Log_policy in OSB - Cannot find policies in WSDL

Hi,
I attached oracle/log_policy to a proxy service in OSB. When I clicked on debug icon to run the test the popup window display this error:
oracle.wsm.policymanager.PolicyManagerException: WSM-02133 : Cannot find policies in WSDL. [Possible Cause : WSM-02133 : Cannot find policies in WSDL.]
When I created the OSB domain, I refered to the MDS schema correctly.
Any help will be appreciated.

Hi,
I have applied oracle/wss_username_token_service_policy for my proxy service and trying to test that from OSB Test Console. I am getting below error,
"[OSB Security - OWSM:387253]Failed to initialize Owsm Credential Manager. Please validate the Keystore Configuration"
When i have launched Test Console for this proxy, i have observed in Security part, oracle/wss_username_token_client_policy is appearing. I am not sure why oracle/wss_username_token_client_policy is appearing there when i applied oracle/wss_username_token_service_policy to my proxy service.
Also do i have to need to configure any Keystore for oracle/wss_username_token_service_policy, If so please tell me the process.
If no key store is required where will the credentials be stored.
Also can you help in solving the error *"[OSB Security - OWSM:387253]Failed to initialize Owsm Credential Manager. Please validate the Keystore Configuration"*
Thanks
Rajesh

Similar Messages

Getting Error- Desktop\WSDL1\main.wsdl The system cannot find the path spec

Hai to every one !
iam using wsdl file which is downloaded "wsdlzip" file from wsnavigator to my desktop.
Extracted zip file .
i used main.wsdl file as adaptive webservice model in webdynpro application.
I developed application then iam not getting output , facing error like
java.io.FileNotFoundException: Desktop\WSDL1\main.wsdl (The system cannot find the path specified)
could any body help me on this.

Hi Eswar,
While importing WSDL using Adaptiver WS did you use the WS destinations. If yes, then did you create WS Destinations in the Visual Administrator?
You need to provide the url of the webservice in WSDestinations in Visual Administrator. It should be the url of the webservice in which the webservice is deployed and not the desktop URL.
the url will be like this
Ex: http://host:50000/OrderRequestForEBasis/Config1?wsdl
This url you can get by going to
http://host:port/wsnavigator in which server your webservice is located.
Thanks,
Gopi

faultstring Cannot find partner wsdl.

Hi ,
I am trying to initiate a web service deployed on a iAS_10g. I have generated a stub, in jdev 10.1.2,from the wsdl end point and am calling the service from the stub.
I am getting the following response:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.generalException</faultcode>
<faultstring>Cannot find partner wsdl.
parnterLink "hello" is not found in process "hello" (revision "1.0")
Please check the deployment descriptor of the process to find the correct partnerLink name.
; nested exception is:
ORABPEL-08021
Cannot find partner wsdl.
parnterLink "hello" is not found in process "hello" (revision "1.0")
Please check the deployment descriptor of the process to find the correct partnerLink name.
</faultstring>
<detail>
<ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">m001229</ns1:hostname>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
I have initiated the service and recieved a response successfully, when the same service is deployed on my local server oc4j_10g but not been able to do so for the remote server. Can you please shed some light on this issue?
Thank you for your time.
Regards,
Rev

Hi,
I have the same problem!
Could you please describe what you have done exactly to solve this problem?
Thanks a lot!
Regards,
Piotr

Cannot find OSB user name

A former colleague set up OSB on a server several months ago. Now I am trying to sign in the "file system backup and restore" area, and need the user name and password that was created. This must be a different user name than OSB Admin -- and of course it's not in our documentation for this server.
Is there a query or config file that might hold the user name? If not, what recourse do I have? Destroying OSB and rebuilding? It was a pain to get working in the first place. (OSB Express / Win2003 / internal DAT72 )
Thanks ...

