LOB array fetch help required

Hi All
I am developing an OCCI application to read data from oracle 10g server. I used setdatabuffer() to allocate resultset buffers and then fetch data into them using resultset->next(rowCount) method. It works perfectly with all data types(NUMBER,CHAR,VARCHAR,TIMESTAMP etc) but i can't make it work with LOBs. Currently whole data from lobs is read into buffers, its fine for small entries but for LOBS with large size I get truncation error. Is there some way i can retrieve an array of LOB objects and then use them to read data in manageable chunks.
thanks
Adi

Dear KaviSqlHelp
Elaborate your requirement more clearly like TableA have millions of records and i need to compare with TableB etc..
only then someone can propose a closer answer for your question.
To simply save the records into excel, you can write click the result set and save rows as, also you can use SQL Server Import/Export wizard also.
If both tables exist in the database itself, you can make join on the key columns to retrieve the columns from another master table.
If you are not satisfied with my answer, please post more details about your requirement..
Based on my assumtion you may need something like below, you may have tableA, tableB and col1,col2,col3 is your required field on which the data needs to be null
Select col1,col2
from tableA
inner join TableB on TableA.id = TableB.id
where col1 is null and col2 is null
Working as a Senior Database Analyst & Architect at Ministry of Higher Education in KSA

Similar Messages

Help required in Export

Hi All,
I am trying to export a schema in .dmp format. But every time i receive an error
EXP-00056: ORACLE error 932 encountered
ORA-00932: inconsistent datatypes: expected BLOB, CLOB got CHAR
EXP-00000: Export terminated unsuccessfully
Please refer below for other details
dt1h1:/usrs/sched$exp
Export: Release 10.2.0.2.0 - Production on Fri Apr 4 07:44:29 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: owner@prpt
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Enter array fetch buffer size: 4096 > 4096
Export file: expdat.dmp > /usrs/sched/owner_04042008.dmp
(2)U(sers), or (3)T(ables): (2)U > u
Export grants (yes/no): yes > y
Export table data (yes/no): yes > y
Compress extents (yes/no): yes > y
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses UTF8 character set (possible charset conversion)
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user OWNER
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user OWNER
About to export OWNER's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
EXP-00056: ORACLE error 932 encountered
ORA-00932: inconsistent datatypes: expected BLOB, CLOB got CHAR
EXP-00000: Export terminated unsuccessfully
dt1h1:/usrs/sched$Please help me to sort this out. I dont have any object or column with BLOB and CLOB. Why i am receiving this error
Thanks in advance

Try one of these:
Solution #1
Run following scripts while connected as SYS user:
sqlplus /nologSQL> connect / as sysdba
SQL> @?/rdbms/admin/catmetx.sql
SQL> @?/rdbms/admin/utlrp.sql
SQL> exitAfterwards, re-run the export.
or:
Solution #2
Run the export with the Export DataPump client. E.g.:
expdp system/manager directory=my_dir dumpfile=expdp_full.dmp logfile=expdp_full.log full=y

PRINT WORKBENCH HELP REQUIRED!!

HI..
I AM DESGINING A METER READING FORM USING THE PRINT WORKBENCH TOOL.
MY SPECIFIC PROBLEM IS HOW TO DISPLAY THE DATA THAT IS POPULATED IN THE DDIC STRUCTURE OF THE FORM CLASS.
IN THIS CASE THE DDIC STRUCTURE IS ISU_DM_MR_ORDER_S_MR_UNIT AND I WANT TO PRINT INFORMATION SUCH AS BUSINESS PARTNER NO, INSTALLATION NO.
ALL THIS DATA IS THERE IN THE STRUCTURE BUT I AM NOT ABLE TO EXTRACT THIS AS IT IS COMPLEX CONSISTING OF MANY TABLE TYPES IN IT.
PLEASE HELP ME REGARDING THIS..
THNX IN ADVANCE

