Local domain, IIS Hosting and SMTP issues.

I have a local domain on Windows server 2012 with dns, dhcp, iis and smtp. (Yes, I am aware of the dangers of these combinations) it is for learning purposes only and not my main pc.
My local domain is willow.run and I am hosting a website, the domain for that is machinerylubricant.com I have IIS 8 installed (6.0 also for smtp)
My original issue was getting IIS to send an email to localhost through a php script for a contact form hosted on the website. I finally got to where it appears to be sending the contact form info to my drop folder but I ahve no idea how to get that .EML
file to actually forward to gmail account or even outlook on my computer/server.
In the email file (.eml in drop folder) it says "To: *******@gmail.com" as it is supposed to but that email is not making it to the specified gmail account. Also no error messages in the ph logs or the log files for smtp. How would I go about setting
up a email program to work on the lan with the acual www domain name I own?
I am learning everything at once basically, windows server, coding, protocols etc. Please bare with me.

Rather than answer your specific question, how about I give you the best way to achieve what you're looking for?
For inbound messages, you want to use the "aliasdetourhost" keyword. Check the documentation for how this is set up.
For outbound messages, you want to use the "alternate conversion channel"
When used together, this will achieve what you're looking for, without the looping that you have generated....
The alternate conversion channel was written up here:
http://ims.balius.com/resources/downloads/files/AlternateConversion.pdf

Similar Messages

POP and SMTP issues

I am wondering whether anyone might have a solution to this problem. I recently changed servers for my website which means I have to set up my personal account in Mac mail.
I have entered the POP details and password correctly and the same with SMTP. The connection doctor informed me they cannot connect and to check my user name and password. Looking at this posting below I unchecked authentication and, after that, it did connect to the SMTP. But, sadly "please check user name and password" is all I get for the POP.
I have doubled checked all the settings provided to me by my new server. I can access my servers Webmail and my mail is arriving in there. I have four other accounts set up in Mac Mail and no issues there.
Stan in Hartlepool.
Version 10.8.2
David Gimeno Gost
Feb 26, 2007 1:07 PM
Mail Help has some articles devoted to sending problems, e.g. “I can't send email” or “I can't send email because the connection to the server on port 25 timed out”. You may want to take a look at them in case there is something there that applies to you. Something that usually works if you’re trying to use an outgoing (SMTP) server different from the one provided by your ISP (and in the case of .Mac in particular) is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Mail Server > Server Settings. On the other hand, if the outgoing server that doesn’t work is the one provided by your ISP, the problem could be that you’re telling Mail to authenticate, but the outgoing server doesn’t actually require authentication because it can determine who you are by other means.

not knowing your hosting service or if your doing it yourself (your own servers)
see if this link can provide you some addtional information as to settings etc
http://support.apple.com/kb/ht1277

.local domain and autodiscover issues

I want to preface this by saying I am a new administrator.
Our SSL cert recently expired, and since .local domains can no longer be on certs, were registered a CA cert with autodiscover.domain.com and mail.domain.com. This new cert was successfully applied, but whenever someones opens their e-mail they get a warning
about the name on the server not matching the cert. I
I'm pretty sure this is juts a few DNS records I need to update but I don't know which ones and really need some guidance.
Thanks for your time.

So what you are saying is that his current DNS for company.com (which his internal users use for external access) needs to be duplicated internally, then modified to support his internal email access? I've set up many systems where internal DNS and
external DNS hosted the same name, and it is far from simple as "a new zone takes less than a minute to create". How do you handle internal access to external sites (which is currently working just fine with his external DNS)?
To answer your question, my recommendation is that his internal clients use AutoDiscover to gain their internal settings. Keep in mind that while the Exchange server may be in the .local domain, the SMTP domain they host is a .com domain. And since his servers
are in a domain, any domain-attached Outlook client will be able to access the mailbox successfully.
Just create a new DNS record pointing to the external host. Or get a new domain name that doesn't have external websites, then create a new DNS zone for that.
Alright, so with your recommendation - he updates his clients to use Autodiscover, which they are likely already using, to gain internal settings. And then what do you configure the internal URLs as?
For example - Autodiscover.
You set the AutoDiscoverServiceInternalURI to servername.domain.local -> he still gets a cert prompt every time he opens Outlook.
You set the AutoDiscoverServiceInternalURI to mail.domain.com to match the certificate -> Now ALL autodiscover requests from all clients are going out to the internet, then back into the Public VIP.
Same with EWS. And this is assuming he's using RPC/TCP rather than HTTP. So then he's either going to get prompts for cert every time he opens outlook and checks OOF or mailtips, or all internal clients are going to use the external VIP for Autodiscover
and EWS.

