Locale not supported by C library [solved]

When running a xdialog script, I am getting this error.
Gdk-WARNING **: locale not supported by C library
Example:
#!/bin/sh
Xdialog --title "TEST BOX"
--msgbox "Hi, this is a simple message box. You can use this to
display any message you like. The box will remain until
you press the ENTER key." 10 41
case $? in
0)
echo "OK";;
255)
echo "Box closed.";;
esac

phrakture wrote:The "locale not supported" message means you did not generate the locale info for the locale you're running under.
For my information, where its said to do this? When installing a fresh install and all packages updated, the locale problem is there. Is this a bug or something what everyone supposed to know?
Why the default locale configure is not enough in /etc/rc.conf, why to bother about /etc/locale.gen?
rc.conf wrote:LOCALE="en_US.utf8"
EDIT:
I took a look at /etc/locale.gen. I don't know what to uncomment, its like reading a foreign language.

Similar Messages

[Solved] Gtk-WARNING **: Locale not supported by C library

Hi all,
Since the gnome 3.2 update I have the following error while working on the terminal:
"Gtk-WARNING **: Locale not supported by C library"
I have follow the wiki but nothing change, any idea?
Regards,
Last edited by sweetthdevil (2011-10-07 16:48:52)

fixed - the problem was with the system settings > Region and language
All needed to be set there...

Gtk-WARNING **: Locale not supported by C library.

Hi, I'm pretty new to Linux and I could really use some help on this one! This is my second Arch install. After the first, which I installed to learn about Linux, I figured there'd be more user-friendly and complete distro's (like SUSE, Debian, etc.). I was wrong
Anyway, this is my second install, but ever since I installed it (and X11, ati-fglrx, gnome and gnome-extra) certain apps give my this error when run from a console. All of them start and work perfectly, except one: gnome-keyboard-properties. I fails to run and starts a bug buddy report window, while outputting the following messages on the console:
[***@*** ~]$ gnome-keyboard-properties
(gnome-keyboard-properties:4727): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
(gnome-keyboard-properties:4727): Gdk-WARNING **: locale not supported by C library
(gnome_segv2:4728): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
(gnome_segv2:4728): Gdk-WARNING **: locale not supported by C library
(bug-buddy:4729): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
(bug-buddy:4729): Gdk-WARNING **: locale not supported by C library
** (bug-buddy:4729): WARNING **: Couldn't load icon for Open Folder
Failed to read a valid object file image from memory.
I've generated the en_US.utf8 locale using locale-gen, edited rc.conf accordingly and I used the hwd-generated keyboard entry for xorg.conf that worked on my previous install.
I've been trying things with my xorg.conf. I used to leave XkbLayout and XkbVariant empty, like in the hwd-generated example, but now I'm using this:
Section "InputDevice"
Identifier "Cherry"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" "intl"
EndSection
This has a noticable effect: both ' and " require an extra spacebar hit. Pretty anoying, but this at least shows is had effect on gnome. Also, the Keyboard Indicator Applet shows the layout correctly.
I've tried other things, like uninstalling gnome and gnome-extra using pacman -Rnd as to leave no trace, and reïnstalling it. And I can't find anything on Google...
PS I'm running this on an athlon64 with a radeon x700, ftp-install from a 0.7.2 i686 base CD.

I've done a total reïnstall - again. gnome-keyboard-properties works again! However, I still get these errors when opening Gtk-apps:
(gksu:4669): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
I've left xorg.conf's XkbLayout emply, which defaults to "us". There's a related option called "KEYMAP" in rc.conf, which has "us" as default, too. As I said, gnome-keyboard-properties now works and correctly displays "Generic 105-key.." etc. and "U.S. English".
I think I now have /etc/hosts' loopback correctly setup:
127.0.0.1 localhost.localdomain myhostname
192.168.x.xxx myhostname.localdomain myhostname
I'm really out of ideas here. Does anyone know whether this is normal or harmful?
[[ EDIT ]]
Solved. I actually forgot to generate the locales this time. I don't know what it was last time...
Last edited by ppvg (2007-02-05 21:21:21)

Locale not supported by C library?