Hi
I think the std program may not be using the logic mentioned by you to fetch the storage location
"Need to read the NAME2 from the storage location on the Stock transfer order which is the reference document for Delivery.
Take the first item and use the SLOC from it. You can use LIPS-VGBEL for STO# and LIPS-VGPO for item #.
Input will be delivery item. once you find the STO read EKPO-LGORT for sloc."
So better create the PROGRAM LINES in the related window and write the code to fetch the storage location as per the above logic
and fetch the address details(ADRNR) of storage location from T001L table and fetch the required field from the ADRC table and display
<b>Reward points for useful Answers</b>
Regards
Anji

Crystal Reports for Enterprise - SQL Command - Array Fetch Size

We're attempting to migrate a report created in Crystal Reports 2013 Support Pack 3 Version 14.1.3.1257 to...
Crystal Reports for Enterprise Version 14.1.3.1300 Build: 2013 Support Pack 3 Patch 1
The originating report is successfully connecting and returning data from MySQL through the MySQL ODBC 3.51 Driver (3.51.30.00), using a SQL Command
When opening up this report in CR for E and running the report against the same database and the same version of database driver, we get the following Crystal Reports error:
Crystal Reports
A problem was encountered
The following error has occurred while trying to retrieve the data:
Error on Fetch : Largevarchar and Largevarbinary data cannot retrieved as variable-length data if the array fetch size is not set to 1.
Please check with your System Administrator that the data source is correctly configured.
How would we check and where would we adjust the array fetch size within Crystal Report for Enterprise?
Thank you

