Local Host Forbidden PHP

Hi,
I have enabled PHP, but removing # from LoadModule php5_module. I have also enabled Web sharing.
When i go on to http://localhost/, i get the normal confirmation page that Apache was installed correctly.
However when i few files in other directories i get.
403 Forbidden, why is this?

I have tried to go on to
http://localhost/
And now this is saying forbidden.

Similar Messages

Local Web Sharing php issue

I am running OS 10.6 on a macbook pro. I host copies of my websites for testing on the laptop, using php5.3.8
Darwin Kernel Version 10.8.0:
My web host runs FreeBSD 6.4 and php 5.3.6
I am having an issue with extra space rendering in pages on the testing server.
Below is a screen shot of a php-generated menu. On the left is the internet version, and on the right is the version as it is rendered on my local machine.
Note the unsightly extra space.
When I look at the source code in BBedit, it shows an odd character at the start of each iteration of the menu. The first three lines are hard-coded, and do not have the character. The subsequent list items are generated by a foreach statement in php, and display the odd character. (BBedit doesn't know what it is: it's not a break or a whitespace character.) Oddly, these characters are not created by a foreach statement within the loop that generates submenus.
Any ideas? I had this issue once before, but it went away. I've just upgraded the php installation on the laptop.

very carefully
you jsut open it in a text editor like TextMate, BBEdit, vi, pico, emacs, etc.. and edit away. Where the file live depends on how you installed php. Its generally in <pre>[path to php]/lib<pre>
if you used one of the entropy binaries that would be:
<pre>/usr/local/php/lib/php.ini</pre>
or
<pre>/usr/local/php5/lib/php.ini</pre>
if you used another package check its documentation. If you compiled from source yourself you should know d**n well where you put it

Setting up local host

I am trying to set up a local host for testing PHP per David Powers book. I am doing something wrong because I keep getting a 404 error. I am probably screwing up the locations of my site folders and/or the url address. Can someone help me out?

The more information you provide the more likely you are to receive a response that will assist you. To avoid volunteer contributors from asking you 20 questions about the steps you've taken so far why not list in detail the steps you've taken to get to the point you're at now? Expect the amount of effort you put into your post to be reciprocated by others who respond. A three sentence post that vaguely describes your symptoms and methods will most likely be replied with the same minimal effort.

Maverick Local Host Not Working Correctly

Hello,
I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
Also
* Web sharing is on
*PHP is enabled
*Mysql is running
Did I mis something?
Thanks JR

Hello,
I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
Also
* Web sharing is on
*PHP is enabled
*Mysql is running
Did I mis something?
Thanks JR

Local host

I am having a tough time getting the local host to work.
I am using dw 8.0
firefox 2.0 is my primary
IE 7.0 is secondary.
everytime I attempt it I get a connect error.
it has
http://localhost/sitename.com/TMP8vew5uykvv.php
the .php name is not correct. it is a different folder name.
I am not sure I have it set up correctly under manage sites.

When you elect to preview using temp files, several things
happen BEFORE DW
hands the file to the browser. DW builds a temporary file in
which -
1. The content of all include files or externally linked
files in included
in the markup.
2. All root relative links are changed to absolute file links
so that they
will work in the page being previewed, for example, this -
<img src="/images/whatever.jpg"...
would be changed to this -
<img src=''file:///c:/.../images/whatever.jpg''...
(where the "..." represents the absolute path to that images
folder on YOUR
hard drive)
3. The filename for the temp file is a temporary filename
That is the file that is given to the browser to preview.
Your problem has nothing to do with those transitions.
What happens when you browse to
http://localhost?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"IowaHusker" <[email protected]> wrote in
message
news:fn25g3$7ep$[email protected]..
> I"ll search some more. I tried earlier with no luck.
>
> thanks
>

Local host give errors 403

I have a local host set up using XAMPP. Until recently this worked fine. Now, when I try to access files using http://local host, I get error 403 Forbidden.
== URL of affected sites ==
http://

iam using xp professional
and firefox 3.6.
i have instled iis
iam gettin problem in getting localhost
iamgetting error
"firefo cannot estblish a connection to the localhost "

Problem with local apache w/php connect to oracle 9i server

Is any way to connect to oracle 9i server listening on default port 1521 at any host using local apache w/php on windows xp...
I've already installed all dlls oci drivers...
but it seems doesn't work...I don't know how to make connection from php to oracle db...
any suggestions and help?
thx in advance
btw I'm using client appliation to connecti witth that oracle db and it work fine..

