Log on ticket not activated on the server
Hi all
When i tried to test compont crm_ui_frame,using transaction code bsp_wd_cmpwd,it opens the url
Where in, i am not able to enter user name and password, those fields are gray out. System seeking the fallowing errors:
1) . sso log on not passable, log on ticket not activated on the server.
2).No switch to https occurred so it is not secure to send a password. for which i try to activated the profiles using transaction code:RZ10. the fallowing profiles are
Login/accept_sso2_ticket=1, login/create_sso2_ticket=2. While doing this i am getting errors, so i could not able to activate those profiles. The following errors are
E: login/accept_sso2_ticket not a logical value 1#.
W: unknown parameter. Start up/ trimming_propertics, a check cannot be performed.
W: unknown parameter. Start up/um/home, a check cannot be performed.
W: unknown parameter .start up / max_coches, a check cannot be performed.
E: jstart up/ instance_propertics file D:\usr\sap\c27\DVEBMGS00\J2EE\cluster\ instance.
E: Exe\j2ee.file D:\usr\sap\c27\DVEBMGS00\exe\ jcontrol.exe .does not exist.
Hence, please help me in this regards, and for your kind information, i have crm2007 and TREX servers both are on single machine, and i do have DNS server connected to my system.
Regards
padmarao.
Hi,
>E: login/accept_sso2_ticket not a logical value 1#.
Check if the value is really "1" and not "1#".
I have these parameters set on my CRM 2007 system and the saplpgon ticket works fine.
>2).No switch to https occurred so it is not secure to send a password. f
You have to activate HTTPS for the ICM and you have to choose "Logon via HTTPS" for the
/sap/crm_logon service in SICF.
Regards,
Olivier
Similar Messages
-
SSO logon not possible; logon tickets not activated on the server
When I am on RWB
1) click "component monitoring" ->"display all"
2) click "CCMS"
I get a popup says:
"SSO logon not possible; logon tickets not activated on the server"
I find some threads about this on SDN but they are about
EP. My case is PI7.0SP08.
Please advise how to overcome this issue?
Thanks w/ points.
Message was edited by:
jennifer leehI,
do you have the follwoing in our SXMB_ADM if not add them.
SXMB_ADM->IntegrationEngine configuratin-> edit the speicifc configuratin then add the follwoing
Category:RUNTIME Parameters: logging Value:1
If its done. check this alos...whether your browser settings will accept the cookies or not. for SSO logon ticket method you need to have cookies accepted by our browser so check it. in internet page slect TOOLS ->internet options then ckeck for cookies settings.
How to Enable Single-Sign-On for XI 3.0 at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/69d95112-0d01-0010-8297-fa31feea26e0
/people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/b7d53ae8ab9248e10000000a114084/content.htm
regards
manoj kumar -
Hi Forum,
in my X1 server, in rwb, it gave error:
HTTP request failed. Error code: "503". Error message: "Service Unavailable [http://xyz:50000/AdapterFramework/rtc,
on further analysis we find that:
<b> Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Application sap.com/com.sap.xi.mdt cannot be started. Reason: it has hard reference to resource com.sap.aii.af.svc with type service, which is not active on the server.</b>
and the service/component com.sap.aii.af.svc is not present as the error says,
In visual admin, in the services list i couldnt find this particular resource,
pls instruct me how to deploy/start this service com.sap.aii.af.svc ,Hi,
Please check out the user authorization and role and also check that you are maintaining the passwords in all places where required.
Regards
Aashish Sinha
PS : reward points if helpful -
NQServer.log Timestamp is not matching with the Server/Machine timestamp?
Hello Gurus,
We are unable to trace the error messages with the weird time in the logging messages of NQServer.log. We are using obiee11.1.1.5 on AIX 6.1.
The machine has the date command output as Mon Apr 16 11:30:56 EDT 2012 but the NQServer.log message which has been logged at the above time has the time stamp as *[2012-04-16T15:30:21.000+00:00]*. With this weird timing we are unable to trace the error messages. Please let me know how to change the time stamp in the NQServer.log .