Exception: Cannot find bean under name ...
Probable Cause: This is usually seen in association with a problematic Struts HTML SELECT custom tag. The Struts html:select tag behaves differently depending whether one or both of the name and property attributes is specified for its encompassed <html:options> tags. If the name attribute is specified, whether or not if the property attribute is specified, then a bean matching the specified name will be expected in some scope (such as page, request, session, or application). If the matching bean is not found in any available scope, the error above will be seen.
There are two ways to address this. The first approach is to put a bean in one of the scopes so that the html:options might be associated with it. The second approach is to not specify the name attribute and instead use only the property attribute.
Change your Frombean scope from "Request" to "Session", then it works.
Thanks,
Thagelapally

Cannot find entry 'SOAP_DOC_LITERAL' when import PublicReportService wsdl

Hi,
when i when import PublicReportService_v11.wsdl from BIP 10.1.3.4.2, i get the following error msg:
Cannot find entry 'SOAP_DOC_LITERAL' in the bounded picklist for the field 'Protocol' in integration component 'Repository Port'(SBL-EAI-
04401)
I want to integrate BI publisher for Siebel 8.1.1.6 to generate a report.
I followed the following references:
http://docs.oracle.com/cd/E14004_01/books/Reports/ReportsIntegrate6.html#wp575974
http://siebel-essentials.blogspot.com/2010/01/siebel-811x-and-bi-publisher-part-1.html#axzz1vaWerxQa
Thanks

Hi, WSeibel
I followed the steps Doc ID 1076412.1,
it said
This problem was solved after defining in the Mobile Client view -> field "Language(s)" the language ENU and the other one being used.
Then the database was re-extracted and it was possible to import the WSDL in the local database using Tools.
but my issue is not solved well.
I decide to reinstall Siebel Tools now, and have a try again.
Thanks,
Zhaoqiang

ORABPEL-08021 Cannot find partner wsdl.

Hi,
From java client I tried to call the "VacationRequest" demo application to initiate new process instance. I got the below error
Note: I can initiate from BPELConsole successfully.
Can you help me out to solve this?
I need to call it using Webservice from differnt m/c in same network. I depolyed simple webservice which I can call from the same client java program.
Regards,
Senthilkumar
==============
Please check the deployment descriptor of the process to find the correct partnerLink name.
] [faultActorURI=null] [DetailEntries=
[(0)=<ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">HASSATL-1621765</ns1:
hostname>]
] [FaultEntries=]] [Params={}]
06/01/24 22:44:01 WFAction.java [SOAPException: faultCode=soapenv:Server.generalException; msg=Cannot find partner wsdl.
parnterLink "VacationRequest" is not found in process "VacationRequest" (revision "1.0")
Please check the deployment descriptor of the process to find the correct partnerLink name.
; nested exception is:
ORABPEL-08021
Cannot find partner wsdl.
parnterLink "VacationRequest" is not found in process "VacationRequest" (revision "1.0")
Please check the deployment descriptor of the process to find the correct partnerLink name.
==============

I am getting same error.. here is the snippet from my domain.log
<2006-02-02 10:23:41,487> <DEBUG> <default.collaxa.cube.ws> <CXSOAPProvider::processBPELMessage> url: /default/MainFrameword/1.3/MainFrameword
<2006-02-02 10:23:41,487> <DEBUG> <default.collaxa.cube.ws> <CXSOAPProvider::processBPELMessage> soapAction: /orabpel
<2006-02-02 10:23:41,487> <DEBUG> <default.collaxa.cube.engine.deployment> <CubeProcessHolder::loadAndBind> Check if process MainFrameword, revision 1.3 needs to be reloaded
<2006-02-02 10:23:41,487> <DEBUG> <default.collaxa.cube.ws> <CXSOAPProvider::invoke> Error when process incoming message
ORABPEL-08021
Cannot find partner wsdl.
parnterLink "MainFrameword" is not found in process "MainFrameword" (revision "1.3")
Please check the deployment descriptor of the process to find the correct partnerLink name.
at com.collaxa.cube.ws.wsdl.WSDLManager.getPartnerWSDL(WSDLManager.java:335)
at com.collaxa.cube.ws.wsdl.WSDLManager.getPartnerWSDL(WSDLManager.java:317)
at com.collaxa.cube.ws.soap.providers.CXSOAPProvider.processBPELMessage(CXSOAPProvider.java:193)
at com.collaxa.cube.ws.soap.providers.CXSOAPProvider.invoke(CXSOAPProvider.java:119)
at org.collaxa.thirdparty.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.collaxa.thirdparty.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.collaxa.thirdparty.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.collaxa.thirdparty.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:450)
at org.collaxa.thirdparty.apache.axis.server.AxisServer.invoke(AxisServer.java:285)
at org.collaxa.thirdparty.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:653)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at org.collaxa.thirdparty.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:301)
at com.collaxa.cube.fe.CollaxaServlet.service(CollaxaServlet.java:134)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:798)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:211)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:127)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
at java.lang.Thread.run(Thread.java:534)
<2006-02-02 10:23:41,756> <DEBUG> <default.collaxa.cube.engine.dispatch> <Dispatcher::insert> Received no-op message
<2006-02-02 10:23:41,757> <DEBUG> <default.collaxa.cube.engine.dispatch> <Dispatcher::adjustThreadPool> Allocating 1 thread(s); pending threads: 1, active threads: 0, total: 799
<2006-02-02 10:23:41,757> <DEBUG> <default.collaxa.cube.engine.dispatch> <QueueConnectionPool::getConnection> Fetched a queue connection from pool java:comp/env/jms/collaxa/BPELWorkerQueueFactory, available connections=24, total connections=25
<2006-02-02 10:23:41,758> <DEBUG> <default.collaxa.cube.engine.dispatch> <DispatcherBean::send> Sent message to queue
<2006-02-02 10:23:41,758> <DEBUG> <default.collaxa.cube.engine.dispatch> <QueueConnectionPool::releaseConnection> Released queue connection to pool java:comp/env/jms/collaxa/BPELWorkerQueueFactory, available connections=25, total connections=25
<2006-02-02 10:23:41,759> <DEBUG> <default.collaxa.cube.engine.agents> <SimpleJob::execute> Sent message to dispatcher
<2006-02-02 10:23:41,759> <DEBUG> <default.collaxa.cube.engine.agents> <SimpleScheduler::schedule> Next activation time for agent dispatch: Thu Feb 02 10:25:41 EST 2006

