Log Transport Stalled

Got a strange one.
We switched over from Site A to Site B yesterday and have experienced some network drop out.
I left the DB up to date yesterday at about 3pm and shipping with no problem.
Had some more network drop out and when I checked it at 2pm today it had missed a number of files.
While I was monitoring FAL kicked in and started transmitting files. Great and it applied 2 file fine. As it was transmitting the 3rd we must have had another net work drop out as it didn;t complete and apply.
Now the database thinks this logfile 270 is in transit. It is receiving other files after wards no problem but FAL will not kick in.
I have restarted the MRP but still nothing.
I have stopped it and tried to recover automatic standby database but this is fails with
ORA-16145: archival for thread# 1 sequence# 544270 in progress
I can not force oracle to take the file that is there or kick fal off again.
We are using DataGuard on 11.2.0.2. Snippet of end of Archive log below
Attempt to start background Managed Standby Recovery process (mss01)
MRP0 started with pid=36, OS id=22005
MRP0: Background Managed Standby Recovery process started (mss01)
2011-11-27 17:20:33.752000 +00:00
started logmerger process
Managed Standby Recovery starting Real Time Apply
Parallel Media Recovery started with 4 slaves
Waiting for all non-current ORLs to be archived...
All non-current ORLs have been archived.
Media Recovery Waiting for thread 1 sequence 544270 (in transit)
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE THROUGH ALL SWITCHOVER DISCONNECT USING CURRENT LOGFILE
2011-11-27 17:20:52.434000 +00:00
Archived Log entry 1034639 added for thread 1 sequence 544698 rlc 699789824 ID 0xcbc6a648 dest 2:
RFS[403]: No standby redo logfiles available for thread 1
RFS[403]: Opened log for thread 1 sequence 544701 dbid -944432704 branch 699789824
2011-11-27 17:23:04.732000 +00:00
Archived Log entry 1034640 added for thread 1 sequence 544662 rlc 699789824 ID 0xcbc6a648 dest 2:
RFS[406]: No standby redo logfiles available for thread 1
RFS[406]: Opened log for thread 1 sequence 544663 dbid -944432704 branch 699789824
2011-11-27 17:23:07.448000 +00:00
Archived Log entry 1034641 added for thread 1 sequence 544701 rlc 699789824 ID 0xcbc6a648 dest 2:
RFS[403]: No standby redo logfiles available for thread 1
RFS[403]: Opened log for thread 1 sequence 544706 dbid -944432704 branch 699789824
2011-11-27 17:23:16.004000 +00:00
Archived Log entry 1034642 added for thread 1 sequence 544661 rlc 699789824 ID 0xcbc6a648 dest 2:
RFS[405]: No standby redo logfiles available for thread 1
RFS[405]: Opened log for thread 1 sequence 544664 dbid -944432704 branch 699789824
2011-11-27 17:24:14.322000 +00:00
Archived Log entry 1034643 added for thread 1 sequence 544706 rlc 699789824 ID 0xcbc6a648 dest 2:
RFS[403]: No standby redo logfiles available for thread 1
RFS[403]: Opened log for thread 1 sequence 544709 dbid -944432704 branch 699789824
And so it continues catching up Archive logs it knows it has not shipped.
select * from v$archive_gap; is showing the gap but as you can see Oracle is stuck thinking it is in progress.
Anyone got any suggestions?
I have a call with Oracle raised but thought I would also throw it out there to the community.

Scratch that.
By the time I had finished typing the message the network seems to have kicked in and all of a sudden it started transmitting the file I needed and seems to have kicked in again.
It seems to just be very very lagged.
Think I will need to get onto the network guys and investigate tomorrow to get some consitency in the network as it can keep up as long as the network does not drop.

Similar Messages

Unable to update Prelude CC. Get Error ' Close the following application - log transport'

This is happening when I'm using the CC admin program to install the update. The download of the update begins, and once the install starts, I get an error that says:
Close the following application 'log transport (logtransport2.exe)'- I can either close or retry.
How do I close this application - logtransport2.exe?

Hi Bhorv67,
Please refer the following forum thread on same problem "Close the following application 'log transport (logtransport2.exe)''
http://forums.adobe.com/message/5832570#5832570
Hope this helps.
Regards,
Sumit Singh

V$DATAGUARD_STATUS - Log Transport Services Warning

Hello gurus,
OS read hat, oracle enterprise edition 11g release 2, dataguard 2 physical standby's
everything works fine but since 1 day we get following warnings from dataguard on the primary server:
SELECT * FROM V$DATAGUARD_STATUS;
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAM
MESSAGE
Log Transport Services Warning 0 309911 0 NO 01.11.12
RTC returned 2, disabling RTC for next 2 I/Os.
does anybody know this warning message?
in the alert log it looks like this:
RTC returned 2, disabling RTC for next 2 I/Os.
Thu Nov 01 12:09:46 2012
RTC returned 2, disabling RTC for next 2 I/Os.
Re-enabling RTC following backoff interval 2.
Re-enabling RTC following backoff interval 2.
RTC returned 2, disabling RTC for next 2 I/Os.
RTC returned 2, disabling RTC for next 2 I/Os.
Re-enabling RTC following backoff interval 2.
Re-enabling RTC following backoff interval 2.
Thu Nov 01 12:11:16 2012
RTC returned 2, disabling RTC for next 2 I/Os.
Re-enabling RTC following backoff interval 2.
thanks in advance

Hello;
It might be this :
Bug 9869401 - Unwanted ".. RTC .." messages in alert log if COMPRESSION enabled on LOG_ARCHIVE_DEST_n [ID 9869401.8]
Best Regards
mseberg

Dataguard Log Transport Services Warning

Please, explain me. What mind Warning on Primary Server
SELECT a.facility, a.severity, a.ERROR_CODE, a.MESSAGE
FROM v_$dataguard_status a
where a.facility = 'Log Transport Services'
and a.severity = 'Warning';
result
FACILITY SEVERITY ERROR_CODE
MESSAGE
Log Transport Services Warning 0
LNS: Standby redo logfile selected for thread 1 sequence 136 for destination LOG_ARCHIVE_DEST_2
Log Transport Services Warning 0
ARC0: Standby redo logfile selected for thread 1 sequence 135 for destination LOG_ARCHIVE_DEST_2

In alertlog on Primary only message like :
Fri Jun 20 16:08:11 2008
LNS: Standby redo logfile selected for thread 1 sequence 146 for destination LOG_ARCHIVE_DEST_2
Fri Jun 20 16:08:12 2008
Thread 1 advanced to log sequence 147 (LGWR switch)
Current log# 3 seq# 147 mem# 0: /ora/oradata/testmain/redo31.log
Current log# 3 seq# 147 mem# 1: /ora/oradata/testmain/redo32.log
Fri Jun 20 16:08:12 2008
LNS: Standby redo logfile selected for thread 1 sequence 147 for destination LOG_ARCHIVE_DEST_2
Fri Jun 20 16:08:13 2008
Thread 1 advanced to log sequence 148 (LGWR switch)
Current log# 1 seq# 148 mem# 0: /ora/oradata/testmain/redo11.log
Current log# 1 seq# 148 mem# 1: /ora/oradata/testmain/redo12.log
and alert log Standby like:
Fri Jun 20 16:06:29 2008
Recovery of Online Redo Log: Thread 1 Group 5 Seq 145 Reading mem 0
Mem# 0: /ora/oradata/maintest/redo51std.log
Mem# 1: /ora/oradata/maintest/redo52std.log
Fri Jun 20 16:08:11 2008
Primary database is in MAXIMUM PERFORMANCE mode
RFS[1]: Successfully opened standby log 4: '/ora/oradata/maintest/redo41std.log'
Fri Jun 20 16:08:11 2008
Media Recovery Waiting for thread 1 sequence 146 (in transit)
Fri Jun 20 16:08:11 2008
Recovery of Online Redo Log: Thread 1 Group 4 Seq 146 Reading mem 0
Mem# 0: /ora/oradata/maintest/redo41std.log
Mem# 1: /ora/oradata/maintest/redo42std.log
I think that all work property. But I do not understand why message Warning?

