Login page how
I know...
Many people have posted these questions over and over again, but i'm a relatively new iWeb user.
Most of all it's because i can't get the **** page to work.
Is it possible to make such a page?
-nfxnru
Not really no.
If you want to do something like this, then you would need to get hosting with either GoDaddy or HostExcellence that offer secure page options and take it from there.
iWeb is not set up for something like this and you won't be able to do this if you are publishing to MobileMe either.
Similar Messages
-
Newbie: Login page how to ?
Hello,
How do I create a login page in apex and link it with some custom defined db table of user/pswd?
Thanks,
JohnFollow the steps:
1. Select Custom authentication (+built 'from scratch' option+) [Shared Components>Authentication Schemes>Create]
2. Let everything as it is, but change only one place (Credentials Verification Method:) Select "Use my custom function to authenticate." And type as "return auth_on_custom;"
3. The function auth_on_custom can take two input parameters (username, password) and returns boolean.
4. Finallise with 'Create Scheme' and you are done.
Make sure you have the function ready in database.
Hope this helps. -
Firefox doesn't open facebook's login page,how can I do?
from a day to another,firefox doesn't even open the facebook's login page!I don't know what to do!! it opens all the other websites ,but not facebook!
== URL of affected sites ==
http://www.facebook.comHello Laura.
Does this also happen on other browsers? If it's only Firefox, try clearing your cache: http://support.mozilla.com/en-US/kb/How+to+clear+the+cache
If that doesn't work, try deleting your Facebook cookies (no data will be lost): https://support.mozilla.com/en-US/kb/Deleting+cookies
If that doesn't help, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author. -
this happens whether I am online or offline. I could be playing a game and if I stop for a minute or so, it will do the above.
HELP it is making me nuts!The easiest way is to use the Status-4-Evar add-on. With it you can choose to not display any of the status messages, or display them in the add-ons bar or location bar instead.
https://addons.mozilla.org/firefox/addon/status-4-evar -
How to change header and footer in login page in oracle apps r12
Hi all,
how to change header and footer in login page in oracle apps r12 and login button background color, please help me
thanks
saranhow to change header and footer in login page in oracle apps r12 and login button background color, please help meTips For Personalizing The E-Business Suite R12 Login Page (MainLoginPG) [ID 741459.1]
How to Personalize Login page in R12? [ID 579917.1]
R12 Login Page: How to Personalize the Logo ? [ID 849752.1]
Thanks,
Hussein -
How to init the login page in JSF?
I should receive the cookie data, if the cookie exists, then redirect to another page, and if not, just turn to the login page.
how can i do all these init operation in JSF?
P.S maybe my English is poor, i am sorry.......Just implement a Filter which listens on /*. No need to do this simple redirection task in JSF.
-
How to edit webvpn login page with 7.2 version in ASA5510?
Dear guys,
As a solution for business, I have deployed webvpn with 7.2 version in ASA5510(Version 8.0 cannot be used in this case). Could you share some experiences in customizating login page of webvpn manually(not use ASDM)? for example, if I want to add some system tips or links in login page, how to do?
Appreciate your kindly help and suggestion.
Best Regards,
David WuCustomizing login page of webvpn with 7.2 version of ASA is easy to be done and the following Url contains the dcument for customizing the webvpn login page for ASA version 7.2:
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/webvpn.html#wp1031868
This document contains the step-by-step procedure for customizing the login page. -
Create a login page that does not link to database
Hi,
I am really new to muse and would like to seek some help....sorry if any similar questions have been asked.
I am making a website interface for my assignment, and i need to create a login page,
how can i make a text box for entering the login ID and the password? and how can i add a login button?
By the way, this does not have to link to a database, it is just a template........so the solution using codes may not help i guessHi,
check this thread Re: Can I create a login/password protection in Muse for a HTML5 page or two? -
Changing the default layout , theme for the default login page
Hi All,
I am new to the Portal development.
I would like to change the default themes , and layout of the portal login page,
How to do it. Required to Add or display some News or FAQ's to the unauthenticated users before login itself.Can any body tell me , what is the procedure, How to implement these above functionality
Regards
VijayHi,
Now that the anonymous access solution has been provided, you may like to refer to these links for changing the logon screen and the themes.
Talking about the login page, it depends on what kind of customization do you want to do.
1) Do you want to change it entirely ?
2) Or you want to keep the same layout but change the images ?
Incase you wan to change it entirely, then refer to this weblog : Modifying The Logon Par(or customising the Logon Screen)
And incase you want to change just the images, then go to System Administration -> System Configuration -> UM Configuration -> Direct Editing and change the following paramaters:
ume.logon.branding_image
ume.logon.branding_text
To change the themes and applying them, refer to this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8d9d9c90-0201-0010-e9a4-ed82031e1908
Hope this helps.
Cheers,
Sunil
PS: Reward points for helpful answers. -
Problem closing Skillbuilders modal page when using Login page 101
Trying to setup website with the Login page opening in a modal window instead of normal Apex window.
Have a Global Page (0) which has a Login button defined - that has a dynamic action defined on it
Login Clicked
True
SkillBuilders Modal Page(2.0.0) [Plug-in]
Fire When Event Result is True
Dialog Title: Login
URL Location: Statically Defined
Static URL: f?p=&APP_ID.:101:&APP_SESSION.:::1:::
Auto-close On Element Selector: div#success-message
Created a branch page 102 called Close Modal
Have tried putting the following javascripts into Page 102 and also without - but cannot get the modal window to close out.
Dynamic Action on page 102 Close Modal Window - Event is On Page Load. No condition set
Execute Javascript Code
Fire When Event Result is True
Fire On Page Load - checked
Code:
javascript:parent.$(parent.document).apex_modal_page('close');
Any ideas which might help ?
