Local group policy application issues
I'm having some issues with applying local group policies using ZCM 11.2.3a. Basically, not all of the settings I've applied in the GPO are being applied to the PC.
The setup is this:
* Applying policies to Windows 7 Enterprise x64
* User Group Policies are applied first, then Computer policies are applied. User policies seem to be applying correctly.
* Security settings in the Computer Group Policy are applying correctly (eg, renaming the local administrator and guest account, displaying a message prior to the logon window).
* The policies list in the ZCM agent properties reports that the policy has been successfully applied.
* No settings in the 'Administrative Templates' section of the policy are applied to the PC.
Checking in gpedit.msc, policies show that they're enabled. However if I run rsop.msc, there's no administrative templates section in the computer policy at all. If I run gpupdate /force, I also get errors for the computer configuration - 'The processing of Group Policy failed because of an internal system error'.
This is a new policy package I've created from scratch within the past week.
I've just now also gone and created a brand new test policy package, with one setting in admin templates configured, and one in security settings. This one has successfully applied correctly.
Is anyone else seeing issues like this? It's not the first strange behaviour I've been seeing with ZCM policy application, and not the first policy package we've had that's become corrupted. I'm really starting to lose confidence in policy application via ZCM. Unfortunately, with no AD in our environment, I've got no alternative.
Originally Posted by thatsnotme
I'm having some issues with applying local group policies using ZCM 11.2.3a. Basically, not all of the settings I've applied in the GPO are being applied to the PC.
The setup is this:
* Applying policies to Windows 7 Enterprise x64
* User Group Policies are applied first, then Computer policies are applied. User policies seem to be applying correctly.
* Security settings in the Computer Group Policy are applying correctly (eg, renaming the local administrator and guest account, displaying a message prior to the logon window).
* The policies list in the ZCM agent properties reports that the policy has been successfully applied.
* No settings in the 'Administrative Templates' section of the policy are applied to the PC.
Checking in gpedit.msc, policies show that they're enabled. However if I run rsop.msc, there's no administrative templates section in the computer policy at all. If I run gpupdate /force, I also get errors for the computer configuration - 'The processing of Group Policy failed because of an internal system error'.
This is a new policy package I've created from scratch within the past week.
I've just now also gone and created a brand new test policy package, with one setting in admin templates configured, and one in security settings. This one has successfully applied correctly.
Is anyone else seeing issues like this? It's not the first strange behaviour I've been seeing with ZCM policy application, and not the first policy package we've had that's become corrupted. I'm really starting to lose confidence in policy application via ZCM. Unfortunately, with no AD in our environment, I've got no alternative.
We have the same problem.
It does not occur on all clients. Only sporadically. Some settings are applied, some not.
We also have ZCM 11.2.3a in use.
Have you already opened a SR on this? Can you let us share the information? Perhaps an SR number so that we can attach ourselves?
Thanks Stefan
Similar Messages
-
How to apply Software Restriction policy for specific user in local group policy object ?
I am working on implementing user based software restriction policy programmatically for local group policy object.
If i create a policy through Domain Controller,i do have option for software restriction policy in user configuration but in local group policy editor i don't have option for that.
When i look for the changes made by policy applied from Domain Controller in registry, they modifies registry values for specific users on path HKEY_USERS\(SID of User)\Softwares\Policies\Microsoft\Windows\Safer\Codeidentifiers
They also have registry.pol stored in SYSvol folder in Domain Controller. When i make the same changes in registry to block any other application, application is getting blocked.
I achieved what i wanted but is it right to modify registry values ?
PS:- I am using Igrouppolicyobject APII achieved what I wanted but is it right to modify registry values ?
You also can modify a registry programmatically based policy. Check this:
http://blogs.msdn.com/b/dsadsi/archive/2009/07/23/working-with-group-policy-objects-programmatically-simple-c-example-illustrating-how-to-modify-a-registry-based-policy.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I need to find a way to have the local administrator of a Windows Server 2012 system grant a local user (non-administrator) the ability to add a user for the machine using the local group policy editor. The machine is not part of any Active Directory environment,
this is strictly on the one machine. In my situation it is not an option to just make the user an administrator. The idea is to give someone the right to add a user and have no other such administrative rights. I need to accomplish this using the
Local Group Policy editor or the Group Policy Management Console if it is possible to do this outside of an active directory environment. This is not an assignment to learn how to use these tools and I am not even sure if it would even be possible though I
need to either find a way or find proof that it is not possible using these applications.Hi,
Sorry for the delay reply.
So did you want to non-admin user have the ability to add another user?
As far as i know, we cannot add the user if we have no local admin permission, we will receive the error"Access denied".
Regards.
Vivian Wang -
ActiveX msi Flash Player 10.0.42.34 group policy deploy issue
I have been deploying the flash player to our workstations since version 9. We have a 2003 AD domain and XP SP3 workstations.
I know that it is recommended to use the flash uninstall program to remove flash when installing a new version but I haven’t taken the time to work on that type of scripting for any install. Any attempts to uninstall the previous versions of flash via group policy when deploying have never worked. I had the same experience with java 1.5 jres…they would never uninstall via policy.
I have had success so far with deploying the latest version to the workstations with a new policy while leaving the old policy applied until a few weeks have past when all the workstations have been updated.
I am in the process of deploying Flash Player 10.0.42.34 to replace Flash Player 10.0.32.18
My test deploy to my virtual XP test workstation worked with no problems. The flash test paged detected the newer version and the correct version was in add/remove programs.
I then did a test deploy to a production workstation and the software installed without errors (the group policy install went extremely fast so I knew something was wrong). No errors were reported in the workstation application log. However when you visited the flash test page no version of flash was detected. I also checked in add/remove programs and the program icon was the windows installer icon instead of the normal red flash box….this has been associated with other installation issues in the past.
I have tried this on 3 other production machines and experienced the same results. My virtual XP test workstation has only had version 10.0.32.18 on it so I am guessing that having had the older versions of 10 on the production workstations is causing the problem somehow.
I have had issues in the past, but nothing like this. Looks like I may have been owned by adobe on this one.
Any insight would be appreciated.
ThanksSure , here is the url :
http://www.forevermark.com/ja-jp/The-World-of-Forevermark-/Precious-Collection/
On some machines , the Japanese text in the centre section appears very large. ..( see attached snapshot)
We initially encountered this on the version prior to the 10.0.42.34 version.
However even after the upgrading to 10.0.42.34 , the problem still persists .
Thanks -
11.5.2.602 Group Policy Installation issues
Consider the following scenario:
BigCorp wants to deploy a limited amount of software to their MS Windows desktop service, such that they can provide a rich browsing experience at login after a machine is joined to the domain. To facilitate this, they deploy browser plug-ins such as Flash and Shockwave using group policy software installation (GPSI).
This is a sensible decision, as there are vendor provided MSIs available to use and it ensures that the software is easily managed (upgrades, removal etc)
When attempting to deploy Shockwave v11.5.2.602 an incorrect repair of the MSI is triggered on first use of the software for each user.