Thanks,
Anil
Edited by: user13741694 on Apr 16, 2012 8:34 AMIs there any update?
Thanks,
Anil -
i have just upgraded from an iPhone 3Gs to an iPhone 5. I am trying to transfer all my content via icloud but having problems logging in - it keeps telling me the server is not responding. Nano sim hasn't yet been registered - does this affect things?
Have you activated your phone with your carrier yet?
-
I have AlwaysOn SQL 2012 Enterprise set-up using Windows Failover Clustering Services (not FCI), and have 1 Primary node (P), 1 Synchronous Commit Auto Failover (SC), and 1 Asynchronous Commit Manual Failover (AC) node. It is set up to prefer secondary,
with the highest priority given to AC node.
I am using Ola Hollengren's scripts for Database Maintenance jobs, including a native BACKUP LOG job for the transaction logs of all user databases on a 1 minute schedule. His scripts already consider AlwaysOn, and although the job is set-up on all
3 nodes, only ever runs on AC node.
The job has been running successfully since initial set-up almost 1 year ago, but suddenly yesterday morning started to fail with the following error, only on 1 of the 13 databases in my availability group:
Date and time: 2014-06-08 09:36:11
Command: BACKUP LOG [my_db] TO DISK = N'E:\MSSQL\\Transaction Dumps\my_db\MySQLCL$MySQLAG_my_db_20140608_093610_U_LOG.trn' WITH CHECKSUM, COMPRESSION
Msg 35250, Level 16, State 11, Server AC, Line 1
The connection to the primary replica is not active. The command cannot be processed.
Msg 3013, Level 16, State 1, Server AC, Line 1
BACKUP LOG is terminating abnormally.
Outcome: Failed
Duration: 00:01:00
The other 12 databases continued to backup successfully.
Checking the Availability Group dashboard, windows event logs, and SQL Server error logs, including Failover Cluster events showed no issues.
However, monitoring software (Idera SQLdm) showed blocked sessions on P node. When I ran sp_who2, it showed that a background process was being blocked by another background process with an HADR BACKUP LOCK.
Since both processes were background processes, I was unable to kill either process. I temporarily disabled the transaction log backup job, but the blocked process was still active.
I ran DBCC CHECKDB (my_db) WITH all_errormsgs, no_infomsgs, data_purity on both P and AC nodes, with no errors. However, on AC node, it also showed 1 transaction rolled forward and 0 transactions rolled back. This also had the effect of releasing
the blocked background process, but another background process was now blocking with the same HADR BACKUP LOCK.
I tried to restart SQL Server Agent on AC node, which did not immediately seem to work. However, after a few minutes, I noticed that the block had disappeared. I re-enabled the transaction log backup job on AC and it started working normally
again. The error has not occurred again, but I am at a loss as to what happened, and how to prevent it from happening again.
Any help would be greatly appreciated.
