Log and Transfer disk image jerky in FCP7

Saved SDHCs as a Disk Image onto external HD. Opening OK via Log and Transfer - but the result is the video is jerky.
Can't work-out what went wrong or how to fix it. Lots of back-ups this way and would really apprciate some guidence, please.
Keith

First time saving and importing.
Panasonic 151 camcorder used at 1280 x 720p 50fps (Apple ProRes 422 14MB/sec 48.0 Khz, 16-bit & Square Pixel Aspect) with the capture scratch onto another external HD.
Just importing as I would direct from the SDHC.
Strangely, the video plays fine in the L&C window when deciding on I&O points but not inside FCP7 project (?).
Keith

Similar Messages

FCP7 Log and Transfer, Unsupported Media . . .

Last night I used two different SDHC cards in my Canon Vixia HFS100. FCP7 will import clips via Log and Transfer from one, but not the other. It just ignores everything on it (but I have 1.4 GB of recordings on it).
When I copy the card to a hard drive and point Log and Transfer to that folder, I get the message "CANON contains unsupported media or has an invalid directory structure"
Before using this card, I did a full initization of the card. I compared the directory structures of the two. They appear identical. I haven't messed with either in the Finder.
How do I tell what is wrong? How do I fix it? Or should I just try converting with something like Voltaic? I'm an FCP beginner. So, I would rather not stray too far from its work flow.
Thanks!

On the card that you are having trouble with:
1) make sure there are no still images
2) make sure there is no non-hd video (log and transfer works with AVCHD HD video clips, not MPEG SD clips)
3) if possible, all the hd video clips should be of one quality/size/format setting
4) in the log and transfer window, click on the gear shaped icon in the top center of the screen to set the Log and Transfer Preferences:
Set the Import Preferences for AVCHD to Plain Stereo:
Click OK, then restart FCP, reconnect the camera and try again.
MtD

Is there a way to import clips from AVCHD folders I have copied from my camcorder to my hard disk? With FCE I could import these clips using log and transfer.

In FCP-X is there a way to import AVCHD clips from an AVCHD file folder I have copied from my Canon hard disk camcorder to my iMac hard disk? With FCE I used log and transfer with no problem; but, FCP-X doesn't import them. It will import AIC files that have been created in FCE from the original AVCHD files. If FCP-X will not import these files directly from the copied AVCHD folder, is there a workaround using other software to convert the files? For example, Compressor? (Canon does not provide any AVCHD conversion software for OSX).

Hi jphil and Tom
I have exactly the same problem but the answer you (Tom) provided did not help in my case. Trying to "Import ->From Camera" and pointing to the AVCHD folder yields the error message: "(Folder) contains unsupported files or has invalid directory structure."
Folder structure is
AVCHD
     BDMV
          CLIPINF
               .CPI files
          Index.bdm
          Movieobj.bdm
          PLAYLIST
               .MPL file
          STREAM
               .MTS files
AVF_INFO
     3 files (.bnp, .inp, .int)
DCIM
     101MSDCF
          empty
     MODELCFG.IND (file)
My question is: Is that not a "camera archive" of the type you talked about in the thread? Is it on principle not possible to import the files in that format/directory structure? If not, since the shots were not taken by myself, what should I ask the guy who shot the movies to give me to be able to work with them in FC?
I work with a brand new Final Cut Pro X 10.0.4 (still very clumsy with it) on an iMac 11,3 with MacOS 10.6.8.
I downloaded the latest version of codec updates from the Apple support site but no difference.
Thank you in advance
Giorgio
Freiburg, Germany

Log and Transfer in FCP7 from Firestore HD100

I recently did the upgrade from FCP6 to FCP7 in order to take advantage of the log and transfer capability for file based media. I have a JVC HD200 camera with a Firestore MR-HD100 drive attached. I have as yet had no luck at all getting FCP7 to recognize a file from the HD100 drive in any configuration.
Am I missing something or will the FCP7 log and transfer application not work with files generated with this drive?