On a standalone, otherwise clean, Windows XP SP3 machine with IE7:
1. Install the software as a user with the correct rights (AdminUser), using the MSI direct from Adobe.
2. Logout AdminUser and Login StandardUser
3. Visit http://www.adobe.com/shockwave/welcome/ - At this point the MSI runs a repair and logs the following to the application event log:
Event Type: Warning
Event Source: MsiInstaller
Event Category: None
Event ID: 1004
Date: 02/12/2009
Time: 09:30:48
User: IT-2220-VM4\Standard
Computer: IT-2220-VM4
Description:
Detection of product '{7D0F2155-D7D3-42CE-903F-684ADD77FF89}', feature 'Adobe_Shockwave_Player_', component '{E89F323D-7BDB-46E1-A0FD-6227821F94EA}' failed. The resource 'C:\Documents and Settings\AdminUser\Application Data\Adobe\' does not exist.
Event Type: Warning
Event Source: MsiInstaller
Event Category: None
Event ID: 1001
Date: 02/12/2009
Time: 09:30:48
User: IT-2220-VM4\Standard
Computer: IT-2220-VM4
Description:
Detection of product '{7D0F2155-D7D3-42CE-903F-684ADD77FF89}', feature 'Adobe_Shockwave_Player_' failed during request for component '{3D3697FC-DB90-46D8-9ED4-5D54B4901F62}'
*** Please note the path in EventID 1004 above (C:\Documents and Settings\AdminUser\Application Data\Adobe\) has been generated whilst logged in as StandardUser NOT AdminUser. ***
This condition will always be true, since there is no read permission on another users profile for a standard user account. Granting this right is not desirable in a roaming profile environment. This repair will be triggered for each and every user of the machine.
Though this repair appears to be non-destructive and doesn't appear to inhibit successful removal, it is undesirable behaviour.
Furthermore, and as other have mentioned, loading a shockwave item in a browser (IE7 in our case) also results in the following entry in the system event log:
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10000
Date: 02/12/2009
Time: 09:30:49
User: IT-2220-VM4\Standard
Computer: IT-2220-VM4
Description:
Unable to start a DCOM Server: {1F3CB77D-D339-49E0-B8E4-FECD6D6F8CB8}. The error:
"The filename, directory name, or volume label syntax is incorrect. "
Happened while starting this command:
C:\WINDOWS\system32\Adobe\SHOCKW~1\SWHELP~1.EXE" -Embedding
We are keen to move to the latest version of Shockwave, for the obvious reasons, but these issues are going to make it difficult to get through our change management processes; as the package doesn't meet the requirements we have laid out for our user experiences.
Can someone at Adobe comment on the reason for this undesirable behaviour and how it came about? Can we expect later versions of Shockwave to exhibit the same behaviour?Hi,
I have posted an MST file which fixes this and other issues to the following thread here:
http://forums.adobe.com/message/2697135#2697135
Please post any feedback to that thread!
Kind regards,
Chris Hill -
Group Policy Application Managment
Hi,
I am having one DC & ADC both are the virtual machines now one SAP Application is running in the domain and i want to give access only those user's who are in AD.
Kindly help me out or let me know the group policy how do i apply that.??? URGENT.
Regars,
Ravi Kumar
Email - [email protected]HI
You need to better post on SAP Forums however belwo are the high level,
In SAP, you need to configure SSO integration with AD user account.
Configure Logon PAD with SSO enabled,
We cannot provide access to SAP via AD GPO and it needs to be done on SAP -
Group Policy application frequency even if policy hasnt changed - Server 2012 R2
Hi,
I'm aware of the group policy refresh intervals which apply only if the policy has changed. If I remember correctly, Server 2003 applied policies every 16 hours even if they hadnt changed. A sort of "to be sure, to be sure" setting. Does
this exist on Server 2012 R2 and is there a link with some doco that states this please?
Thanks
David Z> the policy has changed. If I remember correctly, Server 2003 applied
> policies every 16 hours even if they hadnt changed. A sort of "to be
> sure, to be sure" setting. Does this exist on Server 2012 R2 and is
> there a link with some doco that states this please?
This is still true, but it applies only to "Security Settings" within
all GPOs. I'm unaware of current docs on that.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-: -
EMET v5.1 ADMX Group Policy Template Issue - Default protection settings can't be disabled
I am configuring EMET v5.1 (from 11/18/14) settings via GPO using the custom EMET admx template provided by Microsoft. I am able to enable all the EMET settings via GPMC and disable most of them, but I am not able to disable these 3 EMET setting via
GPMC in a GPO:
Default Protections for Internet Explorer
Default Protections for Popular Software
Default Protections for Recommended Software
When configuring any of these 3 EMET GPO settings to disabled and pressing apply or OK, GPMC keeps it at Not Configured, it does not change to disabled as it normally would. I have never before seen this in GPMC, where you try to disable a setting and it
doesn't change to disabled.
Unless this is somehow intended by Microsoft for these 3 EMET GPO settings, I think that this is a glitch/bug in the EMET GPO Template or the way that it works in GPMC.
Looking for some Guidance from a MS Rep to replicate this issue or anyone else who can confirm if they also see this issue. I have tested on multiple Windows 8.1 Enterprise x64 Update 2 Workstations, with GPMC loaded and the latest EMET ADMX file loaded
from the EMET client on 11/18/14. I have tested this in 2 separate domains, Note that we do not have Central ADMX Stores in either domain.I had a similar requirement as yours and found that we were able to get around in a simpler method then what was listed here. What we did was set GPO Preferences Registry changes which would then override the previously set EMET ADMX settings set from
another global GPO.
To be specific we had some thirds applications which were add-ons to Microsoft Excel, and the EMET was preventing the application from talking to Excel. So for the users that use this application we have a GPO which Does the following in the Preferences
section:
Action: Replace
HIVE: HKEY_LOCAL_MACHINE
Key path: SOFTWARE\Policies\Microsoft\EMET\Defaults
Value name: Excel
Value type: REG_SZ
Value data: *\OFFICE1*\EXCEL.EXE -Caller -MandatoryASLR -
Problem Pushing Printer Preferences through Group Policy
Most of the time, networked printers that we push through group policy preferences show up just fine on our clients (Windows 7). About 1 in 10 computers fail however, and it's driving me up the wall! The computer that fails is not consistent, meaning I can
reboot a computer and the printer then shows up correctly. It may not, however, a week later. Fairly random. Looking through the application event log, I uncovered this:
The user 'myprinter' preference item in the 'mygrouppolicy {7EDE8A14-773C-4E43-93AE-050240E0B204}' Group Policy object did not apply because it failed with error code '0x800706ba The RPC server is unavailable.' This error was suppressed.
Again, this error does not occur all the time, though if I reboot a large group of computers, it will definitely show up on 1 or 2 of them. At this point, I'm looking for any suggestions for a next step. Thanks!
-PeterHello Modab,
If you reboot server the printer is redeployed properly. It is possible that when the printer is deployed the network is still not prepared properly so the RPC error
is popped up. Please try the following suggestions:
1. Disable Fast Logon feature
Enable the
[Computer Configuration \ Administrative Templates \ System \ Logon \ Always wait for the network at computer startup and logon]
group policy.
Logon Optimization
http://msdn.microsoft.com/en-us/library/aa374350(VS.85).aspx
Description of the Windows XP Professional Fast Logon Optimization feature
http://support.microsoft.com/kb/305293/en-us
2. Group policy application issue may occur because of Gigabit NIC. Please try the suggestions in the following steps and KB.
a.