Edge Inspect - IIS local domains issue

Hi,
I am a Windows 7 user and I'm currently checking if Adobe Edge Inspect is a tool we can use at our company.
We run .NET projects and use IIS for local domains.
When we use Edge Inspect on mobile devices the websites won't show.
The domains are listed in the hosts file, for example: 127.0.0.1 2012.companyname.local
I saw the posts about xip.io and charles proxy but all the info in these discussions is Mac OSX based.
Is there any support for Win users?
gr,
Peter

I work on a Windows machine and have successfully used both Charles Proxy and xip.io to reach local domains defined in my hosts file. I use WAMP server though, so the difference for you might be IIS.
You've seen our blog posts on this topic?
http://blogs.adobe.com/edgeinspect/2012/06/19/shadow-xip-io-virtual-hosts-workflow-simplif ied/
http://blogs.adobe.com/edgeinspect/2012/05/16/shadow-charles-proxy-virtual-hosts-workflow/
I think those instructions work for both Mac and Win.
Can you tell me what the full URL you're putting into Chrome is?
Can your devices reach your pages by using your machine's IP address (shown at the top of the Chrome extension dialog) instead of the local domain?

How to send email to a SMTP server over a secure channel using STARTTLS setting of a send connector (Exchange and SMTP server are in the same domain)

I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!

-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET,

Strange info in "Bypass Proxy Settings for These Hosts and Domains"

For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
Thanks

When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network and choosing to set up again.
Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
In this case, proxies are not an issue, and are simply a distraction from the real problems.

List all printers configured from server and local machine when hosted in server machine and working from Client machine

Hello Team
I am developing web application in asp.net. When application run from IIS(hosted in server machine running from client machine using web browser) application should list all the configured printers in local and network.
can any one please let me know the process, in this i was able to load printers from server, so need to load printers from local machine.
Thanks in Advance
Bindu

Hi Bindu,
I am developing web application in asp.net. When application run from IIS(hosted in server machine running from client machine using web browser) application should list all the configured printers in local and network.
From this message, this is a web application in asp.net, and it also related to IIS.
You should post in the dedicated ASP.Net Forum
http://forums.asp.net
For IIS issue, http://forums.iis.net/ IIS forum should post.
Thanks
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How To: Use Visual Studio, IIS Express, and Adobe Edge Inspect to view local projects

