Locking a particular row in a table control

Hi All,
I have module pool program in which table control is used. I would like to know whether it is possible to lock a particular row in the table so that another person will not be able to edit it until the first user completes his work. It should be only for that particular record which is being currently edited in the table.

Hi,
Yes you can lock particular row in a table control..
In the flow logic..
PROCESS BEFORE OUTPUT.
LOOP AT itab INTO wa WITH CONTROL tc.
     MODULE disable_row.
ENDLOOP.
MODULE disable_row.
* call the Enqueue function module..If the
    IF sy-subrc NE 0.
      LOOP AT screen.
           SCREEN-INPUT = 0.    " Disable for input
           MODIFY SCREEN.
      ENDLOOP.
   ENDIF.
ENDMODULE.
Thanks
Naren

Similar Messages

How to display particular ROW of a table control in display/change mode

Hi,
Can we make particular ROW in a table control display mode or editable mode depending upon the conditions?.
Any inputs..
Rgds,
Lakshmiraj

Hi,
Yes it is possible. check the follwoing code for help.
*& Include           Z101954_ASSIGNMENT1I01
*&      Module VALIDATE_SALES_ORG INPUT
      text
MODULE validate_sales_org INPUT.
SELECT SINGLE zvkorg FROM vbak INTO zvbak-zvkorg
*WHERE zvbeln = zbookhdr-zvbeln.
IF sy-subrc <> 0.
   MESSAGE 'INVALID AIRLINE ID INPUT' TYPE 'I'.
   CALL SCREEN 1000.
ENDIF.
ENDMODULE.                 " VALIDATE_SALES_ORG INPUT
*&      Module USER_COMMAND_1001 INPUT
      text
MODULE user_command_1001 INPUT.
var3 = 1.
IF sy-ucomm <> 'SAVE'.
    PERFORM material_check.
    IF sy-subrc <> 0.
      MESSAGE 'ENTER THE CORRECT MATERIAL NUMBER' TYPE 'I'.
    ELSE.
      SELECT SINGLE zmaktx zmeins zwaerk zstprs FROM zmara
        INTO CORRESPONDING FIELDS OF it_salesitems
         WHERE zmatnr = it_salesitems-zmatnr.
      SELECT SINGLE zwerks zlgort FROM zorg
        INTO CORRESPONDING FIELDS OF it_salesitems
        WHERE zvkorg = wa_salesorder-zvkorg
         AND zvtweg = wa_salesorder-zvtweg
         AND zspart = wa_salesorder-zspart.
      it_salesitems-znetwr = it_salesitems-zstprs * it_salesitems-zbrgew.
     MODIFY it_salesitems FROM it_salesitems INDEX sy-tabix.
      MOVE-CORRESPONDING it_salesitems TO temp_salesitems.
      APPEND temp_salesitems.
      REFRESH it_salesitems.
    ENDIF.
ENDIF.
LOOP AT temp_salesitems.
if it_salesitems-pick = 'X'.
           LOOP AT SCREEN.
         IF screen-name EQ 'DETAIL'.
           screen-input = 1.
           MODIFY SCREEN.
         ENDIF.
       ENDLOOP.
       endif.
       endloop.
CASE sy-ucomm.
    WHEN 'SAVE'.
      PERFORM check_ship_to_party.
      IF sy-subrc <> 0.
        MESSAGE 'ENTER THE CORRECT SHIP TO PARTY ' TYPE 'I'.
      ELSE.
        PERFORM check_payer.
        IF sy-subrc <> 0.
          MESSAGE 'ENTER THE CORRECT PAYER' TYPE 'I'.
        ELSE.
          PERFORM check_bill_to_party.
          IF sy-subrc <> 0.
            MESSAGE 'ENTER THE CORRECT BILL TO PARTY' TYPE 'I'.
          ELSE.
            wa_salesorder-zernam = sy-uname.
            MOVE-CORRESPONDING wa_salesorder TO zvbak.
            MODIFY zvbak.
            LOOP AT it_salesitems.
              it_salesitems-zvbeln = wa_salesorder-zvbeln.
              MOVE-CORRESPONDING it_salesitems TO zvbap.
              MODIFY zvbap.
            ENDLOOP.