PreludeCC and PRemiere Pro CC will not update error: " log Transport 2"

PreludeCC and PRemiere Pro CC will not update . update gets to 62% and then quits with the following error code "Log Transport 2"
System
OS 10.9
MacPro 3,1
All other apps do update.

HI Steve & Perry,
Have you tried restarting the machine and applying the updates again ? If yes, are you still getting the same error message ? If yes , could you please share a screen shot of the error that you get ?
Cheers,
Kartikay Sharma

Log transport failing to standby host , target using ASM.

Hi,
Please help me in the following scenario. I have two nodes ASM1 & ASM2 with RHEL4 U5 OS. On node ASM1 there is database ORCL using ASM diskgroups DATA & RECOVER and archive location is on '+RECOVER/orcl/'. On ASM2 node, I have to configure STDBYORCL (standby) database without ASM (i.e. on FS). I have taken the copy of database ORCL via RMAN, using following command:
run{
copy datafile 1 to '/opt/oracle/admin/df1.dbf';
copy datafile 2 to '/opt/oracle/admin/df2.dbf';
copy datafile 3 to '/opt/oracle/admin/df3.dbf';
copy datafile 4 to '/opt/oracle/admin/df4.dbf';
copy current controlfile for standby to '/opt/oracle/admin/stdbyorcl_control01.ctl'
Then I have ftp'd all to ASM2 and put them on FS /u01/oradata. Have made all necessary changes in primary and standby database pfile and then mount the standby database and put it in managed recovery mode. Unfortunately, log transport service is not working and archives are not getting shipped to standby host.
Here are all configuration details.
Primary database ORCL pfile:
[oracle@asm dbs]$ more initorcl.ora
stdbyorcl.__db_cache_size=251658240
orcl.__db_cache_size=226492416
stdbyorcl.__java_pool_size=4194304
orcl.__java_pool_size=4194304
stdbyorcl.__large_pool_size=4194304
orcl.__large_pool_size=4194304
stdbyorcl.__shared_pool_size=100663296
orcl.__shared_pool_size=125829120
stdbyorcl.__streams_pool_size=0
orcl.__streams_pool_size=0
*.audit_file_dest='/opt/oracle/admin/orcl/adump'
*.background_dump_dest='/opt/oracle/admin/orcl/bdump'
*.compatible='10.2.0.1.0'
*.control_files='+DATA/orcl/controlfile/current.270.665007729','+RECOVER/orcl/controlfile/current.262.665007731'
*.core_dump_dest='/opt/oracle/admin/orcl/cdump'
*.db_block_size=8192
*.db_create_file_dest='+DATA'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='orcl'
*.db_recovery_file_dest='+RECOVER'
*.db_recovery_file_dest_size=3163553792
*.db_unique_name='ORCL'
*.fal_client='ORCL'
*.fal_server='STDBYORCL'
*.instance_name='orcl'
*.job_queue_processes=10
*.log_archive_config='dg_config=(orcl,stdbyorcl)'
*.log_archive_dest_1='LOCATION=+RECOVER/orcl/'
*.log_archive_dest_2='SERVICE=stdbyorcl'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_format='%t_%s_%r.dbf'
*.open_cursors=300
*.pga_aggregate_target=121634816
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=364904448
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS'
*.user_dump_dest='/opt/oracle/admin/orcl/udump'
Standby database STDBYORCL pfile:
[oracle@asm2 dbs]$ more initstdbyorcl.ora
stdbyorcl.__db_cache_size=251658240
stdbyorcl.__java_pool_size=4194304
stdbyorcl.__large_pool_size=4194304
stdbyorcl.__shared_pool_size=100663296
stdbyorcl.__streams_pool_size=0
*.audit_file_dest='/opt/oracle/admin/stdbyorcl/adump'
*.background_dump_dest='/opt/oracle/admin/stdbyorcl/bdump'
*.compatible='10.2.0.1.0'
*.control_files='u01/oradata/stdbyorcl_control01.ctl'#Restore Controlfile
*.core_dump_dest='/opt/oracle/admin/stdbyorcl/cdump'
*.db_block_size=8192
*.db_create_file_dest='/u01/oradata'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='orcl'
*.db_recovery_file_dest='/u01/oradata/backup'
*.db_recovery_file_dest_size=3163553792
*.db_unique_name='STDBYORCL'
*.fal_client='STDBYORCL'
*.fal_server='ORCL'
*.instance_name='stdbyorcl'
*.job_queue_processes=10
*.log_archive_config='dg_config=(orcl,stdbyorcl)'
*.log_archive_dest_1='LOCATION=/u01/oradata/archive'
*.log_archive_dest_2='SERVICE=orcl'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_format='%t_%s_%r.dbf'
*.log_archive_start=TRUE
*.open_cursors=300
*.pga_aggregate_target=121634816
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=364904448
*.standby_archive_dest='LOCATION=/u01/oradata/archive'
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS'
*.user_dump_dest='/opt/oracle/admin/stdbyorcl/udump'
db_file_name_convert=('+DATA/ORCL/DATAFILE','/u01/oradata','+RECOVER/ORCL/DATAFILE','/u01/oradata')
log_file_name_convert=('+DATA/ORCL/ONLINELOG','/u01/oradata','+RECOVER/ORCL/ONLINELOG','/u01/oradata')
Have configured the tns service on both the hosts and its working absolutely fine.
ASM1
=====
[oracle@asm dbs]$ tnsping stdbyorcl
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 19-SEP-2008 18:49:00
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.20)(PORT = 1521))) (CONNECT_DATA = (SID = stdbyorcl) (SERVER = DEDICATED)))
OK (30 msec)
ASM2
=====
[oracle@asm2 archive]$ tnsping orcl
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 19-SEP-2008 18:48:39
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.10)(PORT = 1521))) (CONNECT_DATA = (SID = orcl) (SERVER = DEDICATED)))
OK (30 msec)
Please guide where I am missing. Thanking you in anticipation.
Regards,
Ravish Garg
(Oracle DBA)

As Anvar said, check your primary db's alert log what error message you get...
I am wondering you need this in your standby parameter file?..
*.log_archive_dest_2='SERVICE=orcl'
*.log_archive_dest_state_2='ENABLE'

How to set at the server level to log transport request in SAP ME

Hi:
when I do configuration in SAP ME, can I set at the system level to log for transport request ?
so I can use transport request for other client or server.

Hi!
There is no "transport request" in SAP ME, however, there is Configuration Data Transfer Export/Import activity which can export the data to ZIP file at the source site and then import that file at the destination site.
CDT activity can utilize CTS+ as a transport channel but I would suggest ZIP file instead because the file can be edited manually in case of any issue or if you want to remove some data.
For details, please consult this How-To Guide.
Regards,
Sergiy

Transport stalled

HI,,
Request was transported a week back but still the request is showing import running(truck symbol). please suggest how to solve this issue.