Hi Vitaly,
I had not yet tried creating a new report based on the query, within CR for E, but I did now upon your request\suggestion. Yes, it fails as well with a brand new report..same new error as above: "Non Supported Datatype"
I've pasted the SQL we are using below. I just tried running this exact query natively through MyPHPAdmin, and also creating a brand new report with Crystal Reports 2013 against the same ODBC driver that I am trying to use within CR for E. In both cases the query was accepted and ran successfully.
Driver info:
MySQL ODBC 3.51 Driver - Version 3.51.30.00
I have also tried 2 newer versions of the driver:
MySQL ODBC 5.3 ANSI - Version 5.03.02.00
MySQL ODBC 5.3 Unicode - Version 5.03.02.00
...where I also configure each within the Information Design Tool so that the "Array Fetch Size"= 1
I receive the same "Non Supported Datatype" error for these drivers as well. The MySQL server version is: 5.1.73-0ubuntu0.10.04.1-log
Protocol Version: 10
MySQL charset: UTF-8
Here is the query:
SELECT ft.seq_id, ft.ticket_date, ft.posttotal,
wl.name as current_approval_level,
TIMESTAMPDIFF(DAY,ft.ticket_date,NOW()) AS Days_Since_TicketDate,
TIMESTAMPDIFF(DAY,ft.date_created,NOW()) AS Days_Since_Created,
TIMESTAMPDIFF(DAY,wph.workflow_date,NOW()) AS Days_Waiting_Your_Approval,
ft.internal_comments
FROM ticket AS ft
LEFT JOIN unit AS unit ON (ft.unit_id = unit.id)
LEFT JOIN unit_district AS udist ON (udist.unit_id = unit.id AND (udist.effective_date IS NULL OR udist.effective_date = 0 OR udist.effective_date <= ft.ticket_date)
AND (udist.expiry_date IS NULL OR udist.expiry_date = 0 OR udist.expiry_date >= ft.ticket_date))
LEFT JOIN workflow_document_process_map AS wdpm ON (ft.id = wdpm.document_id AND wdpm.document_type_id = 1)
LEFT JOIN workflow_process AS wp ON (wp.id = wdpm.workflow_process_id)
LEFT JOIN workflow_rule AS wr ON (wp.workflow_schema_id = wr.workflow_schema_id AND wp.workflow_level_id = wr.workflow_level_id AND wr.workflow_activity_id = 2 AND (wr.effective_date IS NULL OR wr.effective_date = 0 OR wr.effective_date <= ft.ticket_date) AND (wr.expiry_date IS NULL OR wr.expiry_date = 0 OR wr.expiry_date >= ft.ticket_date))
LEFT JOIN workflow_rule AS wr2 ON (wp.workflow_schema_id = wr2.workflow_schema_id AND wp.workflow_level_id = wr2.workflow_level_id AND wr2.workflow_activity_id = 4 AND (wr2.effective_date IS NULL OR wr2.effective_date = 0 OR wr2.effective_date <= ft.ticket_date) AND (wr2.expiry_date IS NULL OR wr2.expiry_date = 0 OR wr2.expiry_date >= ft.ticket_date))
LEFT JOIN workflow_process_history AS wph ON (wph.workflow_process_id = wp.id)
LEFT JOIN ticket_attachment AS ftattach ON (ft.id = ftattach.ticket_id AND ftattach.attachment_type_id = 2)
LEFT JOIN person AS p ON (ft.supervisor_id = p.id)
LEFT JOIN person AS p2 ON (ft.head_office_contact_id = p2.id AND (p2.effective_date IS NULL OR p2.effective_date = 0 OR p2.effective_date <= ft.ticket_date)
AND (p2.expiry_date IS NULL OR p2.expiry_date = 0 OR p2.expiry_date >= ft.ticket_date))
LEFT JOIN person AS p3 ON (ft.sales_person_id = p3.id)
LEFT JOIN person_company_sales AS pcs ON (p2.id = pcs.client_person_id AND pcs.company_id = ft.client_company_id)
LEFT JOIN person AS p4 ON (ft.created_by = p4.id)
LEFT JOIN person AS p5 ON (ft.well_site_supervisor_id = p5.id)
LEFT JOIN division AS d ON (ft.division_id = d.id)
LEFT JOIN district AS dist1 ON (ft.district_id = dist1.id)
LEFT JOIN district AS dist2 ON (udist.district_id = dist2.id)
LEFT JOIN company AS c ON (ft.client_company_id = c.id)
LEFT JOIN province AS prov ON (ft.job_province_id = prov.id)
LEFT JOIN ticket_attachment AS ftattach2 ON (ft.id = ftattach2.ticket_id AND ftattach2.attachment_type_id != 2)
LEFT JOIN locale_currency AS lc ON (lc.id = ft.locale_currency_id)
LEFT JOIN operation_type AS ot ON (ot.id = ft.operation_type_id)
LEFT JOIN incident AS i ON (i.ticket_id = ft.id)
LEFT JOIN invoice_type AS it ON (it.id = ft.invoice_type_id)
LEFT JOIN workflow_level AS wl ON (wl.id = wp.workflow_level_id)
LEFT JOIN company AS dist1_company ON (dist1_company.id = dist1.internal_company_id)
WHERE 1
AND ( pcs.sales_person_id = 2113 AND pcs.effective_date <= ft.ticket_date AND ( pcs.expiry_date >= ft.ticket_date OR pcs.expiry_date = '0000-00-00 00:00:00' OR pcs.expiry_date IS NULL) )
AND ft.closed_flag <> 1 AND (wr2.id IS NOT NULL OR wr2.id != 0)
AND ft.commit_flag = 1
AND ft.dispatch_status = 0
AND dist1_company.country_id = 1
AND wr2.role_id = 2
GROUP BY ft.id
ORDER BY ticket_date ASC, ft.id ASC
Thanks you for your help.

XSLT mapping Help Required.

XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHAR

Hi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
    xmlns:ns1="http://XYZ.com/Test">
    <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
        <ns1:MT_XSLT_Target>
            <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
            <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
            </Name>
            <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
                /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
            <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
        </ns1:MT_XSLT_Target>
    </xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat

Urgent help required: Query regarding LC Variables

Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AM

LC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type.

Help required - Sales order item is partially delivered but the item grayed

I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
Item 1 confirmed qty 1 and delivered qty is 1
Item 2 confirmed qty 10 and delivered qty 10
Item 3 confirmed qty 1 and delivered qty is 1
Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
even if I do ATP the qty is not confirming for the remaining 11 pieces.
Why is that? How to make that item out from GRAY.
How to confirm the remaining 11 qty for that item.
Help required as early as possible.
Appreciate ur help guys
Radha

hi Radha, how are you ?
     ---the partial deliveries in master data must have not been mentioned.
     ---the deliveries should be upto target quantity.
     ---check order type, item category and schedule line category.
     ---check unrestricted stock availability.
thank you
regards
Khera.