To prevent your network adapter from detecting the link state(For Windows Vista/7):
Run the following commands one by one:
netsh interface ipv4 set global dhcpmediasense=disabled
netsh interface ipv6 set global dhcpmediasense=disabled
For Windows XP, you can see
http://support.microsoft.com/kb/239924
b.
Contact the vendor of the network card or visit their web site to obtain updated drivers for the Gigabit NIC.
Examples of NICs known to exhibit this issue:
- Broadcom Gigabit Adapter
- Intel Gigabit Ethernet PRO Adapter, Intel Pro/1000
- Intel 82544EI-based XT Gigabit Adapter (82540EM chipse)
- Compaq/HP NIC dual interface 10/100/1000 doing teaming (HP NC7170)
- Dell Inspiron laptops using an on-board Broadcom BCM4401 NIC
c.
A sever may have a Dual Port NIC or multiple NIC's with one port or NIC set to Disabled. The disabled port or NIC should not be at the top of the binding order in the Network
Advance Properties.
1.
Click Start, point to Settings, and then click "Network and Dial-up Connection".
2.
On the Advanced menu, click "Advanced Settings".
3.
On the "Adapters and Bindings" tab, in the connections list, select the NIC that the clients use to connect to the server and move it to the top of the list.
d.
Turning off STP can cause issues in your network if a loop ever develops. If you are running a Cisco Series switch or any other switch that runs Spanning Tree, it is best to
leave spanning tree turned on, but enable PORTFAST on all the ports except uplink and fiber trunks.
326152 Cannot connect to domain controller and cannot apply Group Policy with Gigabit Ethernet devices
http://support.microsoft.com/default.aspx?scid=kb;EN-US;326152
3.
Remove all of 3rd-party software such as firewall software.
4. Set a registry value to delay the application of Group Policy.
http://support.microsoft.com/kb/2421599
http://support.microsoft.com/kb/840669
Brent Hu,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
Happy Friday everybody -
I'm working on implementing Microsoft RDS 2012\VDI for the folks here at work. I've read - online - a lot of articles on VDI and RDS 2012 - and have a working model that is working somewhat satisfactorily. I haven't seen much online about steps
I could take in Local Group Policy on my Windows 8.1 'gold image' - or for that matter Domain level group policy - that can assist in creating a better, more reliable/robust Windows 2012 VDI environment.
Anybody out there got any information or opinions or advice on Group Policy settings for VDI environments?
Thanks again, everyone!
Adrian
anrHi Adrian,
Thank you for posting in Windows Server Forum.
In regards to your issue you can refer beneath article for detail information.
1. Group Policy Best Practices for VDI Environments
2.Some Basic Group Policy Settings for VDI
Hope it helps!
Thanks.
Dharmesh Solanki -
Local User Rights Assignments overwritten by AD DS User Rights Assignments Group Policy
Hello,
I have a AD DS Group Policy being pushed out to all machine on my domain to for privileged domain service account (Deny log on locally & Log on as a service). I also have a couple machines in the domain that have a local service account which also needs
the same rights/restrictions.
We attempted to add the local service account into the AD DS Group Policy. This works but it generates errors on all machines which do not have the local service account on them.
We attempted to set this in the local Group Policy editor on the machines with the local service account but the AD DS Group Policy will overwrite it.
Does anyone know of a solution to merge User Rights Assignments rather than overwrite them?Hello,
I have a AD DS Group Policy being pushed out to all machine on my domain to for privileged domain service account (Deny log on locally & Log on as a service). I also have a couple machines in the domain that have a local service account which also needs
the same rights/restrictions.
We attempted to add the local service account into the AD DS Group Policy. This works but it generates errors on all machines which do not have the local service account on them.
We attempted to set this in the local Group Policy editor on the machines with the local service account but the AD DS Group Policy will overwrite it.
Does anyone know of a solution to merge User Rights Assignments rather than overwrite them?
The way I got around this is you make another OU for that computer/server.
In the GPO section you want to remove inheritance of policies applied. Then link the policies all but the one that is causing the overwrite. Place the computers in that OU and it will not over write.
If you need other things from that policy then you may make another policy just for that OU that has all you need minus the one that cause issues and want to type in manually. When a PC is placed in that OU and you do a gpupdate /force it will not get the
locked down one and you can change those settings manually. If you move it out of that OU back to the main OU then it will get the policy and overwrite the local. This is what we had to do per our Domain.
Hope this helps you out.
Darkplate ^^ -
Hi All,
Am facing plenty of issues in Group policies.. Like when i run this command "gpresult /v" i could see the same policy applied in as thrice in applied group policy.. and that policy is default domain policy.. also trying to add one of intranet site
in Internet Group policy maintenance policy but its not reflected to users.. even i forced the policy.. Please advice me on this.
i have given the gpresult fyr.. some have a quick look and advice me accordingly.
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 3/6/2014 at 9:20:31 AM
RSOP data for OURDOMAIN\venkat2r on INBRLT141 : Logging Mode
OS Configuration: Member Workstation
OS Version: 6.1.7601
Site Name: N/A
Roaming Profile: N/A
Local Profile: C:\Users\venkat2r
Connected over a slow link?: No
USER SETTINGS
Last time Group Policy was applied: 3/6/2014 at 9:07:33 AM
Group Policy was applied from: INCHDC01.OURDOMAIN.com
Group Policy slow link threshold: 500 kbps
Domain Name: OURDOMAIN
Domain Type: WindowsNT 4
Applied Group Policy Objects
ourdomain_Policy_Customized
Global_Wallpaper
ourdomain_Policy_Customized
ourdomain_Policy_Customized
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
The user is a part of the following security groups
Everyone
BUILTIN\Administrators
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
This Organization
LOCAL
High Mandatory Level
The user has the following security privileges
Resultant Set Of Policies for User
Software Installations
N/A
Logon Scripts
N/A
Logoff Scripts
N/A
Public Key Policies
N/A
Administrative Templates
GPO: Global_Wallpaper
KeyName: Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\ForceActiveDesktopOn
Value: 1, 0, 0, 0
State: Enabled
GPO: ourdomain_Policy_Customized
KeyName: Software\Policies\Microsoft\Windows\Control Panel\Desktop\ScreenSaveTimeOut
Value: 54, 0, 48, 0, 48, 0, 0, 0
State: Enabled
GPO: Global_Wallpaper
KeyName: Software\Microsoft\Windows\CurrentVersion\Policies\System\Wallpaper
Value: 67, 0, 58, 0, 92, 0, 87, 0, 105, 0, 110, 0, 100, 0, 111, 0, 119, 0, 115, 0, 92, 0, 87, 0, 101, 0, 98, 0, 92, 0, 87, 0, 97, 0, 108, 0, 108, 0, 112, 0, 97, 0, 112, 0, 101, 0,
114, 0, 92, 0, 69, 0, 109, 0, 101, 0, 114, 0, 105, 0, 111, 0, 46, 0, 106, 0, 112, 0, 103, 0, 0, 0
State: Enabled
GPO: ourdomain_Policy_Customized
KeyName: Software\Policies\Microsoft\Internet Explorer\Control Panel\HomePage