            IF sy-subrc = 0.
              MESSAGE 'THE DATA IS SAVED SUCCESSFULLY' TYPE 'I'.
              CLEAR wa_salesorder.
              REFRESH it_salesitems.
              REFRESH temp_salesitems.
              IF sy-tcode = 'ZVA01'.
                CALL SCREEN '1000'.
              ELSE.
                CALL SCREEN '1003'.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    WHEN 'DETAIL'.
      CALL SCREEN '1002'.
    WHEN 'BACK'.
      IF sy-tcode = 'ZVA03'.
        CLEAR wa_salesorder.
        CALL SCREEN '1003'.
      ELSE.
        PERFORM pop_up.
      ENDIF.
    WHEN 'EXIT'.
      IF sy-tcode = 'ZVA03'.
        LEAVE PROGRAM.
      ELSE.
        PERFORM pop_up.
      ENDIF.
    WHEN 'CANCEL'.
      IF sy-tcode = 'ZVA03'.
        CLEAR wa_salesorder.
        CALL SCREEN '1003'.
      ELSE.
        PERFORM pop_up.
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_1001 INPUT
*&      Module input_help_sold_to_party INPUT
      text
MODULE input_help_sold_to_party INPUT.
SELECT zkunag FROM zvbak INTO CORRESPONDING FIELDS OF TABLE
    itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      retfield               = 'ZKUNAG'
PVALKEY                = ' '
     dynpprog               = sy-cprog
     dynpnr                 = '1000'
     dynprofield            = 'ZKUNAG'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     value_org              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      value_tab              = itab
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " input_help_sold_to_party INPUT
*&      Form pop_up
      text
--> p1        text
<-- p2        text
FORM pop_up .
CALL FUNCTION 'POPUP_TO_CONFIRM'
    EXPORTING
TITLEBAR                    = ' '
DIAGNOSE_OBJECT             = ' '
      text_question               = 'DO YOU WANT TO SAVE THE ORDER?'
     text_button_1               = 'YES'(001)
     icon_button_1               = ' '
     text_button_2               = 'No'(002)
     icon_button_2               = ' '
     default_button              = '1'
     display_cancel_button       = 'X'
     userdefined_f1_help         = ' '
START_COLUMN                = 25
START_ROW                   = 6
POPUP_TYPE                  =
IV_QUICKINFO_BUTTON_1       = ' '
IV_QUICKINFO_BUTTON_2       = ' '
IMPORTING
     answer                      = ans
TABLES
PARAMETER                   =
EXCEPTIONS
TEXT_NOT_FOUND              = 1
OTHERS                      = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CASE ans.
    WHEN '001'.
      PERFORM check_ship_to_party.
      IF sy-subrc <> 0.
        MESSAGE 'ENTER THE CORRECT SHIP TO PARTY ' TYPE 'I'.
      ELSE.
        PERFORM check_payer.
        IF sy-subrc <> 0.
          MESSAGE 'ENTER THE CORRECT PAYER' TYPE 'I'.
        ELSE.
          PERFORM check_bill_to_party.
          IF sy-subrc <> 0.
            MESSAGE 'ENTER THE CORRECT BILL TO PARTY' TYPE 'I'.
          ELSE.
            wa_salesorder-zernam = sy-uname.
            MOVE-CORRESPONDING wa_salesorder TO zvbak.
            MODIFY zvbak_101954.
            temp_salesitems-zvbeln = wa_salesorder-zvbeln.
            MOVE-CORRESPONDING temp_salesitems TO zvbap.
            MODIFY zvbap.
            IF sy-subrc = 0.
              MESSAGE 'THE DATA IS SAVED SUCCESSFULLY' TYPE 'I'.
              CLEAR wa_salesorder.
