LOB Overflow
I created a content area and uploaded around 900 MB of data. Now it gives an error when I try to further upload any files. It shows that SYS.LOB....... maxextents exceeded.
Any clues???
Please help
Hi,
seems to me it's a general database issue: you've reached/filled up the maxextents of your tablespace. Increase your maxextents and maybe increase your tablespace.
Good luck, Tony
Similar Messages
-
UDT Lob buffer overflow in Initial Load
Hi All
I'm doing an intial load for one table which is having ORDIMAGE column , Here is my prm details :
====================================================================
EXTRACT INIT_FFU
-- ENVIRONMENT PROFILES
setenv (ORACLE_SID = "trfdv")
setenv (NLS_LANG = "AMERICAN_AMERICA.AR8ISO8859P6")
setenv (ORACLE_HOME = "/u01/oracle/product/10.2.0/db_2")
SETENV (NLS_DATE_FORMAT = "DD/MM/YYYY HH24:MI:SS")
-- DATABASE LOGIN
USERID gg, PASSWORD *****
-- GG PARAMETER CONFIGURATION
RMTHOST <remote_host> , MGRPORT 7809 , TCPBUFSIZE 200000000, TCPFLUSHBYTES 200000000 , COMPRESS
RMTFILE /u04/GG_TRAILS/ff , MAXFILES 9999 , MEGABYTES 100 , PURGE , FORMAT RELEASE 11.2
DBOPTIONS LOBBUFSIZE 10485760
STATOPTIONS RESETREPORTSTATS
REPORTROLLOVER AT 00:01
REPORTCOUNT EVERY 10 SECONDS, RATE
DISCARDFILE /u01/GG/dirrpt/ffu.dsc, APPEND
-- FFU TABLES
TABLE TRAFFIC.TF_FFU_RADAR_PICTURES;
====================================================================
The issue is at once it gives the following error
UDT Lob buffer overflow, needed: 19920358, allocated: 10485760
I know that the maximum is 10485760 ,
so how can I resolve this issue
GG version is 11.2.1.0.1
DB version is 10.2.0.4
Thanks In AdvanceAny Luck ...
-
Unable to extend lob segment SAPSR4DB
Hi All,
I am getting the error u201Cunable to extend lob segment SAPSR4DBu201D when i try to import any dependency into my SC or during the Assembly of my SCA. Then we go and increase the space of the table, it starts working.
I would like to know how to resolve this problem and if there is any setting to be made so that the contents of this table are cleared automatically after being used?
Regards,
Poojith MVHi,
Have you cheked SAP / BRTOOLS for a tablespace overflow ?
Mark -
Critical_Segment LOB segment
I am receiving this error: CRITICAL_SEGMENT, object: (LOB segment) SAPR3.REPOLOAD.SYS_LOB0000130701C00013$$, value: 1659040 KB * 2 / PSAPEL620D (> 2349048/680920/445376/168160/74600 KB)
Can someone help me figure out what this is trying to tell me?This condition checks whether there are tables or indexes that can cause
an overflow of the tablespace with the allocation of up to 5
Next-Extents. As a default, all tables and indexes are checked against
the same threshold value. However, you can define different threshold
values for individual segments or tablespaces by specifying their names
in the OBJECT field of the DBCHECKORA table (transaction DB17). -
SPOOL_INTERNAL_ERROR spool overflow when submitting the same program
I am submitting the same program via job with different seletion screen values after JOB_OPEN, and then SUBMIT statement and JOB_CLOSE FM. But this job get cancelled with message "ABAP/4 processor: SPOOL_INTERNAL_ERROR" . The submit is as follows:
SUBMIT (sy-repid) USER sy-uname
VIA JOB 'ZTP_SAl_REG_MONITOR_JOBS'
NUMBER l_jobcount
TO SAP-SPOOL
SPOOL PARAMETERS fp_user_print_params
NEW LIST IDENTIFICATION 'X'
WITHOUT SPOOL DYNPRO
WITH rb_monit EQ 'X'
WITH s_jobcnt IN s_jobcnt
WITH p_date EQ p_date
WITH rb_row EQ rb_row
WITH rb_col EQ rb_col
AND RETURN.
