops at the point that loadVariablesNum usually runs (which prevents the swf file from continuing to load).
I would be massively appreciative if anyone could point me towards what i should be looking into to fix this as i've tried numerous things and am very confused (and wondering if it's somethin completely unrelated that i'm missing as i can't see how this would have any effect on loadVariablesNum!)
Thanks so much,
Dave

I can't be sure since I've not dealt with this twist of including a file from another folder, but it may be a case of failing to target whatever file the loadVariablesNum is trying to access.
When you load an swf into a web page, that page defines the relative path for anything the swf loads.  So it may be a case where you need to place the data file in the same (relative) folder as the subfolder's index.php.  Even though the primary php file loads the swf, the subfolder page is the base of operations.

Similar Messages

  • No backup history was found,choose a different directory path in sharepoint 2010

    Hi,
    i have a backup files with me ,to restore those files the steps i have followed are
    1.sharepoint central administrator
    2.backup and restore option
    3.restore from backup
    4.selecting location of back files
    5.clicking on refresh.
    but i am getting the error called "no backup history was found,choose a different directory path"
    kindly help me to come out from this problem

    Hi Soni ,
    Files extension is .bak and I have full rights to access the files. still I am facing same problem.
    Moreover I tried with following commands in cmd
    >cd  C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\BIN
    >stsadm  –o restore –url   http://win-4ljt0cun8af:12707/smaple2/SitePages/ 
    -filename E:\sharepoint project\PortalBkp\PortalBkp\spbr0000\00000000.bak
    And
    >stsadm  –o restore –directory  E:\sharepoint project\PortalBkp\PortalBkp\spbr0000\   
    -restoremethod  overwrite
    But  I am getting "command line error”
    Kindly help me.
    Thanks,
    Suriya G

  • How we cam naintain different directory file in native SQL

    Hi Friends.
    Pls solve my problem.
    I am writing code using native sql for getting data from different directories as
    first i have only one directory file
    execsql
    SELECT * INTO :WA  FROM file.
    endexec.
    now the costumer has 3 different directory files.
    he need a selection on which he can choose any directory.
    if i used as
    parameters  x type .   for selection screen
    what type i should used and how i use that parameter in Select statement to pass data in WA.
    i am waiting for ur reply.
    regards

    Hi,
    You can place your code inside a loop...endloop.
    Loop at itab into wa_tab.
    exec sql.
    SELECT * INTO :WA FROM :wa_tab-file.
    endexec.
    endloop.
    Regards
    Subramanian

  • Accessing a Class in a Package[in a dir]  via Different Directory

    Hi,
    I am trying to access a class belonging to a package in a directory via another class in a different directory.
    However, there are problems.
    Here is what I do:
    I created a source file ProtectedTest2.java
    package com.java.MyLesson.ch8;
    public class ProtectedTest2
    private int iN1, iN2;
    public ProtectedTest2(){ }
    public ProtectedTest2(int iA, int iB)
    iN1 = iA;
    iN2 = iB;
    public String getNumbers()
    return "Numbers are: "+iN1 +" and "+ iN2;
    } After that, I compiled this file with javac -d C:\\MyUserClasses ProtectedTest2.java. There was no problem.
    I then, created another source file TestPro2.java and imported ProtectedTest2 in TestPro
    import javax.swing.JOptionPane;
    import com.java.MyLesson.ch8.ProtectedTest2;
    public class TestPro2 extends ProtectedTest2
    public TestPro2()
    ProtectedTest2 pro = new ProtectedTest2(8,12);
    JOptionPane.showMessageDialog(null, p.getNumbers() );
    public static void main(String args[])
    new TestPro2();
    System.exit(0);
    } Then, I continue to compile TestPro2.java like this:
    javac -classpath C:\\MyUserClasses TestPro2.java -- there was no problem, but when I try to execute
    TestPro2, the error I got was :
    Exception in thread "main" java.lang.NoClassDefFoundError: com/java/MyLesson/ch8/ProtectedTest2
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader . java:502)
    I understand that the class loader will look into the classpath[current directory] if it cannot find the user- defined class [ProtectedTest2.class] in the standard and optional java packages. Why did the application raise error if I have specified the classpath for the ProtectedTest2.class [which is in C:\MyUserClasses] during the compilation of TestPro2.java ?
    Can someone please correct me and tell me what is the mistake here ?
    Thank you all! :-)