              REFRESH it_salesitems.
              REFRESH temp_salesitems.
              IF sy-ucomm = 'EXIT'.
                LEAVE PROGRAM.
              ENDIF.
              IF sy-tcode = 'ZVA01'.
                CALL SCREEN '1000'.
              ELSE.
                CALL SCREEN '1003'.
              ENDIF.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    WHEN '002'.
      IF sy-tcode = 'ZVA01'.
        CLEAR wa_salesorder.
        REFRESH it_salesitems.
        REFRESH temp_salesitems.
        CALL SCREEN '1000'.
      ELSE.
        CLEAR wa_salesorder.
        REFRESH it_salesitems.
        REFRESH temp_salesitems.
        CALL SCREEN '1003'.
        CLEAR ans.
      ENDIF.
ENDCASE.
ENDFORM.                    " pop_up
*&      Module USER_COMMAND_1002 INPUT
      text
MODULE user_command_1002 INPUT.
IF sy-datar = 'X'.
   PERFORM material_check.
   IF sy-subrc <> 0.
     MESSAGE 'ENTER THE CORRECT MATERIAL' TYPE 'I'.
   ELSE.
     SELECT SINGLE zmaktx zmeins zwaerk zstprs FROM zmara_101954
     INTO CORRESPONDING FIELDS OF wa_salesitems
       WHERE zmatnr = wa_salesitems-zmatnr.
     wa_salesitems-znetwr = wa_salesitems-zstprs * wa_salesitems-zbrgew.
   ENDIF.
   var = 1.
ENDIF.
IF sy-ucomm = 'BACK'.
    LOOP AT temp_salesitems.
      MODIFY temp_salesitems FROM wa_salesitems .
    ENDLOOP.
    it_salesitems-pick = ' '.
    CALL SCREEN '1001'.
ENDIF.
ENDMODULE.                 " USER_COMMAND_1002 INPUT
*&      Module USER_COMMAND_1000 INPUT
      text
MODULE user_command_1000 INPUT.
CASE sy-ucomm.
    WHEN 'NEXT'.
      SELECT * FROM zt001k_101954 INTO CORRESPONDING FIELDS OF
        temp_salesorder WHERE
        zvkorg = wa_salesorder-zvkorg AND
        zvtweg = wa_salesorder-zvtweg AND
        zspart = wa_salesorder-zspart.
      ENDSELECT.
      IF sy-subrc = 0.
        CALL SCREEN '1001'.
      ELSE.
        MESSAGE 'Invalid Data Entered' TYPE 'I'.
        CALL SCREEN '1000'.
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_1000 INPUT
*&      Module USER_COMMAND_1003 INPUT
      text
MODULE user_command_1003 INPUT.
IF sy-ucomm = 'NEXT'.
   IF sy-datar = ' '.
     MESSAGE 'ENTER PURCHASE ORDER NUMBER' TYPE 'I'.
     CALL SCREEN 1000.
    IF NOT wa_salesorder-zvbeln CO '0123456789'.
      MESSAGE 'PURCHASE ORDER NUMBER IS NOT IN THE EXPECTED FORMAT' TYPE 'I'.
      CALL SCREEN '1003'.
    ENDIF.
    var3 = 0.
    CALL SCREEN '1001'.
ENDIF.
ENDMODULE.                 " USER_COMMAND_1003 INPUT
*&      Module input_help_sales_order INPUT
      text
MODULE input_help_sales_order INPUT.
SELECT zvbeln FROM zvbak_101954 INTO CORRESPONDING FIELDS OF TABLE
itab1.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      retfield               = 'ZVBELN'
PVALKEY                = ' '
     dynpprog               = sy-cprog
     dynpnr                 = '1003'
     dynprofield            = 'ZVBELN'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     value_org              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      value_tab              = itab1
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " input_help_sales_order INPUT
*&      Module back_command INPUT
      text
module back_command input.
*if sy-ucomm = 'SAVE' OR 'BACK' OR 'DETAIL' OR 'EXIT' OR 'CANCEL'.
*endif.
endmodule.                 " back_command INPUT
Regards
Rajesh Kumar