Error cvc-elt.1: Cannot find the declaration of element 'wsdl:definitions'

Hi! Ive got an error: cvc-elt.1: Cannot find the declaration of element 'wsdl:definitions'
My WSDL file was generated by PI.
After import this WSDL-file to my Business Process to section Service Interfaces - I've got this error.
But, it seems to be OK when I created the project, create a model by choosing the WSDL-file. All validators do not give me any error.
Whats wrong?!

Though this is not my area, you can have a look at this thread which may help you
[Re: XML inputs in a MII transaction to be used as a Web Service call|XML inputs in a MII transaction to be used as a Web Service call;
thanks
G. Lakshmipathi

Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?

You can't do that.
And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music.

TS4062 I cannot find my IPOD touch listed on ITunes (there is no "Device" menu option - any advice?

I cannot find my IPOD touch listed on ITunes (there is no "Device" menu option in iTunes- any advice?). Using IPOD touch (32gb) and connecting with a laptop using Windows Vista. Downloaded the latest ITunes and it wiped all my music. I was able to recover the music purchased on Itunes (but not my CD downloads). I am having difficulty syncing my IPOD now and all of the help guides tell me that I need to use the "device" options to fix it but there is no "Device" options in my ITunes ribbon.

Just the old fashioned way, like if you lost your wallet.
Apple will not help.
If it is in your home and wifi is on and connected you can call it with FaceTime, Skype or other app that will play a notification sound and listen for it.
Report to police and change the passwords for all account used on the iPod

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

„The system cannot find the file specified. (Exception from HRESULT: 0x80070002)" - Error when trying to create an new controlled GPO

Hello,
we were planning to Upgrade from AGPM 4.0 to AGPM 4.0 SP2. The new AGPM should be placed on a new server. Additionally we created a new service account as the password of the old service account has been lost. We granted the new service account Full Rights
in "Domain Delegeation" and "Product Delegation", then stopped the AGPM Service on the old server.
On the new server AGPM was installed using the new service account, then the service was stopped and the archive was copied rom the old to the new server. The customer could edit policies, but not deploy them. Because of this, we changed back to the old
server, but copied the folders that were changed on the new server to keep them up to date.
Now creating a controlled Group Policy from a template causes the error
„The system cannot find the file specified. (Exception from HRESULT: 0x80070002). We tried several templates and even created new ones but the problem persists.
The following things do work:
- editing a controlled policy
- renaming a controlled policy
- check in/check out of a policy
- set a uncontrolled policy to controlled (needs to grant the serviceaccount Full rights to the policy before)
- deletion of a controlled policy
- creating a template from a policy
Thank you in advance for your help.