Thanks - JonathanI can't say. I have not successfully tried this in any version of Apex (until just now).
Ignore my suggestions regarding page 0 from earlier.
If the user is on a page in your application and they have an invalid session, when they get that valid session in the login page how are you going to pass along that information to the parent/calling page? This just doesn't seem to be only about the authentication scheme.
A simple test I set up right now has me at page 1. I click a button and I get the login page modal. I login and the modal window displays a logged in version of page 1. But if I manually close that modal window and then refresh page 1 in the main parent window, I am still not logged in. A little further digging and I see it is in part due to the URL and the session id within.
If my URL is http://apex.oracle.com/pls/apex/apex/f?p=18025:1 then this refresh will not work.
If my URL is http://apex.oracle.com/pls/apex/apex/f?p=18025:1:123456 and 123456 is not a valid session then this refresh will not work.
You'd need to follow Jorge's suggestion to use some javascript like top.location.href="&FSP_AFTER_LOGIN_URL." to set the parent window to use the correct url containing the session id.
You would have to control when that code is placed on a page. I have a working example now at the above URL that uses a dynamic action on page 0.
Event = Page Load
Condition = Page != 101
Action = Execute Javascript Code
JS Code =
if (window.location != window.parent.location)
parent.location.href="&FSP_AFTER_LOGIN_URL."
So if I am loading page 101 do nothing. If I am loading another page, check if the parent and iframe are different source locations (indicating this is an iframe because even a non-iframe window will have a value for parent.location) and if so then set the parent page location to that of the iframe. In effect the redirect that happens in the modal is transferred to the parent.
This will break any other modal page instances you use though. But you could add them to the condition of the dynamic action on page 0 so you have something like "page not in 101, 1020, etc."
It seems to work but it feels like a hack to me. Perhaps a specific template for the modal window with some version of this javascript would at least keep you from running this script on every page load.
Greg -
How to change the behaviour of the Cancel-Button of SSO-Login-Page (Forms)?
Hi Folks,
we use SSO-Login to authenticate users using Forms. How do I change the URL which is opened when a user clicks on the cancel button on the SSO Login page?
In the formsweg.cfg file there is a parameter named ssoCancelUrl, but if I define it, it doesn't work anyway. Seems like it has something to do with ssoDynamicResourceCreate, but I don't exactly understand what.
Can't I simply change the URL which is opened (globally), when a user hits the cancel button on any SSO-Loginpage.
Thanks in advance.
Regards.Exactly this does not work! Please watch my settings:
Global Setting in formsweb.cfg
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=false
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
App-Specific settings in formsweb.cfg
[proz]
envFile=proz.env
form=proz.fmx
title=proz
separateFrame=true
width=1280
height=960
ssoMode=true
ssoDynamicResourceCreate=false
ssoCancelURL=http://machinename:port/zugangsportal/
otherparams=useSDI=yes P_SERVER_URL=machinename:port P_REP_SERVERNAME=machinename_proz ZP_TARGET_ID=%ZP_TARGET_ID%
When I now access http://machinename:port/forms/frmservlet?config=proz I got redirected to the SSO-Login-Page but the Cancel-Button still links to Middletier Home. Why?
Regards. -
My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.
Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G. -
when I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome this.
Delete abd re-enter your Facebook account information jnder the accounts tab in the iPhoto preferences
You may also want to take a look at the user tip for Facebook problems
LN -
How can I open the EP login page in the same pop-up window?
is it possible for me to using / only one window(Browser) pop-up to EP Page(Login or iView...).
In the firs general html page I create a EP login page link action[eg. "window.open('url', 'target_name')"],
but always launching new pop-up window(Browser).
How can I open the EP login page in the only one window(pop-up)?
Could anybody help me by giving suggestion and codding?
Thanks,
jin.Hi,
if you want to redirect the root of portal system (http://portal/) to the login page, edit the
file and change the body tag as follow:
\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root\index.html
<body onload="location.replace('irj/portal' + document.location.search)"></body> -
How to modify the text in login page?
In login page , there are some lines text:
This network is to be used only for legitimate business purposes. If you are not authorized to have access, do not enter this network. By entering the network, you agree to maintain its confidentiality and not to disclose or misuse the information contained in the network and you further agree to our monitoring of your use of this network.
How to modify or delete these words ?
ThanksThis text is not a translation managed in the DB. you can modify the aspx page, directly. web\webcommon\login.aspx
Maybe you are looking for
-
Run time error when we click "Leave overview " in ESS - pl help
Hi Gurus , We are getting run time error when we click the 'Leave Overview' in ESS. when emloyee applies for leave he may need to wait for aproval during that time he cannot access the 'leave overview' screen he will be facing run time error . becaus
-
Is there a way to prevent someone from forwarding a Mail message? In other words, is there a way, upon creating a mail message to prevent the recipients from forwarding?
-
Saying canon's raw files (.crw) are unsupported
When I shoot in RAW with my Canon EOS D60, plug it into my computer, and import the .crw files straight into Aperture 3 (using the trial at the moment), the resulting image is a black box telling me the image format is unsupported. Everywhere I look
-
Data Syncronisation between EPMA applications
Hi General question I want to transfer data from 2 planning applications into a third planning application. All applications are EPMA (11.1.1.3 !). One way ( a bit clunky ) is to do a DATAEXPORT from the source applications & then load the file into
-
Lion keeps shutting down!!
I run the latest version of Lion on my macbook 15" (summer 2009 model). Suddenly today I was presented with this message (image). I try to restart and after a while this message appears again. What is this? I also tried to reset the PRAM - still the