Hi,
When trying concky or lxappearance the terminal says:
Gdk-WARNING **: locale not supported by C library
Using the fallback 'C' locale
What have I done wrong or what have I missed?

http://wiki.archlinux.org/index.php/Locale

Gdk-WARNING **: locale not supported by C library

How I can set LC_CTYPE in ArchLinux.
When I try to run apps with. I get warning and not get unicode support.
$ env LC_CTYPE=en_US.UTF-8 some_app
(process:1256): Gdk-WARNING **: locale not supported by C library
(process:1256): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.

phrakture wrote:The "locale not supported" message means you did not generate the locale info for the locale you're running under.
For my information, where its said to do this? When installing a fresh install and all packages updated, the locale problem is there. Is this a bug or something what everyone supposed to know?
Why the default locale configure is not enough in /etc/rc.conf, why to bother about /etc/locale.gen?
rc.conf wrote:LOCALE="en_US.utf8"
EDIT:
I took a look at /etc/locale.gen. I don't know what to uncomment, its like reading a foreign language.

Locale not supported problem

Hi, I´m an Italian Ubuntu user who is trying to feel new experiences with awesome distros
I´ve got a problem when trying to run archibald:
# ./archibald
(gksu:3489): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
I´ve already read other posts that explain how to fix this problem, but it didn´t work for me.
My locale -a output:
# locale -a
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
C
POSIX
en_IE
en_IE.iso88591
en_IE.iso885915@euro
en_IE.utf8
en_IE@euro
en_US
en_US.iso88591
en_US.utf8
it_CH
it_CH.iso88591
it_CH.utf8
it_IT
it_IT.iso88591
it_IT.iso885915@euro
it_IT.utf8
it_IT@euro
italian
As you see, I tried to install all English and all Italian locales, but the error remains
Could someone help me, please?

# locale
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=it_IT@EURO
LC_CTYPE="it_IT@EURO"
LC_NUMERIC="it_IT@EURO"
LC_TIME="it_IT@EURO"
LC_COLLATE=C
LC_MONETARY="it_IT@EURO"
LC_MESSAGES="it_IT@EURO"
LC_PAPER="it_IT@EURO"
LC_NAME="it_IT@EURO"
LC_ADDRESS="it_IT@EURO"
LC_TELEPHONE="it_IT@EURO"
LC_MEASUREMENT="it_IT@EURO"
LC_IDENTIFICATION="it_IT@EURO"
LC_ALL=
Thanks!

Locale not supported

I updated tarantella native client to
version 3.42 for solaris2.8.
Now I get the error message
<Failed to process Tarantella server information>
at login. (version 3.3 works fine)
The command line shows warnings:
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
It seems to be problem with locale settings, already described in a
previous newsgroup posting.
Setting LANG=en_GB (or other values) did not help.
Where I can get correct locale-files?
(Not included in the client distributions)
Thanks a lot,
JU

Please check your Apache Logfile.
The first connect to SGD by NC is to the Web Server. NC requested
serverinfo.html
Try in a Webbrowser:
http://<servername>/tarantella/cgi-bin/ttawebtop.cgi/tarantella/resources/login/sco/tta/boot/serverinfo.html
You will get an empty page. Look into the Source code of this empty page.
It show something like:
<html><head>


<title>Tarantella server information</title>











</html>
This is the information NC needs to connect to your SGDEE Server.
Check you can telnet to ConnectionHost Port AsadPort
TAB
"juschlue" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
Thank you for the solution that helped to solve
the locale problem. Unfortunally there is still
the error
<Failed to process Tarantella server information>
after approx. 20sec during login.
Our previous version 3.20 works correct
with the same server/login/pw.
Is there a way to identify (debug) the problem.
Thank you very much,
Jens-Uwe
Tillmann Basien wrote:
This is my answer to this issue:
http://www.tbsol.de/de/modules/news/article.php?storyid=64
TAB
\"juschlue\" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
I updated tarantella native client to
version 3.42 for solaris2.8.
Now I get the error message
<Failed to process Tarantella server information>
at login. (version 3.3 works fine)
The command line shows warnings:
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
It seems to be problem with locale settings, already described in a
previous newsgroup posting.
Setting LANG=en_GB (or other values) did not help.
Where I can get correct locale-fil
es?
(Not included in the client distributions)
Thanks a lot,
JU

My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?