DianeAnd here is part 2 of the stored procedure:
--// Execute backup commands //--
WHILE EXISTS (SELECT * FROM @tmpDatabases WHERE Selected = 1 AND Completed = 0)
BEGIN
SELECT TOP 1 @CurrentDBID = ID,
@CurrentDatabaseName = DatabaseName,
@CurrentDatabaseNameFS = DatabaseNameFS,
@CurrentDatabaseType = DatabaseType
FROM @tmpDatabases
WHERE Selected = 1
AND Completed = 0
ORDER BY ID ASC
SET @CurrentDatabaseID = DB_ID(@CurrentDatabaseName)
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
BEGIN
IF EXISTS (SELECT * FROM sys.database_recovery_status WHERE database_id = @CurrentDatabaseID AND database_guid IS NOT NULL)
BEGIN
SET @CurrentIsDatabaseAccessible = 1
END
ELSE
BEGIN
SET @CurrentIsDatabaseAccessible = 0
END
END
ELSE
BEGIN
SET @CurrentIsDatabaseAccessible = 0
END
SELECT @CurrentDifferentialBaseLSN = differential_base_lsn
FROM sys.master_files
WHERE database_id = @CurrentDatabaseID
AND [type] = 0
AND [file_id] = 1
-- Workaround for a bug in SQL Server 2005
IF @Version >= 9 AND @Version < 10
AND EXISTS(SELECT * FROM sys.master_files WHERE database_id = @CurrentDatabaseID AND [type] = 0 AND [file_id] = 1 AND differential_base_lsn IS NOT NULL AND differential_base_guid IS NOT NULL AND differential_base_time IS NULL)
BEGIN
SET @CurrentDifferentialBaseLSN = NULL
END
SELECT @CurrentDifferentialBaseIsSnapshot = is_snapshot
FROM msdb.dbo.backupset
WHERE database_name = @CurrentDatabaseName
AND [type] = 'D'
AND checkpoint_lsn = @CurrentDifferentialBaseLSN
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
BEGIN
SELECT @CurrentLogLSN = last_log_backup_lsn
FROM sys.database_recovery_status
WHERE database_id = @CurrentDatabaseID
END
SET @CurrentBackupType = @BackupType
IF @ChangeBackupType = 'Y'
BEGIN
IF @CurrentBackupType = 'LOG' AND DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') <> 'SIMPLE' AND @CurrentLogLSN IS NULL AND @CurrentDatabaseName <> 'master'
BEGIN
SET @CurrentBackupType = 'DIFF'
END
IF @CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL AND @CurrentDatabaseName <> 'master'
BEGIN
SET @CurrentBackupType = 'FULL'
END
END
IF @CurrentBackupType = 'LOG'
BEGIN
SELECT @CurrentLatestBackup = MAX(backup_finish_date)
FROM msdb.dbo.backupset
WHERE [type] IN('D','I')
AND is_damaged = 0
AND database_name = @CurrentDatabaseName
END
IF @Version >= 11 AND @Cluster IS NOT NULL
BEGIN
SELECT @CurrentAvailabilityGroup = availability_groups.name,
@CurrentAvailabilityGroupRole = dm_hadr_availability_replica_states.role_desc
FROM sys.databases databases
INNER JOIN sys.availability_databases_cluster availability_databases_cluster ON databases.group_database_id = availability_databases_cluster.group_database_id
INNER JOIN sys.availability_groups availability_groups ON availability_databases_cluster.group_id = availability_groups.group_id
INNER JOIN sys.dm_hadr_availability_replica_states dm_hadr_availability_replica_states ON availability_groups.group_id = dm_hadr_availability_replica_states.group_id AND databases.replica_id = dm_hadr_availability_replica_states.replica_id
WHERE databases.name = @CurrentDatabaseName
END
IF @Version >= 11 AND @Cluster IS NOT NULL AND @CurrentAvailabilityGroup IS NOT NULL
BEGIN
SELECT @CurrentIsPreferredBackupReplica = sys.fn_hadr_backup_is_preferred_replica(@CurrentDatabaseName)
END
SELECT @CurrentDatabaseMirroringRole = UPPER(mirroring_role_desc)
FROM sys.database_mirroring
WHERE database_id = @CurrentDatabaseID
IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_primary_databases WHERE primary_database = @CurrentDatabaseName)
BEGIN
SET @CurrentLogShippingRole = 'PRIMARY'
END
ELSE
IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_secondary_databases WHERE secondary_database = @CurrentDatabaseName)
BEGIN
SET @CurrentLogShippingRole = 'SECONDARY'
END
-- Set database message
SET @DatabaseMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Database: ' + QUOTENAME(@CurrentDatabaseName) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Status: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Standby: ' + CASE WHEN DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Updateability: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Updateability') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'User access: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') AS nvarchar) + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Is accessible: ' + CASE WHEN @CurrentIsDatabaseAccessible = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Recovery model: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') AS nvarchar) + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group: ' + @CurrentAvailabilityGroup + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group role: ' + @CurrentAvailabilityGroupRole + CHAR(13) + CHAR(10)
IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Is preferred backup replica: ' + CASE WHEN @CurrentIsPreferredBackupReplica = 1 THEN 'Yes' WHEN @CurrentIsPreferredBackupReplica = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
IF @CurrentDatabaseMirroringRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Database mirroring role: ' + @CurrentDatabaseMirroringRole + CHAR(13) + CHAR(10)
IF @CurrentLogShippingRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Log shipping role: ' + @CurrentLogShippingRole + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Differential base LSN: ' + ISNULL(CAST(@CurrentDifferentialBaseLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Differential base is snapshot: ' + CASE WHEN @CurrentDifferentialBaseIsSnapshot = 1 THEN 'Yes' WHEN @CurrentDifferentialBaseIsSnapshot = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
SET @DatabaseMessage = @DatabaseMessage + 'Last log backup LSN: ' + ISNULL(CAST(@CurrentLogLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
SET @DatabaseMessage = REPLACE(@DatabaseMessage,'%','%%') + ' '
RAISERROR(@DatabaseMessage,10,1) WITH NOWAIT
IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
AND NOT (DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') = 'SINGLE_USER' AND @CurrentIsDatabaseAccessible = 0)
AND DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 0
AND NOT (@CurrentBackupType = 'LOG' AND (DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') = 'SIMPLE' OR @CurrentLogLSN IS NULL))
AND NOT (@CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL)
AND NOT (@CurrentBackupType IN('DIFF','LOG') AND @CurrentDatabaseName = 'master')
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'N' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'Y' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'DIFF' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'N' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'Y' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
AND NOT ((@CurrentLogShippingRole = 'PRIMARY' AND @CurrentLogShippingRole IS NOT NULL) AND @CurrentBackupType = 'LOG')
BEGIN
-- Set variables
SET @CurrentDate = GETDATE()
IF @CleanupTime IS NULL OR (@CurrentBackupType = 'LOG' AND @CurrentLatestBackup IS NULL) OR @CurrentBackupType <> @BackupType
BEGIN
SET @CurrentCleanupDate = NULL
END
ELSE
IF @CurrentBackupType = 'LOG'
BEGIN
SET @CurrentCleanupDate = (SELECT MIN([Date]) FROM(SELECT DATEADD(hh,-(@CleanupTime),@CurrentDate) AS [Date] UNION SELECT @CurrentLatestBackup AS [Date]) Dates)
END
ELSE
BEGIN
SET @CurrentCleanupDate = DATEADD(hh,-(@CleanupTime),@CurrentDate)
END
SELECT @CurrentFileExtension = CASE
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'FULL' THEN 'bak'
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'DIFF' THEN 'bak'
WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'LOG' THEN 'trn'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'FULL' THEN 'bak'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'DIFF' THEN 'bak'
WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'LOG' THEN 'trn'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'FULL' THEN 'sqb'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'DIFF' THEN 'sqb'
WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'LOG' THEN 'sqb'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'N' THEN 'hbc'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'Y' THEN 'hbe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'FULL' THEN 'safe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'DIFF' THEN 'safe'
WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'LOG' THEN 'safe'
END
INSERT INTO @CurrentDirectories (ID, DirectoryPath, CreateCompleted, CleanupCompleted)
SELECT ROW_NUMBER() OVER (ORDER BY ID), DirectoryPath + CASE WHEN RIGHT(DirectoryPath,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END, 0, 0
FROM @Directories
ORDER BY ID ASC
SET @CurrentFileNumber = 0
SET @CurrentMirrorFilePath = NULL
WHILE @CurrentFileNumber < @NumberOfFiles
BEGIN
SET @CurrentFileNumber = @CurrentFileNumber + 1