Is it possible to use the same program to be scheduled....Let me include that the submit is happening with rb_monit = X and it has separate branch...so infinite looping can not happen.Hi Sumit,
I hope that the flag is ensuring that it doesnt go into infinite loop. You may wish to check that once bcz Spool overflow seems to be bcz of infinite loop or bcz of layout issue.
Goto SP01 in the same client where you have scheduled the job.
Check the spool no. which was generated bcz of the job.
Double click on the STATUS of the spool ( it should be in red background color).
System will give a popup with status details.
Again double click on the status. System will again give a popup.
The popup will give the details of why the spool ran into errors.
Also check the layout.
Thanks,
Best regards,
Prashant -
Error while crawling LOB contents SharePoint 2013
Error while crawling LOB contents SharePoint 2013
I have Configured the BDC Service application using SQL external content. The connection was successful and I am able to see the external content in the List "BDC Demo" . But when I search in the BDC Demo site it gives nothing.
So I checked in the crawl logs and identified that it shows " 1 " under error. to further drill down the issue , I went to click on "1" and see the error message : Error while crawling LOB contents SharePoint 2013 .
I have created an external DB named BCSDemo_DB for which I have granted my search Service account read& write permission.
I have added the same account under administrators for both secure store and BCS service applications.
I have done index reset , done a full crawl but the error still occurs.
Can someone please advise if I am missing something.
RegardsHi Aravinda,
According to your description, my understanding is that you got an error when you crawled SQL database table in SharePoint 2013.
This error is caused by the fact that the default content access account does not have any rights to access the metadata store in the Business Data Connectivity Service Application.
Or it is caused by the default content access account has no rights on the SQL database.
For fixing it, you need to grant the default content access account permission on metadata store in the Business Data Connectivity Service Application and the SQL database. You can refer to the link below:
http://www.sharepointinspiration.com/Lists/Posts/Post.aspx?ID=5
After that, do a full crawl for the content source.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
Overflow in the operation:= error
Hi,
I get the following error in my DTP of a process chain:
Runtime error while executing rule -> see long text
Diagnosis
An error occurred while executing the transformation rule:
The actual error message:
Overflow in the operation :=
The error was triggered at the following program location:
System Response
Processing of this data record was cancelled
This issue seems to be because of the length of the target field being lesser than the source field.
Can you please let me know how this issue can be resolved since the DTP is added in a process chain?
Thanks in advance.Hi,
As long as without knowing exact infoobject not easy to suggest direct solution.
Assuming as your loading data from PSA to Cube.
Go to your transformations, Menu Extras--> tabular overview, compare each source and target object length, need to be the same.
if any target object length is lesser than source field , that length need to increased.
Thanks -
RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ''
Hi,
While executing the below code i am getting the error
" RUNTIME ERROR IN GENERATED PROGRAM. Overflow converting ' ' am new to ABAP , can anyone kindly help me where i have went wrong ? .
IF ( V_DO_CDS_NAME_MAIN <> '' ).
ABAP.
DATA: ref_it_tab TYPE REF TO data,
ref_wa TYPE REF TO data.
FIELD-SYMBOLS: <fs_itab> TYPE ANY TABLE.
FIELD-SYMBOLS: <fs_wa> TYPE ANY.
FIELD-SYMBOLS: <fs_field> TYPE ANY.
CREATE DATA ref_it_tab TYPE STANDARD TABLE OF (V_DO_CDS_NAME_MAIN) WITH NON-UNIQUE DEFAULT KEY.
ASSIGN ref_it_tab->* TO <fs_itab>.
SELECT * FROM (V_DO_CDS_NAME_MAIN) INTO TABLE <fs_itab> where C1 = V_WORK_ITEM_ID_MAIN.
CREATE DATA ref_wa LIKE LINE OF <fs_itab>.
ASSIGN ref_wa->* TO <fs_wa>.
loop at <fs_itab> assigning <fs_wa>.
assign component 'CLIENT' of structure <fs_wa> to <fs_field>.
V_CLIENT = <fs_field>.
assign component 'C0' of structure <fs_wa> to <fs_field>.