0x80070002 usually means that the source could not be found or located. Make sue that the FQDN path to your templates is the correct one as well as your DNS is
properly configured.
sharing some manuals @: http://1drv.ms/1kk6u6j

Patch 8557019 - /usr/bin/ld: cannot find -ldeb

Hi there,
I have upgraded an ebs system from 11-5-10-2-1 to r12 12.1.3 - I am in the process of patchiong reports and forms to latest version (10.1.2.3.1)
unfortunately one of the patches errors.
The system is on Linux x86-64
Here is what I did and what I experienced :-
cd /u03/oraupg/inst/apps/oraupg_findbupg/ora/10.1.2
sh oraupg_findbupg.env
linux32 bash
cd /u03/oraupg/apps/patches/10-1-2-patches/8557019
opatch apply
What I experienced :-
[applmgr@findbupg 8557019]$ opatch apply
Oracle Interim Patch Installer version 1.0.0.0.63
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : /u03/oraupg/apps/tech_st/10.1.2
Oracle Home Inventory : /u03/oraupg/apps/tech_st/10.1.2/inventory
Central Inventory : /u01/oracle/product/oraInventory
from : /etc/oraInst.loc
OUI location : /u03/oraupg/apps/tech_st/10.1.2/oui
OUI shared library : /u03/oraupg/apps/tech_st/10.1.2/oui/lib/linux/liboraInstaller.so
Java location : /u03/oraupg/apps/tech_st/10.1.2/jre/1.4.2/bin/java
Log file location : /u03/oraupg/apps/tech_st/10.1.2/.patch_storage/<patch ID>/*.log
Creating log file "/u03/oraupg/apps/tech_st/10.1.2/.patch_storage/8557019/Apply_8557019_05-31-2011_16-29-40.log"
Invoking fuser to check for active processes.
Provide your email address to be informed of security issues, install and
initiate Oracle Configuration Manager. Easier for you if you use your My
Oracle Support Email address/User Name.
Visit http://www.oracle.com/support/policies.html for details.
Email address/User Name:
You have not provided an email address for notification of security issues.
Do you wish to remain uninformed of security issues ([Y]es, [N]o) [N]: Yes
Oracle Configuration Manager has been installed but not configured. OCM enables
Oracle to provide superior, proactive support for our customers. Oracle
strongly recommends customers configure OCM. To complete the configuration of
OCM, refer to the OCM Installation and Administration Guide
(http://www.oracle.com/technology/documentation/ocm.html).
Backing up comps.xml ...
OPatch detected non-cluster Oracle Home from the inventory and will patch the local system only.
Please shut down Oracle instances running out of this ORACLE_HOME
(Oracle Home = /u03/oraupg/apps/tech_st/10.1.2)
Is this system ready for updating?
Please respond Y|N >
Y
Applying patch 8557019...
Patching archive files...
Running make for target install.
OPatch found the word "error" in stderr, please look into it.
You may have to run the make again.
Stderr Output (from /u03/oraupg/apps/tech_st/10.1.2/.patch_storage/8557019/make_local.stderr):
/usr/bin/ld: skipping incompatible /u03/oraupg/apps/tech_st/10.1.2/lib//libdeb.so when searching for -ldeb
/usr/bin/ld: skipping incompatible /u03/oraupg/apps/tech_st/10.1.2/lib//libdeb.a when searching for -ldeb
/usr/bin/ld: skipping incompatible /u03/oraupg/apps/tech_st/10.1.2/lib//libdeb.so when searching for -ldeb
/usr/bin/ld: skipping incompatible /u03/oraupg/apps/tech_st/10.1.2/lib//libdeb.a when searching for -ldeb
/usr/bin/ld: skipping incompatible /u03/oraupg/apps/tech_st/10.1.2/lib/libdeb.so when searching for -ldeb
/usr/bin/ld: skipping incompatible /u03/oraupg/apps/tech_st/10.1.2/lib/libdeb.a when searching for -ldeb
/usr/bin/ld: cannot find -ldeb
collect2: ld returned 1 exit status
make: *** [dejvm] Error 1
[email protected] - June 1, 2011 9:57:54 AM GMT+12:00 [Update from Customer]
OPatch encounters the following issues during Make:
There were problems running make commands. The errors encounted were:
Error for command: cd /u03/oraupg/apps/tech_st/10.1.2//procbuilder/lib
/usr/bin/make -f ins_procbuilder.mk install ORACLE_HOME="/u03/oraupg/apps/tech_st/10.1.2" 2>/u03/oraupg/apps/tech_st/10.1.2/.patch_storage/8557019/make_local.stderr
Replying 'Y' will terminate the patch installation immediately.It WILL NOT restore any updates that have been performed to this point. It WILL NOT update the inventory.
Replying 'N' will continue with updating the inventory showing the patch has been applied.
NOTE: After replying either 'Y' or 'N' it is critical to review:
My Oracle Support Note 312767.1 How to rollback a failed Interim patch installation.
Do you want to STOP?
Please respond Y|N >
Y
Make Error!
ERROR: OPatch failed during patching, possibly due to missing files.
[applmgr@findbupg 8557019]$
Welcome advice re how to fix this problem - thanks to all who have helped me in the past.
cheers, Rob