How to edit a particular row in the table ctrl when a push button is clickd

Hi Experts,
How to edit a particular row (except the Primary keys) after selecting it in the TABLE CONTROL when a
push button is clicked in the table control.
For Eg. If you have a push button say "Modify", the particular row what we select in the table control should be in a
editable mode after clicking "Modify" Push button.
Please help me out.
Thanks in advance.

Hey Ram,
Thanks a ton.
Its working fine...sorry for the late reply.
The reason behind the delay is because i had modified my code as per your logic it worked fine but the thing is that the whole column was in editable mode but not a single row.
For E.g If i want to edit a particular row, first i select the row and then click on "Modify" button. After i click on the button, the whole column gets in a editable mode including the one which i intentionally selected.
Here, the solution is that you have to set a flag in PBO so that once it is done with PBO then it need not come back again after we click on "Modify" button.
And one more query is that after you modify a particular row in the table control ( When it is in editable mode) and click on the "Save" button, it is not getting updated to database.
To update the database, we need to select the row once again after modifying it and click on the "Save" button.
Here, database is updating only when it is selected again. If it is not selected, it is not getting updated.
If you have any alternative solution, then please help me out.( I hope i am clear with the question.)
Thanks,
Ananth.

Highlighting one row in a table control

Hi All,
Can i highlight one row in a table control. I found some stroke color in the properties for a field in table control. But i am not sure, will it be applied to the entire column or to a particular field.
Anybody aware of this.?
Regards,
Manjunatha.T.S

Hi,
This is not currently available in VC.
Lior

How to set fire action event for particular rows in a table

HI All,
I have a requirement in which I want to set fire action event for particular rows in a table based on some condition.
The table has columns like fullname,employee id etc.
So i want to set fire action event for particulars rows only which will saisfy some condition.

Atanu,
Your approach(setting fire action for few rows) seems not possible. Better to go ahead with workaround.
Do you want this functionality in processRequest(while page loading) or processFromRequest(on some event) method ? Give more explanation regd. your requirement ?
In either case loop through the rows and when your condition is met write the action to be performed in controller.
Regards,
Anand

How to delete a particular row in ALV table

Hi,
How to delete a particular row in ALV table based on some condition(by checking value for one of the columns in a row)
Thanks
Bala Duvvuri

Hello Bala,
Can you please be a bit more clear as to how you intend to delete the rows from your ALV? By the way deleting rows from an ALV is no different from deleting rows from a normal table. Suppose you have enabled selection property in ALV & then select multiple rows and click up on a button to delete the rows then below would be the coding: (Also keep in mind that you would have to maintain the Selection property of the context node that you are binding to your ALV to 0..n)
data : lr_table_settings TYPE REF TO if_salv_wd_table_settings,
             lr_config          TYPE REF TO cl_salv_wd_config_table.
lr_table_settings ?= lr_config.
** Setting the ALV selection to multiple selection with no lead selection
lr_table_settings->set_selection_mode( value = cl_wd_table=>e_selection_mode-multi_no_lead ).
Next delete the selected rows in the action triggered by the button:
METHOD onactiondelete_rows .
DATA: wd_node TYPE REF TO if_wd_context_node,
         lt_node1 TYPE ig_componentcontroller=>elements_node,
         wa_temp TYPE REF TO if_wd_context_element,
         lt_temp TYPE wdr_context_element_set,
         row_number TYPE i VALUE 0.
wd_node = wd_context->get_child_node( name = 'NODE' ).
CALL METHOD wd_node->get_selected_elements
    RECEIVING
      set = lt_temp.
LOOP AT lt_temp INTO wa_temp.
    wd_node->remove_element( EXPORTING element = wa_temp ).
ENDLOOP.
CALL METHOD wd_node->get_static_attributes_table
    EXPORTING
      from = 1
      to    = 2147483647
    IMPORTING
      table = lt_node1.
wd_node->bind_table( new_items = lt_node1 ).
ENDMETHOD.
If in case this isn't your requirement please do let me know so that I can try come up with another analysis.
Regards,
Uday

Insert row and delete row in a table control

Hi Experts,
I am using a table control in module pool programming, How can I Insert row and delete row in a table control?
Thanks in Advance....