SELECT @CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE @CurrentFileNumber >= (ID - 1) * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories) + 1
AND @CurrentFileNumber <= ID * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories)
SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
IF LEN(@CurrentFilePath) > 257
BEGIN
SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
END
IF @CurrentFileNumber = 1 AND LEN(@MirrorDirectory) > 0
BEGIN
SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
IF LEN(@CurrentFilePath) > 257
BEGIN
SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
END
END
INSERT INTO @CurrentFiles (CurrentFilePath)
SELECT @CurrentFilePath
SET @CurrentDirectoryPath = NULL
SET @CurrentFilePath = NULL
END
-- Create directory
WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateCompleted = 0)
BEGIN
SELECT TOP 1 @CurrentDirectoryID = ID,
@CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE CreateCompleted = 0
ORDER BY ID ASC
SET @CurrentCommandType01 = 'xp_create_subdir'
SET @CurrentCommand01 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_create_subdir N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''' IF @ReturnCode <> 0 RAISERROR(''Error creating directory.'', 16, 1)'
EXECUTE @CurrentCommandOutput01 = [dbo].[CommandExecute] @Command = @CurrentCommand01, @CommandType = @CurrentCommandType01, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput01 = @Error
IF @CurrentCommandOutput01 <> 0 SET @ReturnCode = @CurrentCommandOutput01
UPDATE @CurrentDirectories
SET CreateCompleted = 1,
CreateOutput = @CurrentCommandOutput01
WHERE ID = @CurrentDirectoryID
SET @CurrentDirectoryID = NULL
SET @CurrentDirectoryPath = NULL
SET @CurrentCommand01 = NULL
SET @CurrentCommandOutput01 = NULL
SET @CurrentCommandType01 = NULL
END
-- Perform a backup
IF NOT EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateOutput <> 0 OR CreateOutput IS NULL)
BEGIN
IF @BackupSoftware IS NULL
BEGIN
SELECT @CurrentCommandType02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP_DATABASE'
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP_LOG'
END
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @Compress = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION'
IF @Compress = 'N' AND @Version >= 10 SET @CurrentCommand02 = @CurrentCommand02 + ', NO_COMPRESSION'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SELECT @CurrentCommandType02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'xp_backup_database'
WHEN @CurrentBackupType = 'LOG' THEN 'xp_backup_log'
END
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_database @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
WHEN @CurrentBackupType = 'LOG' THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_log @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
END
SELECT @CurrentCommand02 = @CurrentCommand02 + ', @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ', @with = '''
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
SET @CurrentCommand02 = @CurrentCommand02 + ''''
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @read_write_filegroups = 1'
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CAST(@CompressionLevel AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @buffercount = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @maxtransfersize = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
IF @Throttle IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @throttle = ' + CAST(@Throttle AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @cryptlevel = ' + CASE
WHEN @EncryptionType = 'RC2-40' THEN '0'
WHEN @EncryptionType = 'RC2-56' THEN '1'
WHEN @EncryptionType = 'RC2-112' THEN '2'
WHEN @EncryptionType = 'RC2-128' THEN '3'
WHEN @EncryptionType = '3DES-168' THEN '4'
WHEN @EncryptionType = 'RC4-128' THEN '5'
WHEN @EncryptionType = 'AES-128' THEN '6'
WHEN @EncryptionType = 'AES-192' THEN '7'
WHEN @EncryptionType = 'AES-256' THEN '8'
END
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing LiteSpeed backup.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType02 = 'sqlbackup'
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION = ' + CAST(@CompressionLevel AS nvarchar)
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', THREADCOUNT = ' + CAST(@Threads AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', KEYSIZE = ' + CASE
WHEN @EncryptionType = 'AES-128' THEN '128'
WHEN @EncryptionType = 'AES-256' THEN '256'