    You need to have C:\MyUserClasses in the class search path both when compiling and running.
    Where the compiler finds a depency class is not saved in the generated .class file, so the runtime is on its own when it needs to find it. If C:\MyUserClasses is not in the class search path, the runtime doesn't know that it should be looking for ProtectedTest2 there. In addition to MyUserClasses you want to search for classes in the current directory (the path ".") so the command to execute TestPro2 is:
    java -classpath .;C:\MyUserClasses TestPro2
    See also the document on how classes are found (if you already haven't)
    http://java.sun.com/j2se/1.4.2/docs/tooldocs/findingclasses.html

  • Using javascript to save a pdf to a different directory and generating a new filename based on form fields in the document.

    I have built the following script in an attempt to create a submit button that will automatically save the document in a different directory on my computer. It will also use the form field data "customer" and "date" to generate the filename. I printed out the variable myPath and it looks like it printed the correct string. I keep getting the following error:
    TypeError: redeclaration of const path
    any help would be much appreciated.
    var customer = this.getField("Customer").value;
    var date = this.getField("Date").value;
    var path = "C:/Users/awilliams/My Documents/Test/"
      var reg = date.match(/(\d+)\/(\d+)\/(\d+)/);
    var myPath= "C:/Users/awilliams/My Documents/Test/" + customer + "_" + reg[1] + "." + reg[2] + "." +
    reg[3] + ".pdf";
    this.saveAs(myPath);

    "path" is a keyword within a PDF you should not use keywords as a name for any other object as a general rule.
    Have you checked the PDF Reference to see how to create a file path name within a PDF,  3.10.1 File Specification Strings page 118?
    Did you carefully read the Acrobat JavaScript Reference for the saveAs method?
    The notes following the description:
    Note: This method can only be executed during a batch or console event. See Privileged versus non-privileged context for details. The event object contains a discussion of JavaScript events.
    (Adobe Reader S): This method is available in Adobe Reader for documents that have Save usage rights.
    How to Save a PDF with Acrobat JavaScript

  • Running a java application from different directory

    I have the file in my
    c:/Folder/Program.java
    I want to compile and run it from D:/ (drive)i.e from different directory.
    Thanks in advance,
    Praveen.

    javac -cp c:\Folder c:\Folder\Program.java
    java -cp c:\Folder Program

  • Extract JAR file to a different directory

    Is it possible to use the jar command to extract the content of a JAR file to a different directory (not the current directory)?
    I want to use this command inside a makefile, looking for the same effect as "unzip example.jar -d directory".
    Thanks in advanced.

    Thanks Chuck, you solved my doubt... It surprises me that JAR doesn't support this option.
    I used the "unzip" command inside the makefile instead, but I wanted to be sure that there wasn't any chance to use "jar" (without using the additional script file).

  • Multiple files in different directory using single FILE adaptor

    Hi Guys,
    How can we handle multiple files having different format(PDF,TXT,EXCEL) and in different directory with the single FILE adaptor.
    I know by using "." we ca get mutilple files, but here tthe files are of different format and in different directory.
    Could you please explain as to how we can handle this scenarios?
    Thanks
    Sahil

    Hi,
    The short answer is - "No".
    The Long Question - "Why do you want to use a SINGLE channel".
    If your idea is to reuse the interface then dont worry... Except for the Senderchannel and Sender agreement all your other objects can be reused ...provided your sender apter converts the different files into the same XML format..
    For TXT you can use the simple file adpater..
    For excel see if you can use save the file as .CSV format...then you can use it directlky by the simple FIle adapter..
    For PDF use conversion agent... Here a blog to get u started on that ->
    /people/shabarish.vijayakumar/blog/2009/05/17/trouble-writing-out-a-pdf-in-xipi
    regards
    Arvind R

  • Can anyone tell me how  to compile java in different directory?