Lucas Mierzwa what error are you getting when you try to connect. Am using PHP 4.x on w2k and oracle 10g and Appach server and all work fine. I also run mysql and and IIS all on thesame local machine. They are all functioning fine. I can help you if i know what the problem is.

Wordpress on local host?

I have a simple (only 2 posts and no pages) test WP blog installed on a remote web host. I'm trying to work on a copy of it off-line on my localhost. I started by adding a new wordpress to my local host, then copied the wp-include folder from remote host to the new localhost wordpress. Export/Import databse. Start and install WP and follow steps to create config.php file.
All works as should. Blog appears on localhost with the 2 posts and the theme appearance and etc just as it does on remote host.
Problem - When, in the WP dashboard Posts section, I click on "view" post I get page not found error 404. I have been advised that I need to go to Settings>Permalinks and then click save. As soon as I select Settings>Permalinks a .htaccess file is added to the WP on localhost, the dashboard display becomes not correct and if I click save I get server error 500 message. From that point on I cannot access the blog on localhost at all. If I delete the .htaccess file I get back to where everything works except as described at the top of this post.
So I believe I need to configure the .htaccess file and/or possibly some other configuration settings I need to change. I just can't figure out what I need to do to get this working correctly. A link to the .htaccess files is below. One file from original remote host the other created by WP when I go to Settings>Permalinks
http://www.openrangeimaging.com/Test/htacess.jpg
someone suggested to me that I just work on my localhost without the .htaccess file but that doesn't seem right to me and I want to get this sorted out and working 100% correctly.
I know this is not realy a DW question. I have posted on the WP forum but not received any replies. I have gotten al lot of gret help and advice here so I am posting this in hopes someone can help me with this. Any advice on how I might get this resolved will be very much appreciated

Disable permalinks when working locally.
Nancy O.

Cisco ASA 5505 Cannot ping local traffic and local hosts cannot get out

I have, what I believe to be, a simple issue - I must be missing something.
Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209).
There is a PC (10.51.253.210) plugged into e0/1.
I know the PC is configured correctly with Windows firewall tuned off.
The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.
I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue.
Basically, the VPN is up and running but PC 10.51.253.210 cannot get out.
Any ideas? Sanitized Config is below. Thanks !
ASA Version 7.2(4)
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif Inside
security-level 100
ip address 10.51.253.209 255.255.255.248
interface Vlan2
nameif Outside
security-level 0
ip address ***** 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
shutdown
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
ftp mode passive
dns server-group DefaultDNS
domain-name *****
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
pager lines 24
mtu Outside 1500
mtu Inside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Outside
no asdm history enable
arp timeout 14400
global (Outside) 1 interface
nat (Inside) 0 access-list No_NAT
route Outside 0.0.0.0 0.0.0.0 ***** 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
http server enable
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set DPS_Set esp-3des esp-md5-hmac
crypto map DPS_Map 10 match address Outside_VPN
crypto map DPS_Map 10 set peer *****
crypto map DPS_Map 10 set transform-set *****
crypto map DPS_Map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 28800
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 Outside
ssh timeout 60
console timeout 0
management-access Inside
username test password P4ttSyrm33SV8TYp encrypted
tunnel-group ***** type ipsec-l2l
tunnel-group ***** ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
Cryptochecksum:8d0adca63eab6c6c738cc4ab432f609d
: end
1500

Hi Martin,
Which way you are trying. Sending traffic via site to site is not working or traffic which you generate to outside world is not working?
But you say ASA connected interface to PC itself is not pinging that is strange. But try setting up the specific rules for the outgoing connection and check. Instead of not having any ACL.
If it is outside world the you may need to check on the NAT rules which is not correct.
If it is site to site then you may need to check few other things.
Please do rate for the helpful posts.
By
Karthik

How do I change an IP address of SQL Server which is locally hosted and is not on cluster?

Hi All,
How do I change an IP address of SQL Server which is locally hosted and is not on cluster?
I am asking about IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
aa

Full explanation can seen here:
SQL Server: Configure Listening IP, Port, and Named pipe
http://ariely.info/Blog/tabid/83/EntryId/151/SQL-Server-Configure-Listening-IP-Port-and-Named-pipe.aspx
[Personal Site] [Blog] [Facebook]

Is there a way to run using local host ip (127.0.0.1)?

