Logic express does not respond while loading!

When I start Logic express it takes 2 minutes to finally show up.When I look at the force quit window it says "Not Responding". This is after I hit create project.Logic was running correctly unitl I loaded Win XP through boot camp on a partintioned drive. This is the only thing I think it could be? But I cant unload XP, I domt' have an extra Key code. By the way this is a brand new iMac 2.4 chip runnning leopard

I'm having the same problem. It's weird. It eventually goes, but those 2 minutes feel like a lifetime!

Similar Messages

Lumia 920 seldom does not respond while in sleep m...

Hi,
I encountered the same issue along with another abnormal condition too. Phone turns into locked state and the screen stops glowing (blank black screen), indicating idle state. It doesn't respond when I press unlock button. Also it does not respond for Camera, and Volume buttons too. But, when I connect it to a PC in that state I am able to browse the phone normally via PC only. Phone still remains buggy. As a work around pressing volume-keys + power key + camera key simultaneously restarts the device and resumes to normal state. However, previous state of phone isn't restored i.e., device starts as it were normally restarted.
Regards,
K Chandrasekhar Omkar
Moderator's Note: E-mail address was removed. Please don't publish your personal contact information on a public forum.
Sorry, couldn't find any place to post this. It seems that there is, at least on my phone, a semi-reproducible bug that stops the volume control from working.
Steps to reproduce (from clean phone, ie. just freshly booted, no remnant IE tabs):
1. Turn on phone.
2. Open music+videos (Xbox music) app. Play a song that is locally stored on the phone.
3. While the music is still playing, open up an Internet Explorer tab and navigate to youtube (m.youtube.com).
4. Play an HD movie file. I played Peter Jackson's "The Hobbit" preview #9. Your previously playing music will stop playing.
5. After a few seconds, stop the youtube video playback by hitting the Windows button.
6. Go back to the music+videos app. Play a song that is locally stored on the phone.
On times that the bug shows up, the music plays at a fixed volume. Using the volume rocker will cause the volume display to increase and decrease, but the actual volume will not change unless you change the volume to 00/30, at which point the sound will mute. If the bug doesn't show up, repeat steps 3 through 6 until the issue shows up. You don't need to reboot in between attempts.
Interestingly, volume control still works if you go back to the youtube video. The issue shows up when using the loudspeaker as well as when using headphones. If nobody else can reproduce it, we can start trying to figure out if it's certain music file types or something that cause it. Diagnostic information below:
Model: NOKIA Lumia 920 Carrier: AT&T
OS Version: 8.0.9903.10 Firmware revision number: 1232.2109.1242.1001 Hardware revision number: 1.0.0.0 Radio software version: 1.0.202041.3 Chip SOC version: 8960
Thank you,
Omkar Kandarpa

I've had the same problem. The screen won't blank during a call (like the proximity sensor isn't detecting my face/finger/hand). I keep hanging up on people with my ear. I've taken to locking my screen before putting it to my ear but anytime I get another call / text / voicemail / calendar notification / alarm while i'm on the phone (which happens a lot still) it lights the screen up again and makes it where i'm able to hang up with my ear.
I've factory reset, and had the phone replaced TWICE already. I'm on my 3rd Lumia 920 (and they all have the same issue!) This didn't happen until the most recent firmware update...so I think it was a problem created when they were trying to fix the other proximity sensor issue where the screen stayed on black all the time during a call.
Rebooting does fix the problem temporarily, but it always comes back. I'm tired of hanging up on people and hoping for a new model device from AT&T but they're giving me **bleep** at the moment.
TLDR: Factory reset, replacement devices don't fix the problem. It's a firmware bug. I'm on my 3rd 920 with the same issue. Extraordinarily frustrating.

Logic Express does not show the waveform of the audio after recording

This week, Logic stopped showing the waveform in track.
At the time of recording the wave is usually draws but as soon as I stop is theonly track in a straight line as if no audio recorded, the audio is usually recorded, you can apply effects and plug-ins but it is impossible to edit.
Sorry for any errors in the text, I am Brazilian and I'm using google translator.
Thank you!

after hours of searching I think I found the solution in a post 2010. I do not know for how long, but now it's all working
credits for Foxboy71
you won't find the .plist files via spotlight - they are excluded from search,
go to (user)/library/preferences/
there you'll find the files named com.apple.Logic Express (xyz whatever).plist
delete them. Logic will rebuild them from scratch.
Fox

Logic express does not start up

Today I have updated to Lion.
After the update I tried to start my logic express program (version 8.0.2).
Nothing happen. I tried to start up logic express using the terminal. THis is the output:
MacBook-BC:etc beert$ open /Applications/Logic\ Express.app
LSOpenURLsWithRole() failed with error -10664 for the file /Applications/Logic Express.app.
What's going on? Can it be repaired, can I fall back to leopard?