    My javac path file is D:/java/jdk1.5/bin/
    I create java file and save it in different directory eg) java file name is Main.java in f:
    F:/Main
    How can i compile and run the Main java file
    Edited by: Sanjeevi on Mar 4, 2008 9:20 AM

    C:\>D:
    D:\>cd Main
    D:\Main\>d:\java\jdk1.5\bin\javac Main.java
    // ... some output, hopefully no errors
    D:\Main\>D:\java\jdk1.5\bin\java MainAlternatively, make sure that D:\java\jdk1.5\bin is on your path and simply call javac and java.

  • How to include a template from a different directory

    Hi,
    I have a page navigation menu that I placed in a template file.  All the browsing files would then call this template file using cfinclude. 
    I now want to call this file from a different directory.  However, this causes all the url and image links to be wrong because the template file uses relative path off of root directory.
    I have looked at using cfmodule, but it seems that I would have the same issues unless I make the paths absolute, which I am trying to avoid.
    I also thought of prepending to every link in the template file with a directory prefix variable which I passes from the calling files.
    Is there an easy and better way to solve this?
    Thanks!
    Min

    To dynamically get the absolute path from a relative path take a look at expandPath()
    http://livedocs.adobe.com/coldfusion/8/htmldocs/functions_e-g_05.html

  • Importing class from different directory

    Hi, Can anyone tell me how to import a class from a different directory? I have a DGenerator class in ./generator directory.
    I have tried Import generator.DGenerator; to use the DGenerator class. However. I got the error:
    cannot access generator.DGenerator
    bad class file: ./generator/DGenerator.class
    class file contains wrong class: DGenerator
    Please remove or make sure it appears in the correct subdirectory of the classpath.
    Help please.
    Thank you!

    I don't understand why this is a Swing question, but at any rate if you want your DGenerator class to be found in a particular directory, you must do one of two things:
    1. Put that directory in your classpath and just refer to the class as DGenerator.
    2. Make the class belong to the package "generator".

  • How duplicate ora11 on windows to another host with different directory structure

    Hi,
    I need help.
    I want to duplicate db (11.2) running on windows from server A to Server B
    Directory structures on server A and Server B are different;
    my steps
    on server A
    1.backup database plus archivelog delete input;
    2.insert into table t values(1);
    3.commit;
    4.backup archive log all;
    On Server B
    5.copy backup and archive logs from server A to server B (c:\backup\temp)
    6.create folders C:\oracle\oradata\bamboo
    7.oradim –new –sid bamboo -- (verified service is running)
    8. created pfile.ora with param (db_name=bamboo)
    9.SET oracle_SID=bamboo
    10.sqlplus  /as sysdba
    11.startup nomount pfile='(c:\backup\temp\pfile.ora'
    12.C:\oracle\product\11.2.0\db_1\database>rman auxiliary /
    result
    ..connected to auxiliary database: SBDBT02W (DBID=186082786, not open)  --could it be the fact that I tried to execute code bellow?
    My understanding at this point I should be connected to 'bamboo' -- my new database, what steps did I miss?
    I expect
    ..connected to auxiliary database: bamboo ( not mounted)
    bellow is code that I was going to run on Server B
    RUN
      SET NEWNAME FOR DATAFILE 1 TO 'C:\oracle\oradata\bamboo\SYSTEM01.DBF';
      SET NEWNAME FOR DATAFILE 2 TO 'C:\oracle\oradata\bamboo\SYSAUX01.DBF';
      SET NEWNAME FOR DATAFILE 3 TO 'C:\oracle\oradata\bamboo\UNDOTBS01.DBF';
      SET NEWNAME FOR DATAFILE 4 TO 'C:\oracle\oradata\bamboo\USERS01.DBF';
      SET NEWNAME FOR DATAFILE 5 TO 'C:\oracle\oradata\bamboo\EXAMPLE01.DBF';
      DUPLICATE DATABASE TO bamboo
      UNTIL TIME "TO_DATE('11/24/2013 13:18:02', 'MM/DD/YYYY HH24:MI:SS')"
      BACKUP LOCATION 'C:\backup\temp'
      NOFILENAMECHECK;
    when I executed it on Server B ,I got following error
    Starting Duplicate Db at 25-NOV-13
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 11/25/2013 11:27:36
    RMAN-05500: the auxiliary database must be not mounted when issuing a DUPLICATE
    command
    I looking for steps by step instruction for duplicating db to another windows host with different directory structure.
    Thank you
    Alex

