Logic Pro 8 and EWQL SO with PLAY interface

Hi all,
All of this works fine together. I have a question : What do you do when you want multiple instruments with PLAY in Logic and want to use automation on every instrument?
One way is to open PLAY several times and load each of my instruments on different PLAY instances, that way I have complete control over the automation. The only problem with that is that it'S too CPU-hungry.
Another way would be to open just ONE PLAY interface, and load all my different instruments on different Midi channels. Here is my question : how do you get to have control on every instruments automation? If I apply automation on one channel, it goes on EVERY channel...
Do you have a solution for that? I would like to have just one PLAY opened and have all my instruments opened in the same one...
Thanx in advance
Sergio

Open Logic, go to Preferences>Audio>Devices>Core Audio and select the nio as the Core Audio device.
I assume you have the mic plugged in to the nio?
Does it indicate that it gets a signal from the microphone?
The Mac will not 'recognise' the microphone, as it will not recognise anything plugged into the analog inputs of the nio - it will only recognise the nio itself. You have to assign in- and outputs to you tracks in Logic. So if the mic is plugged into input 2, you'll have to select that input on the track you want to record it on.

Similar Messages

  • LOGIC PRO X and BOSS GT 10 USB interface

    Hi I am using Logic pro x for the first time...So im having some difficulties in recording my guitar...I am using the USB interface BOSS GT10 along with my mac book ..my problem is
    1. im hearing multiple sounds in my output ..one of clean guitar and other of the patch that i have made on logic pro..how do i get rid of the clean sound?
    2. there is a very small amount of delay ..which is called latency ...i dont know how to get rid of that??
    3. i have amplitube...can the amps from amplitube be used in my mainstage 3 and logic pro x...if yes how??
    i am new to this interface so kindly explain my problems briefly...
    thank you

    I cannot answer your question about the BOSS interface..... Try reading it's User Guide for more info on routing etc...
    Owner’s Manual: (GT-10_OM.pdf)
    But as far as #2 and #3 are concerned.. I suggest you take a little time and read the very helpful User Guide to Logic Pro found here or under Logic Pro's Help menu...
    The specific parts of the User Guide you will need (Though I also suggest you actually read it from the beginning as there is a lot of useful info in  there you will likely need at some point in the future) would be as follows;
    http://help.apple.com/logicpro/mac/10/#lgcpe11997ba
    and
    http://help.apple.com/logicpro/mac/10/#lgcpbc218a22

  • Logic Pro 8 and nio 2/4 Audio Interface microphone input

    I am new to using macs and have purchased a mac mini. I have fully installed Logic Pro and have nio 2/4 as my input for music via a microphone. Logic finds nio compatable but I cannot however get Logic to recognise the microphone as an input for recording. Logic does not also generate the microphones sounds ie when spoken into in real time. I know the solution is probably very simple but I haven't got a clue where to start in changing the settings ie on the mac and on logic. any help would be much appreciated

    Open Logic, go to Preferences>Audio>Devices>Core Audio and select the nio as the Core Audio device.
    I assume you have the mic plugged in to the nio?
    Does it indicate that it gets a signal from the microphone?
    The Mac will not 'recognise' the microphone, as it will not recognise anything plugged into the analog inputs of the nio - it will only recognise the nio itself. You have to assign in- and outputs to you tracks in Logic. So if the mic is plugged into input 2, you'll have to select that input on the track you want to record it on.

  • M-audio stops working with Logic Pro as soon as I hit play

    I've not found a solution to this anywhere. I've got Logic Pro 9 and hooked up a M-Audio Oxygen 49. The computer and software see the Oxygen okay and I can play any sound I want through the software. Until I hit play - trying to add a track to a recorded song - and the led indicator makes some strange outputs and goes black and freezes. The only way to get it back on is to restart LP. Anyone else have this problem or know what could be causing it? Thanks.

