Local copy of file during Display

Hi,
I have mainitained C:\temp\ as the path for the frontend in DC20. Whenever the file is displayed in CV03N I have noticed that the file does get copied to this location but there is one more copy of the file created in local temp directory (C:\DOCUME1\user\LOCALS1\Temp) with some name as "~SAP{50D31B32-9545-4728-8206-B631EEBD27DC}.docx".
I noticed this since I have field parameters set in the word file which fetches the filename as one of the parameter value. This value is replaced with the value as "~SAP{50D31B32-9545-4728-8206-B631EEBD27DC}.docx" whenever some one prints the document from cv03n. This is causing a problem.
i don't understand why multiple copies are created and display is done form a different file.
Any solution would be appreciated.
Regards
Aayni

Hi Pradeep,
I have a problem in ME52N transaction related to Services for object.
Services For Object->Create->Store Business Document->Archive form Frontend
Here I am facing the performance problem when I try to drag&drop the PDF type file it is taking longer time.
Can you provide some inputs for this issue.
Regards,
Ramesh

Similar Messages

ITunes stops at "copying new files" during installation?

Well, my laptop is new and I wanted to install iTunes. I downloaded it directly from the official Apple website, but whenver I try to install it, it stops at "copying new files". The whole laptop stops functioning and I have to shut it down via the power button. I tried installing iTunes at least 3 times and it ended in the same result. I was afraid that shutting down my laptop that way anymore would harm my laptop, so I decided to get some help.

Any help? I need an answer to this as soon as possible.

How to read local large JPEG files and display into Images Tile

Hi all,
I can read the local multiple files by FLEX/AIR FileListEvent
and loader to read the large JPEG files but cannot display them
into a TileList. Since it is a number of images files, how can I
put them into a thumbnail TileList.
Please kindly advise.
Regards,
Billy

1. So I would like to know which is the {color:#3366ff}best way to load local images in ImageView{color}.I'm no expert, but is there a reason that you are using Swing to do the loading?
2. secondly, currently the system displays all images only after the completion of creating all images. {color:#3366ff}How to display images as and when they are created.{color} So that the user has a feeling that the images are loading.JavaFX Image class let you display a lightweight placeholder, and you can bind the progress to some kind of visual indicator. I don't think you can display an image that is partially loaded.
def PATHS: String[] = [
    "C://Ariel Atom//ariel-atom-1.jpg",
    "C://Ariel Atom//ariel-atom-2.jpg",
    "C://Ariel Atom//ariel-atom-3.jpg",
    "C://Ariel Atom//ariel-atom-5.jpg"
function getImage(path: String): Image {
    Image {
        url: "file:///{path}"
        backgroundLoading: true
Stage {
    title: "Image Tiles"
    width: 1024
    height: 800
    scene: Scene {
        content: [
            Tile {
                columns: 2
                tileWidth: 400
                tileHeight: 400
                content: for (i in [0..3]) {
                    ImageView {
                        image: getImage(PATHS)

Problems to avoiding local copy in the user's machine

Hi All,
I implemented the BadI DOCUMENT_FILES01~AFTER_START_APPL according to the wiki http://wiki.sdn.sap.com/wiki/display/PLM/Avoidinglocalcopyoforiginal for avoid local copy of original in the user's machine.
This implementation only works for originals open through the ECL Viewer or MS Office Integration, avoiding local copy of originals in this cases.
But the problem is that PDF files still being copy to temporary folder in the user's machine when I use ECL Viewer 6.0 with patch 5 implemented according to SAP note 1380587.
If I implement the patch 5 for ECL Viewer 6.0 without the manually customizing in "Enviroment Variables" indicating in the solution section of the SAP note, then the PDF files are not copy to temporary folder in the user's machine.
In test with ECL Viewer 5.1.2 and 5.1.3, this problem with PDF Files doesn't happen too.
My system and customizing information:
SAP GUI 710 PATCH 18
ECL 6.0 with all patches installed 1 to 7 according to the SAP notes
Data carrier
- Define mount points/logical drive => Data Carrier: PC; Data Carrier Type: PC; Prefix for access path: PC
- Define data carrier type "server, front end" => Data Carrier Type: PC; Description: local PC; path: c:\temp\
Has anyone experienced this?
Best Regards,
Daniel

Hi Daniel,
regarding the display or handling of PDF files I have to say that here the local copy is required by the Adobe Reader and therefore the system has to made a local copy to display the PDF files correctly. This happens also if you display PDF files with the ECL Viewer because also the viewer requires an instance of the Adobe Reader which again needs a local copy. So for displaying PDF files a local copy is mandatory.
Best regards,
Christoph

Copy a file from local drive to network drive!