Value: 1, 0, 0, 0
State: Enabled
GPO: ourdomain_Policy_Customized
KeyName: Software\Policies\Microsoft\Internet Explorer\Main\Start Page
Value: 104, 0, 116, 0, 116, 0, 112, 0, 58, 0, 47, 0, 47, 0, 115, 0, 116, 0, 97, 0, 114, 0, 46, 0, 101, 0, 109, 0, 101, 0, 114, 0, 105, 0, 111, 0, 99, 0, 111, 0, 114, 0, 112, 0, 46,
0, 99, 0, 111, 0, 109, 0, 47, 0, 83, 0, 105, 0, 110, 0, 103, 0, 97, 0, 112, 0, 111, 0, 114, 0, 101, 0, 47, 0, 100, 0, 101, 0, 102, 0, 97, 0, 117, 0, 108, 0, 116, 0, 46, 0, 97, 0, 115, 0, 112, 0, 120, 0, 0, 0
State: Enabled
GPO: ourdomain_Policy_Customized
KeyName: Software\Policies\Microsoft\Windows\Control Panel\Desktop\ScreenSaverIsSecure
Value: 49, 0, 0, 0
State: Enabled
GPO: Global_Wallpaper
KeyName: Software\Microsoft\Windows\CurrentVersion\Policies\ActiveDesktop\NoChangingWallPaper
Value: 1, 0, 0, 0
State: Enabled
GPO: Global_Wallpaper
KeyName: Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\NoThemesTab
Value: 1, 0, 0, 0
State: Enabled
GPO: Global_Wallpaper
KeyName: Software\Microsoft\Windows\CurrentVersion\Policies\System\WallpaperStyle
Value: 52, 0, 0, 0
State: Enabled
Folder Redirection
N/A
Internet Explorer Browser User Interface
GPO: ourdomain_Policy_Customized
Large Animated Bitmap Name: N/A
Large Custom Logo Bitmap Name: N/A
Title BarText: ourdomain
UserAgent Text: N/A
Delete existing toolbar buttons: No
Internet Explorer Connection
HTTP Proxy Server: N/A
Secure Proxy Server: N/A
FTP Proxy Server: N/A
Gopher Proxy Server: N/A
Socks Proxy Server: N/A
Auto Config Enable: No
Enable Proxy: No
Use same Proxy: No
Internet Explorer URLs
GPO: ourdomain_Policy_Customized
Home page URL: http://star.OURDOMAIN.com/Singapore/default.aspx
Search page URL: N/A
Online support page URL: N/A
Internet Explorer Security
Always Viewable Sites: N/A
Password Override Enabled: False
GPO: ourdomain_Policy_Customized
Import the current Content Ratings Settings: No
Import the current Security Zones Settings: Yes
Import current Authenticode Security Information: No
Enable trusted publisher lockdown: No
Internet Explorer Programs
GPO: ourdomain_Policy_Customized
Import the current Program Settings: No
Thanks, Venkatesh. "Hardwork Never Fails"Hi,
Before going further, I have to admit that I made a mistake and Paul is right.
>>But i am not able to change the security settings in IE like adding sites in Trusted sites its grayed out.
If we don’t want to allow users to change this setting, we can configure this setting via native policy and the following blog can be referred to as reference.
Internet Explorer 10 – Add Sites To The Trusted Sites Zone With Group Policy
http://johnfail.wordpress.com/2013/11/07/internet-explorer-10-add-sites-to-the-trusted-sites-zone-with-group-policy/
If we want to allow users to change this setting, we can configure this setting via GPP Registry.
Regarding this point, the following thread can be referred to for more information.
Add Trusted Sites Via GPO but still allow users to add trusted sites
http://community.spiceworks.com/topic/326140-add-trusted-sites-via-gpo-but-still-allow-users-to-add-trusted-sites
Best regards,
Frank Shen -
Assign a local logon script using Group Policy
Is there a way to assign a local logon script using Group Policy? The reason I ask is that I wrote a logon/logoff script that will record the date/time, user, and computer for everyone who logs on to any machine in the domain. Right now it's set on a domain
GPO, so it works great for domain accounts, but I'd like to extend that functionality to local accounts as well. The only way I know how to do that would be to set my script to run using the local policy. Since I don't want to manually go around to all 400+
machines in my domain, I would rather find a simpler way of modifying the local policy. Any ideas?Martin, thank you for your response. That's exactly the kind of out-of-the-box answer I was looking for, unfortunately, it looks like I can only do that for Logon scripts. I don't see an option for Logoff. (Maybe the took the Logoff functionality out?
This article says there should be a Logoff item in the GPO, but they're talking about Windows 2000 in that article.)
Matthias, I started playing around with what you said, and I noticed that the "Scripts" key only seems to show up on my Windows 7 clients. The XP workstations don't have that key. Plus I did some testing, and I think I can do it without having
to mess with the registry at all.
So I think I have a workable solution at the moment. I found
this article that talks about copying Local Polices from one computer to another. I tried manually setting the Logon/Logoff scripts in the Local policy on a fresh machine. From that reference computer I copied the Scripts folder out of the %SYSTEMROOT%\System32\GroupPolicy\User
directory. It also created a gpt.ini file in the %SYSTEMROOT%\System32\GroupPolicy directory. The gpt.ini file contained an attribute called gPCUserExtensionNames, and one called Version. The gPCUserExtensionNames attribute specified two GUIDs, which
I assumed to be the GUIDs that identify the Local Policy. I tried manually creating the Local policy on several different machines, with several different Operating Systems, and those GUIDs always seemed to be the same (not sure why). So I copied the gpt.ini
file off the reference machine as well. When I placed all of the files I copied from the reference machine on to a new machine, everything seemed to work just fine (no registry modification necessary), with one caveat. It seemed to be running the script twice.
So I went back into the gpt.ini file and deleted one of the GUIDs listed under gPCUserExtensionNames, and now the script runs just once!
So I think this solution will work ok for me. We don't have any other Local Policies in place, so demolishing all existing Local Policies is perfectly acceptable in my case. I'm just not sure if I'm doing any damage by copying the gpt.ini file from a reference
machine (if anyone can expand on how that works, I would appreciate the peace of mind that I'm not making things worse by doing this). So all I need now is to write a Startup script, or an SCCM package to deliver the Logon scripts and associated ini files
to the appropriate location on all the domain PCs. Easy enough to do on my own. If anyone knows of a reason why this method is a bad idea, please post here. I'll be testing it out on a handful of PCs in the mean time.
Hi Guys,
Will this solution work for my case? I have a forcereboot batch script that I need to load on the local policy (logoff script through GPEDIT) however I can only load it manually. I need to do it on multiple machines (approx 5000 computers). I am having
trouble doing it using powershell. Is there any other options to do it?
Will I have to use the same GUID's you mentioned on the gpt.ini file? (gPCUserExtensionNames=[{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}] since it refers to the local script and how about the version on the gpt.ini file?
Thanks in advance.
Dash
https://social.technet.microsoft.com/Forums/en-US/1f636042-bcff-498d-93c0-e1aa89f80961/how-to-load-a-script-on-the-local-group-policy-on-multiple-computers?forum=mdopagpm -
EMET 5.0 Group Policy Settings Ignored (Probable race condition with Policy application)
In our deployment, EMET 5 seems to be ignoring group policy settings from immediately after the first group policy refresh post-boot.