No, we DO get the point. We know exactly what you want to do...you just chose a shooting format that doesn't do what you want to do. If you wanted that functionality you should have chosen to shoot on tape, P2, SxS, or SD card. Or used the firestore with a P2 camera and shot using the P2 file structure. You chose a camera that shoots directly to QT and therefore does not have that functionality.
As it is you have to retain all of the original file at full size and archive that.
Because you chose a shooting format in which you have to do that.
I chose the particular format because it offered me a specific set of features that suited my shooting needs.
What are those features that any other of the cameras that shoot to tape, P2, SxS or SD card don't offer?
That doesn't mean that I have to accept that Apple is not doing their job in covering all aspects of the professional film and editing world and making an interface addition that is substandard.
OK, name ONE NLE that would do what you want with the format you chose to shoot? Avid? Nope. Premiere...nope. Vegas? Nope. Edius? Nope. So is EVERYONE out there not doing their job in this case? No. You chose a format that is NOT suited to doing what you wanted to do. That is no ones fault but your own.
Shane

FCP7 Log and Transfer Crash

Im using the Log and Transfer for my Sony Z7U and upgraded to FCP7, downloaded Sonys FCP7 drivers for Log and Transfer and now it starts to load the drivers and then crashes so far every time.
I rebooted the computer to see if it helps but, so far no success.
What am I doing wrong?

You mentioned you are using Log and Transfer to capture the files from the HVR MRU as Apple Pro Res LT. I only see that option when working at 24FPS. I have the Z5U with the same HVR MRU1 Flash recorder and I love it, accept that I cannot use Log and Transfer to capture as Apple Pro Res when working at 29.97 which is a big problem. I either have to go back to Log and Transfer from tape, which we still use as a backup, or convert the HDV files later that were transferred from the CF media.
Have you figured out a way to transfer 29.97 files from the MRU as Apple Pro Res?

Why won't Log and Transfer in FCP7 recognize video files from my SD card? They were shot on a cheepo Aiptek camera.

Why won't Log and Transfer in FCP7 recognize video files from my SD card? They were shot on a cheepo Aiptek camera.

David, the camera shoots .mov files. I have the latest version of QuickTime installed but still nothing.
I teach high school, but I'm reluctant to download FCPX for my students at the moment. I may try it but I really want to stick with what we're using currently, at least for now.
iMovie started to import files, but very slowly. I guess I'm frustrated that the files shot on the Canons I also use transfer just fine, but the Aiptek camera isn't cooperating.
Would you suggest using MPEG Streamclip?
Thanks again in advance.

Trouble with FCP7, .mts, and Log and Transfer

I'm trying to upload footage from a Canon Vixia S200, and Log and Transfer won't work. For reference, the footage is stored on the SD cards in the camera rather than internal memory. When I tried Log and Transfer for an older Vixia that used internal memory, Log and Transfer worked. Is there some way around this?

FCP 7 doesn't work with 1080p60. That format came out after it's last update. You need to use ClipWrap2 to convert the footage to ProRes 422...or use another editing app that will work with this footage.

AVCHD log and transfer jerky jumpy during playback

I've been given some files from a Sony HDR-CX12 to export to dvd. The files playback fine in the log and transfer window but stutter / jump in the viewer window and also when added to the sequence.
The files provided are
a AVCHD folder
a AVF_INFO folder
a DCIM folder
and two locked Unix executable files.
Final Cut Easy Set Up
Format - HD
Rate - 29.97
Use - 1080p30 FireWire Basic
Log and Transfer
Transcode to Apple ProRes 422
Final Cut Pro version 6.0.5
System
Os 10.5.6
processor 2 x 2.8 GHz quad-core Intel Zeon
Memory 14 gb
Hard drive containing files is internal.
side note - i did migrate the system from a PowerPC but have since updated the lastest FCP update.
If anyone has any help or tips to get these files playing back properly I'd really appreciate hearing from you.

Do you have Perian installed? I had the same problem, but when I disabled Perian in the System Preferences panel and re-transfered the footage, everything looked fine. Once your footage has been re-transfered, you can re-enable Perian.

Log and Transfer without original cards?

I had to go back to FCP7 for a project and I forgot to "log and transfer" and just pulled in my H.264 files. I have all the raw movie files in a folder on my HDD, but I do not have the CF cards or disk images. Is there anyway to go through log and transfer to transcode my H.264 files? For what I remember it wants the directory structure from my CF card (shot on Canon Mark iii) but I don't have those anymore. I do have the movie files themselves so I don't feel like I should be sorry out of luck.
Any help would be great.
Thanks!

You don't need Log and Transfer for this...you can use Compressor to convert this footage to ProRes 422. There are presets in Compressor so it'll all just be drag and drop.

Log and transfer doesn't recognize my SD-cards any more!