You CAN view a Visual Studio project with Adobe Inspect. The work around takes a little bit of time.
This involves using IIS Express to run your Visual Studio project, which is mainly a setting in Visual Studio, a Firewall change, a few command line and IIS Express config change. It isn't actually all that bad, but will make your life A LOT easier.
Here are the steps. (Note these are steps I used for Visual Studio 2012 and your project is part of a solution project. Windows 7 or Windows 8)
1. If IIS in not turned on, turn it on.How to: Enable Internet Information Services (IIS) - this should install IIS Express as well.
2. In Visual Studio, find the port that Visual Studio will be using for your project by Running your web project (Debug), and note/write down/save the port number that shows up in the browser when the project launches. (ex. http://localhost:12345)
3. Add a NetShare Reservation (process for this will be different for Windows XP)
Go to your Command Line (CMD) in Windows and in c:\Windows\system32> type in
netsh http add urlacl url=http://yourIPaddress:yourPortNumber user=everyone
(ex. netsh add urlacl url=http://12.34.56.78:12345 user=everyone)
Hit Enter key. You should be a successful add reservation message
3. Go to your Windows Explorer (File system) and go to c:/Users/YourName/MyDocuments (or Documents)/IISExpress/config/ and open 'applicationhost.config'
In the 'applicationhost.config' file find your site in the <sites> section.
Example:
<sites>
<site name="WebSite1" id="1" serverAutoStart="true">
                <application path="/">
                    <virtualDirectory path="/" physicalPath="C:\MyProjects\TestSite" />
                </application>
                <bindings>
                    <binding protocol="http" bindingInformation=":12345:localhost" />
                </bindings>
            </site>
</sites>
In this section ADD 2 new lines to the <bindings> section. Note add your own IP address and your own Computer Name
<binding protocol="http" bindingInformation="*:12345:12.34.56.78" />
<binding protocol="http" bindingInformation=":12345:MyComputerName" />
Save the config file.
4. Open up your Windows Firewall and go to 'Advanced Settings'. Here you want to create an Inbound Rule.
Right click on Inbound Rule and select New Rule
- Rule Type select 'Custom'
- Program leave this
- Protocol and Ports > Protocol Type select 'TCP' then Local Port select 'Specific Port' and fill in the port number you got from VS. Leave Remote Port alone.
- Scope
There are a few ways of doing this. Typically you would go the the Remote IP address and select 'These IP addresses: and select ADD > select 'Predefined set of computers' and choose Local Subnet. IF this does not work leave Remote IP addresses > Any IP address option selected instead.
- Action leave this
- Profile select Domain and Private
- Name put IISExpressWeb for the name
Select 'Finish'
5. Go to Visual Studio. (Note if you have multiple projects in your solution, choose your start up project. Right click on your project in Solution Explorer in VS and select 'Set as Start Up Project' )
Right click on your start up project again and you should see an option to 'Use IISExpress'
In the DEBUG dropdown (from the main menu bar at the top) select 'YourProjectName Properties'. Mine was the last one in the list with a wrench icon next to it.
This should open an new tab in your project, You should see a left hand list of option and a right hand column of options.
In the left column select 'Web' and in this tab select Use Local IIS Web server and select 'Use IIS Express' and type in your IP Address and port number (same as before) in the Project Url text box.
Save.
NOW, you should be able to run your project in Visual Studio and use Adobe Edge Inspect on your device and view new results in Chrome. You can develop from there.
If you still can not see it working, please be sure your device is on the same SubNet or Wireless network as your computer. If you are in a large network but the domains can still see each other, the Firewall Setting detailed above to allow Any IP Address in your Scope section.

Hi CMosqueda,
Thank you for taking time to share this information with other users.
Thanks,
Preran

SIP and SMTP domains don't match

Hi,
We’ve a situation where SIP, SMTP and AD domain are different than each other and I am sure this will present integration issues at the least...
Speaking from LYNC 2013 and exchange 2010/2013 integration standpoint, could someone please point out to integration process under below circumstances where
SIP domain         uc.contoso.com
SMTP domain      contoso.com
AD domain          contoso.net
Also, how would exactly the logon will occur in this situation?
I'd appreciate if you could point me to relevant document please.
Regards, Pushkal MishrA, This posting is provided “AS IS” with no warranties and confers no rights. I request you to test the solution in lab and post successful outcome you should try this on production.

Hi Pushkal Mishra,
It’s recommend to use the same SIP and SMTP address.
But if they are not the same, they will still work properly if you take some additional work.
I’m assuming that you have published the correct SAN certificate that has every expected SAN name for each domain, then you have to create an additional SRV record for uc.contoso.com.
_autodiscover._tcp.uc.contoso.com
mail.contoso.com        443
In general, Lync will look at your primary SMTP address and attempt to use it to find the EWS URL via Autodiscover after signing in. But if the SIP and SMTP address does not match, you will receive
a security prompt “Lync cannot verify that the server is trusted for your sign-in address”.
To avoid the issue, the best solution in my opinion is to use SRV records for Autodiscover to redirect Lync to the mail.contoso.com A record. (Delete the Autodiscover A record)
Best regards,
Eric