The subject says it all but I'll explain. I have a web application that runs on a tomcat and mysql. I have a bunch of clients in a local network that uses the application.
Server is running Windows 2003 server and clients are running windows XP.
On a client request a file is created on the server in "temp" folder. The file name is "justAFile.txt".
On the client pc a folder "temp" is shared for reading/writing.
What I want is the server to take the IP address of the client, and then based on that address to copy the file "justAFile.txt" to it (for example "\\192.168.0.20\temp\" - that is the client address).
I have the address of the client:
String userAddress = request.getRemoteAddr();I use this code:
FileOutputStream outFile;
PrintStream p;
String bonFileName = (justAFile.txt");
String destinationFileWithPath = ("\\\\192.168.0.20\temp\\skladPrint\\"+bonFileName);
try {
    outFile = new FileOutputStream(destinationFileWithPath);
    p = new PrintStream( outFile );
    p.println ("a textto be written on a file");
    p.close();
} catch (Exception e) {
     %>Error writing to file<br><%
}This code can create a file on a local drive with no problems, but when I try on a network drive it fails. Even for testing purposes I set the shared folder to a maped drive "Z:", and again no luck.
I've spend all my day till now in reading articles in inet, but haven't found one that will solve the problem.
I also tried creating a batch file (exec.bat) that has in it:
move \temp\*.txt \\192.168.0.20\temp
and then executing it with:
String[] executeCommand1 = { "cmd.exe", "/c", "\\temp\\exec.bat" };
Process p1 = Runtime.getRuntime().exec(executeCommand1);
p1.waitFor();But again no luck. When I execute the file from command prompt, it moves the file to the shared folder, but when I start it from the java application with the posted code, it DOES NOT move the file...
Any help will be appreciated...

Try using the jCIFS project. This package allows you to access shared folders on a PC if you have a good username/password.

Need to copy .txt file from FTP server and downloaded on local server directory.

I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.

Below links will help achieving it:
https://www.virtualobjectives.com.au/sqlserver/ftp_scripts.htm
http://www.mssqltips.com/sqlservertip/2884/sql-server-integration-services-ssis-ftp-task-for-data-exchange/

Copy a file from URL to local HDD

Hi,
I've got 2 problems:
1. I'm an absolute beginner and an german-speaking user of this forum
2. I want to copy a file from within a signed applet (with full access permissions) from a URL on the server to a local directory on the client. It works with .txt or .ini files, but not with .dll or .exe. The .exe file has only 1KB instead of the 5MB and contains only something like "-1". Help!!
Here's what i made:
URL updateurl = new URL(getCodeBase() + "testfile.exe");
InputStream in = updateurl.openStream();
FileOutputStream out = new FileOutputStream("C:\\temp\\testfile.exe");
byte[] buf = new byte[4096];
int len;
while ((len = in.read(buf)) > 0)
out.write(buf, 0, len);
out.close();
in.close();
Thanks for any help!
cmon42

From looking at the code I can't see any blatant errors.
The only thing I can think of, is: is your code wrapped by a try/catch block which you are ignoring?
The reason I ask, is that maybe you are not downloading the file you intended in the first place. The reason I think this is because of the line:
URL updateurl = new URL(getCodeBase() + "testfile.exe");Shoudn't there be a separator between getCodeBase() and testfile.exe? Only a guess, since getCodeBase may already return the separator.
HTH,
Manuel Amago.

Problems during copying music files from iTunes 10.6.1 to iPhone

1st problem
In new iTunes 10.6.1 on my MBP when copying music on iPhone if during copying add additional musical files in queue, copying of files from the previous queue stops. In the previous iTunes version of such problem didn't arise. Whether there is a solution of this problem?
2nd problem
In older version of iTunes i could adding new music files to my iphone with drag and drop from Finder. Now i must add files in iTunes library and then from library drag and drop files to iphone. How to solve this problem?

You would have to purchase 10.6 (Snow Leopard) and install it, assuming your computer is compatible.

How to copy a file from application server to local system

Guys,
Need to copy a file from application server to local system.Is there an FM for the same.
Tried searching for it but couldn't find anything useful.
Code snippets will be highly appreciated.
Warm Regards,
P.
Moderator message: very frequently asked and answered question, obviously you did not search thoroughly, all points removed.
Edited by: Thomas Zloch on Dec 3, 2010 4:48 PM

hi,
You can use the transactions CG3Y or through program u can do like this..
DATA: BEGIN OF IT_FILE OCCURS 0,
                LINE TYPE STRING,
           END OF IT_FILE.
OPEN DATASET <file_name> FOR INPUT IN TEXT MODE ENCODING DEFAULT.
        IF SY-SUBRC IS INITIAL.
          DO.
            READ DATASET<file_name> INTO IT_FILE-LINE.
            IF SY-SUBRC = 0.
              APPEND IT_FILE.
              CLEAR IT_FILE.
            ELSE.
              EXIT.
            ENDIF.
          ENDDO.
        ENDIF.
CLOSE DATASET <file_name>.
Download it to local system using FM - GUI_DOWNLOAD