I am trying to get a working system at home. Obviously I cannot use a dialup
dynamic IP address, but is there a way to enable iAS 6.0 SP3 to use the
local host address of 127.0.0.1?
kas.exe complains 'value of admin host in registry is invalid (localhost IP
is not acceptable)'. I am running Windows 2000 and I do have a network card
that I sporadically use to connect a laptop. It appears that with Windows
2000, I can not use my Ethernet cards PI address unless I actually have it
connected to a network.
Any assistance would be appreciated.
Thanks,
Bret Hansen

Yes. Use the loopback adapter.
Bret Hansen wrote:
I am trying to get a working system at home. Obviously I cannot use a dialup
dynamic IP address, but is there a way to enable iAS 6.0 SP3 to use the
local host address of 127.0.0.1?

How to set up a JSP local host server?

I am trying to set up a local host JSP server, do you know any good youtube or tutorials in general that would help me set up a local host JSP server? Or could you post the steps here and your source (if any).
I am looking for something similar to XAMPP as in this youtube tutorial: http://ca.youtube.com/watch?v=KWRB-maTVyM&feature=rec-fresh However, any help would be greatly appreciated.
By the way, I am very new to JSP and was wondering, XAMPP includes Apache, is Apache a JSP server?
-Direction needed.
Edited by: watwatacrazy on Aug 31, 2008 6:51 AM

You need a Java web container to run JSP/Servlets. A commonly used one is Apache Tomcat. It is not the same as Apache HTTP Server which can only serve static files.
You can find Tomcat here: [http://tomcat.apache.org].
How to install/use it, just check the User Guide: [http://tomcat.apache.org/tomcat-6.0-doc/index.html].

Do I need to have my site uploaded to a remote host for embeded formscentral form to work? I am getting a broken section of header with a warning sign on top corner saying "!Local host." Cheers

Hey there all.
I am wondering if there is something wrong with my embedded form or if it is simply because
I have not uploaded my site to remote host yet? I am only getting a broken part of the header with
no actual form, with a warning "!local host" in top left hand corner. If anyone could enlighten
me on this problem it would be greatly appreciated, it is my first time making forms

Cheers, I noticed some browsers were treating the form differently. I am uploading to a test server tomorrow, hopefully all goes well, thanks for your reply

Error on invoking a webservice by giving ip address instead of local host

Hi,
I created a web service through jdeveloper and tried accessing the webservice generated WSDl file by giving ip address of my machine , but it throws me an error stating IE cannot display the web page . The same web service is running fine when giving local host on the Web service URL .
Looking frwd fr sme help
Thanks in advance
Ragaven

Hi,
your WebLogic server is not setup to listen for the IP address. You can change this in the WLS console for the server configuration. Note that when you install WLS and don't define any hostname then it will listen to all addresses (which also is the default for the integrated WLS)
Frank

Event ID 1012 - There was an error while attempting to read the local hosts file

When I start my Computer after it has been turned off overnight (switched off at the Power supply) I get a Blue screen and have to reboot the PC. in the Event log it has this error: Event ID 1012 - DNS client events - There was an error while attempting
to read the local hosts file.
Once the PC has booted evrything is O.K. I can restart the PC with no problems, it only seems to happen if the PC has been switched off for a while.
I am connected to the net via an Netgear dg834v4 Modem/Router
Windows 7 Ultimate
Intel Q8200 CPU
2 x 360 Gb HDD
ATI 4680 !Gb Video Card
Digital HDA X-Mystique 7.1 Sound Card
Aver media 777 TV Tuner card.
Thank you
jeepers01
After further Investigation it seems that this error is Not responsible for my Blue screening......I started my PC after leaving it off all night, and it started normally, but i still have this error in the Event Log - System.....I have searched the Technet
forums (and there is a lot of ID 1012 errors) but non relating to my problem....If anyone knows what is causing this error and how to fix it, i'd be Grateful....although it does not seem to affect the PC in any way that i can see.
thanks
jeepers01

Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
If you are outside the US please see
Microsoft Worldwide Home for regional support phone numbers.
Meantime we can try some available steps as a general troubleshoot.
1. Please remove the antivirus and run the system with a period. If the issue does not occur, mainly focus on antivirus settings and compatibility.
2. Disable Automatic Restart and see detail information on the blue screen.
1).Click Start, in the Start Search box enter sysdm.cpl.
2).Click the tab Advanced. Under Startup and Recovery, click the Settings button.
3). Uncheck “Automatically restart”.
4). On the drop-down menu “Write debugging information”, choose “Small memory dump”.
5). Click OK.
When Blue Screen displays, you may find some useful information.
Arthur Xie - MSFT

Local Host Forbidden PHP

Similar Messages

Maybe you are looking for