How To Switch On Array Fetch in JDev3.0

Hi,
I would like to use the Array Fetch in JDeveloper 3.0.
How do I use the Array Fetch in JDev3.0?
I can use the simlary thing and set Arrarysize in Option Menu of SQL*PLUS.
I can also use this on Oracle Forms's RunTime program.
Thanks.
Alan

Array fetch is a JDBC feature which you have to program following the JDBC-specific syntax (resultset). As such, we do not have a way to specify the arraySize in a menu. An alternative for you would be to use the InfoBus Wizard.
Thanks,
-Kishore

Similar Messages

REPORT PERFORMANCE TUNING:Array FETCH SIZE

Hi Folks,
DOES any one has an idea about   array fetch size in CRYSTAL REPORTS XI connected to oracle database.
   I have two basic questions here
           1.   What is the default array fetch size in CRYSTAL XI
           2.   how to change this parameter.
Thanks In advance
Mani

Please re-post if this is still an issue to the Data Connectivity - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly

AS: how to switch between screen modes?

hi @ all,
does anybody know how to switch between the 4 screen modes in ps cs3?
- standard
- maximized
- full screen with menubar
- full screen
I looked around but could not find anything discribing a way doing this by applescript.
the only thread I found
http://www.adobeforums.com/webx/.3bc85cba/0
refers to javascript but I was not able to adopt it.
thanks for any help
Claus

To do it with AS only, you need to simulate the "f" key with System Events:
tell application "System Events"
tell process "Adobe Photoshop CS3" to keystroke "f"
end tell
That will loop thought the screen modes as if you did it manually.
To run the JS from the other thread, you need to use the "do javascript" command. Remember to escape all the quotes in the JS:
tell application "Adobe Photoshop CS3"
do javascript "var screenModeOptions = new Array(4);
     screenModeOptions[0] = \"screenModeStandard\";
     screenModeOptions[1] = \"screenModeMaximized\";
     screenModeOptions[2] = \"screenModeFullScreenWithMenubar\";
     screenModeOptions[3] = \"screenModeFullScreen\";
     applyScreenMode(screenModeOptions[0]);
     function applyScreenMode(mode){
      var desc = new ActionDescriptor();
      var ref = new ActionReference();
      var menuID = stringIDToTypeID( mode );
      ref.putEnumerated( charIDToTypeID( \"Mn \" ), charIDToTypeID( \"MnIt\" ), menuID );
      desc.putReference( charIDToTypeID( \"null\" ), ref) ;
      executeAction( charIDToTypeID( \"slct\" ), desc, DialogModes.NO );
end tell
The JS is the better solution if you wanted to skip directly to the desired screen mode without looping through the others.
Carl.

Crystal Reports for Enterprise - SQL Command - Array Fetch Size

We're attempting to migrate a report created in Crystal Reports 2013 Support Pack 3 Version 14.1.3.1257 to...
Crystal Reports for Enterprise Version 14.1.3.1300 Build: 2013 Support Pack 3 Patch 1
The originating report is successfully connecting and returning data from MySQL through the MySQL ODBC 3.51 Driver (3.51.30.00), using a SQL Command
When opening up this report in CR for E and running the report against the same database and the same version of database driver, we get the following Crystal Reports error:
Crystal Reports
A problem was encountered
The following error has occurred while trying to retrieve the data:
Error on Fetch : Largevarchar and Largevarbinary data cannot retrieved as variable-length data if the array fetch size is not set to 1.
Please check with your System Administrator that the data source is correctly configured.
How would we check and where would we adjust the array fetch size within Crystal Report for Enterprise?
Thank you