I'm really disappointed with Apple on this one. I've only owned Logic Express 8 for 2 months and I paid for it fair and square. I've just bought some softsynths to use with it too and now I'm worrying about their compatibility with the whole thing.
I managed to get it run with the command that bch2 posted and that's great, but what I don't understand is if it runs like this, why can't it just run from the dock or app icon as normal? It all just seems like a way of making people buy the latest version.
Anyway, I'm trying to restrain myself from ranting on about Lion and what a mistake I've made .
Thanks for the command bch2, at least I can make my paid-for programme work for a bit longer now before I'm forced to fork out for the latest version.

Airport Express does not respond to Airport Utility

I use 2 Airport Express units as printer servers. I recently changed routers, and both started flashing yellow. I reset both and reconfigured using airport admin. The first is now working(I can print wirelessly from my mac laptop) . For the second I got a message after the reconfiguration that Airport admin had lost contact with it. I cannot bring it up using reset or ethernet. It flashes yellow soon after each reset.
While I was joining the forum and typing this it came back onto the screen as unconfigured. I reconfigured and get the same message:Airpport Utility was unable to find your wireless device after restarting. The device has been successfully updated, but there is a problem rejoining the wirless network. The AE is flashing yellow again. Any suggestions would be welcome.

The device has been successfully updated, but there is a problem rejoining the wirless network.
This is a famous "error" message that in effect says that the Express stored the settings that it received, but these may not have been the settings that it needed to join the network successfully.
Or, there were some other settings that were still stored on the Express, and the new settings are in conflict with the old settings.
My suggestion would be to first perform a Factory Default Reset on the Express and then try to reconfigure it again.
To perform a Factory Defaut Reset......
Power off the AirPort Express for a few minutes
Hold in the reset button on the Express and then keep holding it in for an additional 10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light
Now try the configuration again.

I bought an HP 2050A deskjet. Loaded via CD PC does not respond to the printer please assist me

HP 2050A Deskjet Printer. Operating system Windows XP SP2 pack.
PC not responding to printer, i loaded via CD. had uninstalled it and reinstalled it , still does not respond.
Kindly help.

Hello metehangunaydin,
Please try the below steps so that you may atleast be able to print.
1.Click Start button on the Computer .
2.then click on Control Panel .
3.then Printers and Faxes
4.On top-left, click on Add a Printer
5.Click on Add a Local Printer
6.Then while "Use an Existing port" is selected , select "Virtual USB port ... " then click Next
7.from the Manufacturer list, select HP, and then under Printers list select Deskjet 990c" , then Click next and complete the wizard
Now try printing . It should work.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

While playing a game my iphone went completely frozen, it does not respond to any input, not even to holding down the on/off hey. Any ideas?

While playing a game my iphone went completely frozen, it does not respond to any input, not even to holding down the on/off hey. Any ideas?

Try a reset. That is holding the sleep/wake and home button together until you see the Apple logo and release. That will reset the iPhone, but will not affect your data.
Thanks! It worked just fine!
MRP66

How do I delete pages that keep coming up when I open with first letter? Stop Loading Page icon not activated - does not respond

How do I delete pages I don't want loaded anymore from coming up? The 'stop loading pages' icon does not respond

If you update to Firefox 3.5.x or 3.6.x then you have more options for the location bar behavior.
See [[Smart Location Bar]]
For Firefox 3.0.x See http://forums.mozillazine.org/viewtopic.php?f=38&t=685365 - Customising the Firefox 3 Location Bar
Old Location Bar: https://addons.mozilla.org/firefox/addon/7637

Why does Safari not respond after loading OSX Mavericks on a MacBook air

Why does Safari not respond after loading OSX Mavericks on a MacBook air?

What exactly happens? Does it launch at all? Have you tried rebooting?

Firefox takes 6 minutes to load and then does not respond so what should I do?

