How to set up a JSP local host server?

I am trying to set up a local host JSP server, do you know any good youtube or tutorials in general that would help me set up a local host JSP server? Or could you post the steps here and your source (if any).
I am looking for something similar to XAMPP as in this youtube tutorial: http://ca.youtube.com/watch?v=KWRB-maTVyM&feature=rec-fresh However, any help would be greatly appreciated.
By the way, I am very new to JSP and was wondering, XAMPP includes Apache, is Apache a JSP server?
-Direction needed.
Edited by: watwatacrazy on Aug 31, 2008 6:51 AM

You need a Java web container to run JSP/Servlets. A commonly used one is Apache Tomcat. It is not the same as Apache HTTP Server which can only serve static files.
You can find Tomcat here: [http://tomcat.apache.org].
How to install/use it, just check the User Guide: [http://tomcat.apache.org/tomcat-6.0-doc/index.html].

Similar Messages

How to set title of jsp page from resource bundle

hi ,
How to set title of jsp page from resource bundle....

Depends on how you configured and declared the resourcebundle in your JSP. The usual way is just<title>${resourceBundle.messageKey}</title>

How to set up a basic file sharing server for my small architectural business?

I have no idea if I have posted in the correct area as this is my first forum post within the apple support community!
I have been using a 21.5" imac running 10.6.8 for the past 5 years to run my small home based architectural design business. I have been using the internal hard drive & backing up the necessary data to a simple usb external hard drive. I am now looking to firstly purchase a new imac 27" retina and purchase new autocad lt 2015 for mac software. I am looking to have another imac (my old mac) running in conjunction with the new mac. I want both macs to be able to access the same data and am slightly unsure what is the best way to achieve this.....As my old mac is currently only running snow leopard and an old version of autocad for mac 2011 it wont run on any more recent OS. Essentially i believe I have 2 main options with this.... (1) I Accept that I have to purchase 2 no. autocad lt 2015 licences @ a cost of £2300. Or option (2), I only run autocad on the new mac as this will be the primary station and the old mac used for primarily for admin & accounts. I have also recently discovered that it is possible to rent autocad licences for £300p/a which may also be another option (3)!
I previously had a problem where my hard drive failed on my mac & lost all data on the internal hard drive, luckily I had been backing up all data regularly to my external hard drive and now loss occurred! Obviously with any new system I want to ensure that my data is safe!
I currently utilise about 250GB of data for business operations but this will obviously grow with time.
In the future I would like to have the option of potentially being able to access the network data remotely via macbook pro whilst abroad although at this stage this really isnt my primary objective. Although I believe I could achieve this through apple remote desktop.
I suppose I should provide some information with regard to the required speed of the system...I regularly open 50-100 photos at the same time totalling around 250-500MB. I would like the system to be able to handle this fairly easily.
I have been trawling through forums and to be honest they are totally confusing me. I have also spent time on the phone to the apple business team and have also discussed my objectives with a member of the apple team in store.
There have been various options advised to me and I really do not know which is the most appropriate route forward.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!

Hi sblemings,
Welcome to the community.
I think with your scenario you should ask yourself, how complicated do you want the setup to be and how much time would you have to be able to resolve an issue should one occur with this setup.
All the options that have been advised would work but they come with complexity and therefore time.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!
option 1
Would be a way to achieve what you want, it would centralise your files and you would only need to backup your file server (as long as all the files you wanted backed up were on it). This could be achieved either using the client and sharing various folders or using Server which would give you more options than you would possibly need.
option 2
This is exactly like option 1 except that you wouldn't have to administer another mac however you may limit any future growth.
option 3
This option I probably wouldn't pick, you could achieve this with firewire and use a firewire to thunderbolt adapter (saves you having to buy a new iMac)
option 4
This option would, depending on your RAID level, give you disk redundancy but remember you would still need to back this up, as RAID is NOT a backup solution.
I would also ask is there a pressing need to keep the old iMac in service and complicating things by having a server / NAS? Could you not just transfer all your information over to this and continue with the one backup? I would say that doing it this was would be the simplest way of achieving what you want from what I can take from your question.
As for remotely accessing your data, if you have the right hardware the way to achieve this would be to use a VPN and connect back to your data. However a potentially easier way for you ,would be to use a service like logmein or teamviewer to connect back.
Hope this helps, and by all means any questions please ask.
Dan
How to set up a basic file sharing server for my small architectural business?