Settings of Mail Host and Mail Port in transaction: SCOT for the node: SMTP

Hi,
Could anyone please explain me the significance of Mail Host and Mail Port for the SMTP node in transaction: SCOT.
It says Mail Server to which outbound mails can be passed.
Can i specify my GMAIL ID in the field Mail Host and left blank the Mail Port so that the mail can be sent to my GMAIL Account.
Please let me know if further details are required from my side.
Thanks & Regards,
Goutham.

the below are the step to configure your mail server of anhy type ....
Steps to perform in SAP:
1. Transaction SM59 Setup an RFC Destination for the execution of the email transfer
a. Name: Internet Mail Gateway
b. Connection Type: T
c. Description: Internet Mail Gateway
d. Activation Type: Start
e. Explicit host:
i. Program: c:<dir>mlunxsnd (I used c:sapmail)
ii. Target Host: <Server_Name>
f. (MENU) Destination -> Gateway Options
i. Gateway Host: < Server_Name>
ii. Gateway Service: sapgw00
iii.<OK>
g. SAVE
2. Transaction SCOT Setup a default domain for your system
a. (MENU) Settings -> Default Domain
i. <Default_domain> (i.e. [email protected], Domain company.com)
ii. This setting gives a default to any user who does not have their email address maintained in the system. <user_name>@<default_domain>
3. Transaction SCOT Setup of the Node for queuing the emails before transfer to Exchange
a. Click on INT -> Create button
b. Give Default name (I choose EXCHG, as this was the node type for the Exchange Connector)
c. Give Description
d. Assign the RFC Destination previously created (Internet Mail Gateway)
e. Node: Internet
f. Address area: *
g. Supported address Types:
i. All formats except the fllw
ii. ALI, OBJ, OTF, SCR, URL
h. Choose Ok and Save
4. Transaction SCOT Setup a job to execute the send process on the queue.
a. (MENU) View -> Jobs
i. Select the Create Button
ii. Job Name: SAPConnect
iii. Put Cursor on Variant: SAP&CONNECTINT *As you created an INT Node, you need to run the variant for all of the INT sending. You can select SAP&CONNECTALL, but if you are not using any other node types, you can run with SAP&CONNECTINT.
iv. Select: Schedule Job Button
v. Schedule job for a periodic run approx. every 15 minutes
vi. Save
5. Transaction SU01 Maintain each users email address
a. Select users who require the ability to email from SAP
b. Under the address tab, in SU01, maintain their email address.
Steps to perform on the SAP system (operating System):
1. Create a directory for the SAP programs.
a. Create directory c:sapmail (Directory can be anything)
b. Unpack the ML*.CAR file from SAPs website
c. Alternatively, copy the ML* files from /usr/sap/../run/ directory. This ensures version compatibility with your SAP instance.
2. Create the directories for your sendmail program
a. http://emailrelay.sourceforge.net/
i. Download the emailrelay program
b. Create directory c:winntspoolemailrelay
i. Unpack the contents of the emailrelay zip into this directory
c. create Directory c:reskit (Used to make the emailrelay program run as a service
i. http://www.tacktech.com/display.cfm?ttid=197
1. www.tacktech.com had some great instructions for creating a service on the NT side. (Thank you Tacktech)
2. Use SRVANY to create the services, as documented below.
d. Open command prompt
e. Follow instructions for creating a service
i. cd reskit
ii. execute c:reskitinstsrv.exe "<SERVICE_NAME_Engine>" c:reskitsrvany.exe
1. This service is the engine
iii. execute c:reskitinstsrv.exe "<SERVICE_NAME_Send_Process>" c:reskitsrvany.exe
1. This service is the send process
iv. Modify the registry to represent the two new services
v. View instructions for Parameters and Application Creation under the services in the registry
vi. Command lines should be as follows:
1. <SERVICE_NAME_Engine> - c:winntspoolemailrelayemailrelay.exe --as-server --no-daemon
2. <SERVICE_NAME_Send_Process> - c:winntspoolemailrelayemailrelay.exe --no-daemon -hidden --forward-to (your_mailhost):SMTP --poll 5
vii. Start the services using service mgr.
f. cmd prompt cd sapmail
g. mlsomadm c:sapmailmailgw.ini (see below)
3. Create a mailgw.ini file (This file is used by the mlunxsnd program)
a. Open a command prompt
b. Change to the directory c:sapmail
c. Run command mlsomadm c:sapmailmailgw.ini
i. This creates the parameter file for the send process.
d. MAILGW.INI entries
i. System Name: [SID]
ii. Client: [000]
iii. Username: [MAILADM] no user required, as this is not being used for your connection
iv. Password: [*******] leave empty
v. Language: [E]
vi. Load Balancing: [N]
vii. Hostname: [app_server_name]
viii. System Number: [00]
ix. Gateway Hostname: [ ] you do not have to specify, it will use the default
x. Gateway Service: [ ] default will be used
xi. Use SAP Router: [N]
xii. Set Bcc Flag on Env..: [N]
xiii. Trace Level <In..>: 1
xiv. Trace file <In..> c:sapmailtracein.txt - Can be where ever you want
xv. Sendmail Command: c:winntspoolemailrelaysubmit -from <SENDER_ADDRESS>
xvi. A warning may come up that says to not use the t flag. IGNORE
xvii. Codepage: [ISO-8859-1]
xviii. Generate Notificat..: [N]
xix. Trace Level <Out..: [1]
xx. Trace File <Out..>: c:sapmailtraceout.txt - Can be where ever you want
xxi. Update File c:sapmailmailgw.ini [Y]
Steps to perform on the Microsoft Exchange System
1. Allow the SAP systems to enter on port 25 to send mails using Microsoft Exchange (SMTP Communication)
reward points ....
Girish