    The topic, "Duplicating a Database on a Remote Host with a Different Directory Structure" can be found at http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmdupdb.htm#i1006672
    This information should provide you the step by step process to follow including when on Windows.
    HTH -- Mark D Powell --

  • Restoring Rman backup on New Host with different directory structure

    Hi,
    I have a following scenario to clone the database.
    1. clone the database on new server
    2. source is non - ASM and target is ASM
    3. On source incremental level 0 backup taken on disk connecting to catalog, the backup is moved to target host to different directory structure
    4. source is running on 32-bit Linux two node Rac and Target is running on 64-bit Linux two node Rac
    I did the following steps and getting below error:
    1. I copied incremental Level 0 backup to target server(where we need to build new db) to different directory structure
    2. On target i created pfile and build the instance, as dbf file are in multiple locations in source i put following tow parameters in init.ora of target database
    *.db_file_name_convert =(/u02/oradata/app1p/,+QADATA2/udev/datafile),(/u03/oradata/app1p/,+QADATA1/udev/datafile),(/u12/oradata/app1p/,+QADATA1/udev/datafile,),(/u99/oradata/app1p/,+QADATA1/udev/datafile),(/u09/oradata/app1p/,+QADATA1/udev/datafile),(/u14/oradata/app1p/,+QADATA1/udev/datafile),(/u07/oradata/app1p/,+QADATA1/udev/datafile),(/u06/oradata/prod/,+QADATA1/udev/datafile'),(/u05/oradata/app1p/,+QADATA1/udev/datafile)
    *.log_file_name_convert =("/u99/oradata/app1p/","+QADATA2/udev/onlinelog/")
    3. connected to rman -->> started db in nomount -->> restored the controlfile --> cataloged the backup piece and then i am trying to restore
    All the above steps i did using the Doc id *How To Restore Rman Backups On A Different Node When The Directory Structures Are Different [ID 419137.1]*
    script i am using is :
    RMAN> run {
    2> set until time "to_date('DEC/20/2010 05:30:00','Mon/DD/YYYY HH24:MI:SS')";
    3> allocate channel c1 device type disk;
    4> allocate channel c2 device type disk;
    5> allocate channel c3 device type disk;
    6> allocate channel c4 device type disk;
    7> set newname for datafile 1 to '+QADATA1/UDEV/DATAFILE';
    8> set newname for datafile 2 to '+QADATA1/UDEV/DATAFILE';
    9> set newname for datafile 3 to '+QADATA1/UDEV/DATAFILE';
    10> set newname for datafile 4 to '+QADATA1/UDEV/DATAFILE';
    11> set newname for datafile 5 to '+QADATA1/UDEV/DATAFILE';
    12> set newname for datafile 6 to '+QADATA1/UDEV/DATAFILE';
    13> set newname for datafile 54 to '+QADATA1/UDEV/DATAFILE';
    set newname for datafile 63 to '+QADATA1/UDEV/DATAFILE';
    14> 15> set newname for datafile 67 to '+QADATA1/UDEV/DATAFILE';
    16> set newname for datafile 68 to '+QADATA1/UDEV/DATAFILE';
    17> set newname for datafile 50 to '+QADATA1/UDEV/DATAFILE';
    18> set newname for datafile 39 to '+QADATA1/UDEV/DATAFILE';
    19> set newname for datafile 38 to '+QADATA1/UDEV/DATAFILE';
    20> set newname for datafile 7 to '+QADATA1/UDEV/DATAFILE';
    21> set newname for datafile 9 to '+QADATA1/UDEV/DATAFILE';
    22> set newname for datafile 8 to '+QADATA1/UDEV/DATAFILE';
    23> set newname for datafile 11 to '+QADATA1/UDEV/DATAFILE';
    24> set newname for datafile 10 to '+QADATA1/UDEV/DATAFILE';
    25> set newname for datafile 66 to '+QADATA1/UDEV/DATAFILE';
    26> set newname for datafile 48 to '+QADATA1/UDEV/DATAFILE';
    27> set newname for datafile 47 to '+QADATA1/UDEV/DATAFILE';
    28> set newname for datafile 12 to '+QADATA1/UDEV/DATAFILE';
    29> set newname for datafile 13 to '+QADATA1/UDEV/DATAFILE';
    30> set newname for datafile 14 to '+QADATA1/UDEV/DATAFILE';
    31> set newname for datafile 15 to '+QADATA1/UDEV/DATAFILE';
    32> set newname for datafile 16 to '+QADATA1/UDEV/DATAFILE';
    33> set newname for datafile 18 to '+QADATA1/UDEV/DATAFILE';