Santhosh,
Iam using this code..
FORM fcode_delete_row
              USING    p_tc_name           TYPE dynfnam
                       p_table_name
                       p_mark_name   .
-BEGIN OF LOCAL DATA----
DATA l_table_name       LIKE feld-name.
data: p_mark_name type c.
FIELD-SYMBOLS <tc>         TYPE cxtab_control.
FIELD-SYMBOLS <table>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <wa>.
FIELD-SYMBOLS <mark_field>.
-END OF LOCAL DATA----
ASSIGN (p_tc_name) TO <tc>.
get the table, which belongs to the tc                               *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>.                "not headerline
delete marked lines                                                  *
DESCRIBE TABLE <table> LINES <tc>-lines.
LOOP AT <table> ASSIGNING <wa>.
access to the component 'FLAG' of the table header                 *
    ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
if <MARK_FIELD> = 'X'.
    PERFORM f_save_confirmation_9101.
    IF gv_answer EQ '1'.
      DELETE <table> INDEX syst-tabix.
      IF sy-subrc = 0.
        <tc>-lines = <tc>-lines - 1.
      ENDIF.
      ELSE.
      ENDIF.
    ENDIF.
ENDLOOP.
in this code   ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
if <MARK_FIELD> = 'X'.
this code is not working...

Get the count of rows in a table control

Hi Experts,
How do I get the count of the rows in a table control during run time.
I am developing a BDC in which I have to check all entries in a table control.
My requirement is to get the total number of rows in a table control dynamically.
Thanks
Kumar

Hi,
Use a variable when u r passing the records from the internal table to the screen fields
and display the same.
I think this idea may help u.
And pls explain me ur requirement clearly.
Refer to the following link this may help u.
http://sapabapnotes.blogspot.com/2008/03/working-with-ecatt-extended-computer.html
Reward if helpful.
Jagadish

Changing number of rows oin a table control dynamically

Hi all
Is there a way to change the no of rows dynamically.
I have a requirement that at run time , depending on a condition, I have to change the no of rows in the table control to 1 row.
Is this possible to do?If else How?
Thanks.

You can redefine table control attributes eachtime PBO is called, because those attributes are dynamic. So although you defined tc-lines as 1 in first PBO execution, you can redefine to 2 if some condition is achieved,
One idea could be to create a global var, called tc_lines which is initialized as 1. In your PBO you shoud use: <tc>-lines = tc_lines.
In PAI, when you obtain your condition, you shoud here add or subract one from this global variable.
Regards,
Valter Oliveira.

How to increase row height in table control?

Hi experts,
We have a push button in table control created using screen painter. Since this is a touch screen transaction, the default height is very small for the worker in the plant to click on a specific row, i would like to know if there is any way to increase the row height in the table control. There is no attribute in Screen painter for increasing row height in table control. I did try "import dynpro", hoping to increase the row height and export the dynpro, but that doesn't seem to have row height attributes. Any help in this regard is highly appreciated. Thanks,
Raj

Using a new technology means you have to recreate your screen: you may create an HTML using CL_DD_* classes (that's called "Dynamic Documents"). See [SAP Library - DD programming guide|http://help.sap.com/saphelp_nw2004s/helpdata/en/13/12284b019511d4a73e0000e83dd863/frameset.htm]. Demos are provided in SDYNAMICDOCUMENTS package. Or I think you may create web dynpro and define a CSS style to enlarge objects.
If you don't want to create everything, maybe you can find out a workaround with GuiXT, for example creating a big button in each row (for example, with BUTTONSIZE, but don't know if it changes the height of rows but that's worth trying).
Well, [Synactive documentation about table controls|http://www.synactive.com/docu_e/specials/tables.html] does not seem to allow that.
Maybe you can move your question to the "scripting" forum and ask about how to do it with GuiXT...