RDS - .local domain and external users. Best way to get rid of SSL warnings

I am evaluating MS RDS as a possible solution for a VDI implementation at the college I work for. When we setup our AD years ago we set it up as a .local domain. I am running into issues with the .local machine name on the connection broker for
external users. I know for internal domain systems we can setup the self signed .local cert as a trusted root cert to bypass the self signed untrusted warning but for the bulk of our users which will be using systems external to our domain they
will get the SSL warning about the self signed certificate when they try to connect to a remote app or a desktop.
Initially I thought if I setup a local AD CA that we could setup a trust relationship with the SSL cert. After further reading I believe that this would only work for systems internal to our domain and we would still have the issue with external devices.
The other option would be to tell our users to click the box to never display the warning message again and to go on or to add the self signed cert to their trusted list. Of course when ever you ask the user to do something there will be issues. We
have also found that in our testing that we can not seem to connect via the web portal with a macbook. We get an error that there is a problem with the trust relationship with the server after we login and click on an app or a desktop to connect. We
have been able to connect with iOS devices.
We could of course rename the .local domain to a .edu domain which would permit us to use our wildcard certificate but that is a major undertaking that we don't want to cross at the moment. I think I might have some up with a solution and wanted to
bounce the idea off of those on this forum.
If we setup a second domain on campus that is not a .local. Join the non internet facing RDS systems to this new domain that would have a SSL cert that was trusted and then setup a full trust relationship between the two domains such that users and
systems in one domain could communicate with the systems in the other domain would that remove the certificate warnings for external users?

Hi AKlein,
Initially I thought if I setup a local AD CA that we could setup a trust relationship with the SSL cert. After further reading I believe that this would only work for systems internal to our domain and we would
still have the issue with external devices.
Just add the root CA certificate of the internal CA into Trusted Root Certification Authorities store on external clients manually (or through group policy if there is an external domain), then SSL certificate warning would be gone.
We could of course rename the .local domain to a .edu domain which would permit us to use our wildcard certificate but that is a major undertaking that we don't want to cross at the moment.
Yes, renaming domain is not recommended due to its complexity.
If we setup a second domain on campus that is not a .local. Join the non internet facing RDS systems to this new domain that would have a SSL cert that was trusted and then setup a full trust relationship between
the two domains such that users and systems in one domain could communicate with the systems in the other domain would that remove the certificate warnings for external users?
If you are setting up a new domain with two way trust, then root CA certificate of the internal CA still needs to be distributed manually (or through group policy). If you are setting up a child domain, then enterprise CA would be trusted within the same
forest.
As long as there are enough external users and devices to manage, an external private network exists and extra domain management tasks are acceptable, then setting up a new domain is a good choice since domain provides secure boundary.
Or, you could just create a new site from the other network location, which saves you from creating a new domain, new users and trust.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Pop3 and smtp setting requried for buness catalyst hosted site