On my FCP7 log and transfer won't recognize SD-cards any more.
Log and transfer just flashes the "adding" -part and then nothing, or in some times it crashes the whole Final Cut.
I have been using the same cards, my old Canon 60D and Canon E-1 movie plugin for years. Only new thing is that I now have a Canon 6D with old 60D.
The weirdest thing is that, I have some old SD card images (made with disk Utility for back up) and when opened there are no problems.
Any suggestions?
Thanks.

Have you tried resetting your fcp preferences? Digital Rebellion's Preference Manager is the best tool for doing this in my opinion.
https://discussions.apple.com/docs/DOC-2491
Have you loaded or installed any software recently or done any software updates?

Glitches Convertng AVCHD using Log and Transfer

Hi, I'm converting a large batch of AVCHD to ProRes 422 using log and transfer for a project. I've converted almost all the footage, but have had to break down some longer clips because FCP7 won't convert the whole clip, it starts to act wonky. There is one large clip that I'm trying to convert a section of, that just won't convert and keeps giving me the annoying red exclamation point no matter what I do. I've tried changing the scratch disk, using the original name of the clip, unchecking "abort capture on dropped frames," changing the in and out on points--all the suggestions that I've found on discussion boards--nothing has worked. I've considered buying some external software, but am afraid the clip itself might be corrupted, though I've converted other sections of it with no problem. Any suggestions?

Hi Michael, Thanks for the quick response. I copied the clip, the whole card to a different internal drive and FCP crashed when I tried to transfer a section the troublesome clip. Here's part of the report I got after the crash:
Application Specific Information:
*** Terminating app due to uncaught exception 'NSMallocException', reason: '*** -[NSConcreteMutableData appendBytes:length:]: unable to allocate memory for length (75356)'
*** Call stack at first throw:
The camera is the Sony NEX-FS700. As I said before, I'm baffled. I've transferred two other sections from this same clip and also from all the other clips from this card with no problem. It was a couple of months ago, but I've not changed any settings or preferences.

Log and Transfer: Red exclamation points are attacking our project!

We are shooting a documentary with a HVX and a Firestore in 720p/24p. Every shoot, we move the files from the Firestore to the hard drive. We then log and transfer off of the drive to a G-Raid scratch disk.
Up until the other day, we were having no problems "logging and transferring". For some reason, we are now able to play and label the clip, but when we go to "add clip to queue" a red exclamation point keeps coming up.
This is inclusive of old and new footage. I have tried to change the length of the file names as well as restart Final Cut as well as the drives.
I know you guys are much smarter than we are, so we are looking forward to your wisdom.

#36 - One or More P2 files failed to import.
Shane's Stock Answer #36 - "One or more clips failed to import..."
Very often in the field with this camera the camera operator will delete clips from the P2 card that they just don't like. That is the beauty of this camera. But, the still for that video file (located in the CLIP folder in the CONTENTS folder)...the still that you see when you are in the P2 Import window...is not deleted. So you will see the image, and the name, but the video file would have been deleted.
What you can do it compare the file names in the VIDEO folder and CLIP folder and see if anything is missing. If something is, then you know what the problem is. You can then just import the rest a few at time, skipping that one.
ALSO...in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
Shane

Efficient way get FCE4 Log and Transfer to read .mts files stored on drive?

Hi All
I've searched the FCE discussion forum and not found an answer verified by more than one user to this question: What is an efficient way to get FCE4 (via the Log and Transfer window) to see .mts files from an AVCHD camera stored on a drive (NOT via the camera -- directly from the drive)?
I am trying to plan the most space-efficient system possible for storing un-transcoded .mts files from a Panasonic AG-HMC151 on a harddrive so that I can easily ingest them into FCE4. I am shooting a long project and I want to be able to look at .mts files so that I can decide which ones to transcode to AIC for the edit.
Since FCE4 cannot see .mts files unless they have their metadata wrapper the question is really 'how do I most efficiently transfer .mts files from the camera to a storage harddrive with their metadata wrappers so that FCE4 can see them via the log and transfer window?'
Nick Holmes, in a reply in this thread
http://discussions.apple.com/thread.jspa?messageID=10423384&#10423384
gives 2 options: Use the Disk Utility to make a disk image of the whole SD card, or copy the whole contents of the card to a folder. He says he prefers the first option because it makes sure everything on the card is copied.
a) Have other FCE users done this successfully and been able to read the .mts files via Log and Transfer?
In a response to this thread:
http://discussions.apple.com/thread.jspa?messageID=10257620&#10257620
wallybarthman gives a method for getting Log and Transfer to see .mts files that have been stored on a harddrive without their metadata wrappers by using Toast 9 or 10.
b) Have any other FCE4 users used this method? Does it work well?
c) Why is FCE4 unable to see .mts files without their metadata wrappers in the Log and Transfer window? Is it just a matter of writing a few lines of code?
d) Is there an archiving / library app. on the market that would allow one to file / name / tag many .mts clips and view them prior to transcoding into space-hungry AIC files in FCE?
Any/all help would be most gratefully received!