After starting Firefox on my Mac (10.8) it takes 5 to 6 minutes to appear. A minute or so later the "Bookmarks and History system will not be functional because one of the files is being used by another application" message appears and Firefox either does not respond or responds very slowly to various mouse clicks and such. For example, I wanted to disable all plug ins and when I clicked on Tools and Addins it took three minutes for the tab to open and after 20 minutes still nothing had appeared on the tab. I've tried restarting Firefox, restarting the Mac, resetting Firefox to the default settings, starting Firefox in safe mode, renaming the places.sqlite file, uninstalling Firefox and reinstalling from a fresh download, performing a complete uninstall and reinstall in which I remove the Firefox folder from the Application Support folder after uninstalling, and relocating the plugins folder. I've tried just about everything in every Firefox support article that there is and nothing works. Any suggestions would be very helpful.Thanks.

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back soon.

Bloody Hell, I install Firefox 4 beta 11 and nothing happens home page loads, and thats it, firefox does not respond

I run 3.6.13 I tried to install beta 4. 11, it downloads and installs, it opens the home page, but that's it, the throb er works but Firefox does not respond, i mean like in nothing, it is dead, you click anywhere on the toolbar, and it is like a dead dog.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

Button does not respond (with attachment)

Hi,
I'm trying to develop a LV program for a psychology experiment to record a participants mouse movements whilst drawing or tracing a picture using the mouse.
My program uses an event structure to generate an event each time the mouse is moved or the mouse button is pressed or released. Upon each of these events the coordinates and button position is recorded to an array.
When they have finished drawing there is a button "Stop & Save" that allows the user to save the coordinate data to a file. This can then be opened by a sister program I'm developing that allows the movements to be replayed and shows where the mouse button was down and up.
At the start of the program there is the option of loading a background jpeg picture to trace over on the screen.
The program then waits for a 'Record' button to be pressed before moving on to record all coordinates there after until the 'Stop & Save' button is pressed.
The problem I have is that the record button does not respond. It doesn't even change state when pressed, even though at that stage it's just sat in a while loop waiting for it to be pressed before moving on to the event structure.
I attach the program for you to look at.
Any help/hints much appreciated.
Thanks,
Dave.
Attachments:
MouseCoordinatesForPW.vi ‏178 KB

altenbach wrote:
Your overall program design is higly flawed. This calls for a single state machine with an event structure that handles all FP events. All your locals can be handled by shift regsters. Get rid of that useless stacked sequence!
Frame 0: Initialization belongs to the left of the state machine. CoordinatesArray should initialize a shift register (no locals needed). Use a boolean shift register to set state to either recording or not. Event for "record, value changed" will switch the boolean to be used on the other states.
Frame 1: "Clear" and "stop" need to be inside their own events. Running it parallel to the event structure is a no-no! Do you really want to record mouse movements on the entire FP or only on the picture area?
Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes no sense.
Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values.
Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead.
Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help.
Message Edited by altenbach on 05-22-2007 09:23 AM
Hi, thanks for your reply.
The reason for the main stacked sequence was to get some order to the program, my programming background's text based and as such I like to think of a program running in a list/sequence order. LabView seems strange when you've been used to programming in asm or C. Does anyone know of any books or online documentation for people migrating from text languages to LV? - I haven't found any.
"Frame 2: Why waste an entire frame on this? Here you clear it and in the next frame you prepend the cleared string to your data. Makes sense."
- The string 'CoordsArray' is cleared to make sure it's empty before chars concatanated to it in the next frame. Call me old fashioned but is it not good practice to clear out any junk in a variable rather than just assuming it's empty?
"Frame 3: An autoindexing FOR loop would be the right choice. A single formating operation can handle multiple values." - not sure what you mean by that?
"Frame 4: Writing the "coordinate string" seems useless, since you just cleared it two frame earlier. You are writing an empty string to a file! Right? Why invert the "canceled?" output, just swap the cases instead."
- No, it's not an empty string since in the previous frame the coordinates array is converted to numbers and concatanated to it. Trust me, it generates a file with lots of data in so no way is it an empty string!!
- Yes, you could just swap the cases instead of inverting the 'canceled' output but sometimes it reads better to say 'if NOT cancelled then DO theTask, ELSE DO nothing' rather than 'if cancelled DO nothing ELSE DO theTask'. Not sure if that makes sense but I guess it's just personal prefference there.
"Frame 5: Unecessary! Once the VI runs out of code, the VI will stop automatically. The "stop" function also does not "close the program window" as you seem to indicate with a diagram comment. Check the online help."
- I wasn't sure how that one would work. I wanted the final exe version to close the program window when the program comes to the end, what's the best way to do that? In the past I think I used the 'Exit' function but this would annoyingly quit LabView at the end of each trial run whilst still in the development stage.
Thanks,
Dave.