pop3 and smtp setting requried for buness catalyst hosted site.
we need to get setup email client like outlook with this setting .

I am also getting another issue during setup email account in to manage users section .
I am getting bellow error msg .
ERROR: License limit reached. Please contact your system administrator.
But as per our client they have already purchased email on BC.

Server host and domain name have changed, which files do I edit?

I just changed my Linux box server name and host name. I am going to edit the:
tnsnames.ora
sqlnet.ora
listener.ora
files to reflect the new host and domain name, are these the only files I need to edit?
Thanks!

OK here is my output when I try 2 different tnsping commands on my remote Linux box from my local PC:
1.)
C:\Documents and Settings\Rick>tnsping db.host.mtdomain.com
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 13-NOV-2005 07:38:55
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
C:\oracle\ora92\network\admin\sqlnet.ora
TNS-03505: Failed to resolve name
2.)
C:\Documents and Settings\Rick>tnsping mydomain.com
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 13-NOV-2005 07:36:07
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
C:\oracle\ora92\network\admin\sqlnet.ora
Used HOSTNAME adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SID=*)(SERVICE_NAME=mydomain.com))(ADDRESS=(PROTOCOL=TCP)(HOST=mydomain.com)(PORT=1521)))
OK (250 msec)
Here are my sqlnet.ora, listener.ora, and tnsnames.ora
# SQLNET.ORA Network Configuration File: /home/oracle/Oracle9i/product/9.2.0/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DEFAULT_DOMAIN = host.mydomain.com
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
# LISTENER.ORA Network Configuration File: /home/oracle/Oracle9i/product/9.2.0/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = host.mydomain.com)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /home/oracle/Oracle9i/product/9.2.0)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = db9i)
(ORACLE_HOME = /home/oracle/Oracle9i/product/9.2.0)
(SID_NAME = db9i)
# TNSNAMES.ORA Network Configuration File: /home/oracle/Oracle9i/product/9.2.0/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
DB.host.mydomain.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = host.mydomain.com)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = db)
EXTPROC_CONNECTION_DATA.host.mydomain.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
INST1_HTTP.host.mydomain.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
)

How do I change an IP address of SQL Server which is locally hosted and is not on cluster?

Hi All,
How do I change an IP address of SQL Server which is locally hosted and is not on cluster?
I am asking about IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
aa

Full explanation can seen here:
SQL Server: Configure Listening IP, Port, and Named pipe
http://ariely.info/Blog/tabid/83/EntryId/151/SQL-Server-Configure-Listening-IP-Port-and-Named-pipe.aspx
[Personal Site] [Blog] [Facebook]

How to change Host and domain name on APS 10g R2

Hi,
I have installed oracle application server 10g rel.2 I want to change the host and domain of the system, what should I do, Plz help.
Thanks and Regards.
Khawar

Hi,
Thanks to all of you for reply, I started without reading any manual to modify host and domain name and after expending several hours finally decided to reinstall APS, with new installation forms runing ok but report server having problem if you see the status of report server in enterprise manager it shows green mark(if you want to stop it via EM it will not), if you check with Report Queue manager it says no report server with the given name,
if you check the report with GETSERVERINFO via browser it says
"REP-51002 Bind to report server AAAAA failed. some one have idea."
some one plz explain me how can I fix it.
Thanks and Regards.
Khawar

Local domain, IIS Hosting and SMTP issues.

Similar Messages

Maybe you are looking for