How to set JavaBean in JSP using JavaScript function

Hello,
When a user clicks on an item, I want to execute a JavaScript function. Within that function, I want to set specific JavaBeans (<jsp:setProperty... />) within my JSP page.
Can anyone tell me how to do this or where I can find examples on how to set JavaBeans in a JSP page using JavaScript?
Thanks.
Pat

try this:
your.jsp
<html>
<SCRIPT>function buttonClick()
{document.compform.submit();}
</SCRIPT>
<body>
<form name=compform method=post action='your.jsp'>
<%
//write your code which you want to execute once the button is submitted
String submit;
submit=request.getParameter("mysubmit");
if ((submit != null) && (! submit.equals("")))
%>
<input type=hidden name=mysubmit value="submit">
<input type=button value=add onclick='buttonClick()'>
</form></body></html>

How to set classloader SearchPolicy to "Local-First"

Hi, I am wondering how to set the classloading search policy of OC4J to "Local-First", so not only for web apps. Basically what I'm trying to achieve is to incorporate both toplink and commons-logging/log4j libraries in my .EAR without having to worry about those libraries being loaded by another (parent) classloader.
Help appreciated.

Oc4j does not support local class first policy at the level of ear. Oc4j support local class first policy at the level of we apps only because it is recommended in the j2ee spec.
Users of this local class first policy is either delighted by its wonderful work or, more often than not in a large project, bitten by its various bad implications, especially when commons-logging is involved. So I would not recommend to use this policy unless other directions have been tried.

How do I set up a custom (local) Sync server for Firefox 4?

I am having difficulty finding a clear set of instructions on how to set up a custom Sync server for Firefox 4. Most of the information that I can find seems outdated (only mentioning Weave and/or previous versions of Firefox).

The URL you are looking for is https://wiki.mozilla.org/Labs/Weave/Sync/1.1/Setup

How we set up multiple websites on OSX Server

BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!

OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John

How to set up Group Policy without any server installed

How to set up Group Policy on Win8 without any server installed?
I have set up 50 users on LAN and want to push softwares via one common point. From google I found to deploy Software using Group Policy. But then Group Policy occurs in Servers and I don't have any server set up.

Hello,
a Domain requires at least one Windows server OS machine which has Active Directory installed.
As previous already mentioned from SenneVL this also requires that computers are added to the domain and that you create user accounts in Active Directory users and computers which stores the account information in the Active directory database.
In your case with single computers each machine has its own database(SAM) which stores passwords etc. this is different in a domain.
Each computer has a local policy which will be overwritten from centrally managed policies from the domain.
"The common point would be my PC (Admin PC) ."
This machine can not be used for your needs with software installation for 50 computers.
"How To Use the Group Policy Editor to Manage Local Computer Policy."
This is about the local machine and you cannot manage them for other computers from your Admin PC.
"DOMAIN part: By default Microsoft takes everyone on Workgroup. Is that not a default DOMAIN? or should I make one lets say "ABC" on every PC ?"
NO, this is NOT a domain.
http://windows.microsoft.com/en-us/windows7/what-is-the-difference-between-a-domain-a-workgroup-and-a-homegroup
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to use Mac Mini as web hosting server?

Hi,
I would like to use my mac mini as a web hosting server.
I have a few domains that I want to host on my mac mini.
How do I configure/setup the mac mini?
Best,
Leo

yes, a little. it's nice for people not used to setting up from source or doing tons of stuff in the command line. it installs like any other mac application & puts a nice control pane in system preferences. plus, you can set up for updates to keep everything current with patches.
I'm not sure how to handle the multiple domains, but whatever you find on apache that covers this should also or mostly apply to you too.

How to set up a FTP and web server and integrate with DMM 5.2

Hi All ...
I need to set up a external server only for content publishing to reduce the overhead of the DMM server .
can anyone guide me on how to set up the external server and intergrate it with the DMM 5.2
Thanks