    34> set newname for datafile 17 to '+QADATA1/UDEV/DATAFILE';
    35> set newname for datafile 19 to '+QADATA1/UDEV/DATAFILE';
    36> set newname for datafile 69 to '+QADATA1/UDEV/DATAFILE';
    37> set newname for datafile 60 to '+QADATA1/UDEV/DATAFILE';
    38> set newname for datafile 59 to '+QADATA1/UDEV/DATAFILE';
    39> set newname for datafile 55 to '+QADATA1/UDEV/DATAFILE';
    40> set newname for datafile 53 to '+QADATA1/UDEV/DATAFILE';
    41> set newname for datafile 44 to '+QADATA1/UDEV/DATAFILE';
    set newname for datafile 22 to '+QADATA2/UDEV/DATAFILE';
    42> 43> set newname for datafile 21 to '+QADATA2/UDEV/DATAFILE';
    set newname for datafile 20 to '+QADATA2/UDEV/DATAFILE';
    44> 45> set newname for datafile 72 to '+QADATA2/UDEV/DATAFILE';
    46> set newname for datafile 70 to '+QADATA2/UDEV/DATAFILE';
    47> set newname for datafile 65 to '+QADATA2/UDEV/DATAFILE';
    48> set newname for datafile 64 to '+QADATA2/UDEV/DATAFILE';
    49> set newname for datafile 57 to '+QADATA2/UDEV/DATAFILE';
    50> set newname for datafile 56 to '+QADATA2/UDEV/DATAFILE';
    51> set newname for datafile 49 to '+QADATA2/UDEV/DATAFILE';
    52> set newname for datafile 45 to '+QADATA2/UDEV/DATAFILE';
    53> set newname for datafile 26 to '+QADATA2/UDEV/DATAFILE';
    54> set newname for datafile 25 to '+QADATA2/UDEV/DATAFILE';
    55> set newname for datafile 24 to '+QADATA2/UDEV/DATAFILE';
    56> set newname for datafile 23 to '+QADATA2/UDEV/DATAFILE';
    57> set newname for datafile 27 to '+QADATA2/UDEV/DATAFILE';
    58> set newname for datafile 28 to '+QADATA2/UDEV/DATAFILE';
    59> set newname for datafile 29 to '+QADATA2/UDEV/DATAFILE';
    60> set newname for datafile 30 to '+QADATA2/UDEV/DATAFILE';
    61> set newname for datafile 73 to '+QADATA2/UDEV/DATAFILE';
    62> set newname for datafile 32 to '+QADATA2/UDEV/DATAFILE';
    63> set newname for datafile 31 to '+QADATA2/UDEV/DATAFILE';
    64> set newname for datafile 34 to '+QADATA2/UDEV/DATAFILE';
    65> set newname for datafile 33 to '+QADATA2/UDEV/DATAFILE';
    66> set newname for datafile 35 to '+QADATA2/UDEV/DATAFILE';
    67> set newname for datafile 36 to '+QADATA2/UDEV/DATAFILE';
    68> set newname for datafile 37 to '+QADATA2/UDEV/DATAFILE';
    69> set newname for datafile 51 to '+QADATA2/UDEV/DATAFILE';
    70> set newname for datafile 43 to '+QADATA2/UDEV/DATAFILE';
    71> set newname for datafile 40 to '+QADATA2/UDEV/DATAFILE';
    72> set newname for datafile 41 to '+QADATA2/UDEV/DATAFILE';
    set newname for datafile 71 to '+QADATA2/UDEV/DATAFILE';
    set newname for datafile 58 to '+QADATA2/UDEV/DATAFILE';
    set newname for datafile 52 to '+QADATA2/UDEV/DATAFILE';
    set newname for datafile 46 to '+QADATA2/UDEV/DATAFILE';
    set newname for datafile 42 to '+QADATA2/UDEV/DATAFILE';
    73> 74> 75> 76> 77> 78> set newname for datafile 62 to '+QADATA2/UDEV/DATAFILE';
    79> set newname for datafile 61 to '+QADATA2/UDEV/DATAFILE';
    80> set newname for datafile 74 to '+QADATA2/UDEV/DATAFILE';
    81> restore database;
    82> switch datafile all;
    83> recover database;
    84> alter database open resetlogs;
    85>
    86> release channel c1;
    87> release channel c2;
    88> release channel c3;
    89> release channel c4;
    90> }
    Getting the following error, copied lines from the error i am getting.
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    executing command: SET NEWNAME
    Starting restore at 27-DEC-10
    released channel: c1
    released channel: c2
    released channel: c3
    released channel: c4
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of restore command at 12/27/2010 08:09:08
    RMAN-06026: some targets not found - aborting restore
    RMAN-06100: no channel to restore a backup or copy of datafile 74
    RMAN-06100: no channel to restore a backup or copy of datafile 73
    Please advice...
    Thanks,
    Tanveer Mohammed