V_C0 = <fs_field>.
assign component 'C1' of structure <fs_wa> to <fs_field>.
V_C1 = <fs_field>.
assign component 'C2' of structure <fs_wa> to <fs_field>.
V_C2 = <fs_field>.
assign component 'C3' of structure <fs_wa> to <fs_field>.
V_C3 = <fs_field>.
assign component 'C4' of structure <fs_wa> to <fs_field>.
V_C4 = <fs_field>.
assign component 'C5' of structure <fs_wa> to <fs_field>.
V_C5 = <fs_field>.
assign component 'C6' of structure <fs_wa> to <fs_field>.
V_C6 = <fs_field>.
assign component 'C7' of structure <fs_wa> to <fs_field>.
V_C7 = <fs_field>.
assign component 'C8' of structure <fs_wa> to <fs_field>.
V_C8 = <fs_field>.
assign component 'MESSAGE_ID' of structure <fs_wa> to <fs_field>.
V_MESSAGE_ID = <fs_field>.
assign component 'TIMESTAMP' of structure <fs_wa> to <fs_field>.
V_TIMESTAMP = <fs_field>.
assign component 'EXTRACTKEY' of structure <fs_wa> to <fs_field>.
V_EXTRACTKEY = <fs_field>.
assign component 'STATEID' of structure <fs_wa> to <fs_field>.
V_STATEID = <fs_field>.
assign component 'DEVICE_ID' of structure <fs_wa> to <fs_field>.
V_DEVICE_ID = <fs_field>.
ENDLOOP.
ENDABAP.
ENDIF.Hi Mubeen,
While Copying the cotes have come closer otherwise its working fine , i was able to find the error .
There are ten predefined ABAP data types. There are 100 possible type combinations between these elementary data types. ABAP supports automatic type conversion and length adjustment for all of them except type D (date) and type T (time) fields which cannot be converted into each other.
I commented the TimeStamp part where i had given the ABAP Type as D and it started working .
But now i want to display the content of "TimeStamp" field but i am not able to do so .
This is the format in which it has to be displayed 2009.011.915.3353.
Which ABAPTYPE i need to use ?.
i am able to display in this format 20090119153353
regards
Harsha -
Hi,
could you do me help?
i can not insert a string into a oracle clob field, it echo as:
ORA22920 row containing the lob value is not locked. ORA 06512 at "SYS.DBMS_LOB" line 708
ORA 06512 at line 1;
what its means? please.
my table defined as : create table clob1(id number(5),mclob clob default empty_clob()); the id is create by a sequece of test_sequence automaticly.
my code as belows:
import java.io.*;
import java.sql.*;
//import oracle.sql.*;
public class test4 {
public static void main(String args[]) {
String url_String
= "jdbc:oracle:thin:test/test@myhost:1521:myorcl";
try {
Class.forName
("oracle.jdbc.driver.OracleDriver");
java.sql.Connection con =
java.sql.DriverManager.getConnection(url_String);
con.setAutoCommit(true);
Statement stmt
=con.createStatement();
String sqlStr ="insert into
clob1 (mclob) " + "values(empty_clob())";
stmt.executeUpdate(sqlStr);
String query = "select
test_seq.CURRVAL from dual";
ResultSet rs =stmt.executeQuery
(query);
rs.next();
int currval =rs.getInt(1);
query = "select * from clob1 where
id="+currval;
String str
="abcedefhijklmnopqrstuvwxyz";
rs =stmt.executeQuery(query);
rs.next();
java.sql.Clob clob1
=rs.getClob(2);
oracle.sql.CLOB clob=
(oracle.sql.CLOB)clob1;
System.out.print(clob);
java.io.Writer
wr=clob.getCharacterOutputStream();
wr.write(str);
wr.flush();
wr.close();
stmt.close();
con.close();
} catch(Exception ex) {
System.err.println("SQLException: "
+ ex.getMessage());
nullHi,
To avoid ORA-22920 error while selecting lob column, use the 'for update' clause in the select statement like :
query = "select * from clob1 where id="+currval+" FOR UPDATE" ;
This should solve the problem. However, after fixing this, you might get the error :
java.sql.SQLException: ORA-1002: fetch out of sequence
I got this error when testing your code. To avoid this error, before executing 'select ... for update' statement Set AutoCommit to OFF, like :
query = "select * from clob1 where id="+currval+" FOR UPDATE" ;
con.setAutoCommit(false);
rs =stmt.executeQuery(query);
Hope that Helps,
Srinivas -
SAP paging overflow when storing data in the ABAP/4 memory.