I have saved the complete file structure on DVD as a backup, but have not needed to open them yet. But I will add this. As I understand the options with Toast you are infact converting the video to AIC or something like it. I haven't looked into it myself, but I can't imagine the extra files are that large, but maybe there are significant, I don't know. The transcoded files are huge in comparison to the AVCHD file.
A new player on the scene for AVCHD is Clipwrap 2.0. As I understand this product. It rewraps the AVCHD into a wrapper the Quicktime can open and play. This is with the MTS files only, the rest of the file structure is not needed. The rewrap is much faster that the transcode to AIC. So you have the added benefit of being able to play the files as well as not storing the extra files. The 2.0 version (which is for AVCHD) was just recently released. I haven't tried it and don't personally know of anyone who has. You might want to try this, there is a trial version as I recall.

Log and Transfer in Background causing big problems

I don't know if you are supposed to be able to have Log and Transfer importing in the background while you edit, but it seems to allow me to do this, but I have found a VERY BAD side effect.
Log and Transfer goes about it's business importing, but if I click around in the the bin, playback other files that are already imported, etc. Log and Transfer will not fully import the clips it is working on. BUT, instead of giving me ANY error, it simply thinks it did it's job. The end results is a clip in my bin that is maybe 10 seconds long and the matching clip on the SD card is 5 minutes! No error messages anywhere.
At first I thought I had accidently stopped recording on a good number of my clips. I was freaking out. Thankfully I found that the clip on the SD card was the full 5 minutes long. When I reimported it (without doing anything in FCP at the same time) the full clip came in. (THANKFULLY I had a disk image of the SD card and wasn't just relying on my backup for the FCP files post import).
Now I just make sure not to do anything in FCP while it's importing from Log and Transfer, but it seem like quite a dicey situation that could get people in a log of trouble.

Me too. I've learned the lesson. But I thought FCP used to NOT allow this. It would beep and not let me do anything else.
I'm sad they let you do it, because someone can do it without realizing importing is still going on and mess things up and not realize it until down the road in the edit and be screwed.

Log and Transfer - panasonic HDC-SD5 - quits on startup - AVCHD

Hi Guys,
When an SDHC (4Gb) card or HDC-SD5 (via USB) is connected, and I bring up the Log and Transfer window, Final Cut Pro quits without a message. I have been struggling with the same issue with iMovie '08. Please see this thread for details:
http://discussions.apple.com/thread.jspa?messageID=5526463&#5526463
Configuration: FCP 6.0.1, Pro Update, QT 7.1.6. OSX 10.4.9. MacPro.
I no longer know what to do with this issue. I've tried using Disk Utility to make an image and then mount it...same result. The SD reader is not the issue as the result is the same even if I connect the camcorder via USB. I noticed that I if I don't apply the Pro Apps Update and keep FCP at 6.0, it doesn't crash but fails to recognize the Panasonic's AVCHD structure on the SD card.
What I did notice, however, was the manual mentioned that SD cards, whether it be 4Gb or 8Gb are formatted with FAT32 and everything below 4Gb is formated with FAT16. Perhaps this can be the root cause? Is there anybody suing a SDHC 4Gb card , formatted with the Panasonic AVCHD structure having success with FCP 6.0.1 (and or iMovie '08)???
I also read that QuickTime 7.2 can be the issue, reformatted and installed 7.1.6, again, same result.
Please any help would be appreciated. Thanks.

Max Average, thanks for your reply but you suggestion does not work. I copied the contents of the SD card to a directory on my main volume, opened FCP, went to Log and Transfer, clicked the Add Folder button and then navigated to aforementioned directory -- and still FCP quits!
The directory structure as it appears on my panasonic formatted drive is:
DCIM
MISC
PRIVATE
|_AVCHD
|_AVCHDTN
|_BDMV
|_CLIPINF
|_00000.CPI
|_INDEX.BDM
|_MOVIEOBJ.BDM
|_PLAYLIST
|_00000.MPL
|_STREAM
|_00000.MTS
Is this a standard across all AVCHD manufacturers?

Log and Transfer disk image jerky in FCP7

Similar Messages

Maybe you are looking for