Locking the default options for IMPORT

Could we have a more definitive way to establish personal defaults for IMPORT.
When I import from my camera card, I normally start in the Folder sub-panel of Library and do a right-click "Create a new folder inside ..." and then after that is completed I select the folder just created and right click again and "Import to this folder ..."
This brings up IMPORT with my destination already visually established AND the folder already created within my folder structure and then all I need to do is quickly verify my options and click IMPORT in the lower right corner.
But for the life of me, I couldn't get my options to be sticky ... e.g. preview resolution, destination, etc. I'd set them, do the IMPORT as above, finish it and when I'd go back in they wouldn't have been left the way I set them. But I knew that sometimes this DID happen.
Turns out that if you invoke IMPORT via the button in the lower left corner of Library and complete the sequence (rather than import to this folder via a right-click) ... then options set from that initiation point are sticky and are rembered the next time you go in.
My question is: could we not have a more specific way of saving the defaults on the screen so no matter how you entered IMPORT, you can establish your default and 'lock' it.
jc

The best you can do until Adobe sees fit to make properly sticky is to use import presets. Please forgive if you already knew that...
For feature request aimed at Adobe, go here:
http://feedback.photoshop.com/photoshop_family/topics/new
(this is user-to-user forum)

Similar Messages

Change the default option for a select box

Hi,
I have a select box, with the options built from a Spry Dataset
<select name="AvatarSelect" id="AvatarSelect" spry:region="myAvatars">
<option spry:repeat="myAvatars">{A_NAME}</option>
</select>
I wish to change the default selected option (which is usually the first row returned from the dataset) based on a value for A_NAME that I know from another spry dataset.
Tried using Spry.$$('#AvatarSelect') to get to the the array of select options but to no avail.
How can I cycle through the options and then set the selected on, based on a match for A_NAME?
Cheers
Phil

Hi Phil
I think this is the way
<select name="AvatarSelect" id="AvatarSelect" spry:region="myAvatarsLookup myAvatarsValue">
<option spry:repeat="myAvatarsLookup" spry:test="'{myAvatarsValue::A_NAME}'=='{myAvatarsLookup::id}'" value="{myAvatarsLookup::id}" selected="selected">{A_NAME}</option>
<option spry:repeat="myAvatarsLookup" spry:test="'{myAvatarsValue::A_NAME}'!='{myAvatarsLookup::id}'" value="{myAvatarsLookup::id}">{A_NAME}</option>
</select>
Cheers

How to set PPT as the default option for saving powerpoint output

Hi,
I have created a rtf template to produce powerpoint output using Oracle BI Publisher. The problem is that when user tries to save the powerpoint output of BI Publisher, default file type to save it is selected as .mht
So now user have to scroll down the save as list and select .ppt as file type. Is there nay way by which I can set the the default save as type to .ppt by changing the server settings or at template level.
Thanks in advance.

Similar question. When I hit Ctrl-Alt-S, the default is TIFF; is there a way to make the default PSD?

Default option for password in UME

Hi,
Is there a way that when we create new users in UME, that the default option for password management is set to "Disabled Password" in stead of "Define Initial Password".
We are using SPML SOAP message to create the users and if there is no password in the SPML messgae, the user is created, but no logon is possible as the system expects that you should have a password.
We will like to avoid sending in the password as part of user creation process, as these users will have to be created with no password. These users will never do a basis authentication, but are needed for SSO using HTTP header variable..
Thanks,
Vikrant sud

Is this a portal or what?
On the ABAP side this is possible, so I would expect the Java APIs to offer the same.
Looking in the PASSWORD structure is the wrong place, try the LOGONDATA (if it is done the same way). If you activate it in the call it should delete the PASSWORD regardless.
Sorry, I have an ABAP mentality... but consistent APIs make it easier (to have to understand less concepts) and SAP increasingly does this.
Cheers,
Julius
Edited by: Julius Bussche on Nov 19, 2009 9:47 PM

How to set the default values for print options

Hi all,
We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?

Hi Sandy,
This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
this will surely solve the issue.
Regards
Gunaseelan

When using iPhoto can I remove some of the default options such as faces or flagged etc. There are more bits than I need for my basic use.

When using iPhoto can I remove some of the default options such as faces or flagged etc. from the left bar. There are more bits than I need for my basic use.

Hello Susan,
Not sure if I have fully understood your question but have you tried ...
iPhoto > iPhoto help > browse help > view and organise. Perhaps this touches on some of your needs.
Usually, best results for questions come from posting to the forum directly related to the question, in this case iPhoto. That tends to find the gurus
Would you like me to ask the hosts to relocate your question?