Changing height of a row in a table control

Hi all,
I have developed a webdynpro application in which i am using a table control in the view. Can anyone tell me how can i change the height of a row in the table control?
thanx in advance
anuradha

hi anuradha,
you can set the number of the rows to be displayed, in the table controller properties, so that those many rows will be disaplayed at a time.
to do this.
Go to table controller properties,
mention the integer( number of rows to be displayed ) value in the <b>visiblerowcount</b> property.
if your requirement is not this then let me know.
bye.
Brahmanandam.

Insert row in a table control

Hi,
I have a requirement to insert a new row and delete an existing row from a table control.
Please help me how to proceed with this.
Thanks in advance.
Suresh

Hi,
Sorry for wrongly framed question.
The question is
I have a requirement to insert a new <b>column</b> and delete an existing <b>column</b> from a table control.
Thanks,
Suresh

What is the maximum number of row for a table control in LabWindows/CVI ?

I use LabWindows CVI 8.5.1 (MMI first developped in version 6.0).
In one of our many MMI, a table control contains a list of aircraft parameters.
We can add as many parameters (row) as we want but over 40 000 we observe a crash of the LabWindows CVI runtime.
Our client want to inscrease the number of parameters (row) up to 200 000 !!!
So my questions are:
What is the real maximum number of row for the table control ?
Is this maximum number of row different on LabWindows 2010 version ?
Or is there an other solution ?
Thanks

Greetings,
Can you clarify what you mean by "crash"? Is there an error message thrown? Is it possible that you've consumed all of the available memory?
Please let me know.
Thanks, James Duvall
Product Support Engineer
National Instruments

How to find out which user has locked a particular record of a table

Hi
Is it possible to know - which user has locked a particular record (I know the primary key of the record) of a table
Regards

select     OS_USER_NAME os_user,
     PROCESS os_pid,
     ORACLE_USERNAME oracle_user,
     l.SID oracle_id,
     decode(TYPE,
          'MR', 'Media Recovery',
          'RT', 'Redo Thread',
          'UN', 'User Name',
          'TX', 'Transaction',
          'TM', 'DML',
          'UL', 'PL/SQL User Lock',
          'DX', 'Distributed Xaction',
          'CF', 'Control File',
          'IS', 'Instance State',
          'FS', 'File Set',
          'IR', 'Instance Recovery',
          'ST', 'Disk Space Transaction',
          'TS', 'Temp Segment',
          'IV', 'Library Cache Invalidation',
          'LS', 'Log Start or Switch',
          'RW', 'Row Wait',
          'SQ', 'Sequence Number',
          'TE', 'Extend Table',
          'TT', 'Temp Table', type) lock_type,
     decode(LMODE,
          0, 'None',
          1, 'Null',
          2, 'Row-S (SS)',
          3, 'Row-X (SX)',
          4, 'Share',
          5, 'S/Row-X (SSX)',
          6, 'Exclusive', lmode) lock_held,
     decode(REQUEST,
          0, 'None',
          1, 'Null',
          2, 'Row-S (SS)',
          3, 'Row-X (SX)',
          4, 'Share',
          5, 'S/Row-X (SSX)',
          6, 'Exclusive', request) lock_requested,
     decode(BLOCK,
          0, 'Not Blocking',
          1, 'Blocking',
          2, 'Global', block) status,
     OWNER,
     OBJECT_NAME
from     v$locked_object lo,
     dba_objects do,
     v$lock l
where      lo.OBJECT_ID = do.OBJECT_ID
AND l.SID = lo.SESSION_ID
hope this helps
Zekeriya

Deleting a row from a table control through right-click menu

I have a table control. I want to delete a row from it when a user right clicks on a particular row and selects "Delete row" menu item. I have managed the creation of menu item but have not been able to delete the row which is right clicked and the menu item "Delete row" is selected. Guidance required! Thanks!

smercurio_fc wrote:
It's irrelevant whether the table is a control or indicator. See attached VI.
Hi smercurio,
please see the attached picture. In my previous post i mean the different in the menu. The red marked function is not available, if the table is an indicator. LV8.5!
Mike
Message Edited by MikeS81 on 04-18-2008 05:19 PM
Attachments:
Unbenannt.PNG ‏22 KB

Locking a particular row in a table control

Similar Messages

Maybe you are looking for