Settings are being applied to the computer correctly, and are appearing in the registry correctly, and on boot, a set of Event ID 50 events are logged containing ConfigAppmitGPO (and similar for the other settings) elements with the correct settings.
Upon the first group policy refresh, further eventID 50 events are logged, with empty ConfigAppmitGPO elements.
Investigation with Process Monitor seems to indicate this is a race condition between Group Policy Registry settings being refreshed (which deletes the entries) and the EMET service reading out these settings from the registry (which appears to be triggered
by Group Policy application or by a notification on the registry keys themselves)
This is reproducible on Windows 7 and Windows 8.1.
Is there any way to arrange for settings to be applied correctly at all times, or is this a bug that will need to be fixed in a future update?We're experiencing the exact same behavior currently. I was starting to think I was going crazy. Glad to know others are experiencing the same behavior.
I've found that using the method from pervious versions to read and update settings from Group Policy, using "emet_conf.exe --refresh" still works, and upon every execution, the event log shows the GPO settings being read and applied. While I welcome the
move to have EMET update from GPO settings without requiring running a separate task, as it stands now in its current condition, it is a step back.
Scott Ladewig http://www.ladewig.com -
Server 2008 R2 does not show Internet Explorer 10/11 Group Policy options
Hello,
I have a Windows Server 2008 R2 server that has IE11 installed. I am attempting to create a GPO to control Proxy settings for IE10/11 clients, however, when I go to User Config>Preferences> Control Panel Settings> Internet Settings and Right click,
I do not see an option for IE10, only IE5 and 6, IE7, and IE8.
I have downloaded and installed the Administrative Templates for Internet Explorer from
here, and followed the installation instructions, but still, the option does not show up. I have ensured that all the latest Windows Updates are installed on the server, and rebooted
the server a couple times.
What am I missing here?
Thanks in advance.<meta content="text/html; charset=UTF-16" http-equiv="Content-Type" /><title>SFDN\testuser</title> <style type="text/css">body { background-color:#FFFFFF; border:1px solid #666666; color:#000000; font-size:68%;
font-family:MS Shell Dlg; margin:0,0,10px,0; word-break:normal; word-wrap:break-word; } table { font-size:100%; table-layout:fixed; width:100%; } td,th { overflow:visible; text-align:left; vertical-align:top; white-space:normal; } .title { background:#FFFFFF;
border:none; color:#333333; display:block; height:24px; margin:0px,0px,-1px,0px; padding-top:4px; ; table-layout:fixed; width:100%; z-index:5; } .he0_expanded { background-color:#FEF7D6; border:1px solid #BBBBBB; color:#3333CC; cursor:hand; display:block;
font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:0px; margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he1_expanded { background-color:#A0BACB; border:1px solid
#BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:20px; margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he1h_expanded
{ background-color: #7197B3; border: 1px solid #BBBBBB; color: #000000; cursor: hand; display: block; font-family: MS Shell Dlg; font-size: 100%; font-weight: bold; height: 2.25em; margin-bottom: -1px; margin-left: 10px; margin-right: 0px; padding-left: 8px;
padding-right: 5em; padding-top: 4px; ; width: 100%; } .he1 { background-color:#A0BACB; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:20px;
margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he2 { background-color:#C0D2DE; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em;
margin-bottom:-1px; margin-left:30px; margin-right:0px; padding-left:8px; padding-right:5em; padding-top:4px; ; width:100%; } .he3 { background-color:#D9E3EA; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%;
font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:40px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ; width:100%; } .he4 { background-color:#E8E8E8; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block;
font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:50px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ; width:100%; } .he4h { background-color:#E8E8E8; border:1px solid #BBBBBB;
color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:55px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ; width:100%; } .he4i { background-color:#F9F9F9;
border:1px solid #BBBBBB; color:#000000; display:block; font-family:MS Shell Dlg; font-size:100%; margin-bottom:-1px; margin-left:55px; margin-right:0px; padding-bottom:5px; padding-left:21px; padding-top:4px; ; width:100%; } .he5 { background-color:#E8E8E8;
border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; height:2.25em; margin-bottom:-1px; margin-left:60px; margin-right:0px; padding-left:11px; padding-right:5em; padding-top:4px; ;
width:100%; } .he5h { background-color:#E8E8E8; border:1px solid #BBBBBB; color:#000000; cursor:hand; display:block; font-family:MS Shell Dlg; font-size:100%; padding-left:11px; padding-right:5em; padding-top:4px; margin-bottom:-1px; margin-left:65px; margin-right:0px;
; width:100%; } .he5i { background-color:#F9F9F9; border:1px solid #BBBBBB; color:#000000; display:block; font-family:MS Shell Dlg; font-size:100%; margin-bottom:-1px; margin-left:65px; margin-right:0px; padding-left:21px; padding-bottom:5px; padding-top:
4px; ; width:100%; } DIV .expando { color:#000000; text-decoration:none; display:block; font-family:MS Shell Dlg; font-size:100%; font-weight:normal; ; right:10px; text-decoration:underline; z-index: 0; } .he0 .expando { font-size:100%; } .info, .info3, .info4,
.disalign { line-height:1.6em; padding:0px,0px,0px,0px; margin:0px,0px,0px,0px; } .disalign TD { padding-bottom:5px; padding-right:10px; } .info TD { padding-right:10px; width:50%; } .info3 TD { padding-right:10px; width:33%; } .info4 TD, .info4 TH { padding-right:10px;
width:25%; } .info TH, .info3 TH, .info4 TH, .disalign TH { border-bottom:1px solid #CCCCCC; padding-right:10px; } .subtable, .subtable3 { border:1px solid #CCCCCC; margin-left:0px; background:#FFFFFF; margin-bottom:10px; } .subtable TD, .subtable3 TD { padding-left:10px;
padding-right:5px; padding-top:3px; padding-bottom:3px; line-height:1.1em; width:10%; } .subtable TH, .subtable3 TH { border-bottom:1px solid #CCCCCC; font-weight:normal; padding-left:10px; line-height:1.6em; } .subtable .footnote { border-top:1px solid #CCCCCC;
} .subtable3 .footnote, .subtable .footnote { border-top:1px solid #CCCCCC; } .subtable_frame { background:#D9E3EA; border:1px solid #CCCCCC; margin-bottom:10px; margin-left:15px; } .subtable_frame TD { line-height:1.1em; padding-bottom:3px; padding-left:10px;
padding-right:15px; padding-top:3px; } .subtable_frame TH { border-bottom:1px solid #CCCCCC; font-weight:normal; padding-left:10px; line-height:1.6em; } .subtableInnerHead { border-bottom:1px solid #CCCCCC; border-top:1px solid #CCCCCC; } .explainlink { color:#000000;
text-decoration:none; cursor:hand; } .explainlink:hover { color:#0000FF; text-decoration:underline; } .spacer { background:transparent; border:1px solid #BBBBBB; color:#FFFFFF; display:block; font-family:MS Shell Dlg; font-size:100%; height:10px; margin-bottom:-1px;