    dbaile wrote:
    How do I check if the tracks are sending MIDI to the Oxygen? I'm pretty sure that's what's going on but don't know how to stop it. Thanks much.
    Have you first tried the test I suggested.
    A test... go to the upper left MENU in Logic, select Preferences/Control Surfaces/Bypass All Control Surfaces
    Quit Logic, turn the Oxygen Off ot unplug the USB cable, restart the Mac, let it settle a minute, power on the Oxygen, wait 30 seconds and then start Logic. If the Oxygen seems to be working ok then it's control surface related.
    Using the Inspector on the right hand side you cab see where the track is sending it's output.  MIDI could only be sent to the Oxygen from an Internal MIDI track or an Environment Object with it's output set to the Oxygen IN.
    Sounds like a control surface thing to me.
    Go to that menu selection I described above and select  "Rebuild Defaults"
    Then Test
    If No change select "Bypass All Control Surfaces"
    Test

  • I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

    I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

    Well, how have to determined no signal is being recieved to your mac?
    Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
    I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
    I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
    Otherwise, if you just want to get this working we can have a look a bit deeper.
    And driver? OS X driver?

  • I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

    I have just purchased Logic Pro X and it doesn't seem to want to work with my Tascam us-122L sound card. Do i need to purchase a new one and if so, any advice on a reasonable priced one?

    What OS do you have? Have you tried the latest drivers?
    http://tascam.com/product/us-122l/downloads/
    alternatives: Focusrite Scarlett 2i2, Presonus Audiobox.

  • Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    Hello,i have a retina with Mountain Lion.I have logic PRO 7 and logic Pro 8 ,with  G5.I can't use the CD with the retina!!It's not a powerpC!!How do i install Logic Studio 8 with Mountain Lion successfully ?too évolution Logic PRO 9?

    The installer for Logic Pro 8 has a bug which keeps it from operating in Lion or Mt. Lion.  Use the program Pacifist to install it.

  • After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet

    after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed  and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

    YES!!! YES!!! YES!!!
    I got it!!! Yes!!!
    Guys, I've solved my problem about that error -10202 (Selected driver not found).
    I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
    That file is called "U.S. - International.rsrc" and it's stored in the following path:
    "Macintosh HD/Library/Keyboard Layouts"
    So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
    That's the clue!
    When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
    So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
    I hope I can help all of you.
    Regards,
    Renato Veiga.

  • What's the best Mac to run Logic Pro 9 and above with no issues

    What's the best Mac to run Logic Pro 9 and above with no issues?

    Any Mac that can happily run OS X Snow Leopard 10.6.8 and Logic Pro 9.1.5.....
    Note: Newer Macs cannot run Snow Leopard because SL doesn't provide hardware support for the newer hardware found in these newer Macs....
    Next best combo for newer Macs is Mavericks 10.9.5 and Logic Pro 9.1.8... but it is nowhere near as efficient a combo as the previous one mentioned...

  • M-Audio Fast Track USB interface not compatible with Logic Pro X and Yosemite

    Hello All!
    I've been trying to simply record some guitar and vocal tracks onto the latest version of Logic Pro X. It worked before I downloaded the update of Yosemite, however now, I can't find a solution to my problem. I've tried everything! Installed new drivers onto the M-Audio and even tried to search for a later update of Yosemite. I have read a few things online about how Yosemite doesn't accept 3rd party drivers. So any USB plugged in to the macbook/mac that isn't mac based it doesn't accept.
    Please can someone help me solve his issue!
    Thankyou!
    Felix

    I know many, many of us who are running things just fine.
    I have to be really honest with you Ben and say... Where are you getting that idea from because it simply isn't so.....
    I have a quite large client list of Logic users from all over the world... and of those that have attempted to use Logic Pro X and Yosemite together... over 80% have had to revert back to a previous configuration because of performance and/or stability related issues...
    I personally, have on test here at the studios...  7 different Macs  ranging from 2010 Mac Mini i7 Servers to 2011 32GB 3.4Ghz iMacs.. to a maxed out 2013 i7 MBP to a top of the line 2014 Mac Pro and all have demonstrated issues regarding performance and stability with LPX and 10.10.x using a variety of different Audio/Midi interfaces, all of which have supposedly 10.10 compatible drivers... and all of which have no such issues running LPX under Mavericks...
    Just a quick scan across the various forums.. indicates that very few people are successfully running LPX under Yosemite without performance problems.... so that's why I am asking where you are seeing 'many many people" because I am just not seeing that myself...
    Cheers..
    Nigel