Hello Venkateshwarlu,
Check import monitor for the queue of the target system.Check if something is in errors and struck.If thats the case check if you have any unreleased Transports with some system objects and if so release them and then delete the CTS in import monitor.Go to the STMS queue and reimport all the CTS which were in with truck symbol.
Also if there is any problem with the background job check through SM37 if there are any failed jobs related to transports and if such check the logs of those jobs specialy RDDIMPDP.
**Reward points accordingly

Log Transport Application stopped working

I've been getting this every time I close Premiere in Adobe CS4. I thought it was a Vista issue but their Tech Support stated that it's an Adobe problem. Any idea what this means and if there's a way to fix it?
Thanks.

I did as suggested and checked 'No' to the Adobe snooping option in Premiere but the problem came back.
Later I found that acrobat reader had a different screen and this option was still set to yes.
How many different places is this in and how do you make sure you get them all?
Only Adobe could include a problem logger that causes problems.

Change Request Logging Mechanism (The Transports)

Our functional guys log transport in excel sheet and there team lead approve them. Basis guys import in the respective system. With the time excel sheet became dirty, messy couldn't able to control. Anyone know any other tools which is web enable with email triggering system. With Authorization etc. Any input is appreciated.
Thanks,
Mike

Hi,
Good evening and greetings,
If you have Lotus Notes then it a database can be created and triggered through workflow mechanism.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Logs are not getting applied in the standby database

Hello,
I have created a physical standby database and in it the logs are not getting applied..
following is an extract of the standby alert log
Wed Sep 05 07:53:59 2012
Media Recovery Log /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc
Error opening /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc
Attempting refetch
Media Recovery Waiting for thread 1 sequence 37638
Fetching gap sequence in thread 1, gap sequence 37638-37643
Wed Sep 05 07:53:59 2012
RFS[46]: Assigned to RFS process 3081
RFS[46]: Allowing overwrite of partial archivelog for thread 1 sequence 37638
RFS[46]: Opened log for thread 1 sequence *37638* dbid 1723205832 branch 765704228
Wed Sep 05 07:55:34 2012
RFS[42]: Possible network disconnect with primary database
However, the archived files are getting copied to the standby server.
I tried registering and recovering the logs but it also failed..
Follows some of the information,
Primary
Oralce 11R2 EE
SQL> select max(sequence#) from v$log where archived='YES';
MAX(SEQUENCE#)
37668
SQL> select DEST_NAME, RECOVERY_MODE,DESTINATION,ARCHIVED_SEQ#,APPLIED_SEQ#, SYNCHRONIZATION_STATUS,SYNCHRONIZED,GAP_STATUS from v$archive_dest_status where DEST_NAME = 'LOG_ARCHIVE_DEST_3';
DEST_NAME RECOVERY_MODE DESTINATION ARCHIVED_SEQ# APPLIED_SEQ# SYNCHRONIZATION_STATUS SYNCHRONIZED GAP_STATUS
LOG_ARCHIVE_DEST_3 MANAGED REAL TIME APPLY ABC 37356 0 CHECK CONFIGURATION NO RESOLVABLE GAP
Standby
Oralce 11R2 EE
SQL> select max(sequence#) from v$archived_log where applied='YES';
MAX(SEQUENCE#)
37637
SQL> select * from v$archive_gap;
no rows selected
SQL> select open_mode, database_role from v$database;
OPEN_MODE DATABASE_ROLE
READ ONLY WITH APPLY PHYSICAL STANDBY
Please help me to troubleshoot this and get the standby in sync..
Thanks a lot..

the results are as follows..
SQL> select process, status, group#, thread#, sequence# from v$managed_standby order by process, group#, thread#, sequence#;
PROCESS STATUS GROUP# THREAD# SEQUENCE#
ARCH CLOSING 1 1 37644
ARCH CLOSING 1 1 37659
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
MRP0 WAIT_FOR_GAP N/A 1 37638
RFS IDLE N/A 0 0
RFS IDLE N/A 0 0
RFS IDLE N/A 0 0
RFS RECEIVING N/A 1 37638
RFS RECEIVING N/A 1 37639
RFS RECEIVING N/A 1 37640
RFS RECEIVING N/A 1 37641
RFS RECEIVING N/A 1 37642
RFS RECEIVING N/A 1 37655
RFS RECEIVING N/A 1 37673
RFS RECEIVING N/A 1 37675
42 rows selected.
SQL>
SQL> select name,value, time_computed from v$dataguard_stats;
NAME VALUE TIME_COMPUTED
transport lag +00 02:44:33 09/05/2012 09:25:58
apply lag +00 03:14:30 09/05/2012 09:25:58
apply finish time +00 00:01:09.974 09/05/2012 09:25:58
estimated startup time 12 09/05/2012 09:25:58
SQL> select timestamp , facility, dest_id, message_num, error_code, message from v$dataguard_status order by timestamp
TIMESTAMP FACILITY DEST_ID MESSAGE_NUM ERROR_CODE MESSAGE
05-SEP-12 Remote File Server 0 60 0 RFS[13]: Assigned to RFS process 2792
05-SEP-12 Remote File Server 0 59 0 RFS[12]: Assigned to RFS process 2790
05-SEP-12 Log Apply Services 0 61 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 62 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 63 0 Managed Standby Recovery Canceled
05-SEP-12 Log Apply Services 0 64 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 65 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 66 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 67 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 68 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 69 0 RFS[5]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 70 0 RFS[6]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 71 0 RFS[14]: Assigned to RFS process 2829
05-SEP-12 Remote File Server 0 72 0 RFS[15]: Assigned to RFS process 2831
05-SEP-12 Network Services 0 73 0 RFS[9]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 74 0 RFS[16]: Assigned to RFS process 2833
05-SEP-12 Network Services 0 75 0 RFS[1]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 76 0 RFS[17]: Assigned to RFS process 2837
05-SEP-12 Network Services 0 77 0 RFS[3]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 78 0 RFS[2]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 79 0 RFS[7]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 80 0 RFS[18]: Assigned to RFS process 2848
05-SEP-12 Network Services 0 81 0 RFS[16]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 82 0 RFS[19]: Assigned to RFS process 2886
05-SEP-12 Network Services 0 83 0 RFS[19]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 84 0 RFS[20]: Assigned to RFS process 2894
05-SEP-12 Log Apply Services 0 85 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 86 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 87 0 Managed Standby Recovery Canceled
05-SEP-12 Remote File Server 0 89 0 RFS[22]: Assigned to RFS process 2900
05-SEP-12 Remote File Server 0 88 0 RFS[21]: Assigned to RFS process 2898
05-SEP-12 Remote File Server 0 90 0 RFS[23]: Assigned to RFS process 2902
05-SEP-12 Remote File Server 0 91 0 Primary database is in MAXIMUM PERFORMANCE mode
05-SEP-12 Remote File Server 0 92 0 RFS[24]: Assigned to RFS process 2904
05-SEP-12 Remote File Server 0 93 0 RFS[25]: Assigned to RFS process 2906
05-SEP-12 Log Apply Services 0 94 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 95 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 96 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 97 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Log Transport Services 0 98 0 ARCa: Beginning to archive thread 1 sequence 37644 (7911979302-7912040568)
05-SEP-12 Log Transport Services 0 99 0 ARCa: Completed archiving thread 1 sequence 37644 (0-0)
05-SEP-12 Network Services 0 100 0 RFS[8]: Possible network disconnect with primary database
05-SEP-12 Log Apply Services 0 101 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 102 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 103 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 104 0 Managed Standby Recovery Canceled
05-SEP-12 Network Services 0 105 0 RFS[20]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 106 0 RFS[26]: Assigned to RFS process 2930
05-SEP-12 Network Services 0 107 0 RFS[24]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 108 0 RFS[27]: Assigned to RFS process 2938
05-SEP-12 Network Services 0 109 0 RFS[14]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 110 0 RFS[28]: Assigned to RFS process 2942
05-SEP-12 Network Services 0 111 0 RFS[15]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 112 0 RFS[29]: Assigned to RFS process 2986
05-SEP-12 Network Services 0 113 0 RFS[17]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 114 0 RFS[30]: Assigned to RFS process 2988
05-SEP-12 Log Apply Services 0 115 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 116 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 117 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 118 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 119 0 RFS[18]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 120 0 RFS[31]: Assigned to RFS process 3003
05-SEP-12 Network Services 0 121 0 RFS[26]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 122 0 RFS[32]: Assigned to RFS process 3005
05-SEP-12 Network Services 0 123 0 RFS[27]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 124 0 RFS[33]: Assigned to RFS process 3009
05-SEP-12 Remote File Server 0 125 0 RFS[34]: Assigned to RFS process 3012
05-SEP-12 Log Apply Services 0 127 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 126 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 128 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 129 0 Managed Standby Recovery Canceled
05-SEP-12 Network Services 0 130 0 RFS[32]: Possible network disconnect with primary database
05-SEP-12 Log Apply Services 0 131 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 132 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 133 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 134 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 135 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 136 0 RFS[33]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 137 0 RFS[35]: Assigned to RFS process 3033
05-SEP-12 Log Apply Services 0 138 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 139 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 140 0 Managed Standby Recovery Canceled
05-SEP-12 Remote File Server 0 141 0 RFS[36]: Assigned to RFS process 3047
05-SEP-12 Log Apply Services 0 142 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 143 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 144 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 145 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 146 0 RFS[35]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 147 0 RFS[37]: Assigned to RFS process 3061
05-SEP-12 Network Services 0 148 0 RFS[36]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 149 0 RFS[38]: Assigned to RFS process 3063
05-SEP-12 Remote File Server 0 150 0 RFS[39]: Assigned to RFS process 3065
05-SEP-12 Network Services 0 151 0 RFS[25]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 152 0 RFS[21]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 153 0 Archivelog record exists, but no file is found
05-SEP-12 Remote File Server 0 154 0 RFS[40]: Assigned to RFS process 3067
05-SEP-12 Network Services 0 155 0 RFS[37]: Possible network disconnect with primary database