I am trying to create a data source in BI7.0 in the Datawarehousing Workbench. But along the process when i need to select a view i get an error detailed in the following error file extract: Please go through and assist.
untime Errors MEMORY_NO_MORE_PAGING
Date and Time 06.06.2009 14:21:35
Short text
SAP paging overflow when storing data in the ABAP/4 memory.
What happened?
The current program requested storage space from the SAP paging area,
but this request could not be fulfilled.
of this area in the SAP system profile.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The ABAP/4 runtime system and the ABAP/4 compiler use a common
interface to store different types of data in different parts of
the SAP paging area. This data includes the
ABAP/4 memory (EXPORT TO MEMORY), the SUBMIT REPORT parameters,
CALL DIALOG and CALL TRANSACTION USING, as well as internally defined
macros (specified with DEFINE).
To store further data in the SAP paging area, you attempted to
allocate a new SAP paging block, but no more blocks were
available.
When the SAP paging overflow occurred, the ABAP/4 memory contained
entries for 20 of different IDs.
Please note:
To facilitate error handling, the ABAP/4 memory was
deleted.
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 8176
Extended memory (EM)........... 13587912
Assigned memory (HEAP)......... 0
Short area..................... " "
Paging area.................... 40960
Maximum address space.......... " "
By calling Transaction SM04 and choosing 'Goto' -> 'Block list',
you can display an overview of the current roll and paging memory
levels resulting from active users and their transactions. Try to
decide from this whether another program requires a lot of memory
space (perhaps too much).
The system log contains more detailed information about the
termination. Check for any unwanted recursion.
Determine whether the error also occurs with small volumes of
data. Check the profile (parameter "rdisp/PG_MAXFS", see
Installation Guidelines).
Is the disk or the file system that contains the paging file
full to the extent that it cannot be increased, although it has
not yet reached the size defined in the profile? Is the
operating system configured to accommodate files of such a
size?
The ABAP processor stores different types of data in the SAP
paging area. These include:
(1) Data clusters (EXPORT ... TO MEMORY ...)
(2) Parameters for calling programs (SUBMIT REPORT ...),
Dialog modules (CALL DIALOG ...) and transactions
(CALL TRANSACTION USING ...)
(3) Internally defined program macros (DEFINE ...)
Accordingly, you should check the relevant statements in a program
that results in an overflow of the SAP paging area.
It is critical when many internal tables, possibly with
different IDs, are written to memory (EXPORT).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MEMORY_NO_MORE_PAGING" " "
"SAPLWDTM" or "LWDTMU20"
"TABC_ACTIVATE_AND_UPDATE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.Hi Huggins,
Maintenance of the Paging File is owned by your basis team.
They should increase this in order for your transaction to process successfully.
Just for your reference, in case the OS used is windows server 2003, paging file value can be checked through;
Right click in the My Computer>properties.
Then go to Advance tab;
Then there should be a performance section, click the settings
Then Advance tab again. The paging file can be seen from there.
(and can be adjusted from there also)
The value of the paging file in general will be dependent with the available RAM from the hardware.
Hope this helps. Thanks a lot.
- Jeff -
Cannot Send Email from Crystal Reports Viewer; MAPI:Overflow
I am trying to send a report via email with crystal reports, but i get the following error message:
"The following unexpected error occured while trying to send the report to MAPI: Overflow."
I am using Outlook 2010, Win 7 x64 bit.
Does anyone have any ideas or thoughts?Yes, it is a 3rd party app that opens Crystal Reports Viewer. Attached are the screen shots I get when try to send the report as an email.
-Dan -
Hi,
I am having a SQL loader mapping where in I am loading data from a CSV file to Oracle target table.
My target table is having a CLOB column. Now, due to this a LOB index has also been created for this column.