WLS 10.3 Does not respond to GET requests (HTTP/1.0)

Hi All,
I have 2 WLS servers running on separate physical hosts behind a cisco CSS load balancer. The keep-alive method the Cisco CSS uses is HTTP GET messages. This keep-alive method does not appear to work, because my WLS servers are not responding to the GET requests with HTTP 200 OKs (as would be expected). These GET messaged appear in the access logs, as follows, but from traces taken on the host, there are no HTTP 200 messages ever transmitted. I see no exceptions or errors related to this in the server or access logs.
WLS access log:
192.168.1.1 - - [14/Dec/2011:18:23:35 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:45 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:55 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
Interestingly, If i use a http-ping tool to send HEAD messages, the server correctly responds with the 200. A major difference between the CSS and the ping-tool, is that the CSS is using HTTP/1.0 where the ping tool uses HTTP/1.1. The GET requests are formatted a bit differently too. Below is how the different GET messages are formatted. Is it possible that WLS 11g does not support HTTP/1.0? Is there any method of debugging that I can employ to troubleshoot this further? As mentioned I do not see any errors or exceptions in the server logs or access logs....
Many thanks, in advance.
HTTP-PING TOOL HEAD MESSAGE - weblogic responds to this message
HEAD /APPDIR/index.jsp HTTP/1.1
Host: myhost.domain.com:7005
Accept: */*
LOAD BALANCER HEAD MESSAGE -weblogic does not respond to this message
HEAD /APPDIR/index.jsp HTTP/1.0
Connection: Keep-Alive
User-Agent: Mozilla/4.06 [en] (WinNT; I)
Accept: image/gif, image/x-bitmap, image/jpeg, image/pjpeg, image/png, */*
Accept-Language: en
Accept-Charset: iso-8859-1,*,utf-8
Host: 192.168.1.66

Other than failing the base address test, does the device seem to work in the test panels? One quick test would be to open the digital I/O panel, change some of the lines to output, toggle the logic levels, and see if the line states track the logic levels. Also, you can switch to the Counter I/O panel, change the mode to simple event counting, set the event source to the internal 100KHz clock, and start the counter. If the counter is working properly, you should see the counter value increase at a rate of 100000/second.
If the test panels seem to work OK, you may still be able to use the board, despite the resource test failing. I still can't explain why the test fails, though.
Joe

I have an issue with Finder. It does not respond

Finder does not respond if I click on the icon. I have to open Finder via a right mouse click and clicking 'Open New Finder window'

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Illustrator "Not Responding" on load and save

Good evening..
We bought a new computer our graphic designer (HP Z400 quad-xeon 2.66GHz, 16GB ram, Quadro 4000 graphic card), installed with Windows 7 64-bit, set it up with the Adobe CS 5.5 Master Collection.
The problem is with Illustrator, whereas it goes to "Not Responding" on load and save of files. The progress bar when saving stops at 5-10%, but it seems like it's still doing it's thing and it eventually goes through (15-45secs). However, I really hate getting this kind of message, moreso because his current desktop (HP XW4600, Win XP 32-bit, 3BG of RAM, Adobe CS5) is not doing this at all.
I looked a lot of the forums, and tested what was offered and it still isn't better.
- I removed an Add-On I had installed, no luck.
- Removed all network drives, no luck.
- Unchecked "Create PDF compatible file", no luck.
Working locally is the same as on the network, which makes me believe the network is not a problem in my case. (Even switched from 100mb network connection to 1GB, which was the first thing I tried)
Mind you, all these things I've tried were done in addition to the others, so even to total of all these wasn't helpful, and I'm still at square one.
I'd like to add that all the other applications in the suite are behaving correctly, Photoshop, Premiere, InDesign... Everything else is working great and not freezing at all. Which is why I find this wierd that Illustrator would act like that while all the others are fine.
Anything else I should be trying?
Jonathan
Edit: I checked again on his previous computer, and it seems the issue is there as well, unlike what I mentionned before, which might point to a problem with Illustrator itself, since between CS5 and CS5.5, Illustrator hasn't changed. Altough I'm not sure if it may be that the old computer is just *that* slow...

Well, it has the Adobe PDF printer (from Adobe Acrobat) and MS XPS Document Writer (from Office), but since they weren't real printer I hadn't mentionned them. Is this what you consider Virtual printer?
Either way, I've added a printer but it's still doing the same thing.

Logic express does not respond while loading!

Similar Messages

Maybe you are looking for