Hello Diesel,
As per Note 1266729.1 : "Applying Patch 8557019 and encounter /usr/bin/ld: cannot find -ldeb error running make -f ins_procbuilder.mk install" this can be fixed by appying patch 8551790 first.
Regards, Carlo.

Java Studio Enterprise 8.1 and jdk1.6 - cannot find symbol

Hi,
I am using subj. The problem I have is that I declared 2-3 classes with methods in one package. I made an object of the class and use intellisense to navigate to the method I need but when I try to compile the code I have "cannot find symbol" error on the method I intellisensed to. It seems to me that it is IDE problem.
Does anyone know how to work around it?
The code is below, in case you are interested.
package webservice;
import java.io.*;
public class Main {
/** Creates a new instance of Main */
public Main() {
* @param args the command line arguments
public static void main(String[] args) {
String filename = null;
String timestamp = null;
try {
Q q = new Q();
timestamp = "2007-06-01";
QList ql = q.getList(timestamp);
System.out.println("--------------Ok-------------");
catch(Exception e) {
System.out.println("An Exception thrown in Main(). e = "+e.toString());
package webservice;
public class Q {
public Q() {
public QList getList(String timestamp) {
QList result = null;
return result;
Thanks,
Dmitry

Thanks for that Kris.
I found the root of my problem. In this example I used a remote webservice to retrieve some data. It happened to be that the generated class file from wsdl and my custom class had the same name.
So, instead of reporting as ambiguous definition error the ide picked up the wrong class and did not find the method I intended to use.
Hopefully it will help someone else having the same problem.
Dmitry

Cannot find binding operation definition based on wsaAction='null'

I'm using correlation sets to invoke an axis service asynchronously. I understand that, in this way, passing ws-addressing headers (replyTo, messageId, etc) is not required. However, the generated process' WSDL contains:
<binding name="FlightCallbackPortTypeBinding" type="tns:FlightCallbackPortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="flightServiceCallback">
<soap:operation style="document" soapAction="flightServiceCallback"/>
<input>
<soap:header message="tns:WSARelatesToHeader" part="RelatesTo" use="literal" encodingStyle=""/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
When Axis calls back, it sends the message:
POST /orabpel/default/process_wsba/1.0 HTTP/1.0
Content-Type: text/xml; charset=utf-8
User-Agent: Axis/1.3
Host: localhost:8088
SOAPAction: "flightServiceCallback"
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Header>
<nsl:RelatesTo soapenv:actor="http://schemas.xmlsoap.org/soap/actor/next" soapenv:mustUnderstand="0" xmlns:nsl="http://schemas.xmlsoap.org/ws/2003/03/addressing">dummyValue</nsl:RelatesTo>
</soapenv:Header>
<soapenv:Body>
<transactionID xsi:type="xsd:string" xmlns="">fe80:0:0:0:207:e9ff:fe44:b4f8:1150081262615 (correlation token)</transactionID>
<price xsi:type="xsd:int" xmlns="">4</price>
</soapenv:Body>
</soapenv:Envelope>
However, I get the error message:
<faultcode>soapenv:Server.generalException</faultcode>
<faultstring>Cannot find binding operation definition based on wsaAction='null', and soapAction='flightServiceCallback' in http://cali:9700/orabpel/default/process_wsba/1.0/_process_wsba.wsdl</faultstring>
<detail>
<ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">cali</ns1:hostname>
</detail>
1) What's missing in my callback?
2) Do I need to bother about the wsa header even using correlationSets?
Thank in advance,
Ivan