ORA-16191: Primary log shipping client not logged on standby.

Hi,
Please help me in the following scenario. I have two nodes ASM1 & ASM2 with RHEL4 U5 OS. On node ASM1 there is database ORCL using ASM diskgroups DATA & RECOVER and archive location is on '+RECOVER/orcl/'. On ASM2 node, I have to configure STDBYORCL (standby) database using ASM. I have taken the copy of database ORCL via RMAN, as per maximum availability architecture.
Then I have ftp'd all to ASM2 and put them on FS /u01/oradata. Have made all necessary changes in primary and standby database pfile and then perform the duplicate database for standby using RMAN in order to put the db files in desired diskgroups. I have mounted the standby database but unfortunately, log transport service is not working and archives are not getting shipped to standby host.
Here are all configuration details.
Primary database ORCL pfile:
[oracle@asm dbs]$ more initorcl.ora
stdbyorcl.__db_cache_size=251658240
orcl.__db_cache_size=226492416
stdbyorcl.__java_pool_size=4194304
orcl.__java_pool_size=4194304
stdbyorcl.__large_pool_size=4194304
orcl.__large_pool_size=4194304
stdbyorcl.__shared_pool_size=100663296
orcl.__shared_pool_size=125829120
stdbyorcl.__streams_pool_size=0
orcl.__streams_pool_size=0
*.audit_file_dest='/opt/oracle/admin/orcl/adump'
*.background_dump_dest='/opt/oracle/admin/orcl/bdump'
*.compatible='10.2.0.1.0'
*.control_files='+DATA/orcl/controlfile/current.270.665007729','+RECOVER/orcl/controlfile/current.262.665007731'
*.core_dump_dest='/opt/oracle/admin/orcl/cdump'
*.db_block_size=8192
*.db_create_file_dest='+DATA'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='orcl'
*.db_recovery_file_dest='+RECOVER'
*.db_recovery_file_dest_size=3163553792
*.db_unique_name=orcl
*.fal_client=orcl
*.fal_server=stdbyorcl
*.instance_name='orcl'
*.job_queue_processes=10
*.log_archive_config='dg_config=(orcl,stdbyorcl)'
*.log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
*.log_archive_dest_2='SERVICE=stdbyorcl'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_format='%t_%s_%r.dbf'
*.open_cursors=300
*.pga_aggregate_target=121634816
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=364904448
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS'
*.user_dump_dest='/opt/oracle/admin/orcl/udump'
Standby database STDBYORCL pfile:
[oracle@asm2 dbs]$ more initstdbyorcl.ora
stdbyorcl.__db_cache_size=251658240
stdbyorcl.__java_pool_size=4194304
stdbyorcl.__large_pool_size=4194304
stdbyorcl.__shared_pool_size=100663296
stdbyorcl.__streams_pool_size=0
*.audit_file_dest='/opt/oracle/admin/stdbyorcl/adump'
*.background_dump_dest='/opt/oracle/admin/stdbyorcl/bdump'
*.compatible='10.2.0.1.0'
*.control_files='u01/oradata/stdbyorcl_control01.ctl'#Restore Controlfile
*.core_dump_dest='/opt/oracle/admin/stdbyorcl/cdump'
*.db_block_size=8192
*.db_create_file_dest='/u01/oradata'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='orcl'
*.db_recovery_file_dest='+RECOVER'
*.db_recovery_file_dest_size=3163553792
*.db_unique_name=stdbyorcl
*.fal_client=stdbyorcl
*.fal_server=orcl
*.instance_name='stdbyorcl'
*.job_queue_processes=10
*.log_archive_config='dg_config=(orcl,stdbyorcl)'
*.log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
*.log_archive_dest_2='SERVICE=orcl'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_format='%t_%s_%r.dbf'
*.log_archive_start=TRUE
*.open_cursors=300
*.pga_aggregate_target=121634816
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=364904448
*.standby_archive_dest='LOCATION=USE_DB_RECOVERY_FILE_DEST'
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS'
*.user_dump_dest='/opt/oracle/admin/stdbyorcl/udump'
db_file_name_convert=('+DATA/ORCL/DATAFILE','/u01/oradata','+RECOVER/ORCL/DATAFILE','/u01/oradata')
log_file_name_convert=('+DATA/ORCL/ONLINELOG','/u01/oradata','+RECOVER/ORCL/ONLINELOG','/u01/oradata')
Have configured the tns service on both the hosts and its working absolutely fine.

ASM1
=====
[oracle@asm dbs]$ tnsping stdbyorcl


TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 19-SEP-2008 18:49:00


Copyright (c) 1997, 2005, Oracle. All rights reserved.


Used parameter files:


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.20)(PORT = 1521))) (CONNECT_DATA = (SID = stdbyorcl) (SERVER = DEDICATED)))
OK (30 msec)
ASM2
=====


[oracle@asm2 archive]$ tnsping orcl


TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 19-SEP-2008 18:48:39


Copyright (c) 1997, 2005, Oracle. All rights reserved.