END
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand02,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLBackup backup.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType02 = 'BACKUP_DATABASE'
SELECT @CurrentCommand02 = CASE
WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType02 = 'xp_ss_backup'
SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_backup @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
SELECT @CurrentCommand02 = @CurrentCommand02 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
IF @CurrentMirrorFilePath IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @mirrorfile = N''' + @CurrentMirrorFilePath + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ', @backuptype = ' + CASE WHEN @CurrentBackupType = 'FULL' THEN '''Full''' WHEN @CurrentBackupType = 'DIFF' THEN '''Differential''' WHEN @CurrentBackupType = 'LOG' THEN '''Log''' END
IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @readwritefilegroups = 1'
SET @CurrentCommand02 = @CurrentCommand02 + ', @checksum = ' + CASE WHEN @CheckSum = 'Y' THEN '1' WHEN @CheckSum = 'N' THEN '0' END
SET @CurrentCommand02 = @CurrentCommand02 + ', @copyonly = ' + CASE WHEN @CopyOnly = 'Y' THEN '1' WHEN @CopyOnly = 'N' THEN '0' END
IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CASE WHEN @CompressionLevel = 5 THEN N'ispeed' WHEN @CompressionLevel = 6 THEN N'isize' ELSE CAST(@CompressionLevel AS nvarchar) END
IF @RetryWrites IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @retrywrites = N''' + @RetryWrites + ''''
IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptiontype = N''' + CASE
WHEN @EncryptionType = 'AES-128' THEN 'AES128'
WHEN @EncryptionType = 'AES-256' THEN 'AES256'
END + ''''
IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptedbackuppassword = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLsafe backup.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput02 = [dbo].[CommandExecute] @Command = @CurrentCommand02, @CommandType = @CurrentCommandType02, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput02 = @Error
IF @CurrentCommandOutput02 <> 0 SET @ReturnCode = @CurrentCommandOutput02
END
-- Verify the backup
IF @CurrentCommandOutput02 = 0 AND @Verify = 'Y'
BEGIN
IF @BackupSoftware IS NULL
BEGIN
SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SET @CurrentCommandType03 = 'xp_restore_verifyonly'
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_restore_verifyonly'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ', @with = '''
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
SET @CurrentCommand03 = @CurrentCommand03 + ''''
IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying LiteSpeed backup.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType03 = 'sqlbackup'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand03,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLBackup backup.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType03 = 'xp_ss_verify'
SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_verify @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
SELECT @CurrentCommand03 = @CurrentCommand03 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
FROM @CurrentFiles
ORDER BY CurrentFilePath ASC
SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLsafe backup.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput03 = [dbo].[CommandExecute] @Command = @CurrentCommand03, @CommandType = @CurrentCommandType03, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput03 = @Error
IF @CurrentCommandOutput03 <> 0 SET @ReturnCode = @CurrentCommandOutput03
END
-- Delete old backup files
IF (@CurrentCommandOutput02 = 0 AND @Verify = 'N' AND @CurrentCleanupDate IS NOT NULL)
OR (@CurrentCommandOutput02 = 0 AND @Verify = 'Y' AND @CurrentCommandOutput03 = 0 AND @CurrentCleanupDate IS NOT NULL)
BEGIN
WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CleanupCompleted = 0)
BEGIN
SELECT TOP 1 @CurrentDirectoryID = ID,
@CurrentDirectoryPath = DirectoryPath
FROM @CurrentDirectories
WHERE CleanupCompleted = 0
ORDER BY ID ASC
IF @BackupSoftware IS NULL
BEGIN
SET @CurrentCommandType04 = 'xp_delete_file'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
END
IF @BackupSoftware = 'LITESPEED'
BEGIN