I have an urgent need for a Sr, Oracle BPEL Developer in the Dallas Texas area. With this position, you can interview and start immediately. If you are interested or know of anyone looking please send my way.
Warm regards,
Kim Dobson
Sr. Account Manager
Eventus Group Technology Resources
10100 N. Central Expressway
Suite 150
Dallas, TX 75231
Office 469.916.4857
Mobile 214.277.2097
Fax 469.916.3861
[email protected]

JAX-WS web service - "Cannot find dispatch method"

I'm getting the same error response every time I send a request to my JAX-WS web service:
<ns2:Fault xmlns:ns2="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns3="http://www.w3.org/2003/05/soap-envelope">
   <faultcode>ns2:Client</faultcode>
   <faultstring>Cannot find dispatch method for {http://www.w3.org/2003/05/soap-envelope}Envelope</faultstring>
</ns2:Fault>I've tried using JAX-WS RI 2.1.7 and 2.2 on my Tomcat server, but both return the same error response. It will return the WSDL just fine (when "?wsdl" is appended to the endpoint URL). I used "wsimport" to generate the necessary Java classes from my WSDL--it used JAX-WS RI 2.1.6 (the one included with the JDK I guess) to generate the Java source files.
Other people online have had similar problems, but never with the SOAP element "{http://www.w3.org/2003/05/soap-envelope}Envelope", always with things specific to their WSDLs like "{}reqParams" or "{http://www.telekom.at/eai/WSToCramerCSIRead}CSIRead". I set a debug breakpoint at the start of my SIB method and it doesn't even get that far.
Any ideas? Thanks for your help.
WSDL:
<?xml version="1.0" encoding="utf-8"?>

<definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ihe="urn:ihe:iti:xds-b:2007" xmlns:iherad="urn:ihe:rad:xdsi-b:2009" xmlns:rs="urn:oasis:names:tc:ebxml-regrep:xsd:rs:3.0"
targetNamespace="urn:ihe:rad:xdsi-b:2009" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" name="ImagingDocumentSource">
<documentation>IHE XDS-I.b Imaging Document Source</documentation>
<types>
    <xsd:schema elementFormDefault="qualified"
      targetNamespace="urn:ihe:iti:xds-b:2007"
      xmlns:ihe="urn:ihe:iti:xds-b:2007">
      
      <xsd:include schemaLocation="../schema/IHE/XDS.b_DocumentRepository.xsd"/>
    </xsd:schema>
    <xsd:schema elementFormDefault="qualified"
      targetNamespace="urn:ihe:rad:xdsi-b:2009"
      xmlns:ihe="urn:ihe:iti:xds-b:2007"
      xmlns:iherad="urn:ihe:rad:xdsi-b:2009">
      
      <xsd:include schemaLocation="../schema/IHE/XDSI.b_ImagingDocumentSource.xsd"/>
    </xsd:schema>
    <xsd:schema elementFormDefault="qualified"
      targetNamespace="urn:oasis:names:tc:ebxml-regrep:xsd:rs:3.0"
      xmlns:rs="urn:oasis:names:tc:ebxml-regrep:xsd:rs:3.0">
      
      <xsd:include schemaLocation="../schema/ebRS/rs.xsd"/>
    </xsd:schema>
    
    <xsd:schema elementFormDefault="qualified"
      targetNamespace="urn:oasis:names:tc:ebxml-regrep:xsd:lcm:3.0"
      xmlns:lcm="urn:oasis:names:tc:ebxml-regrep:xsd:lcm:3.0">
      
      <xsd:include schemaLocation="../schema/ebRS/lcm.xsd"/>
    </xsd:schema>
   <xsd:schema elementFormDefault="qualified"
      targetNamespace="urn:oasis:names:tc:ebxml-regrep:xsd:rim:3.0"
      xmlns:lcm="urn:oasis:names:tc:ebxml-regrep:xsd:rim:3.0">
      