Used parameter files:


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.10)(PORT = 1521))) (CONNECT_DATA = (SID = orcl) (SERVER = DEDICATED)))
OK (30 msec)
Please guide where I am missing. Thanking you in anticipation.
Regards,
Ravish Garg

Following are the errors I am receiving as per alert log.
ORCL alert log:
Thu Sep 25 17:49:14 2008
ARCH: Possible network disconnect with primary database
Thu Sep 25 17:49:14 2008
Error 1031 received logging on to the standby
Thu Sep 25 17:49:14 2008
Errors in file /opt/oracle/admin/orcl/bdump/orcl_arc1_4825.trc:
ORA-01031: insufficient privileges
FAL[server, ARC1]: Error 1031 creating remote archivelog file 'STDBYORCL'
FAL[server, ARC1]: FAL archive failed, see trace file.
Thu Sep 25 17:49:14 2008
Errors in file /opt/oracle/admin/orcl/bdump/orcl_arc1_4825.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Thu Sep 25 17:49:14 2008
ORACLE Instance orcl - Archival Error. Archiver continuing.
Thu Sep 25 17:49:44 2008
FAL[server]: Fail to queue the whole FAL gap
GAP - thread 1 sequence 40-40
DBID 1192788465 branch 665007733
Thu Sep 25 17:49:46 2008
Thread 1 advanced to log sequence 48
Current log# 2 seq# 48 mem# 0: +DATA/orcl/onlinelog/group_2.272.665007735
Current log# 2 seq# 48 mem# 1: +RECOVER/orcl/onlinelog/group_2.264.665007737
Thu Sep 25 17:55:43 2008
Shutting down archive processes
Thu Sep 25 17:55:48 2008
ARCH shutting down
ARC2: Archival stopped
STDBYORCL alert log:
==============
Thu Sep 25 17:49:27 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-01017: invalid username/password; logon denied
Thu Sep 25 17:49:27 2008
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
It may be necessary to define the DB_ALLOWED_LOGON_VERSION
initialization parameter to the value "10". Check the
manual for information on this initialization parameter.
Thu Sep 25 17:49:27 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-16191: Primary log shipping client not logged on standby
PING[ARC0]: Heartbeat failed to connect to standby 'orcl'. Error is 16191.
Thu Sep 25 17:51:38 2008
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 40-40
DBID 1192788465 branch 665007733
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Thu Sep 25 17:55:16 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-01017: invalid username/password; logon denied
Thu Sep 25 17:55:16 2008
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
It may be necessary to define the DB_ALLOWED_LOGON_VERSION
initialization parameter to the value "10". Check the
manual for information on this initialization parameter.
Thu Sep 25 17:55:16 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-16191: Primary log shipping client not logged on standby
PING[ARC0]: Heartbeat failed to connect to standby 'orcl'. Error is 16191.
Please suggest where I am missing.
Regards,
Ravish Garg