SET @CurrentCommandType04 = 'xp_slssqlmaint'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_slssqlmaint N''-MAINTDEL -DELFOLDER "' + REPLACE(@CurrentDirectoryPath,'''','''''') + '" -DELEXTENSION "' + @CurrentFileExtension + '" -DELUNIT "' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + '" -DELUNITTYPE "minutes" -DELUSEAGE'' IF @ReturnCode <> 0 RAISERROR(''Error deleting LiteSpeed backup files.'', 16, 1)'
END
IF @BackupSoftware = 'SQLBACKUP'
BEGIN
SET @CurrentCommandType04 = 'sqbutility'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqbutility 1032, N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''', N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + CASE WHEN @CurrentBackupType = 'FULL' THEN 'D' WHEN @CurrentBackupType = 'DIFF' THEN 'I' WHEN @CurrentBackupType = 'LOG' THEN 'L' END + ''', ''' + CAST(DATEDIFF(hh,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'h'', ' + ISNULL('''' + REPLACE(@EncryptionKey,'''','''''') + '''','NULL') + ' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLBackup backup files.'', 16, 1)'
END
IF @BackupSoftware = 'HYPERBAC'
BEGIN
SET @CurrentCommandType04 = 'xp_delete_file'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
END
IF @BackupSoftware = 'SQLSAFE'
BEGIN
SET @CurrentCommandType04 = 'xp_ss_delete'
SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_delete @filename = N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + '\*.' + @CurrentFileExtension + ''', @age = ''' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'Minutes'' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLsafe backup files.'', 16, 1)'
END
EXECUTE @CurrentCommandOutput04 = [dbo].[CommandExecute] @Command = @CurrentCommand04, @CommandType = @CurrentCommandType04, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
SET @Error = @@ERROR
IF @Error <> 0 SET @CurrentCommandOutput04 = @Error
IF @CurrentCommandOutput04 <> 0 SET @ReturnCode = @CurrentCommandOutput04
UPDATE @CurrentDirectories
SET CleanupCompleted = 1,
CleanupOutput = @CurrentCommandOutput04
WHERE ID = @CurrentDirectoryID
SET @CurrentDirectoryID = NULL
SET @CurrentDirectoryPath = NULL
SET @CurrentCommand04 = NULL
SET @CurrentCommandOutput04 = NULL
SET @CurrentCommandType04 = NULL
END
END
END
-- Update that the database is completed
UPDATE @tmpDatabases
SET Completed = 1
WHERE Selected = 1
AND Completed = 0
AND ID = @CurrentDBID
-- Clear variables
SET @CurrentDBID = NULL
SET @CurrentDatabaseID = NULL
SET @CurrentDatabaseName = NULL
SET @CurrentBackupType = NULL
SET @CurrentFileExtension = NULL
SET @CurrentFileNumber = NULL
SET @CurrentDifferentialBaseLSN = NULL
SET @CurrentDifferentialBaseIsSnapshot = NULL
SET @CurrentLogLSN = NULL
SET @CurrentLatestBackup = NULL
SET @CurrentDatabaseNameFS = NULL
SET @CurrentDatabaseType = NULL
SET @CurrentDate = NULL
SET @CurrentCleanupDate = NULL
SET @CurrentIsDatabaseAccessible = NULL
SET @CurrentAvailabilityGroup = NULL
SET @CurrentAvailabilityGroupRole = NULL
SET @CurrentIsPreferredBackupReplica = NULL
SET @CurrentDatabaseMirroringRole = NULL
SET @CurrentLogShippingRole = NULL
SET @CurrentCommand02 = NULL
SET @CurrentCommand03 = NULL
SET @CurrentCommandOutput02 = NULL
SET @CurrentCommandOutput03 = NULL
SET @CurrentCommandType02 = NULL
SET @CurrentCommandType03 = NULL
DELETE FROM @CurrentDirectories
DELETE FROM @CurrentFiles
END
--// Log completing information //--
Logging:
SET @EndMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120)
SET @EndMessage = REPLACE(@EndMessage,'%','%%')
RAISERROR(@EndMessage,10,1) WITH NOWAIT
IF @ReturnCode <> 0
BEGIN
RETURN @ReturnCode
END
END
GO
ALTER AUTHORIZATION ON [dbo].[DatabaseBackup] TO SCHEMA OWNER
GO
Diane -
Java is not active in the application server
Hi Experts
We recently installed CRM 5.0. Everything seems to have installed without any issues.
However, we are having a few issues the Java Virtual Machine (VMC).
When trying to access the VMC through ABAP side of CRM (SM53), it gives and error message that "Java is not active in the application server".
Eventhough everything seems to have been installed.
Any ideas on how to activate java.
Any help would be really appreciated.
Thanks
Imran KhanHi Daniele:
There are indeed only 3 parameter additions
vmcj/enable = on
vmcj/option/ps = 512M
vmcj/option/maxJavaHeap = 200M
The 4th one is just explanation for calculating sizes.
My VMC is active with only the above three settings.
Also make sure that the SP level for both the JAVA components and ABAP components is the same. i.e. they are both running on the latest version. The latest update was released in Late April.