      <xsd:include schemaLocation="../schema/ebRS/rim.xsd"/>
    </xsd:schema>
</types>
<message name="RetrieveImagingDocumentSetRequest_Message">
    <documentation>Retrieve Imaging Document Set</documentation>
    <part name="body" element="iherad:RetrieveImagingDocumentSetRequest"/>
</message>
<message name="RetrieveDocumentSetResponse_Message">
    <documentation>Retrieve Document Set Response</documentation>
    <part name="body" element="ihe:RetrieveDocumentSetResponse"/>
</message>
<portType name="ImagingDocumentSource_PortType">
    <operation name="ImagingDocumentSource_RetrieveImagingDocumentSet">
      <input message="iherad:RetrieveImagingDocumentSetRequest_Message"
        wsaw:Action="urn:ihe:rad:xdsi-b:2009:RetrieveImagingDocumentSet"/>
      <output message="iherad:RetrieveDocumentSetResponse_Message"
        wsaw:Action="urn:ihe:iti:2007:RetrieveDocumentSetResponse"/>
    </operation>
</portType>
<binding name="ImagingDocumentSource_Binding" type="iherad:ImagingDocumentSource_PortType">
    <soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <operation name="ImagingDocumentSource_RetrieveImagingDocumentSet">
      <soap12:operation soapAction="urn:ihe:rad:xdsi-b:2009:RetrieveImagingDocumentSet"/>
      <input>
        <soap12:body use="literal"/>
      </input>
      <output>
        <soap12:body use="literal"/>
      </output>
    </operation>
</binding>
<service name="ImagingDocumentSource_Service">
    <port name="ImagingDocumentSource_Port_Soap12" binding="iherad:ImagingDocumentSource_Binding">
      <soap12:address location="http://localhost:8080/webservice-test/ridsService"/>
    </port>
</service>
</definitions>
Request:
<soap:Envelope
xmlns:soap="http://www.w3.org/2003/05/soap-envelope"
xmlns:urn="urn:ihe:rad:xdsi-b:2009"
xmlns:urn1="urn:ihe:iti:xds-b:2007"
xmlns:a="http://www.w3.org/2005/08/addressing">
   <soap:Header>
     <a:Action soap:mustUnderstand="1">urn:ihe:rad:2009:RetrieveImagingDocumentSet</a:Action>
     <a:MessageID>urn:uuid:0fbfdced-6c01-4d09-a110-2201afedaa02</a:MessageID>
     <a:ReplyTo soap:mustUnderstand="1">
          <a:Address>http://www.w3.org/2005/08/addressing/anonymous</a:Address>
     </a:ReplyTo>
     <a:To>http://localhost:8080/webservice-test/ridsServer</a:To>
   </soap:Header>
   <soap:Body>
      <urn:RetrieveImagingDocumentSetRequest>
         
         <urn:StudyRequest studyInstanceUID="test1">
            
            <urn:SeriesRequest seriesInstanceUID="test2">
               
               <urn1:DocumentRequest>
                  
                  <urn1:HomeCommunityId>test3</urn1:HomeCommunityId>
                  <urn1:RepositoryUniqueId>test4</urn1:RepositoryUniqueId>
                  <urn1:DocumentUniqueId>test5</urn1:DocumentUniqueId>
               </urn1:DocumentRequest>
            </urn:SeriesRequest>
         </urn:StudyRequest>
         <urn:TransferSyntaxUIDList>
            
            <urn:TransferSyntaxUID>?</urn:TransferSyntaxUID>
         </urn:TransferSyntaxUIDList>
      </urn:RetrieveImagingDocumentSetRequest>
   </soap:Body>
</soap:Envelope>
Response (HTTP 500):
<ns2:Fault xmlns:ns2="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns3="http://www.w3.org/2003/05/soap-envelope">
   <faultcode>ns2:Client</faultcode>
   <faultstring>Cannot find dispatch method for {http://www.w3.org/2003/05/soap-envelope}Envelope</faultstring>
</ns2:Fault>

I posted here to benefit anybody who is looking for a solution.
The solution is to use WebServiceContext to get ServletContext, then use ServletContext to get parameters defined in web.xml.
@Resource private WebServiceContext m_wsCxt;
Then in method
SOAPMessageContext soapCxt = (SOAPMessageContext) m_wsCxt.getMessageContext();
ServletContext servletCxt = (ServletContext) soapCxt.get(javax.xml.ws.handler.MessageContext.SERVLET_CONTEXT);
}

Log_policy in OSB - Cannot find policies in WSDL

Similar Messages

Maybe you are looking for