AIP-51505: General Validation Error - SFTP transport - validation disabled

Configuration :
internal DC with SFTP
external DC with SFTP (via proxy)
Business Protocol          Custom Document over Generic Exchange
MLR 12? (patch 8703404)
3 environments have the same tip.properties
2 environments pick up and send all files successfully.
I cannot see a difference between the deployments that is causing the validation error.
[also in all three B2B's are an ebXML and AS2 trading partner configuration]
The 3rd generates validation errors for all files (14) in the b2b.log and sends some (1-7).
Note that the sent ones change, if a failed one is retried in the source directory, sometimes it is sent successfully.
In the failing/validating deployment there is no validation for (cut and pasted from UI screens) :
Document Protocol Revision Details = Translation Enabled False Validation Enabled False
Document Types (Document Definition Details for each document def) = Is Translation Enabled False Is Validation Enabled     False
tip.properties (environment where error occurs) :
#valid valudes for DiagnosticLevel:
#DEBUG, INFORMATION, WARNING, ERROR, FATAL.
#default logging level
oracle.tip.DiagnosticLevel = ERROR
#default component log level for B2B Engine
b2b.oracle.tip.DiagnosticLevel = ERROR
# following logging properties to be set back to false after resolving Sequence 98
# oracle.tip.adapter.b2b.logPayload = true
# oracle.tip.adapter.b2b.packaging.logDecryptMessage = true
b2b.oracle.tip.DiagnosticLevel.Repository = ERROR
b2b.oracle.tip.DiagnosticLevel.BusinessLogicLayer
b2b.oracle.tip.DiagnosticLevel.B2B
b2b.oracle.tip.DiagnosticLevel.ModelValidation
b2b.oracle.tip.DiagnosticLevel.ValidationRule
b2b.oracle.tip.DiagnosticLevel.TechStack
b2b.oracle.tip.DiagnosticLevel.Deployment
b2b.oracle.tip.DiagnosticLevel.Reports
b2b.oracle.tip.DiagnosticLevel.UI
#default component level logging for UI
ui.oracle.tip.DiagnosticLevel = ERROR
#specify component log leel to override default;
ui.oracle.tip.DiagnosticLevel.Repository = ERROR
ui.oracle.tip.DiagnosticLevel.BusinessLogicLayer
ui.oracle.tip.DiagnosticLevel.B2B
ui.oracle.tip.DiagnosticLevel.ModelValidation
ui.oracle.tip.DiagnosticLevel.ValidationRule
ui.oracle.tip.DiagnosticLevel.TechStack
ui.oracle.tip.DiagnosticLevel.Deployment
ui.oracle.tip.DiagnosticLevel.Reports
ui.oracle.tip.DiagnosticLevel.UI
oracle.tip.adapter.b2b.encoding=UTF-8
# Diagnostic Service defaults
oracle.core.ojdl.OrganizationId = oracle.com
oracle.core.ojdl.ComponentId = tip
oracle.core.ojdl.HostingClientId = beta
oracle.core.ojdl.BufferSize = 100000
oracle.core.ojdl.FlushInterval = 5000
# Specific diagnostic settings
oracle.tip.LogDirectory = /space/sw/oracle/products/ias/b2b/ip/log
oracle.tip.LogMaxSegmentSize = 10000000
oracle.tip.LogType = text
# option to save old log when rebounding the service
oracle.tip.LogSave = true
# B2B Info
oracle.tip.adapter.b2b.NumOfWFListeners = 1
oracle.tip.adapter.b2b.NumOfIPListeners = 1
oracle.tip.adapter.b2b.WFAgentName = OUTAGENT
oracle.tip.adapter.b2b.RMIPort = 5111
oracle.tip.adapter.b2b.RMIInstance = IP
#oracle.tip.adapter.b2b.WalletLocation = file:/etc/ORACLE/WALLETS/oracle/ora_wallet.txt
oracle.tip.adapter.b2b.ContinueValidationOnError = true
oracle.tip.adapter.b2b.MultipleIdentifications=false
oracle.tip.adapter.b2b.allTPInOneDirectory=true
oracle.tip.adapter.b2b.DocumentRouting=false
#oracle.tip.adapter.b2b.edi.identifyFromTP = Interchange | Group | Exchange
#oracle.tip.adapter.b2b.transportTrace = /space/sw/oracle/products/ias/b2b/ip/log/transport.trc
#oracle.tip.adapter.b2b.edi.ignoreValidation=InterchangeReceiverID,InterchangeSenderID,GroupReceiverID,GroupSenderID,GroupSenderQual,GroupReceiverQual,InterchangeSenderQual,InterchangeReceiverQual
#report Certificate validation as ERROR or WARNING; default value is ERROR
#oracle.tip.adapter.b2b.tpa.validateCertificate= ERROR | WARNING
#oracle.tip.adapter.b2b.document.NoValidation = inbound | outbound
# HTTP Proxy Host and Proxy Port
oracle.tip.adapter.b2b.ProxyHost =
oracle.tip.adapter.b2b.ProxyPort =
# MaxCachedSessions is set to 0 means no ExecutionContext
# is stored in HTTP session (IP cache is empty).Line below overwrites default
# value equals to 5 when 5 concurrent users could store context in their sessions
# By commenting that line you might turn IP cache on.
oracle.tip.ui.MaxCachedSessions = 0
# Suppression of Validation Warnings
oracle.tip.buslogic.validation.SuppressWarnings=false
# Callout directory
oracle.tip.callout.directory=%s_calloutDirectory%
# persistence directory
oracle.tip.runtime.persistence.dirName=%s_persistenceDir%
# enable ONS reverse ping
enableONS=true
# Optional property which user can set to specify saved report encoding e.g. UTF-8, UTF-16LE etc
# By default this property is not set, in this case the saved report csv file
# will be generated by using the native encoding
# Users can set this parameter to change the encoding of the generated saved report csv file
#savedReportEncoding=UTF-8
# Please don't modify the following properties
# Connection Info
username=%s_intgDBUser%
password=%s_intgDBPasswd%
#connect=jdbc:oracle:thin:@%s_intgDBHost%:%s_intgDBPort%:%s_intgDBSid%
drivertype = thin
tnsentry = inst1
host = %s_intgDBHost%
port = %s_intgDBPort%
sid = %s_intgDBSid%
oracle.tip.connection.useRepositoryAPI=on
oracle.tip.connection.oraclehome=/space/sw/oracle/products/ias/b2b
# property specific to Deployment
oracle.tip.deploy.workflow_username=%s_wfUsername%
oracle.tip.deploy.workflow_passwd=%s_wfPasswd%
oracle.tip.deploy.workflow_tnsname=%s_wfTnsname%
# UI user authorization
authorization = true
# encryption key used for securing secrets in the schema.
oracle.tip.security.key=Be8ejb7yOX3rSefEr5pxBl49WLc0Iej9VeI8jykdjRfv
##oracle.tip.adapter.b2b.WalletLocation = /sw/oracle/products/ias/b2b/Apache/Apache/conf/ssl.wlt/default/b2bwallet
#oracle.tip.adapter.b2b.WalletLocation = /sw/oracle/products/ias/101202/ib/Apache/Apache/conf/ssl.wlt/default/b2bwallet
oracle.tip.adapter.b2b.WalletLocation =file:/sw/oracle/products/ias/b2b/Apache/Apache/conf/ssl.wlt/default/b2bwallet/ewallet.txt
# performance best practices
oracle.tip.adapter.b2b.sleepTimeout=1
oracle.tip.repos.RowSize=100
oracle.tip.adapter.b2b.receiveTimeout=1
oracle.tip.adapter.b2b.TPACache=true
The b2b.log from the failing environment has some lines not seen in the other two environments (the lines referring to MimePackaging:unpack) :
2010.04.29 at 19:07:14:295: Thread-11: B2B - (DEBUG)
Protocol = SFTP
Version = 2.0
Transport Header
filename:SA_ENVSTATUSES.txt
filesize:1
file_ext:.txt
filename_format:%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
fullpath:/mnt/maximage_prd/sa_transfer/SA_ENVSTATUSES.txt
timestamp:Thu Jan 15 09:29:53 PST 1970
2010.04.29 at 19:07:14:295: Thread-11: BusinessLogicLayer - (DEBUG) New ExecutionContext has been created
2010.04.29 at 19:07:14:296: Thread-11: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:296: Thread-11: BusinessLogicLayer - (DEBUG) Recieve a new PersistencyService
2010.04.29 at 19:07:14:299: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Design
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
2010.04.29 at 19:07:14:300: Thread-11: BusinessLogicLayer - (DEBUG) A new PersistencyService is created
2010.04.29 at 19:07:14:340: Thread-11: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) InterfaceListener:onMessage - Invoke inbound callout - null - null
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) InterfaceListenersyncAckEBMSchecking header names
2010.04.29 at 19:07:14:341: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
2010.04.29 at 19:07:14:342: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:343: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: createDataStorage
2010.04.29 at 19:07:14:345: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: createDataStorage
2010.04.29 at 19:07:14:346: Thread-11: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:346: Thread-11: BusinessLogicLayer - (DEBUG) Push Stack: createWireMessage
2010.04.29 at 19:07:14:348: Thread-11: BusinessLogicLayer - (DEBUG) Pop Stack: createWireMessage
2010.04.29 at 19:07:14:348: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
2010.04.29 at 19:07:14:348: Thread-11: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:onMessage sendEventtrue
2010.04.29 at 19:07:14:359: Thread-11: B2B - (DEBUG) DBContext commit: Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:362: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:363: Thread-10: BusinessLogicLayer - (DEBUG) setRuntimeActiveandQuiescing()
2010.04.29 at 19:07:14:363: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processEvents begin transaction
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Enter
2010.04.29 at 19:07:14:363: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Enter
2010.04.29 at 19:07:14:364: Thread-10: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.04.29 at 19:07:14:364: Thread-10: BusinessLogicLayer - (DEBUG) Push Stack: queryWireMessage
2010.04.29 at 19:07:14:364: Thread-11: B2B - (DEBUG) DBContext commit: Transaction.commit()
2010.04.29 at 19:07:14:364: Thread-11: B2B - (DEBUG) DBContext commit: Leave
2010.04.29 at 19:07:14:365: Thread-10: BusinessLogicLayer - (DEBUG) Pop Stack: queryWireMessage
2010.04.29 at 19:07:14:365: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Exit
2010.04.29 at 19:07:14:366: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Enter
2010.04.29 at 19:07:14:367: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Exit
2010.04.29 at 19:07:14:367: Thread-10: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
2010.04.29 at 19:07:14:369: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:identifyExchange Exit
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:identifyExchange Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:identifyExchange SOAPAction is [null]
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) MimePackaging:unpack:Enter
2010.04.29 at 19:07:14:370: Thread-10: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@391da0
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) MimePackaging:unpack:Exit
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2010.04.29 at 19:07:14:371: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {SFTP}
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = SA_ENVSTATUSES.txt
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.04.29 at 19:07:14:372: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - ENVSTATUSES
2010.04.29 at 19:07:14:373: Thread-10: B2B - (ERROR) Error -: AIP-51505: General Validation Error
     at oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin.decodeIncomingMessage(GenericExchangePlugin.java:408)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1477)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2576)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2446)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2401)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
     at java.lang.Thread.run(Thread.java:534)
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-51505: General Validation Error
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2010.04.29 at 19:07:14:373: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {filename=SA_ENVSTATUSES.txt, filesize=1, file_ext=.txt, filename_format=%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt, fullpath=/mnt/maximage_prd/sa_transfer/SA_ENVSTATUSES.txt, timestamp=Thu Jan 15 09:29:53 PST 1970}
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-51505: General Validation Error
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2010.04.29 at 19:07:14:374: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2010.04.29 at 19:07:14:375: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2010.04.29 at 19:07:14:375: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information