How do you invoke the default browser for Unix/OSX

Does anyone know how to programmatically display the contents of a URL in the default browser for a Unix system? I found a javaworld article on doing this using Runtime.getRuntime().exec(cmd). The article gives the cmd string for invoking the default browser in Windows, and for invoking the Netscape browser in Unix.
This can easily be extended to invoke any known browser executable in a known path on a Unix system; but I'd like to invoke the default browser without knowing what or where it is. I'm specifically targetting Mac/OSX, but any Unix solution is worth trying.
Is there a Unix command for launching the default browser to display the contents of a given URL? Or is there an alternative approach, rather than invoking Runtime.exec()?
-Mark

After extensive google searching, I came across a partial solution. This code detects the default browser on a Mac, and provides an elegant solution for trying standard browsers in turn for other Unix systems. I tested it on WIndows XP and Mac OSX 3.9, and it detected the default browser each time. A suped up version of this tool is available as a SourceForge project. You can find it here:
http://sourceforge.net/projects/browserlaunch2/
Here's the simplified code:
// Bare Bones Browser Launch                          //
// Version 1.5                                        //
// December 10, 2005                                  //
// Supports: Mac OS X, GNU/Linux, Unix, Windows XP    //
// Example Usage:                                     //
//     String url = "http://www.centerkey.com/";       //
//     BareBonesBrowserLaunch.openURL(url);            //
// Public Domain Software -- Free to Use as You Like //
import java.lang.reflect.Method;
import javax.swing.JOptionPane;
public class BareBonesBrowserLaunch {
   private static final String errMsg = "Error attempting to launch web browser";
   public static void openURL(String url) {
      String osName = System.getProperty("os.name");
      try {
         if (osName.startsWith("Mac OS")) {
            Class fileMgr = Class.forName("com.apple.eio.FileManager");
            Method openURL = fileMgr.getDeclaredMethod("openURL",
               new Class[] {String.class});
            openURL.invoke(null, new Object[] {url});
         else if (osName.startsWith("Windows"))
            Runtime.getRuntime().exec("rundll32 url.dll,FileProtocolHandler " + url);
         else { //assume Unix or Linux
            String[] browsers = {
               "firefox", "opera", "konqueror", "epiphany", "mozilla", "netscape" };
            String browser = null;
            for (int count = 0; count < browsers.length && browser == null; count++)
               if (Runtime.getRuntime().exec(
                     new String[] {"which", browsers[count]}).waitFor() == 0)
                  browser = browsers[count];
            if (browser == null)
               throw new Exception("Could not find web browser");
            else
               Runtime.getRuntime().exec(new String[] {browser, url});
      catch (Exception e) {
         JOptionPane.showMessageDialog(null, errMsg + ":\n" + e.getLocalizedMessage());
   }

How can I get the default value of a particular preference programatically. I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com

Error while building the default domain for intigrated weblogic server

Hi,
An error occurred while building the default domain for integrated weblogic server
log file contains fallowing details about error
"C:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd" "C:\Oracle\Middleware\jdeveloper\MyWork\system11.1.1.5.38.61.26\o.j2ee.adrs\CreateDefaultDomain.py"
Process started
wlst >
wlst > CLASSPATH=C:\Oracle\Middleware\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\Middleware\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\Middleware\jdk160_24\lib\tools.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic_sp.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\Middleware\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\webservices.jar;C:\Oracle\Middleware\modules\org.apache.ant_1.7.1/lib/ant-all.jar;C:\Oracle\Middleware\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar;;C:\Oracle\Middleware\oracle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\adf-share-mbeans-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\adfscripting.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\applcore-diagnostics-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\mdswlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\auditwlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\igfwlsthelp.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\jps-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\jrf-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\oamap_help.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\oamAuthnProvider.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap_help.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ovdwlsthelp.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\sslconfigwlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\wsm-wlst.jar
wlst >
wlst > PATH=C:\Oracle\Middleware\patch_wls1035\profiles\default\native;C:\Oracle\Middleware\patch_jdev1111\profiles\default\native;C:\Oracle\Middleware\wlserver_10.3\server\native\win\32;C:\Oracle\Middleware\wlserver_10.3\server\bin;C:\Oracle\Middleware\modules\org.apache.ant_1.7.1\bin;C:\Oracle\Middleware\jdk160_24\jre\bin;C:\Oracle\Middleware\jdk160_24\bin;;C:\Oracle\Middleware\wlserver_10.3\server\native\win\32\oci920_8
wlst >
wlst > Your environment has been set.
wlst >
wlst > CLASSPATH=C:\Oracle\Middleware\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\Middleware\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\Middleware\jdk160_24\lib\tools.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic_sp.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\Middleware\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\Middleware\wlserver_10.3\server\lib\webservices.jar;C:\Oracle\Middleware\modules\org.apache.ant_1.7.1/lib/ant-all.jar;C:\Oracle\Middleware\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar;;C:\Oracle\Middleware\oracle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\adf-share-mbeans-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\adfscripting.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\applcore-diagnostics-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\lib\mdswlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\auditwlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\igfwlsthelp.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\jps-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\jrf-wlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\oamap_help.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\oamAuthnProvider.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap_help.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\ovdwlsthelp.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\sslconfigwlst.jar;C:\Oracle\Middleware\oracle_common\common\wlst\resources\wsm-wlst.jar;C:\Oracle\Middleware\utils\config\10.3\config-launch.jar;C:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbynet.jar;C:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbyclient.jar;C:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbytools.jar;;
wlst >
wlst > Initializing WebLogic Scripting Tool (WLST) ...
wlst >
wlst > Welcome to WebLogic Server Administration Scripting Shell
wlst >
wlst > Type help() for help on available commands
wlst >
wlst > Creating Default Domain
wlst > Reading template: /C:/Oracle/Middleware/wlserver_10.3/common/templates/domains/wls.jar
wlst > Setting Name to 'DefaultServer'
wlst > Setting ListenAddress to ''
wlst > Setting ListenPort to 7101
wlst > Setting domain administrator to 'FAAdmin'
wlst > Setting domain password.
wlst > Problem invoking WLST - Traceback (innermost last):
wlst > File "C:\Oracle\Middleware\jdeveloper\MyWork\system11.1.1.5.38.61.26\o.j2ee.adrs\CreateDefaultDomain.py", line 59, in ?
wlst >      at com.oracle.cie.domain.script.jython.WLSTSecurityPrincipal.set(WLSTSecurityPrincipal.java:70)
wlst >
wlst >      at com.oracle.cie.domain.script.jython.WLSTSecurityUser.setPassword(WLSTSecurityUser.java:33)
wlst >
wlst >      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
wlst >
wlst >      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
wlst >
wlst >      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
wlst >
wlst >      at java.lang.reflect.Method.invoke(Method.java:597)
wlst >
wlst >
wlst > com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: java.lang.Exception: The password must be at least 8 alphanumeric characters with at least one number or special character.
wlst >
rohit