    If you would like, please refer the link:-
    http://gavinsoorma.com/2010/04/creating-an-asm-duplicate-database-from-a-non-asm-database/

  • Standby database with different directory structure

    Hi,
    sorry to say that we are in desupported version due to some constraint.
    oracle version : 8.1.7.0.0.
    os:sun 5.9
    I need to create physical standby database with different directory structure:
    i have created standby database with same directory structure of primary, now i have requirement to create with different directory structure.
    in oracle 8i we can not give multiple parameter for db_file_name_convert(ORA-01678: parameter db_file_name_convert must be two strings, a pattern and a replacement) and i do have partitions in primary as follows:
    bash-2.05$ df -h
    Filesystem             size   used  avail capacity  Mounted on
    /dev/dsk/c1t0d0s0       20G    14G   5.6G    72%    /
    /proc                    0K     0K     0K     0%    /proc
    mnttab                   0K     0K     0K     0%    /etc/mnttab
    fd                       0K     0K     0K     0%    /dev/fd
    swap                    11G    40K    11G     1%    /var/run
    dmpfs                   11G     0K    11G     0%    /dev/vx/dmp
    dmpfs                   11G     0K    11G     0%    /dev/vx/rdmp
    swap                    11G   656K    11G     1%    /tmp
    /dev/dsk/c1t0d0s3       25G    18G   6.8G    72%    /oracle
    /dev/vx/dsk/suportaldg/oracle1
                            12G    11G   1.1G    91%    /oracle1
    /dev/vx/dsk/suportaldg/oracle2
                            12G   8.1G   3.7G    69%    /oracle2
    /dev/vx/dsk/suportaldg/orapurge
                           200G   182G    17G    92%    /orapurge
    /dev/vx/dsk/suportaldg/oracle3
                            12G    10G   1.9G    85%    /oracle3
    /dev/vx/dsk/suportaldg/oracle4
                            12G    12G    58M   100%    /oracle4
    /dev/vx/dsk/suportaldg/oracle5
                           7.0G   5.9G   1.0G    86%    /oracle5
    /dev/vx/dsk/suportaldg/oracle6
                           7.0G   6.4G   564M    93%    /oracle6
    /dev/vx/dsk/suportaldg/oracle7
                            23G    23G   358M    99%    /oracle7
    /dev/vx/dsk/suportaldg/oracle8
                            13G    13G   165M    99%    /oracle8
    /dev/vx/dsk/suportaldg/oracle9
                            23G    22G   1.4G    94%    /oracle9
    /dev/vx/dsk/suportaldg/oracle10
                            12G  10.0G   1.9G    85%    /oracle10
    /dev/vx/dsk/suportaldg/oracle11
                            39G    36G   2.1G    95%    /oracle11
    /dev/vx/dsk/suportaldg/oracle12
                            39G    38G   1.1G    98%    /oracle12
    /dev/vx/dsk/suportaldg/oracle13
                            68G    65G   2.6G    97%    /oracle13
    /dev/vx/dsk/suportaldg/oracle14
                           200G   199G   1.3G   100%    /oracle14
    /dev/vx/dsk/suportaldg/oracle15
                           200G   196G   3.6G    99%    /oracle15
    /dev/vx/dsk/suportaldg/oracle16
                            70G    64G   5.5G    93%    /oracle16
    /dev/vx/dsk/suportaldg/oracle20
                           7.0G   6.4G   609M    92%    /oracle20
    /dev/vx/dsk/suportaldg/oracle50
                            28G    26G   2.0G    93%    /oracle50
    /dev/vx/dsk/suportaldg/oratranslog
                           185G   165G    19G    90%    /oratranslogso how i can create standby database with different directory structure, help is appreciated.
    Thanks
    Edited by: prakashdba on Mar 5, 2009 11:04 PM