margin-left:43px; margin-right:0px; padding-top: 4px; ; } .filler { background:transparent; border:none; color:#FFFFFF; display:block; font:100% MS Shell Dlg; line-height:8px; margin-bottom:-1px; margin-left:53px; margin-right:0px; padding-top:4px; ; } .container
{ display:block; ; } .rsopheader { background-color:#A0BACB; border-bottom:1px solid black; color:#333333; font-family:MS Shell Dlg; font-size:130%; font-weight:bold; padding-bottom:5px; text-align:center; } .rsopname { color:#333333; font-family:MS Shell
Dlg; font-size:130%; font-weight:bold; padding-left:11px; } .gponame{ color:#333333; font-family:MS Shell Dlg; font-size:130%; font-weight:bold; padding-left:11px; } .gpotype{ color:#333333; font-family:MS Shell Dlg; font-size:100%; font-weight:bold; padding-left:11px;
} #uri { color:#333333; font-family:MS Shell Dlg; font-size:100%; padding-left:11px; } #dtstamp{ color:#333333; font-family:MS Shell Dlg; font-size:100%; padding-left:11px; text-align:left; width:30%; } #objshowhide { color:#000000; cursor:hand; font-family:MS
Shell Dlg; font-size:100%; font-weight:bold; margin-right:0px; padding-right:10px; text-align:right; text-decoration:underline; z-index:2; word-wrap:normal; } #gposummary { display:block; } #gpoinformation { display:block; } @media print { #objshowhide{ display:none;
} body { color:#000000; border:1px solid #000000; } .title { color:#000000; border:1px solid #000000; } .he0_expanded { color:#000000; border:1px solid #000000; } .he1h_expanded { color:#000000; border:1px solid #000000; } .he1_expanded { color:#000000; border:1px
solid #000000; } .he1 { color:#000000; border:1px solid #000000; } .he2 { color:#000000; background:#EEEEEE; border:1px solid #000000; } .he3 { color:#000000; border:1px solid #000000; } .he4 { color:#000000; border:1px solid #000000; } .he4h { color:#000000;
border:1px solid #000000; } .he4i { color:#000000; border:1px solid #000000; } .he5 { color:#000000; border:1px solid #000000; } .he5h { color:#000000; border:1px solid #000000; } .he5i { color:#000000; border:1px solid #000000; } } v\:* {behavior:url(#default#VML);}
</style> <script language="vbscript"> <!-- '================================================================================ ' String "strShowHide(0/1)" ' 0 = Hide all mode. ' 1 = Show all mode. strShowHide = 1 'Localized
strings strShow = "show" strHide = "hide" strShowAll = "show all" strHideAll = "hide all" strShown = "shown" strHidden = "hidden" strExpandoNumPixelsFromEdge = "10px" Function IsSectionHeader(obj)
IsSectionHeader = (obj.className = "he0_expanded") Or (obj.className = "he1h_expanded") Or (obj.className = "he1_expanded") Or (obj.className = "he1") Or (obj.className = "he2") Or (obj.className = "he3")
Or (obj.className = "he4") Or (obj.className = "he4h") Or (obj.className = "he5") Or (obj.className = "he5h") End Function Function IsSectionExpandedByDefault(objHeader) IsSectionExpandedByDefault = (Right(objHeader.className,
Len("_expanded")) = "_expanded") End Function ' strState must be show | hide | toggle Sub SetSectionState(objHeader, strState) ' Get the container object for the section. It's the first one after the header obj. i = objHeader.sourceIndex
Set all = objHeader.parentElement.document.all While (all(i).className <> "container") i = i + 1 Wend Set objContainer = all(i) If strState = "toggle" Then If objContainer.style.display = "none" Then SetSectionState
objHeader, "show" Else SetSectionState objHeader, "hide" End If Else Set objExpando = objHeader.children.item(1) If strState = "show" Then objContainer.style.display = "block" objExpando.innerText = strHide ElseIf strState
= "hide" Then objContainer.style.display = "none" objExpando.innerText = strShow End If End If End Sub Sub ShowSection(objHeader) SetSectionState objHeader, "show" End Sub Sub HideSection(objHeader) SetSectionState objHeader,
"hide" End Sub Sub ToggleSection(objHeader) SetSectionState objHeader, "toggle" End Sub '================================================================================ ' When user clicks anywhere in the document body, determine if user
is clicking ' on a header element. '================================================================================ Function document_onclick() Set strsrc = window.event.srcElement While (strsrc.className = "sectionTitle" Or strsrc.className = "expando"
Or strsrc.className = "vmlimage") Set strsrc = strsrc.parentElement Wend ' Only handle clicks on headers. If Not IsSectionHeader(strsrc) Then Exit Function ToggleSection strsrc window.event.returnValue = False End Function '================================================================================
' link at the top of the page to collapse/expand all collapsable elements '================================================================================ Function objshowhide_onClick() Set objBody = document.body.all Select Case strShowHide Case 0 strShowHide
= 1 objshowhide.innerText = strShowAll For Each obji In objBody If IsSectionHeader(obji) Then HideSection obji End If Next Case 1 strShowHide = 0 objshowhide.innerText = strHideAll For Each obji In objBody If IsSectionHeader(obji) Then ShowSection obji End
If Next End Select End Function '================================================================================ ' onload collapse all except the first two levels of headers (he0, he1) '================================================================================
Function window_onload() ' Only initialize once. The UI may reinsert a report into the webbrowser control, ' firing onLoad multiple times. If UCase(document.documentElement.getAttribute("gpmc_reportInitialized")) <> "TRUE" Then '
Set text direction Call fDetDir(UCase(document.dir)) ' Initialize sections to default expanded/collapsed state. Set objBody = document.body.all For Each obji in objBody If IsSectionHeader(obji) Then If IsSectionExpandedByDefault(obji) Then ShowSection obji
Else HideSection obji End If End If Next objshowhide.innerText = strShowAll document.documentElement.setAttribute "gpmc_reportInitialized", "true" End If End Function '================================================================================
' When direction (LTR/RTL) changes, change adjust for readability '================================================================================ Function document_onPropertyChange() If window.event.propertyName = "dir" Then Call fDetDir(UCase(document.dir))
End If End Function Function fDetDir(strDir) strDir = UCase(strDir) Select Case strDir Case "LTR" Set colRules = document.styleSheets(0).rules For i = 0 To colRules.length -1 Set nug = colRules.item(i) strClass = nug.selectorText If nug.style.textAlign
= "right" Then nug.style.textAlign = "left" End If Select Case strClass Case "DIV .expando" nug.style.Left = "" nug.style.right = strExpandoNumPixelsFromEdge Case "#objshowhide" nug.style.textAlign = "right"
End Select Next Case "RTL" Set colRules = document.styleSheets(0).rules For i = 0 To colRules.length -1 Set nug = colRules.item(i) strClass = nug.selectorText If nug.style.textAlign = "left" Then nug.style.textAlign = "right"
End If Select Case strClass Case "DIV .expando" nug.style.Left = strExpandoNumPixelsFromEdge nug.style.right = "" Case "#objshowhide" nug.style.textAlign = "left" End Select Next End Select End Function '================================================================================
'When printing reports, if a given section is expanded, let's says "shown" (instead of "hide" in the UI). '================================================================================ Function window_onbeforeprint() For Each obji In