Thank you for the suggestion, unfortunately, I cannot get it to work.
I've updated the IDC transport server to 3 different filename_formats, and tried the corresponding files, with correct names to match the filename_format.
After updating the IDC I validated the trading partner (host).
I then updated the agreement using the updated IDC, and validated the agreement.
I then validated the host again.
Then I created a new deployment.
And still received the error.
I then deleted the old IDC and created a new IDC and new agreement and new deployment, trying 3 different "Internal delivery channel filename format" values (updating and validating the agreement and host trading partner each time).
And still received the error.
No matter what I set EITHER the IDC "filename format" OR "Internal delivery channel filename format", the b2b.log always reports :
filename_format = %TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
e.g.
2010.05.16 at 18:05:02:758: Thread-15: B2B - (DEBUG)
Protocol = SFTP
Version = 2.0
Transport Header
filename:SA_DRUGS_10.txt
filesize:1
file_ext:.txt
filename_format:%TO_PARTY%_%DOCTYPE_NAME%_%TIMESTAMP%.txt
fullpath:/mnt/maximage_prd/sa_transfer/SA_DRUGS_10.txt
timestamp:Thu Jan 15 09:54:18 PST 1970
When I try a file with a revision number, e.g. SA_DRUGS_10.txt the log shows :
2010.05.16 at 18:05:03:602: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.05.16 at 18:05:03:603: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - DRUGS
2010.05.16 at 18:05:03:603: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TIMESTAMP - 10
2010.05.16 at 18:05:03:895: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
which makes sense as "10" is not a timestamp.
If I exclude the revision, using SA_DRUGS.txt the log shows :
2010.05.16 at 18:27:03:543: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {SFTP}
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = SA_DRUGS.txt
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = TO_PARTY - SA
2010.05.16 at 18:27:03:544: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = DOCTYPE_NAME - DRUGS
2010.05.16 at 18:27:03:545: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
So, the timestamp gets ignored (as there is no "_" delimiter), but it still fails, probably because there is no timestamp in the filename.
So, why won't the UI correctly set the IDC filename_format or Internal filename_format ?

Unable to upload Transport Package in portal

Hi
Previously i have transported .epa file(Trnasport Package) from dev to acc, it worked fine there.now when iam trying to upload the same in qas portal its getting error like "could not upload file" .can any one assist me with the solution

Sekhar,
Please check the transport_logger trace (logs/transport.log) to troubleshoot transport problems.
Set the loglevels to analyze the transport problems debug in the pcdstartup.properties file for the categories pcd.tracelevel.basictransport and pcd.tracelevel.GI.Transport
Please check Note 679516: Central Note for the Transport Package Editor
Please check Note 743857: Upload issues in cluster scenarios
Please examine this file for pure UI problems like the editor does not load or an object cannot be added to a transport package. pcd_admin_tools_logger (logs/pcdadmintools.log)
Hope it helps.
Regards,
Mona

Dataguard - Primary not applying logs to Standby

Having an issue applying logs to the standby, seemingly it's not setup correctly. I am sure I'm missing something simple here, but would love any input or help. Thanks in advance.
Background:
Primary: CDPMTSB (Single Stand alone)
Standby: CDPMT (RAC)
Error Message on Primary (Alert Log):
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16014: log 3 sequence# 4071 not archived, no available destinations
ORA-00312: online log 3 thread 2: '+FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949'
ARCH: Archival error occurred on a closed thread. Archiver continuing
ORACLE Instance CDPMTSB - Archival Error. Archiver continuing.
Mon Nov 19 19:54:24 2012
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
ARC6: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
ARC6: Archive log rejected (thread 2 sequence 4071) at host 'CDPMT'
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16401: archivelog rejected by RFS
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16014: log 3 sequence# 4071 not archived, no available destinations
ORA-00312: online log 3 thread 2: '+FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949'
ARCH: Archival error occurred on a closed thread. Archiver continuing
ORACLE Instance CDPMTSB - Archival Error. Archiver continuing.
Mon Nov 19 19:59:24 2012
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
ARC6: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
ARC6: Archive log rejected (thread 2 sequence 4071) at host 'CDPMT'
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16401: archivelog rejected by RFS
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16014: log 3 sequence# 4071 not archived, no available destinations
ORA-00312: online log 3 thread 2: '+FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949'
ARCH: Archival error occurred on a closed thread. Archiver continuing
ORACLE Instance CDPMTSB - Archival Error. Archiver continuing.
Mon Nov 19 20:00:00 2012
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_j001_17473.trc:
ORA-12012: error on auto execute of job 72620
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at "CD_ADMIN.UTDCD_SURVEY_PKG", line 4926
Standby Alert Log:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:32:15 2012
RFS[6]: Assigned to RFS process 4248
RFS[6]: Identified database type as 'physical standby': Client is ARCH pid 9561
Mon Nov 19 19:32:22 2012
RFS[1]: Selected log 6 for thread 1 sequence 4073 dbid 1629723947 branch 769881773
Mon Nov 19 19:32:22 2012
Archived Log entry 1097 added for thread 1 sequence 4072 ID 0x62e7f5cf dest 1:
Archived Log entry 1098 added for thread 1 sequence 4072 ID 0x62e7f5cf dest 3:
Mon Nov 19 19:34:23 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:38:12 2012
RFS[1]: Selected log 5 for thread 1 sequence 4074 dbid 1629723947 branch 769881773
Mon Nov 19 19:38:12 2012
Archived Log entry 1099 added for thread 1 sequence 4073 ID 0x62e7f5cf dest 1:
Archived Log entry 1100 added for thread 1 sequence 4073 ID 0x62e7f5cf dest 3:
Mon Nov 19 19:39:23 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:44:24 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:49:24 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:54:24 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Mon Nov 19 19:59:24 2012
Errors in file /opt/app/oracle/diag/rdbms/cdpmt/CDPMT1/trace/CDPMT1_rfs_24994.trc:
ORA-16401: archivelog rejected by RFS
Primary Parameters:
NAME TYPE VALUE
log_archive_config string DG_CONFIG=(CDPMT,CDPMTSB)
log_archive_dest string
log_archive_dest_1 string LOCATION=USE_DB_RECOVERY_FILE_
DEST VALID_FOR=(ONLINE_LOGFIL
ES,ALL_ROLES) DB_UNIQUE_NAME=C
DPMTSB
log_archive_dest_10 string
log_archive_dest_2 string SERVICE=CDPMT VALID_FOR=(ONLIN
E_LOGFILES,PRIMARY_ROLE) DB_UN
IQUE_NAME=CDPMT
log_archive_dest_3 string location="+FRA_DG_01/cdpmtsb/s
tandbylog", valid_for=(STANDB
Y_LOGFILE,STANDBY_ROLE)
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string enable
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
log_archive_dest_state_3 string ENABLE
log_archive_dest_state_4 string defer
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string %t_%s_%r.dbf
log_archive_local_first boolean TRUE
log_archive_max_processes integer 7
log_archive_min_succeed_dest integer 2
log_archive_start boolean FALSE
log_archive_trace integer 0
Standby Parameters:
NAME TYPE VALUE
log_archive_config string dg_config=(CDPMT,CD PMTSB)
log_archive_dest string
log_archive_dest_1 string location="USE_DB_RE COVERY_FILE
_DEST", valid_for= (ALL_LOGFIL
ES,ALL_ROLES)
log_archive_dest_10 string
log_archive_dest_2 string SERVICE=cdpmtsb LGW R ASYNC VAL
ID_FOR=(ONLINE_LOGF ILES,PRIMAR
Y_ROLE) DB_UNIQUE_N AME=cdpmtsb
log_archive_dest_3 string LOCATION=+FRA_DG_01 /CDPMT/STAN
DBYLOG VALID_FOR=( STANDBY_LOG
NAME TYPE VALUE
FILES,STANDBY_ROLE) DB_UNIQUE_
NAME=CDPMT
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string ENABLE
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
NAME TYPE VALUE
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string %t_%s_%r.dbf
log_archive_local_first boolean TRUE
log_archive_max_processes integer 30
NAME TYPE VALUE
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
SQL> show parameter log_ar
NAME TYPE VALUE
log_archive_config string dg_config=(CDPMT,CDPMTSB)
log_archive_dest string
log_archive_dest_1 string location="USE_DB_RECOVERY_FILE
_DEST", valid_for=(ALL_LOGFIL
ES,ALL_ROLES)
log_archive_dest_10 string
log_archive_dest_2 string SERVICE=cdpmtsb LGWR ASYNC VAL
ID_FOR=(ONLINE_LOGFILES,PRIMAR
Y_ROLE) DB_UNIQUE_NAME=cdpmtsb
log_archive_dest_3 string LOCATION=+FRA_DG_01/CDPMT/STAN
DBYLOG VALID_FOR=(STANDBY_LOG
NAME TYPE VALUE
FILES,STANDBY_ROLE) DB_UNIQUE_
NAME=CDPMT
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string ENABLE
log_archive_dest_state_10 string enable
log_archive_dest_state_2 string ENABLE
NAME TYPE VALUE
log_archive_dest_state_3 string enable
log_archive_dest_state_4 string enable
log_archive_dest_state_5 string enable
log_archive_dest_state_6 string enable
log_archive_dest_state_7 string enable
log_archive_dest_state_8 string enable
log_archive_dest_state_9 string enable
log_archive_duplex_dest string
log_archive_format string %t_%s_%r.dbf
log_archive_local_first boolean TRUE
log_archive_max_processes integer 30
NAME TYPE VALUE
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
SQL>
DGMGRL> show configuration verbose;
Configuration
Name: cdpmtqa
Enabled: YES
Protection Mode: MaxPerformance
Databases:
cdpmtsb - Primary database
cdpmt - Physical standby database
Fast-Start Failover: DISABLED
Current status for "cdpmtqa":
Warning: ORA-16608: one or more databases have warnings
DGMGRL> show database verbose CDPMT
Database
Name: cdpmt
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: APPLY-ON
Instance(s):
CDPMT1
CDPMT2 (apply instance)
Properties:
DGConnectIdentifier = 'cdpmt'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '4'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName(*)
SidName(*)
StaticConnectIdentifier(*)
StandbyArchiveLocation(*)
AlternateLocation(*)
LogArchiveTrace(*)
LogArchiveFormat(*)
LatestLog(*)
TopWaitEvents(*)
(*) - Please check specific instance for the property value
Current status for "cdpmt":
Warning: ORA-16809: multiple warnings detected for the database
Any help would be really appreciated. Thanks!
Edited by: 972075 on Nov 19, 2012 3:09 PM

