Logon_time in v$session gives old date for new session

Hi,
I have a unique issue whenever I run v$session for username='A' and status= active I see logon_time as old date in this its '12-MAY-2008'. Now there are total 150 sessions for username='A'. 2 are status= Active, 1 is status=Killed and 147 are status=INACTIVE.
So whenever a new session comes from application side it activates the INACTIVE session and date remains 12-May-2008 instead of current date.
Also when you logon directly to Oracle using user 'A' , again same logon_time in v$session, rather than current date in logon_time. We are using Oracle 9.2.0.6 on Unix.
Any way I can resolve this issue?
Regards,
Tushar Kathe

Hi,
select username,logon_time,machine,terminal from v$session where status='ACTIVE';
USERNAME LOGON_TIM MACHINE TERMINAL
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
04-MAY-08 prod1.test.com UNKNOWN
SYS 22-MAY-08 prod1.test.com
pts/4
TEST 12-MAY-08 app20.test.com
SYS 22-MAY-08
16 rows selected.
You can see the schema test shows logon_time as 12-May-08 but he has infact logon in the system today so should have today's date. The Toad time output I don't have.
Regards,
Tushar Kathe

Similar Messages

How to set a default start and/or end date for New Events based on trigger date.

I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
Any thoughts or ideas?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

I just swapped old modem for new model. Says I'm connected but airport flashing amber and no connection. Do I have to configure a new network???

I just swapped out old modem for new model. Airport flashing amber. Wi-Fi connection good but airport not responding. Do I need to configure a new network connection? Change anything in airport utility?

Welcome to the forum!
I'm a big fan of resetting in situations like this. Who knows what boxes you've ticked where...
Use the hard reset button with a paper clip on your Airport express. Hold it til the light starts blinking, then let it reset.
While it's resetting, go into your Network prefs and make sure you're set up to connect via Airport. Delete any references to your prior wireless network in the preferred networks section. Go into your keychain utility and delete any passwords there. (this is assuming you were using some form of wireless security).
After your AE has restarted, choose it from the Airport pull-down menu and run the Airport Setup Assistant utility. Once you've got it up and running, use Airport Admin utility to set security and passwords.
Seems drastic, but after all the poking around you've done, these steps should be pretty simple to perform. I'm guessing your original "Looking for PPPoE host" was a temporary problem with your IP. Maybe the ethernet cable was unplugged from AE?
Good luck

Reader XI still gives "insufficient data for image" error

Our fax machine creates .pdf files of the faxes and recently our back office has had trouble printing them. When I look at them they give an "insufficient data for image" error, but only on one page each. I've tried upgrading to reader XI but the problem persists. I've gotten around it by taking a screenshot and printing the one page that doesn't work so far, but I'd like to get this fixed. It only started happening today. I have a call in to our fax provider, but I was wondering if anyone here had any possible solutions.
Thanks,
Also due to the nature of the documents I'm unable to provide a sample.
Message was edited by: riderryuken

It is also happening to me (running v 11.0.2). I tried adjusting the various settings under the "View" menu and at best could only see part of what was missing. I resolved the issue by downloading and installing Foxit Reader. Bingo! now I can see the entire document.

Upload Demand Data adds up to the old data for SAP SPP

While uploading demand data using csv files, it adds the demand values again if uploaded for same part- same time- location again.
Do we an option in the data upload process, where in we can configure it so that it overwrites the old data and add the new data.

Hi Bhargav ,
When you are repetitively load the same data, there exists the requests in request tab page of Manage Data Targets which are active and again you are loading the same data with different request ,hence it gets added ,
If you don't want then you need to delete this old request and then load the data or in InfoPackage in Update Tab page you can select the delta update or full update option .
Regards ,
Digambar

Webi report gives old data in infoview on refresh

Hi Experts,
We are facing this strange issue on a webi report after some data updation in the SAP BW infocube.
The webi report is based on the universe which is connected to an infocube in our BW dev system. After some data updation in the cube, we had tested the report in webi rich client and everything was working fine (the newly updated data from cube was reflecting). Now, we had tested the same report in infoview, but it was showing the old data only. We had tried exporting the report once again to infoview, refreshed universe structure; but without any success.
What appeared to be even more strange was that the last refresh time was also not changing. While running the report in the infoview it hardly takes 40secs. But on refreshing it says the last refresh time was 5mins.
Any help on this would be highly appreciated.
Regards,
Arun.

it sounds like when you refresh report in Infoview you get the cached data, it never goes to the DB to fetch new one...
You'll need to enable traces on webi processing server as well as SOFA/MDX tracing and review log files to see if requests are going to db or not and what is being returned.
It could be at webi proc level or at your BW level.
You can also try disabling webi caching in webi proc server properties and see what happens.