My iPhone 4 Bluetooth, using ios7, cannot identify any other bluetooth device (even other apple products). Says device not supported. How to solve this problem?

Supported Bluetooth Profiles
It is not supposed to detect other Apple products via Bluetooth.

Locale not supported by Xlib

When I try to run some programs, they warn that the locale is not supported by Xlib. The ones that warn me, can't get correct input from my keyboard, especially characters like é, ã, â, etc.
Here are some outputs:
$ urxvt
urxvt: the locale is not supported by Xlib, continuing without locale support.
$ xterm
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
xterm: Failed to open input method
$ cat /etc/locale.conf
LANG=en_US.utf8
LC_COLLATE=C
$ grep -v '^#' /etc/locale.gen
en_US.UTF-8 UTF-8
$ locale
LANG=en_US.utf8
LC_CTYPE="en_US.utf8"
LC_NUMERIC="en_US.utf8"
LC_TIME="en_US.utf8"
LC_COLLATE=C
LC_MONETARY="en_US.utf8"
LC_MESSAGES="en_US.utf8"
LC_PAPER="en_US.utf8"
LC_NAME="en_US.utf8"
LC_ADDRESS="en_US.utf8"
LC_TELEPHONE="en_US.utf8"
LC_MEASUREMENT="en_US.utf8"
LC_IDENTIFICATION="en_US.utf8"
LC_ALL=
$ locale -a
C
POSIX
en_US.utf8

$ cat /etc/locale.conf
LANG=en_US.utf8
LC_COLLATE=C
You forgot the dash. Caps might matter as well. I have:
$ cat /etc/locale.conf
LANG=en_US.UTF-8
You could also try running "locale-gen" as root and here's a wiki article about how to correctly set this all up:
https://wiki.archlinux.org/index.php/Be … ide#Locale
Last edited by weirddan455 (2013-05-17 04:21:38)

Is XIB not supported in static library (for creating Native Extension)?

Hello,
These day I'm trying to build a static library in XCode to build a Native Extension. The original project from which I'm creating a static library is runs well on device. But when I creates a static library project along with one XIB file within, and port it to the Adobe AIR, the expected XIB view never opens up.
Somewhere some gentleman mentioned that static library can not include XIB, graphics file etc. Is that true (http://stackoverflow.com/questions/2797214/trouble-using-xib-files-in-libraries)? Can't I bundle an ANE with XIB support?
Thanks.
Santanu

Also want to know this Current project may require loading xib over Adobe Air. I suggest to start from here http://stackoverflow.com/questions/7814928/how-to-load-a-xib-file-in-a-uiview and this http://forums.adobe.com/message/4621408
Let me know if this works and would be gr8 if you can share your solution as opensource

Utf8 locale not supported

How do you add utf8 support to the system for Xwindow applications?

It's probably best to ask stuff like this in the technologies forum:
https://discussions.apple.com/community/mac_os/mac_os_x_technologies

X does not support locale

Hellow, i setup SGD 4.2, but when i start an application or object manager via ttwebtop locally on the server. I get this error messages everytime after starting:
/opt/tarantella/bin/ttwebtop -url http://localhost/tarantella.
bash-2.05# /opt/tarantella/bin/ttwebtop
X does not support locale
Cannot set input modifiers
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontSet
Warning: Unable to load any usable fontset
Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontList
Warning: Cannot convert string "-dt-interface system-medium-r-normal-m*-*-*-*-*-*-*-*-*:" to type FontList
Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontSet
Warning: Unable to load any usable fontset
Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*" to type FontList
Warning: Cannot convert string "-dt-interface user-medium-r-normal-m*-*-*-*-*-*-*-*-*:" to type FontList
bash-2.05#
Can anyone help me.
Extra input:
Solaris 9/05 SPARC
THX

Did you ever get this working?