Thanks MSEBERG,
Here's what I found. FRA seems to have enough space on ASM and there are other logs there, not sure what the issue is:
14:31:58 SYS: CDPMTSB> show parameter db_recovery
NAME TYPE VALUE
db_recovery_file_dest string +FRA_DG_01
db_recovery_file_dest_size big integer 60G
DGMGRL> show database CDPMTSB logxptstatus;
LOG TRANSPORT STATUS
PRIMARY_INSTANCE_NAME STANDBY_DATABASE_NAME STATUS
CDPMTSB cdpmt
DGMGRL> SHOW DATABASE CDPMTSB InconsistentProperties;
INCONSISTENT PROPERTIES
INSTANCE_NAME PROPERTY_NAME MEMORY_VALUE SPFILE_VALUE BROKER_VALUE
DGMGRL> show database CDPMTSB InconsistentLogXptProps;
INCONSISTENT LOG TRANSPORT PROPERTIES
INSTANCE_NAME STANDBY_NAME PROPERTY_NAME MEMORY_VALUE BROKER_VALUE
DGMGRL> show database CDPMT logxptstatus;
Error: ORA-16757: unable to get this property's value
DGMGRL> SHOW DATABASE CDPMT InconsistentProperties;
INCONSISTENT PROPERTIES
INSTANCE_NAME PROPERTY_NAME MEMORY_VALUE SPFILE_VALUE BROKER_VALUE
CDPMT2 DbFileNameConvert DG_01/cdpmtsb, DG_01/cdpmt
CDPMT2 LogFileNameConvert FRA_DG_01/cdpmtsb, FRA_DG_01/cdpmt, DG_01/cdpmtsb, DG_01/cdpmt
CDPMT1 LogArchiveMaxProcesses 4 30 4
CDPMT1 DbFileNameConvert DG_01/cdpmtsb, DG_01/cdpmt DG_01/cdpmtsb,DG_01/cdpmt
CDPMT1 LogFileNameConvert FRA_DG_01/cdpmtsb, FRA_DG_01/cdpmt, DG_01/cdpmtsb, DG_01/cdpmt FRA_DG_01/cdpmtsb,FRA_DG_01/cdpmt,+DG_01/cdpmtsb,+DG_01/cdpmt
DGMGRL> show database CDPMT InconsistentLogXptProps;
Error: ORA-16757: unable to get this property's value
Errors in the Alert (from Primary):
ARCH: Archival error occurred on a closed thread. Archiver continuing
ORACLE Instance CDPMTSB - Archival Error. Archiver continuing.
Tue Nov 20 14:34:43 2012
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
Changing destination 4 from remote to local during archival of log#: 3 sequence#: 4071 thread#: 2
ARC6: LGWR is actively archiving destination LOG_ARCHIVE_DEST_2
ARC6: Archive log rejected (thread 2 sequence 4071) at host 'cdpmt'
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16401: archivelog rejected by RFS
Errors in file /data/oracle/app/oracle/diag/rdbms/cdpmtsb/CDPMTSB/trace/CDPMTSB_arc6_9571.trc:
ORA-16014: log 3 sequence# 4071 not archived, no available destinations
ORA-00312: online log 3 thread 2: '+FRA_DG_01/cdpmtsb/onlinelog/group_3.291.799379949'
ARCH: Archival error occurred on a closed thread. Archiver continuing
ORACLE Instance CDPMTSB - Archival Error. Archiver continuing.
DGMGRL> DGMGRL> show database verbose CDPMT
Database
Name: cdpmt
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: APPLY-ON
Instance(s):
CDPMT1
CDPMT2 (apply instance)
Properties:
DGConnectIdentifier = 'cdpmt'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '4'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName(*)
SidName(*)
StaticConnectIdentifier(*)
StandbyArchiveLocation(*)
AlternateLocation(*)
LogArchiveTrace(*)
LogArchiveFormat(*)
LatestLog(*)
TopWaitEvents(*)
(*) - Please check specific instance for the property value
Current status for "cdpmt":
Warning: ORA-16809: multiple warnings detected for the database
DGMGRL> show database verbose CDPMTSB
Database
Name: cdpmtsb
OEM Name: CDPMTSB_devdb40.utd.com
Role: PRIMARY
Enabled: YES
Intended State: TRANSPORT-ON
Instance(s):
CDPMTSB
Properties:
DGConnectIdentifier = 'cdpmtsb'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '7'
LogArchiveMinSucceedDest = '2'
DbFileNameConvert = '+DG_01/cdpmt, +DG_01/cdpmtsb'
LogFileNameConvert = '+FRA_DG_01/cdpmt, FRA_DG_01/cdpmtsb, DG_01/cdpmt, +DG_01/cdpmtsb'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'devdb40.utd.com'
SidName = 'CDPMTSB'
StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=devdb40.utd.com)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=CDPMTSB_DGMGRL)(INSTANCE_NAME=CDPMTSB)(SERVER=DEDICATED)))'
StandbyArchiveLocation = '+FRA_DG_01/cdpmtsb/standbylog'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.dbf'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "cdpmtsb":
SUCCESS
Thanks for your help btw, I'm really at a loss here as to what is going on with this.

Log Transport Stalled

Similar Messages

Maybe you are looking for