My CSV is having 1 million records and when I execute the mapping it gets hang and doesnot load anything.
I think that due to that LOB index the execution is taking so long. Is there any way that I can disable this index during run-time. I tried but it gave me error: ORA-22864: cannot ALTER or DROP LOB indexes.
Can anyone of you suggest any alternate to this.
Thanks!!!!Hey Fren,
We have Secondary index to shorten the search time and thus to increase the proficiency in selecting the accurate records from numerous fields available for the option...
That means, we can say that Secondary Index can act as an Extension to the Primary Key fields available to Shorten the Search time.....
But if you use 'OR' condition and give a SELECT Query in your report it will act as the reverse effect of Secondary index......
Instead you can create the Secondary Index including the key fields with some extension to the same...
Means For example,
Table 1:
Field1 [x] CHAR 10
Field2 [x] CHAR 10
Field3 [ ] NUMC 10
Field4 [ ] CHAR 10
Field5 [ ] CHAR 10
Field6 [ ] NUMC 10
Field7 [ ] CHAR 10
Field8 [ ] CHAR 10
Field9 [ ] NUMC 10
Field10 [ ] CHAR 10
Field11 [ ] CHAR 10
Field12 [ ] NUMC 10
Field13 [ ] CHAR 10
Field14 [ ] CHAR 10
Field15 [ ] NUMC 10
Field16 [ ] CHAR 10
Field17 [ ] CHAR 10
Field18 [ ] NUMC 10
Field19 [ ] CHAR 10
Field20 [ ] CHAR 10
Field21 [ ] NUMC 10
Field22 [ ] CHAR 10
Field23 [ ] CHAR 10
Field24 [ ] NUMC 10
So you can have Field 3 Field4 Field5 Field6 as your secondary index.....
Thats it,
Thank you,
Inspire If Needful,
Warm Regards,
Abhi -
Importing multiple jpeg files from local folder into database LOB column
I have to programatically save multiple pictures (jpeg) from the folder on my PC into Oracle table LOB column. I have to be able to choose local folder on my PC where are the pictures, and press button on Oracle Forms to save pictures in LOB column in database.
I'm using Forms 6i and Oracle 10g Rel2 database.
Is this possible with Oracle Forms or the only way to do that is to use create directory database command and use dbms_lob package which I shouldn't do, because Oracle database directory is not allowed to see my local folder.As I said I don't know how to use object data type, I just given a shot as below. I know the following code has errors can you please correct it for me.
Public
Sub Main()
' Add your code here
Dim f1
As FileStream
Dim s1
As StreamReader
Dim date1
As
Object
Dim rline
As
String
Dim Filelist(1)
As
String
Dim FileName
As
String
Dim i
As
Integer
i = 1
date1 =
Filelist(0) =
"XYZ"
Filelist(1) =
"123"
For
Each FileName
In Filelist
f1 = File.OpenRead(FileName)
s1 = File.OpenText(FileName)
rline = s1.ReadLine
While
Not rline
Is
Nothing
If Left(rline, 4) =
"DATE"
Then
date1 (i)= Mid(rline, 7, 8)
i = i + 1
Exit
While
End
If
rline = s1.ReadLine
End
While
Next
Dts.Variables(
"date").Value = date1(1)
Dts.Variables(
"date1").Value = date1(2)
Dts.TaskResult = ScriptResults.Success
End
Sub -
Sharepoint 2013 vs Exchange 2010 SP3 search (Error while crawling LOB contents)
Hi there:
We are trying to solve the problem: ERROR CRAWLING LOB CONTENTS when we wish to search Exchange 2010 SP3 public folder content on Sharepoint 2013 Foundation.
Quick briefing:
Followed this instructions:
http://technet.microsoft.com/en-us/library/jj591608(v=office.15).aspx
* Created CRAWL RULE
- Used Domain Admin for content access ---> IS THIS WRONG?