USB Drive Resets during file copy, interrupting file operations

Fresh Arch Linux install, working USB thumb drive (Windows, previous Arch Linux setups, etc.), formatted FAT32.
Seems to randomly reset, eject, and auto-re-mount during extensive file operations (i.e. copying 4gb worth of 800 files from the USB thumb drive to disk).
I've tried various USB ports to no avail; no external hub being used.
Thoughts? Not sure where to begin diagnosing:
dmesg:
usb 1-1: configuration #1 chosen from 1 choice
scsi17 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 15
usb-storage: waiting for device to settle before scanning
scsi 17:0:0:0: Direct-Access OCZ RALLY2 1100 PQ: 0 ANSI: 0 CCS
sd 17:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 17:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 17:0:0:0: [sdb] Write Protect is off
sd 17:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 17:0:0:0: [sdb] Assuming drive cache: write through
sd 17:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 17:0:0:0: [sdb] Assuming drive cache: write through
sd 17:0:0:0: [sdb] Attached SCSI removable disk
usb 1-1: reset high speed USB device using ehci_hcd and address 15
sd 17:0:0:0: [sdb] Unhandled error code
sd 17:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdb, sector 7589504
sd 17:0:0:0: [sdb] Unhandled error code
sd 17:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdb, sector 7589744
sd 17:0:0:0: [sdb] Unhandled error code
sd 17:0:0:0: [sdb] Result: hostbyte=0x07 driverbyte=0x00
end_request: I/O error, dev sdb, sector 7589776
usb 1-1: USB disconnect, address 15
FAT: bread failed in fat_clusters_flush
FAT: FAT read failed (blocknr 3805)
FAT: Directory bread(block 24147944) failed
FAT: FAT read failed (blocknr 3818)
<snip lots of repeats>
FAT: FAT read failed (blocknr 4032)
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
usb 1-1: new high speed USB device using ehci_hcd and address 16
usb 1-1: configuration #1 chosen from 1 choice
scsi18 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 16
usb-storage: waiting for device to settle before scanning
scsi 18:0:0:0: Direct-Access OCZ RALLY2 1100 PQ: 0 ANSI: 0 CCS
sd 18:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
sd 18:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 18:0:0:0: [sdb] Write Protect is off
sd 18:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 18:0:0:0: [sdb] Assuming drive cache: write through
sd 18:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 18:0:0:0: [sdb] Assuming drive cache: write through
sd 18:0:0:0: [sdb] Attached SCSI removable disk
lsusb -v for the drive:
Bus 001 Device 016: ID 0325:ac02 OCZ Technology Inc ATV Turbo / Rally2 Dual Channel USB 2.0 Flash Drive
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0325 OCZ Technology Inc
idProduct 0xac02 ATV Turbo / Rally2 Dual Channel USB 2.0 Flash Drive
bcdDevice 11.00
iManufacturer 1 OCZ Technology
iProduct 2 RALLY2
iSerial 3 AA04012700275633
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 300mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 255
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 255
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Last edited by lieut_data (2009-12-26 17:39:56)

Jithin wrote:
When ever I copy some files or create a file in my external USB drive which is a FAT32 one. file permissions are not preserved.
From <http://support.apple.com/kb/HT3764>:
"The MS-DOS (FAT32) file system format does not support permissions, file owners, and groups. Such permissions are synthesized on Mac OS X with some default permissions. Because of this all files will have the same permissions […]"
So it's not "how it work in mac", but it's a limitation of the FAT32 file system.

How to backup/restore files stored in the local copy of my iDisk using time

I have a MobileMe account and thus I am using the iDisk. I configured it to have a local copy. Thus I imagine that Time Machine is making an hourly backup of it.
However, when I enter Time Machine to restore a file, I cannot open my iDisk (it goes to the current version, not the historical ones).
This is particularly worrying for me, as all my important files (except images, movies and music)are stored on my iDisk such that I can access them from my multiple computers.