semuthu,
Notes from the Release Notes:
Compatibility Limitations with Microsoft Internet Information Server (IIS)
DMPs that use firmware release 5.2 are compatible with only one version of Microsoft Internet Information Server.
That supported version is IIS 6.0 for Windows 2003 Enterprise. If you do not have the supported IIS version but
want your DMPs to retrieve assets from a webserver, we recommend that you use Apache instead of IIS.
I would suggest using Apache instead of IIS for the webserver service. IIS can be used as FTP if needed.
There are plenty of Documents on the Web about setting up Apache and FTP for servers.
Using Apache with Microsoft Windows
http://httpd.apache.org/docs/2.0/platform/windows.html
Quick HOWTO : Ch20 : The Apache Web Server
http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch20_:_The_Apache_Web_Server
Once the Webserver is setup and operational. You simply store your media content on the Webserver
and then have your DMS assets in the media library use an external URL address for its location.
If you want to use external server for other features in the DMM, you can can see how to configure
here:
http://www.cisco.com/en/US/partner/docs/video/digital_media_systems/5_x/5_1/dmm/user/guide/dsm+etv.html#wp1073210
Goto the section right below ACNS & WAAS..
If this answers your question, Please take time to mark this
discussion answered & rate the response.
Thank You!
T.

How to configure sync with my local ftp server?

I have used XMarks since now because it hallow me to synchronize my bookmarks with my local server. Now XMarks don't work anymore because it's not more possible to synchronize the passwords.
Any other alternative imposes to use an external server and I don't want to use an external server. My data must remain on my machine it's absolutely excluded that i use an external unknown server for this.
The only solution must be a free solution (a real free solution) and the firefox synchronization seems to me the best/only one.
But I've not found how to configure it to use my own server.
So how to do it, where are the options to the synchronizer to give my own ftp server or whatever other server it needs?

iAS 6.0 sp4 officially does only support iPlanet Directory Server 5.0 sp1 and 4.13.
For more details visit: http://docs.iplanet.com/docs/manuals/ias/60/sp4/ig/prep.htm#42084
I guess, you can specify the directory server during the time of installation.
Thanks,
Rakesh.

How to set up load balancing with overload server on css

can anyone tell me how to set up a load balancing config on css that will enable me to LB proxy caches and when they have too many connections then LB against an overload proxy-cache.
Such that when the normal proxy-cache farm is under the ceiling of max connections then the overload server is not used ?
I don't think redirect or sorry server will do this ?

see the below configuration,any question,just tell me.
service proxy-1
! below is the real ip of server
ip address 10.1.1.1
keepalive type icmp
active
service proxy-2
ip address 10.1.1.2
keepalive type icmp
active
! enter owner config-mode
owner proxy
! define a content rule,match what you want to load balancing
content rule-proxy
! below is virtual ip,it can be another ip segment
vip address 10.1.1.50
add service proxy-1
add service proxy-2
protocol any
advanced-balance sticky-srcip
active

How to set up multiple JVMs on same server

I try to set at least 2 JVMS run on same server (2CPUS) but I do know how to set manual start server. I can't find the startup and stop scrits in oracle_home/apache/apache/bin directory. Who can help me to set this up?

my reply is good haina
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by jianing shu ([email protected]):
I try to set at least 2 JVMS run on same server (2CPUS) but I do know how to set manual start server. I can't find the startup and stop scrits in oracle_home/apache/apache/bin directory. Who can help me to set this up? <HR></BLOCKQUOTE>
null

Help me how to set charset UTF-8 in SQL Server 2000

Hello guys,
Pls anyone help me out from "how to set the charset UTF-8" in SQL Server 2000.
How do i find the default charset in that?

SQL Server 2000 uses UCS-2/UTF-16 encoding.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnsql2k/html/intlfeaturesinsqlserver2000.asp

How to set Data Subsetting Parameters in MOBILE SERVER

Hello.
How can I set data subsetting parameters in Mobile Server with patch 5.0.2.10.0 NLS.
From Mobile Server "Control Center" -> "Applications" it's not appears at left screen the following field:
* Data Subsetting
* Registry
* Access
* Files
The browser appears this error message:
"http://120.0.0.1:2000/webtogo/admin/console/apppropinfo?applicationvp=%2FMyApp"
Have you any idea for this problem?
Thanks All.

Thanks Oliver,
I have to go in control center in "applications tab" then i have the list of application and i edit one of them, on the left clic Data Subsetting it's not appears.
The following it not appears:
* Data Subsetting
* Registry
* Access
* Files
The browser (internet explorer) appears (at buttom on the left browser) this error message:
"error http://127.0.0.1:2000/webtogo/admin/console/apppropinfo?applicationvp=%2FMyApp missing link".
Whereas (Oliver's solution) in Mobile Server "Control Center" -> "Users Tabs"
i have the list of users go and i edit one of them, on the left clic Data Subsetting then clic on the right pan platform and then i see but not parameter are definited.
Help me please.

How to set up a JSP local host server?

Similar Messages

Maybe you are looking for