- Domain Admin can access public folder thru Outlook Web Access (checked)
- Included all items in this path
PRINTSCREEN 1
* Added a content source for Exchange Server public folders
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 1st subfolder in new window and copied the address
- Logged to Outlook Web Access with domain admin, expanded Public folders and opened 2nd subfolder in new window and copied the address
PRINTSCREEN2
* Did a FULL CRAWL
PROBLEM:
- Search results does not throw "correct data". Some items are not being found
CRAWL LOG is reporting: Error while crawling LOB contents
Detailed error message:
https://mail.domain.com/OWA/?ae=Folder&id=PSF.LgAAAAAaRHOQqmYRzZvIAKoAL8RaAwAnt2ed15IATLg8XoXLNj4EAAAAXsN8AAAB&t=IPF.Note
Error while crawling LOB contents.
Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException
The shim execution failed unexpectedly - Exception has been thrown by the target of an invocation..:
System.InvalidOperationException An internal server error occurred.
Try again later.; SearchID = 4E8542D3-48EF-404E-8025-8D9AAEFE777A )
We thought it's a throttling issue / found possible solution:
http://powersearching.wordpress.com/2013/07/23/exchange-public-folders-search-fail-error-while-crawling-lob-contents/
Tried it, still same Error messages, problem not resolved.
Any hints? Please advise.
With best regards
bostjancHi Bostjan,
From the error message, the issue might be caused by throttling policy on Exchange side. And the article you posted provides the right solution, some modification to the solution and please try again.
For throttling policy part
1.Execute the command for Set-ThrottlingPolicy
Set-ThrottlingPolicy SharePoint -RCAMaxConcurrency Unlimited -EWSMaxConcurrency Unlimited -EWSMaxSubscriptions Unlimited -CPAMaxConcurrency Unlimited -EwsCutoffBalance Unlimited -EwsMaxBurst Unlimited -EwsRechargeRate Unlimited
2.Execute the command Get-ThrottlingPolicy SharePoint to double confirm the policy setting has been successfully executed
For registry key part
1. Start Registry Editor (regedit).
2. Navigate to the following registry subkey:
\\HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
3. Right-click ParametersSystem, point to New, and then click Key.
A new key is created in the console tree.
4. Rename the key MaxObjsPerMapiSession, and then press Enter.
5. Right-click MaxObjsPerMapiSession, point to New, and then click DWORD (32-bit) Value.
The new value is created in the result pane.
6. Rename the key to <Object_type>, where <Object_type> is the name of the registry object type that you're modifying. For example, to modify the number of messages that can be opened, use objtMessage. Press Enter.
7. Right-click the newly created key, and then click Modify.
8. In the Value data box, type the number of objects that you want to limit this entry to, and then click OK. For example, type 350 to increase the value for the object.
9. Restart the Microsoft Exchange Information Store service.
If it still doesn’t help, please check ULS log for related error message.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Short Dump : Page Overflow
Hi All,
When i am executing a report on Production, i am getting short dump - "Page overflow".
It's very urgent.
Early response will be highly appreciated.
Best regards,Can you provide more details?
From what it looks like, i think your basis should increase the memory allocations for your internal tables.
Regards,
Ravi
Maybe you are looking for
-
Re: MSI 785GM-E51 and memory modules problems -l- Split
I am using AMD PHENOM II 1055 125w CPU on MSI 785GM-E51. Memory Corsair XMS3 DDR3-1600 x4 I can put memory in slot 1 and 3 it will boot fine. If I install DDR3 in slot 1 and 2 the system will not boot. If I full populate all the memory slots it will
-
I open the browser then goes to my main page wich I have it as Googgle. Immediatelly jumps to a next tab and trys to open users.skynet.be/mgueury/mozilla/no_tidy_lib.html from there it continues looping and freezes. I close thaty tab and can not get
-
Physical check of asset to see PO number
Dear experts, Can we generate a report in SAP to trace from Fixed asset to the PO number for physical check? Many Thanks, Felix Ang
-
Error Active Directory Target Reconciliation
Hi, I am trying to run target reconciliation for AD. I reconciled 8000 users successfully, but I have 22 users with errors. I want to know if the problem is with the AD user attributes or with the OIM. I'm getting the following exception: INFO,15 Apr
-
Time Capsule does not save files
I recently tried to make a backup with the new MacBook I have but I always get the same answer from the Time Capsule System that there the backup is too large for the backup volume and that Time Machine requires more backup volume. Now, I dont know h