document.all If obji.className = "expando" Then If obji.innerText = strHide Then obji.innerText = strShown If obji.innerText = strShow Then obji.innerText = strHidden End If Next End Function '================================================================================
'If a section is collapsed, change to "hidden" in the printout (instead of "show"). '================================================================================ Function window_onafterprint() For Each obji In document.all If obji.className
= "expando" Then If obji.innerText = strShown Then obji.innerText = strHide If obji.innerText = strHidden Then obji.innerText = strShow End If Next End Function '================================================================================ ' Adding
keypress support for accessibility '================================================================================ Function document_onKeyPress() If window.event.keyCode = "32" Or window.event.keyCode = "13" Or window.event.keyCode =
"10" Then 'space bar (32) or carriage return (13) or line feed (10) If window.event.srcElement.className = "expando" Then Call document_onclick() : window.event.returnValue = false If window.event.srcElement.className = "sectionTitle"
Then Call document_onclick() : window.event.returnValue = false If window.event.srcElement.id = "objshowhide" Then Call objshowhide_onClick() : window.event.returnValue = false End If End Function --> </script> <script language="javascript">
<!-- function getExplainWindowTitle() { return document.getElementById("explainText_windowTitle").innerHTML; } function getExplainWindowStyles() { return document.getElementById("explainText_windowStyles").innerHTML; } function getExplainWindowSettingPathLabel()
{ return document.getElementById("explainText_settingPathLabel").innerHTML; } function getExplainWindowExplainTextLabel() { return document.getElementById("explainText_explainTextLabel").innerHTML; } function getExplainWindowPrintButton()
{ return document.getElementById("explainText_printButton").innerHTML; } function getExplainWindowCloseButton() { return document.getElementById("explainText_closeButton").innerHTML; } function getNoExplainTextAvailable() { return document.getElementById("explainText_noExplainTextAvailable").innerHTML;
} function getExplainWindowSupportedLabel() { return document.getElementById("explainText_supportedLabel").innerHTML; } function getNoSupportedTextAvailable() { return document.getElementById("explainText_noSupportedTextAvailable").innerHTML;
} function showExplainText(srcElement) { var strSettingName = srcElement.getAttribute("gpmc_settingName"); var strSettingPath = srcElement.getAttribute("gpmc_settingPath"); var strSettingDescription = srcElement.getAttribute("gpmc_settingDescription");
if (strSettingDescription == "") { strSettingDescription = getNoExplainTextAvailable(); } var strSupported = srcElement.getAttribute("gpmc_supported"); if (strSupported == "") { strSupported = getNoSupportedTextAvailable(); }
var strHtml = "<html>\n"; strHtml += "<head>\n"; strHtml += "<title>" + getExplainWindowTitle() + "</title>\n"; strHtml += "<style type='text/css'>\n" +
getExplainWindowStyles() + "</style>\n"; strHtml += "</head>\n"; strHtml += "<body>\n"; strHtml += "<div class='head'>" + strSettingName +"</div>\n"; strHtml
+= "<div class='path'><b>" + getExplainWindowSettingPathLabel() + "</b><br/>" + strSettingPath +"</div>\n"; strHtml += "<div class='path'><b>" + getExplainWindowSupportedLabel()
+ "</b><br/>" + strSupported +"</div>\n"; strHtml += "<div class='info'>\n"; strHtml += "<div class='hdr'>" + getExplainWindowExplainTextLabel() + "</div>\n";
strHtml += "<div class='bdy'>" + strSettingDescription + "</div>\n"; strHtml += "<div class='btn'>"; strHtml += getExplainWindowPrintButton(); strHtml += getExplainWindowCloseButton();
strHtml += "</div></body></html>"; var strDiagArgs = "height=360px, width=630px, status=no, toolbar=no, scrollbars=yes, resizable=yes "; var expWin = window.open("", "expWin", strDiagArgs); expWin.document.write("");
expWin.document.close(); expWin.document.write(strHtml); expWin.document.close(); expWin.focus(); //cancels navigation for IE. if(navigator.userAgent.indexOf("MSIE") > 0) { window.event.returnValue = false; } return false; } --> </script>
Group Policy Management
body { font-size:68%;font-family:MS Shell Dlg; margin:0px,0px,0px,0px; border: 1px solid #666666; background:#F6F6F6; width:100%; word-break:normal; word-wrap:break-word; } .head { font-weight:bold; font-size:160%; font-family:MS
Shell Dlg; width:100%; color:#6587DC; background:#E3EAF9; border:1px solid #5582D2; padding- height:24px; } .path { margin- margin- margin-bottom:5px;width:100%; } .info { padding-width:100%; } table { font-size:100%; width:100%; border:1px solid #999999;
} th { border-bottom:1px solid #999999; text-align:left; padding- height:24px; } td { background:#FFFFFF; padding- padding-bottom:10px; padding- } .btn { width:100%; text-align:right; margin- } .hdr { font-weight:bold; border:1px solid #999999; text-align:left;
padding- padding- height:24px; margin-bottom:-1px; width:100%; } .bdy { width:100%; height:182px; display:block; background:#FFFFFF; padding- padding-bottom:10px; padding- border:1px solid #999999; } button { width:6.9em; height:2.1em; font-size:100%; font-family:MS
Shell Dlg; margin-right:15px; } @media print { .bdy { display:block; } button { display:none; } .head { color:#000000; background:#FFFFFF; border:1px solid #000000; } }
Setting Path:
Explanation
<button accesskey="P" name="Print" onclick="window.print()">Print</button>
<button accesskey="C" name="Close" onclick="window.close()">Close</button>
No explanation is available for this setting.
Supported On:
Not available
Group Policy Results
SFDN\testuser
Data collected on: 12/14/2014 1:00:12 PM
Summary
Computer Configuration Summary
No data available.
User Configuration Summary
General
User name
SFDN\testuser
Domain
SFD.local
Last time Group Policy was processed
12/14/2014 12:59:22 PM
Group Policy Objects
Applied GPOs
Name
Link Location
Revision
Local Group Policy
Local
AD (1), Sysvol (1)
Default Domain Policy
SFD.local
AD (6), Sysvol (6)
Test
SFD.local/SFD-Restricted-Users
AD (10), Sysvol (10)
Limit Downloads
SFD.local/SFD-Restricted-Users
AD (2), Sysvol (2)
SFD Restricted Users
SFD.local/SFD-Restricted-Users
AD (59), Sysvol (59)
Denied GPOs
Name
Link Location
Reason Denied
None
Security Group Membership when Group Policy was applied
SFDN\Domain Users
Everyone
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
NT AUTHORITY\This Organization
LOCAL
Mandatory Label\Medium Mandatory Level
WMI Filters
Name
Value
Reference GPO(s)
None
Component Status <v:group alt="Warning" class="vmlimage" coordsize="100,100" style="width:15px;height:15px;vertical-align:middle;"><v:shape class="vmlimage" fillcolor="yellow"
strokecolor="yellow" style="width:100;height:100;"><v:path v="m 50,0 l 0,99 99,99 x e"></v:path></v:shape> <v:rect class="vmlimage" fillcolor="black" strokecolor="black" style="width:10;height:35;"></v:rect>
<v:rect class="vmlimage" fillcolor="black" strokecolor="black" style="width:10;height:5;"></v:rect> </v:group>
Component Name
Status
Last Process Time
Group Policy Infrastructure
Success
12/14/2014 12:59:46 PM
Folder Redirection
Failed
12/14/2014 12:59:46 PM
Folder Redirection failed due to the error listed below.