    Looks like very difficult and inform you mgmt about the drawbacks of running olderv ersions
    may be you can try something like this but i dont know whether it is supported or not
    db_file_name_convert=['/dev/vx/dsk/suportaldg/oracle3','/dev/vx/dsk/suportaldg/STDBY/oracle3']
    db_file_name_convert=['/dev/vx/dsk/suportaldg/oracle4','/dev/vx/dsk/suportaldg/STDBY/oracle4']
    db_file_name_convert=['/dev/vx/dsk/suportaldg/oracle5','/dev/vx/dsk/suportaldg/STDBY/oracle5']

  • Running  sql scripts from different directory

    Hi
    I have sql scripts in different directories as follows:
    D:\myapp\sql
    - load.sql
    - init.sql
    D:\myapp\sql\schema
    -users.sql
    -structure.sql
    D:\myapp\sql\populate\
    - data1.sql
    - data2/sql
    load.sql call all the other scripts as below:
    @init.sql
    @schema\users.sql
    @schema\structure.sql
    @populate\data1.sql
    @populate\data2.sql
    All my scripts run correctly when I run load.sql from D:\myapp\sql on comand prompt.
    I need a way to run this script from a different directory say D:\ or C:\
    I am writing a installer which will execute from a different directory.
    Right now I get a file not found error for scripts within schema an populate folder.
    Please let me know how can I make this work from a different directory.
    Thanks
    kelvin

    Hi peter. i think you cannot run files spread across different locations.
    --the method which u specified always looks to the defined path                                                                                                                                                                                                                                                                                       

Maybe you are looking for

  • Go URL masking

    Hi, Is it possible to mask the URL of a report called using Go URL? I have a link on a report that opens a new window and calls another report using Go URL, passing in values from the first report. I have a requirement to mask/scramble this URL so th

  • Ipod touch won't charge past 10%? what can I do?

    ipod touch won't charge past 10%? what can I do?

  • Control service vendor via ML33

    Hi Gurus, Please your help with the following. I've entered service conditions in ML33 for a particular activity/vendor. When I create a requisition with the determine source determination flag active, the vendor is effectively derived correctly. Is

  • MEDIA CARD CANT BE READ DUE TO FATAL ERRORS

    Hi, I took my blackberry 9630 tour to the repairers to fix my trackball because it wasn't functioning. They fixed my trackball but the problem is when I insert my media card on the phone, I got a message sayng "media card cannot be accessed due to fa

  • Calling a stored procedures and using its output parameters in a report

    Hi,, I have a procedure defined in a package on the database. This procedure returns a number of output parameters. How do I call this procedure and use the output parameters in my report ? Thanks, Mark