If the SPs are from differnt releases, the VMC will not work.
Also, go into the server and have a look at the parameter file to make sure that settings are actually there. i have found out that settings in RZ10 and the real parameter settings can be different. Just make sure that the settings you want the system to take are indeed in the real parameter file.
I am not sure what else you can do...but rest assured that the thing works with the above mentioned settings.
Imran -
i can't activate my iphone . it says your iphone could not activated because the activation server is temporarily unavailable . can i activate leter???? or ....
IOS: Resolving activation messages
http://support.apple.com/kb/TS4242 -
Dear All,
After I upgrade ios4.1 to ios6.1.3 but my iphone 3gs shows the sentence below:
how to fix iphone could not activated because the activation server is temporarily unavailable
Please give me the ways to fix it
Thanks in advanceThi is usually a symptom that the phone has been hacked or jailbroken. Has it?
-
HT4623 my iPhone 3 gs could not activated because the activation server is temporarily
my iPhone 3 gs could not activated because the activation server is temporarily
<Personal Information Edited by Host>IOS: Resolving activation messages
http://support.apple.com/kb/TS4242 -
IPad constantly reboots every 2-3 minutes, after full recovery is not activated to wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately. IMEI 013311005943507. Help please! the official service Moscow representation FDA ipad offer to send in the U.S. for $ 500!
Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.
-
Paanu ba idelete ung Facebook sa settings? Kahit anong enter ko ng password ang Lumalabas ay could not communicate with the server.inan install ko na sya,pero andun prin sya sa settings.sa google chrome pa aq pumupunta para LNG maka log in.thanks.
-
I have a factory unlocked Iphone 4S, it worked fine but it was often lossing signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later, I have tried this for 3 days, any suggestions?
yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
no worries -
My phone can not activated because the activation server is temoporarily unavailable. i try activate on itunes but is not working.
Activation issues are typically the result of a device that has been hacked or jailbroken.
If that is the case, no support can be provided here. -
I deployed a Mountain Lion Server with the calendar service active. Every time a user tries to share a calendar they have created under thier account to an external person using thier email address, the server gives the following error: "At least one sharee was not recognized by the server. New invitations have not been sent."
Invites to share a calendar to OD accounts on the server seem to work fine.
I have a calendar specific email address for external invites set up. The server seems to send individual event invites to external email addresses just fine, so I am thinking the email is working. Email is not served on the Mountain Lion Server. The account is through Google Apps using IMAP and SMTP.
What's even stranger, is that there doesn't seem to be any message in the Calendar error logs.
I've tried creating a new test account and no luck.
I don't know what else to try.
Thanks in advance for any help!another 3rd party sofwtare that allows you opent he backup and grab info
http://www.processtext.com/abcblackberry.html
trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though
Maybe you are looking for
-
Maven Support for JE, testers needed!
Hello Berkeley DB Java Edition Fans and Developers! In an effort to better support our developers we've setup what we hope is a functional Maven repository, but we'd like you to test it and let us know if we've been successful or not. I've tried to t
-
Hardware: MacBook late 2009 (2.26Ghz Core 2 Duo 2 GB RAM 250GB HDD) running 10.9.4, Hackintosh MacPro (3.29Ghz i3 16GB RAM 1TB HDD) running 10.9.4, external 3 TB Seagate Backup+ drive As you can can see from the screenshot below, The external drive w
-
Issues printing on shared Windows printer
I'm trying to print on an HP LaserJet 1020 shared by a Windows XP computer. I shared the printer on XP, found it on the Mac, and added it as my default printer. (using the generic Postscript driver) When I hit Print on TextEdit, the document chugs fo
-
My iTunes gift card should have a balance but it keeps saying it has been redeemed
My iTunes gift card should have a balance, I keep getting amessage saying it has been redeemed. How do I find out the balance of the card?
-
WebDynpro development similar to WebDynpro of the portal SEARCH USER
I must realize the same application WebDynpro of the portal (ADMINISTRATION USER - > SEARCH USER. Where I can find the code of this WebDynpro?