From this PCWorld article:
[Back up IDisk With Time Machine|http://www.pcworld.com/businesscenter/article/190738/backup_idisk_with_timemachine.html]
This local copy is stored as a sparse image bundle, which you can find on your Snow Leopard Mac by moving to your user folder and then following this path: Library/FileSync/incomprehensibly-named-folder where incomprehensibly-named-folder bears a name made up of letters and numbers. Inside this folder is the file you're after--yourmobilemename_iDisk.sparsebundle.
Unless you've configured Time Machine to exclude your user folder and its contents, this is where you'll point Time Machine to look for a backup. Note that when you travel back in time and restore this file, you'll be warned that there already exists a file with that name and offered a choice to keep the original, keep both, or replace the original. I'd suggest keeping both. Here's why.
I'm going to assume that people would want access to their old iDisk because they've lost something from it between then and now. If you keep the original, you can't get to your old stuff. If you replace the current sparse image bundle with the old one, your iDisk and Mac are now out of sync and you won't have the files you added since the restore point until they're synced again. If you keep both, you have everything you need.
Move the restored file to your Desktop, double-click it to mount it, and grab the content you want. Leave the original where it was, remove the (original) that now appears in its name, and your Mac and iDisk can go back to syncing where they last left off.
------------------------------

Local copy of Network User files

With the latest OS X Server, I see how you can use a Network User account to log onto the server or any "bound" client machine on the home network. However, when leaving home with a "client" machine (e.g. MacAir with Mountain Lion), is their someway to have a local copy of the Network User files on the client? Hopefully you can see the objective of this question: while at home, use any machine to work with the files, but when you leave the network, how can you have a synchronized copy of the files on a Mac laptop? If needed I can dedicate a client machine for each user, so maybe there's a way to designate the files of a Network User on another, non-server, client machine like a Mac laptop?

I have the same question, cause I do not have more space on iCloud for more backups, and I really want to save an older backup from my iPhone, that speceific backup was the last one before my iPhone was stoled. if anyone know if it is posible to locate that file on "iCloud" and save it, I use iCloud instead of iTunes, and I do not know where to look for it...
thanks

Handle LOCAL files during a web session

I'm developing an application with Forms 6i.
Please consider the following command line:
text_io.fopen('c:\tmp.txt','r')
In client/server mode the file "tmp.txt" is searched on the local computer (on
the client).
In web mode the file "tmp.txt" is searched on the server.
How can I open the "tmp.txt" file on the CLIENT computer, also in web mode?
Is there a way to handle local files during a web session?
Thank you in advance!

There is a java upload bean available on OTN (somewhere in the javabean/pjc section of examplecode) ... this one lets you do what you want, but it's violating the java sandbox functionality and hence need to be certified/signed to use in a browser - which i personally think is somehwat a hassle ... also it just copies the file to the middletier - you still will need to then read it from there.
i've found that using the webdb/portal approach for file handling is much easier. if you alerady run on web then you probably anyway have installed 9ias or a webdb/portal server somewhere ... using web.show_document builtin and a very small webdb procedure (something like 10 lines of code) will allow you to easily upload a file directly into the database into an blob!
have a search through this forum ... i posted a working example a few days back (somewhen last week) on this forum!
Cheers,
Stefan

Photo library gone during copying the file...

I bought a new Mac and wanted to import the library into my new computer. So I started to copy the file onto my external hard drive wth the idea to connect that drive to my new computer and use if from there to imported into my new iPhoto 11.
However, the copying was going to take 256 hours accoring to my G5 because the file was 25 GB big, so I cannceled it to try something else. After canceling, the copied file showed a size of 500 mb and the original file was gone! I checked everywhere, but it seems that I lost my comlete iphoto library. This is rerrible, how can a file dissapear only because I canncels a copy, (not a cut and past).
Does someone has suggestions?
André

How did you go about trying to copy the library from the G5 to the EHD? Did you just click and drag it to the EHD?
Or did you use the Move method? That is hold down the Command+Shift key and drag the file from the G5 to the EHD. This method copies the file to the destination and delete it from the source when the copy is done. If you did use the move method and cancelled the "move" when you did it might have deleted the source file and left you with just the partial file on the EHD. The "move" feature was an issue a while back as I recall.

Missing Files During Network Copy?

I have recently copied data files (mostly pdf) from my windows machine to my iMac via my network when I got my new computer.
Tonight, I noticed some files that I viewed the other day on my Mac were mysteriously gone?
Being that, I verified that my old machine still had the original files that were supposedly missing. So, to ensure that I had all my files I zipped the original folder on my old computer and copied back to the Mac to a new directory. When I unzipped on the iMac, the files in question are missing again in the new directory.
What am I doing wrong? I am concerned because I have quite a bit of data that I switched over and I'm not really sure what might be missing.
Any ideas are appreciated.

It appears that if you try to copy directly from My Documents on the Mac, certain files are not copied.
Why some files are copied and other are not I have no clue but I simply logged into my windows machine and copied directly to my Mac and that seemed to work.

Local copy of file during Display

Similar Messages

Maybe you are looking for