Hi,
you see that message: "The password must be at least 8 alphanumeric characters with at least one number or special character." ?
The password: The weblogic password you provide when prompted
must be at least: minimal condition for secure passwords enforced on WLS by default
at least 8 alphanumeric characters: no 7 but eight or more characters
with at least one number or special character: password should have a number in it or an "@" "-" or similar
E.g.
weblogic1
is one password option that would meet that requirement
Frank

What are the default values for "default if unwired"?

How do you know what the default value for an object will be...if using a "use default if unwired" with an event case?
Is there a listing somewhere of what default values will be?
Thank you,
cayenne

tst wrote:
Personally, I would highly recommend disabling this on every single tunnel coming out of an event structure (with the possible exception of the tunnel going to the loop's stop terminal). If you use this option, you are almost guaranteed to forget to wire a required value into a tunnel at some point in the future when you add a new case.
More generally, I think that this option should not be the default for these tunnels. You can see more about this here and I would suggest voting it up if you agree with it - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Output-tunnels-from-event-structure-should-default-to-...
VERY much agreed! Disabling the "default if unwired" option makes absolutely certain that you have considered the correct value for every case.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

How do I change the default locations for the iTunes music and iPhone back-up folders?

My computer's hard drive is partitioned, with one partition having all of the Windows system files, and the other having all of my documents, music, videos, etc. When I installed iTunes, it automatically created its music and iPhone folders on the Windows partition. I've been able to change the default save folders for other programs to the second partition, but I'm having troubles finding this option in iTunes (I even went back and re-installed it to see if I could find it that way, but no dice). Is there a way to change the default folders for the iTunes library and iPhone files? It takes up A LOT of space on my Windows partition, so it would be very great to get that moved over.
Thanks!

You can't selectively move individual folders withing the iTunes folder, but you can move the entire folder to, say, an external dive. To delink the iTunes application to the new library location:
Open iTunes while holding down the Option key (Mac) or Shift key (Windows).
In the resulting dialog, click the Choose Library button.
Select the iTunes folder you moved to the external hard drive.
Click Choose (Mac OS X) or Open (Windows) and then choose the iTunes Library file inside .

Pdf on Windows 8;How do I get adobe to be the default app for pdf files.

I installed pdf reader on my windows 8 laptop, but windows only opens with its "TWINUI". In its "other" option acrobat reader doesn't appear. It also doesn't appear on the windows desktop.
How do I get adobe to be the default app for pdf files.

http://winsupersite.com/article/windows8/windows-8-tip-change-file-associations-144102

Change the default setting for report painter reports.

HI All
Can we change the default setting in SAP/R3 in the report painter reports for the selection screen options?
If yes,Please let me know how we can change the default settings.
Thanks in Advance
Best regards
Venu

HI
We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
How and where do we set or change the default parameters for the selection screen ?
Thanks in advance
Best Regards
Venugopal

How do I change the default properties for Replace(Ins)?

Acrobat Pro X
Comment tools: Annotations
All tool icons EXCEPT Replace(Ins) show "Tool Default Properties" as an option when right-clicked. When I right-click a particular replacement in the document and select "Properties," there is no option to set current as default.
So, how do I change the default properties for this annotation tool? I need to change the Author and the color.
Thanks,
Nancy

Create customized controls for your graphs and controls and setup your favorite attributes .
Use your custom controls instead of the canned controls.
Do a search on UI and you will find a community that already created custom controls.
Visualize the Solution
CLA
LabVIEW, LabVIEW FPGA

Locking the default options for IMPORT

Similar Messages

Maybe you are looking for