REPORT PERFORMANCE TUNING:Array FETCH SIZE

Hi Folks,
DOES any one has an idea about   array fetch size in CRYSTAL REPORTS XI connected to oracle database.
   I have two basic questions here
           1.   What is the default array fetch size in CRYSTAL XI
           2.   how to change this parameter.
Thanks In advance
Mani

Please re-post if this is still an issue to the Data Connectivity - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly

Search Help with in a serach help required in SRM 4.0

Hi,
Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT.
My analysis:
The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
With Regards,
Prakash Kamath

Hi Prakash,
I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
Thank you very much.
Best regards,
Danijela ZIvanovic

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
Kelvin

OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

How To Switch On Array Fetch in JDev3.0

Hi,
I would like to use the Array Fetch in JDeveloper 3.0.
How do I use the Array Fetch in JDev3.0?
I can use the simlary thing and set Arrarysize in Option Menu of SQL*PLUS.
I can also use this on Oracle Forms's RunTime program.
Thanks.
Alan

Array fetch is a JDBC feature which you have to program following the JDBC-specific syntax (resultset). As such, we do not have a way to specify the arraySize in a menu. An alternative for you would be to use the InfoBus Wizard.
Thanks,
-Kishore

Help required in Weblogic 6 - Creation & Configuration of Web Application

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Help required network configuration - Gateway route settings get erased on reboot.

Oracle Linux 7
Linux myhostname 3.8.13-35.3.1.el7uek.x86_64 #2 SMP Wed Jun 25 15:27:43 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
#cat /etc/sysconfig/network-scripts/ifcfg-eno16780032
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="eno16780032"
UUID="2d1107e3-8bd9-49b1-b726-701c56dc368b"
ONBOOT="yes"
IPADDR0="34.36.140.86"
PREFIX0="22"
GATEWAY0="34.36.143.254"
DNS1="34.36.132.1"
DNS2="34.34.132.1"
DOMAIN="corp.halliburton.com"
HWADDR="00:50:56:AC:3F:F9"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
NM_CONTROLLED="no"
#route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         34.36.143.254   0.0.0.0         UG    0      0        0 eno16780032
34.36.140.0     0.0.0.0         255.255.252.0   U     0      0        0 eno16780032
169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eno16780032
When I reboot the machine, the first line in route table gets erased, I then run:
#route add default gw 34.36.143.254
After which network works fine.
Help required. I don't want to use NetworkManager.

The following might be useful:
https://access.redhat.com/solutions/783533
"When transitioning from NetworkManager to using the network initscript, the default gateway parameter in the interface's ifcfg file will be depicted as 'GATEWAY0'. In order for the ifcfg file to be compatible with the network initscript, this parameter must be renamed to 'GATEWAY'. This limitation will be addressed in an upcoming release of RHEL7."
NetworkManager is now the default mechanism for RHEL 7. Personally I don't quite understand this, because as far as I can gather it is a program for systems to automatically detect and connect to known networks. I think such functionality can be useful when switching between wireless and wired networks, but for a server platform, I wonder.

Help Required - Oracle AS 10g

hello,
i have just downloaded oracle 10g softwares ...
i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
a friend of mine told me that i need to install application server in order to run forms ...
1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
2ndly i m facing problems in installation of Oracle AS 10g ...
i have studied online documentation but it ain't so helpfull for me ...
it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
what should i do ... urgent help required ...
regards,
yasir ([email protected])

@ brusardl and rkogelhe
thanx for replying ...
brusardl
i didn't changed da port while installing Oracle AS ...
inspite i stopped all services using/listening from dat port ...
now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
rkogelhe
can u plz tell me what is BI version of Forms ...
and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
Another Problem:
I re-installed Database, Developer suite and then Oracle AS infrastructure ...
everthing went fine ...
when i installed Oracle AS Middle Tier - Business Intelligence & Forms
during installation ... some configuration assistants failed/skipped ...
da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
is dis a installation useless ... can i fix dis ?
regards,
yasir

LOB array fetch help required

Similar Messages

Maybe you are looking for