SL500 " this program does not support this system"

I've an SL500 with windows 7 64bit system. It has a fresh system installed. I've installed all the necessary drivers correctly.Now I'm not able to install the followind items with system update utility:
Thinkpad ultranav driver for windows 7
Thinkpad hotkey features integration driver
Thinkpad Ultranav utility
If I try to install manually I receive an error message " this program does not support this system".
Solved!
Go to Solution.

I had the same problem with Thinkpad hotkey features integration driver Version 3.84.1500
(and the latest version 3.84.2000)
It is a faulty installation!
2 Files missing.
Solution until Lenovo fixes the installation:
Download and extract latest version.
Download and extract version 3.81.0100.
Copy the files SWI32.sys and SWIX64.sys from version 3.81.0100 to the corresponding folder of the latest version.
Start setup.exe of latest version.
According to the file properties SWI32.sys and SWIX64.sys are used as 'System Information Detector'.
No wonder we get the error message 'this program does not support this system'
Lenovo, please fix it.

IPod Classic 160GB film library sync problem - trying to sync films that have converted from purchased DVD to mp4 format locally, not purchases from the online store - all other libraries sync perfect - why?

Hello Apple and the iTunes Windows PC users community.
I am trying to sync films that I have converted from purchased DVD to mp4 format locally, not purchases from the online store. The mp4s all appear and play successfully in my iTunes application but will not sync across to the iPod film library folder.
For your information: I am using iTunes 11.1.3.8 on a Windows 7 64bit machine with 500GB hard disk and 8GB of Ram in the UK.
I have restored the iPod classic 160GB three times now to see if it was a hardware problem with no joy. Each time all the music restores properly as do the podcasts and all the items in TV programmes all appear to sync and work fine.
I have also tried to copy films into the TV Programmes to get around it with no joy. They always go to the films section to start with. It is just the Films library that does not sync - all others work perfectly. As a last resort I have uninstalled and re-installed iTunes with no joy either.
I am technically savvy and have gone through the itunes and ipod settings but nothing appears to make a difference - This is the first time I have had to post here as I can usually solve the majority of the ipod anomilies but this one has me flummoxed.
Has the film encoding type changed in the newest itunes update? - Has this happened to anybody else and is it a hardware, software, or operating system problem.

Having uninstalled the current version 11.1.3.8 and loaded and older version of iTunes 10.7.0.21 I can now categorically confirm that the newest update seems to be causing the problem as the films and TV Programmes are syncing perfectly on this older version.
If you are going to do this please dont forget to remove the ' iTunes Library.itl' file as this stops the older versions from running as I've just found out

Trying to open a sharepoint library in Windows Explorer via IE 8 results in the error "your client does not support opening this list with windows explorer"

I am attempting to connect to a Microsoft Sharepoint library, via the "Actions -> Open in Windows Explorer" option from the Sharepoint page. When I do so, I get the error message "your client does not support opening this list with windows explorer". In short, I am trying to get the "drag and drop" functionality of a Sharepoint library.
I am running Windows 7 64-bit and IE8. The target Sharepoint environment is a MOSS 2007 EE. My Windows "WebClient" service is running, and I have no problem connecting to this exact library via a Windows XP computer running IE8.

Verify that the Webclient is started automatically from the Services.msc
Verify that your Portal is in the Intranet local security zone (You can reach it from Your Internet Explorer Browser Security Tag) if not add it to the list
restart the WebClient service if it's work good
If not you have to create a network share to your portal URL directly not your documents library.
Open Windows Explorer or My Computer from the Windows Start Menu.
From the Tools menu, click Map Network Drive…. A new Map Network Drive window opens.
In the Map Network Drive window, choose an available drive letter from the dropdown list located next to the "Drive:" option. Any drives already mapped will have a shared folder name displayed inside the dropdown list, next to the drive letter.
Type the name of the folder to map wich is in this case your SharePoint Portal URL (Don't include the documents libraries)
Click the "Reconnect at login" checkbox if this network drive should be mapped permanently. Otherwise, this drive will un-map when the user logs out of this computer.
If the remote computer that contains the shared folder requires a different username and password to log in, click the "different user name" hyperlink to enter this information.
Click Finish.
I am looking for a suite method :)

Locale not supported by C library [solved]

Similar Messages

Maybe you are looking for