  • Which MIDI keyboards work with Logic Pro x and Yosimite?

    can anyone suggest some midi keyboards that work with Logic Pro x and yosimite

    Hi Jacub,
    I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
    http://us.focusrite.com/downloads?product=iTrack+Solo
    Please contact Focusrite support if you have any more concerns.
    Best Regards,

  • Soundflower, Logic Pro X and Ustream

    I broadcast a show on Ustream in which I play the saxophone against trax that I have
    loaded into iTunes. I play the sax into an apogee USB mic. I also use that same mic
    to talk to the audience while trax are playing, at which time I need to adjust the level of the track
    and the mic. I’m working on a Mac Pro with Logic Pro X.
    Up until now, here’s what I’ve been doing.
    In Mac Audio Midi Setup:
    I set the output device in Audio Midi Setup to Soundflower (2ch).
    I set the input device in Audio Midi Setup to Mic.
    In Logic Pro X:
    In preferences I set the input device to Mic, and the output to
    to Soundflower (2ch)
    In Ustream:
    I set the input to Soundflower (2ch)
    For monitoring:
    I set the Soundflowerbed desktop app to route from Soundflower to Built-in Output which I then
    listen to on my headphones as I do the show.
    This works, in a fashion, but is extremely awkward, in that the only way to lower the music track levels when I want to speak on the mic is by lowering the slider on iTunes.
    Here’s what I want to do, but can’t yet figure out, despite many attempts:
    I want to route both the iTunes and the mic into Logic Pro X.
    I want to be able to mix both the mic and the trax in Logic Pro X and then
    output it into Ustream for broadcast.
    I also want to be able to monitor the mix though my headphones.
    I’ve tried creating aggregate devices and multi-output devices but can’t seem to get what i want.
    The permutations I’ve tried and the problems are too numerous and varied to list here.
    But I’d appreciate any ideas on how to accomplish running a system + mic input into logic,
    mixing in there, and then piping the combined trax out through Ustream.
    Thanks.
    david

    serisony,
    Make sure your router allows or has multicast enabled... as this is required..
    and..
    Check if you have a firewall operating either on your Mac or in your Router... (On the Mac this also includes apps like Little Snitch... and not just the OS X firewall itself.)

  • Download Logic Pro 9 and Mainstage.

    I want to buy Logic Pro 9 and Mainstage. Can I download a pc connected via moden and install content on my MacBook Pro?

    I guess you won't be able to do that, because you should use the AppStore to buy and download the software.
    What's the problem with your MacBook Pro? Does it's AirPort work? If it does, just find a WiFi network fast enough to be able to download a few Gb of data (e.g. friend's house). You can even try a local coffee shop, if you don't plan to download all the additional content

  • I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

    I'm trying to reinstall Logic Pro 9, and it says It's already installed. I have a project due for class and I need help asap. Please help!!!

    Yea I am. I deleted Logic Pro 9 and moved the App to the Trashcan like normal. Then when I go to install it, it says its already Installed. When I do this with other apps; it works fine, the install thing comes back up like it should once you have deleted the app

  • Can you run Logic Pro 8 and Logic Pro X on the same machine?

    Hello all!
    Congratulations to us on the release of the new Logic Pro!
    I am still running Logic Pro 8 (and was waiting for X to come out since I knew it wasn't too far off) but am concerned over the loss of 32-bit plug-ins with Logic Pro X (the wrapping of my old VST plug-ins alone hurts!).  I've heard that installing Logic Pro X doesn't in any way gimp Logic Pro 9's usage, but can someone confirm whether or not Logic Pro X and Logic Pro 8 can operate in harmony on the same Mac?
    As a bonus, is there any reason to believe that Apple would disable earlier versions of Logic Pro (such as version 8) from running on Mavericks?
    I am planning my Logic Pro and Mac OS migrations!  Thanks!!

    Try here:
    https://discussions.apple.com/community/professional_applications/logic_pro
    This forum is FCP X.
    Al

Maybe you are looking for