Hi Vitaly,
I had not yet tried creating a new report based on the query, within CR for E, but I did now upon your request\suggestion. Yes, it fails as well with a brand new report..same new error as above: "Non Supported Datatype"
I've pasted the SQL we are using below. I just tried running this exact query natively through MyPHPAdmin, and also creating a brand new report with Crystal Reports 2013 against the same ODBC driver that I am trying to use within CR for E. In both cases the query was accepted and ran successfully.
Driver info:
MySQL ODBC 3.51 Driver - Version 3.51.30.00
I have also tried 2 newer versions of the driver:
MySQL ODBC 5.3 ANSI - Version 5.03.02.00
MySQL ODBC 5.3 Unicode - Version 5.03.02.00
...where I also configure each within the Information Design Tool so that the "Array Fetch Size"= 1
I receive the same "Non Supported Datatype" error for these drivers as well. The MySQL server version is: 5.1.73-0ubuntu0.10.04.1-log
Protocol Version: 10
MySQL charset: UTF-8
Here is the query:
SELECT ft.seq_id, ft.ticket_date, ft.posttotal,
wl.name as current_approval_level,
TIMESTAMPDIFF(DAY,ft.ticket_date,NOW()) AS Days_Since_TicketDate,
TIMESTAMPDIFF(DAY,ft.date_created,NOW()) AS Days_Since_Created,
TIMESTAMPDIFF(DAY,wph.workflow_date,NOW()) AS Days_Waiting_Your_Approval,
ft.internal_comments
FROM ticket AS ft
LEFT JOIN unit AS unit ON (ft.unit_id = unit.id)
LEFT JOIN unit_district AS udist ON (udist.unit_id = unit.id AND (udist.effective_date IS NULL OR udist.effective_date = 0 OR udist.effective_date <= ft.ticket_date)
AND (udist.expiry_date IS NULL OR udist.expiry_date = 0 OR udist.expiry_date >= ft.ticket_date))
LEFT JOIN workflow_document_process_map AS wdpm ON (ft.id = wdpm.document_id AND wdpm.document_type_id = 1)
LEFT JOIN workflow_process AS wp ON (wp.id = wdpm.workflow_process_id)
LEFT JOIN workflow_rule AS wr ON (wp.workflow_schema_id = wr.workflow_schema_id AND wp.workflow_level_id = wr.workflow_level_id AND wr.workflow_activity_id = 2 AND (wr.effective_date IS NULL OR wr.effective_date = 0 OR wr.effective_date <= ft.ticket_date) AND (wr.expiry_date IS NULL OR wr.expiry_date = 0 OR wr.expiry_date >= ft.ticket_date))
LEFT JOIN workflow_rule AS wr2 ON (wp.workflow_schema_id = wr2.workflow_schema_id AND wp.workflow_level_id = wr2.workflow_level_id AND wr2.workflow_activity_id = 4 AND (wr2.effective_date IS NULL OR wr2.effective_date = 0 OR wr2.effective_date <= ft.ticket_date) AND (wr2.expiry_date IS NULL OR wr2.expiry_date = 0 OR wr2.expiry_date >= ft.ticket_date))
LEFT JOIN workflow_process_history AS wph ON (wph.workflow_process_id = wp.id)
LEFT JOIN ticket_attachment AS ftattach ON (ft.id = ftattach.ticket_id AND ftattach.attachment_type_id = 2)
LEFT JOIN person AS p ON (ft.supervisor_id = p.id)
LEFT JOIN person AS p2 ON (ft.head_office_contact_id = p2.id AND (p2.effective_date IS NULL OR p2.effective_date = 0 OR p2.effective_date <= ft.ticket_date)
AND (p2.expiry_date IS NULL OR p2.expiry_date = 0 OR p2.expiry_date >= ft.ticket_date))
LEFT JOIN person AS p3 ON (ft.sales_person_id = p3.id)
LEFT JOIN person_company_sales AS pcs ON (p2.id = pcs.client_person_id AND pcs.company_id = ft.client_company_id)
LEFT JOIN person AS p4 ON (ft.created_by = p4.id)
LEFT JOIN person AS p5 ON (ft.well_site_supervisor_id = p5.id)
LEFT JOIN division AS d ON (ft.division_id = d.id)
LEFT JOIN district AS dist1 ON (ft.district_id = dist1.id)
LEFT JOIN district AS dist2 ON (udist.district_id = dist2.id)
LEFT JOIN company AS c ON (ft.client_company_id = c.id)
LEFT JOIN province AS prov ON (ft.job_province_id = prov.id)
LEFT JOIN ticket_attachment AS ftattach2 ON (ft.id = ftattach2.ticket_id AND ftattach2.attachment_type_id != 2)
LEFT JOIN locale_currency AS lc ON (lc.id = ft.locale_currency_id)
LEFT JOIN operation_type AS ot ON (ot.id = ft.operation_type_id)
LEFT JOIN incident AS i ON (i.ticket_id = ft.id)
LEFT JOIN invoice_type AS it ON (it.id = ft.invoice_type_id)
LEFT JOIN workflow_level AS wl ON (wl.id = wp.workflow_level_id)
LEFT JOIN company AS dist1_company ON (dist1_company.id = dist1.internal_company_id)
WHERE 1
AND ( pcs.sales_person_id = 2113 AND pcs.effective_date <= ft.ticket_date AND ( pcs.expiry_date >= ft.ticket_date OR pcs.expiry_date = '0000-00-00 00:00:00' OR pcs.expiry_date IS NULL) )
AND ft.closed_flag <> 1 AND (wr2.id IS NOT NULL OR wr2.id != 0)
AND ft.commit_flag = 1
AND ft.dispatch_status = 0
AND dist1_company.country_id = 1
AND wr2.role_id = 2
GROUP BY ft.id
ORDER BY ticket_date ASC, ft.id ASC
Thanks you for your help.

How to switch off automatic creation of the business partner?

Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya

How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

I wonder the Format Tables macros on my site could be adapted?
http://www.grainge.org/pages/authoring/word/word_macros.htm
If not, I have used Macro Express to format tables in Rh. No reason it could not be used in Word.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to switch between messages in the BlackBerry Hub

With the release of BlackBerry 10 version 10.1, we’ve added a new gesture to the BlackBerry Hub that allows you to quickly switch between your next and previous messages. It’s simple: while viewing a message drag your finger from the left to the right and in one continuous motion swipe up or down.
For example, in the following screenshot you’ll notice I am viewing ‘Test 08”. To get to the next message, “Test 09”, all I need to do is swipe from left to right (red arrow) followed by swiping up (green arrow) in a single motion. To switch to the previous message, “Test 07”, I complete the same gesture, but swipe down instead (blue arrow).
Tip: Using a BlackBerry Q10 or Q5? On top of using this gesture to switch between messages, you also have the option of pressing the N key to view your next message, or the P key to view a previous message.
If this gesture doesn’t appear to be working on your device, verify you are using BlackBerry 10.1.0.4181 or later by going to Settings > About and reviewing the OS Version field. If the OS Version is lower than 10.1.0.4181, check for updates by going to Settings > Software Updates.
For more details about the availability of BlackBerry 10.1, check out Inside BlackBerry’s post on BlackBerry 10 Software Updates.
VIA | helpblog.blackberry.com
http://helpblog.blackberry.com/2013/10/how-to-switch-between-messages-in-the-blackberry-hub/
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I would set up a variable before you get to that node, lets call it $EmpID and assign to it the value of the prompt you want to play lets say 12345 which would be the library promptID. It will then play prompt, get digits, and once you validate if it goes through the expression that flags it as invalid, in that node re-declare the variable, but this time give it the value of the new prompt you want to play, then sent it back to the node which will then play the new prompt and collect the digits.

How to switch off screen while playing songs in 5G iPod

Any ideas how to switch off the screen completely (not just reducing the brightness) while playing the songs.
i'm thinking that this could improve the battery life !!!
30GB Video iPod Windows XP Pro

No you can not do this; you can only turn off the Backlight.

HT201209 Please help, tried to redeem an App Store gift card for $15.00. It worked when I put it in earlier but I was still charging purchases to my credit card. I did not see how to switch over to the gift card. Credit is gone and code now invalid. W

I need help with redeeming a $15 App Store certificate. I tried to redeem earlier in the day and it was credited to my account. I could not figure out how to switch payment from my credit card to the gift card credit. Later on in the day I see the credit is completely gone and now the card is invalid. Nothing was purchased with the gift card so I want to know where the credit went. I also have$5 credited to my Apple ID from a past gift card that I can't access. What can I do. Is there a customer service number???

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How to switch off solution checks

Hello. I have a problem. When I link support message to solution in Context tab, the system perform checks of linked solution. And there are a lot of error message in Support message appears, like this:
'Business process not available, check your entry'
'Business process step not available for business process &1'
'Software component not available, check your entry'
How to manage this checks or how to switch of this checks?
Edited by: Dmitry Udot on Feb 10, 2010 9:42 AM

I have fixed this problem myself. It ocures due to deactivation of PPF actions releted with questionary.
Edited by: Dmitry Udot on Feb 11, 2010 1:30 PM

How to switch off internal macbook screen when using external monitor(s)

as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
(would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments) when working with big external screen(s) connected to the laptop ?

this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

How to switch off scroll and zoom functions of touchpad on Satellite L

Hi.
Can anyone tell me how to switch off the scroll and zoom functions for the Synaptics Touchpad v7.2 .
Can't seem to do it via the Control Panel.
Any suggestions.

Hi buddy,
> Can't seem to do it via the Control Panel.
You can only disable the virtual scrolling function if the touchpad driver is installed properly. The driver provides extended functions and allows you to disable/enable special features. If you dont have installed the touchpad driver download it on official Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Then navigate to control panel as the previous user wrote for disabling the scroll function.
Can you find it now?

How to switch off the IPad 2

I can't switch off my IPad 2. there is the Backup ICloud note open which I can't cancel and this creating a blok to switch off the IPad, in fact when I try to close with conventional method I can't slide the stop icon.
Some body know how to switch of with a different method?
Stefano

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

How to switch off the pop-up message in rspcm

Hi there,
Does anyone know how to switch off the pop-up message in rspcm?
The monitoring user shouldn't get the pop-up below anymore:
Statusänderung des Requests Sollen Folge-Events ausgelöst werden?
The pop-up in english might be
status change of request - trigger subsequent processing? or similar
We would like to outsource the process chain monitoring (rspcm) to our operating.
But operating shouldn't deal with the pop-up above and make decisions especially when delta infopackages are involved.
Thanks for your help in advance.
Regards,
Wolfgang Smetana

Elena,
Is the subsequent process defined on success or failure ? if that is not defined - you might come across this message.....
Arun

How to switch off the error sound in Triversity

Hi
How to switch off the error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HP

Mohammed,
There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
You should be golden right after the reboot.
Hope this helped,
Alfredo Carigga

How To Switch On Array Fetch in JDev3.0

Similar Messages

Maybe you are looking for