Cannot complete this function.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 12/14/2014 12:59:23 PM and 12/14/2014 12:59:46 PM.
Group Policy Internet Settings
Success
12/14/2014 12:59:46 PM
Registry
Success
12/12/2014 10:28:23 AM
Computer Configuration
No data available.
User Configuration
Policies
Windows Settings
Security Settings
Software Restriction Policies
Winning GPO
SFD Restricted Users
Enforcement
Policy
Setting
Apply software restriction policies to the following
All software files except libraries (such as DLLs)
Apply software restriction policies to the following users
All users
When applying software restriction policies
Ignore certificate rules
Designated File Types
File Extension
File Type
ADE
Microsoft Access Project Extension
ADP
Microsoft Access Project
BAS
BAS File
BAT
Windows Batch File
CHM
Compiled HTML Help file
CMD
Windows Command Script
COM
MS-DOS Application
CPL
Control panel item
CRT
Security Certificate
EXE
Application
HLP
Help file
HTA
HTML Application
INF
Setup Information
INS
INS File
ISP
ISP File
LNK
Shortcut
MDB
Microsoft Access Database
MDE
Microsoft Access MDE Database
MSC
Microsoft Common Console Document
MSI
Windows Installer Package
MSP
Windows Installer Patch
MST
MST File
OCX
ActiveX control
PCD
PCD File
PIF
Shortcut to MS-DOS Program
REG
Registration Entries
SCR
Screen saver
SHS
SHS File
URL
Internet Shortcut
VB
VB File
WSC
Windows Script Component
Trusted Publishers
Trusted publisher management
Allow all administrators and users to manage user's own Trusted Publishers
Certificate verification
None
Software Restriction Policies/Security Levels
Policy
Setting
Winning GPO
Default Security Level
Unrestricted
SFD Restricted Users
Software Restriction Policies/Additional Rules
Path Rules
%HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRoot%
Security Level
Unrestricted
Description
Date last modified
9/30/2011 12:34:27 PM
Winning GPO
SFD Restricted Users
%HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\ProgramFilesDir%
Security Level
Unrestricted
Description
Date last modified
9/30/2011 12:34:27 PM
Winning GPO
SFD Restricted Users
Administrative Templates
Policy definitions (ADMX files) retrieved from the local machine.
Control Panel
Policy
Setting
Winning GPO
Network/Network Connections
Policy
Setting
Winning GPO
This setting determines whether the Properties menu item is enabled, and thus, whether the Local Area Connection Properties dialog box is available to users.
If you enable this setting (and enable the "Enable Network Connections settings for Administrators" setting), the Properties menu items are disabled for all users, and users cannot open the Local Area Connection Properties dialog box.
Important: If the "Enable Network Connections settings for Administrators" is disabled or not configured, this setting will not apply to administrators on post-Windows 2000 computers.
If you disable this setting or do not configure it, a Properties menu item appears when users right-click the icon representing a LAN connection. Also, when users select the connection, Properties is enabled on the File menu.
Note: This setting takes precedence over settings that manipulate the availability of features inside the Local Area Connection Properties dialog box. If this setting is enabled, nothing within the properties dialog box for a LAN connection is available to
users.
Note: Nonadministrators have the right to view the properties dialog box for a connection but not to make changes, regardless of this setting." gpmc_settingname="Prohibit access to properties of a LAN connection" gpmc_settingpath="User Configuration/Administrative
Templates/Network/Network Connections" gpmc_supported="At least Windows 2000 Service Pack 1" href="javascript:void();" onclick="javascript:showExplainText(this); return false;">Prohibit access to properties of a LAN connection
Enabled
SFD Restricted Users
If you enable this setting (and enable the "Enable Network Connections settings for Administrators" setting), the check boxes for enabling and disabling components are disabled. As a result, administrators cannot enable or disable the components that
a connection uses.
Important: If the "Enable Network Connections settings for Administrators" is disabled or not configured, this setting will not apply to administrators on post-Windows 2000 computers.
If you disable this setting or do not configure it, the Properties dialog box for a connection includes a check box beside the name of each component that the connection uses. Selecting the check box enables the component, and clearing the check box disables
the component.
Note: When the "Prohibit access to properties of a LAN connection" setting is enabled, users are blocked from accessing the check boxes for enabling and disabling the components of a LAN connection.
Note: Nonadministrators are already prohibited from enabling or disabling components for a LAN connection, regardless of this setting." gpmc_settingname="Prohibit Enabling/Disabling components of a LAN connection" gpmc_settingpath="User
Configuration/Administrative Templates/Network/Network Connections" gpmc_supported="Microsoft Windows Server 2003, Windows XP, and Windows 2000 Service Pack 1 operating systems only" href="javascript:void();" onclick="javascript:showExplainText(this);
return false;">Prohibit Enabling/Disabling components of a LAN connection
Enabled
SFD Restricted Users
Windows Components/Internet Explorer
Policy
Setting
Winning GPO
If you enable this policy setting, the user will not be able to configure proxy settings.
If you disable or do not configure this policy setting, the user can configure proxy settings." gpmc_settingname="Prevent changing proxy settings" gpmc_settingpath="User Configuration/Administrative Templates/Windows Components/Internet
Explorer" gpmc_supported="At least Internet Explorer 5.0" href="javascript:void();" onclick="javascript:showExplainText(this); return false;">Prevent changing proxy settings
Enabled
SFD Restricted Users
Windows Components/Internet Explorer/Internet Control Panel/Security Page/Internet Zone
Policy
Setting
Winning GPO
Allow file downloads
Disable
Extra Registry Settings
Display names for some settings cannot be found. You might be able to resolve this issue by updating the .ADM files used by Group Policy Management.
Setting
State
Winning GPO
Software\Policies\Microsoft\office\14.0\outlook\ForceOSTPath
P:\My Documents\Outlook Files
SFD Restricted Users
Software\Policies\Microsoft\office\14.0\outlook\ForcePSTPath
P:\My Documents\Outlook Files
SFD Restricted Users
Maybe you are looking for
-
IBook's failt to wake from sleep.
I've had an ongoing issue with two late '05 model iBook G4's that occasionally do not wake from sleep. I've documented that in an earlier post Titled "Topic: Waking from sleep requires Forced Shut Down on two different g4 iBooks," http://discussions.
-
Library cache lock in statspack report
Hi, We have some production issues on my database from long back. So i had taken snapshot and applied in one of analyzer tool. In the TOP 5 Events they mentioned that library cache lock is 94.46 % , i am afraiding by seeing this number. And in there
-
Hello XI Experts, I know that there were lot of blogs about edi scenarios in XI but I'm still a bit confused and I appreciate any help. I need to configure scenario where we receive EDI message VDA 4905 format through ISDN using OFTP protocol. As I
-
Java or operator statement and expressions
So I tried to simplify some code this morning using the java or operator and it doesn't seem to work. It went something like this: if ((time < 4) || (time > 10))} val = aVariable} else val=0; What I end up with is zero until 4 but after 10 the val do
-
Dear all, I am using a MacBook Pro, and have been using this machine for so many months. When I started using it, I formatted it as Case-Sensitive HFS. However, by this time, Case-Sensitive is causing so many of my programs to not work correctly. So,