Getting old data onto new hard drive

I've backed up my current hard drive and I will be replacing it with a new one tonight. My question is once I do this, do I just plug in my external drive with the back up and then...? How do I get my old data onto the new hard drive? Thanks!

How did you back it up, Surfer?
If you "cloned" the existing internal to the external, using SuperDuper or Carbon Copy Cloner, then you simply boot from the external drive, use Disc Utility to make sure that the new drive is formatted using the GUID partition scheme and HFS(extended) file system (and reformat it if it is not), and then clone back to the internal.
If you backed up using Time Machine or Disk Utility, then it will depend on what you chose to back up, but you may be best off re-installing the OS from your OS DVDs and then "migrating" the material from the drive (see http://support.apple.com/kb/HT1553 and http://support.apple.com/kb/HT1427 for some general information and links to other relevant material).
If you simply backed up data by dragging it across to the other drive then you will need to re-install the OS and applications from the original discs, set up a user account and then drag things back to the appropriate locations.
In all cases you should make sure that the drive is partitioned with the GUID partition scheme, and formatted as HFS(extended) first, though.
Cheers
Rod

Trade old iphone for new iphone

i have the iphone right now. but the old one. can i trade my old one for the new iphone?

On trade in of those of us who have the old iphone - the responses to previous questions about this have been difficult for me to navigate to find the definitive answer. Is it officially May 27, 2008? That if you purchased your iphone BEFORE that date, you ARE NOT eligible to trade in your old iphone.
If so, this is the last time I am buying a new innovative product from Apple when it first comes out. It seems just too soon to be offering such a significant upgrade on a product which I have only had for 7 months! Usually it is 2 years before a cell phone is upgraded.

What about the 50% extra data for new customers?

I signed up for Verizon HomeFusion 17 days ago. I copied the following straight off your webpage for new HomeFusion customers:
"New customers to the service will receive 50% more data allowance for their first 2 full billing cycles. Requires new 2-year activation." Why am I getting data usage alerts and my account is only showing 10 GB allotted for this month. My bill shows that I was allotted 15 GB for only two days (1/24-1/25). It hasn't been two months yet, barely even two weeks. Who do I contact to get this fixed?

Getting data overage alerts can certainly be concerning flair_2000. Let's get to the bottom of your usage concerns. Customer gets a 50% data bonus on their prorated billing cycle at activation. If you are currently on the 10 GB data plan, with the 50% more data, you will obtain an additional 5GB of data. When is your bill cycle end? Depending on your bill cycle, you will still obtain data usage alerts. For example, the 10 GB of data usage will be prorated depending on when service is activated and your bill cycle ends. The 5GB of extra data will not be prorated.
To view your usage and prevent any overage, you may review your usage online via My Verizon by clicking http://bit.ly/xB4iTc Should you have further questions or concerns, please feel free to reach out to us.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Release date for new updates

I'm super excited about the new features, especially the integration of C4D and AE, and adding looks in Premiere. I've looked for information about release dates but can't find any details. What's the release date for the new features?

No official date yet but based on past releases it will likely be in the next month or two.

N73 - date for new software version

Please see below the date for the next update. This came from their Director of Customer Care:
"With regards to your recent enquiry concerning software availability for your product code 0539101 for UK Country Variant I can confirm that at present you already have the latest software version available. New software version for your product should be available no later than Friday the 8th December in both our Nokia service points and Nokia Software Updater."

goodie...
for all those complaining about no Country Variant fw editions, just hang on 2 more weeks and have a merry xmas

Restoring old data onto new iPhone 4S

I had an iPhone 4 and just got the 4S, but when I plugged the 4S into my mac it registered as a new phone and didn't ask to restore it from my old one. How do I get my old data on this new phone?

Hi, I'd been researching re: restoring from Back-up on my iPhone 4 and it all says "Connect iPhone to iTunes, in Left column of iTunes under devices, control click or option click or command click, it is one of those, your new iPhone's name. A menu will drop down, select Restore from Backup"....
My question is.. How come the Restore from Backup is not showing when right clicking on my iPhone.
Any idea why is this happening and is there any way that I can restore my newly upgraded iPhone?
Thanks in advance.

Raw up date for new nikon d7100 in cs5.1

raw up date for nikon d7100 for cs5.1 can any one please help me on this matter

The D7100 is supported only in PS-CS6/ACR 7.4 and newer. There will be no update for CS5.1.
You can upgrade your CS to CS6 or CC or download the free DNG Converter to make DNGs from your NEFs and open those in older versions of Camera Raw. You’ll want to make sure to set the DNGC compatibility options to something lower than the default of ACR 7.1. The DNG Converter is available, here:
http://www.adobe.com/downloads/updates

HT203177 Can time machine backup data for newer OS?

I had upgraded my Macbook to OS X 10.7
Can I continue to backup data for Time Machine used to backup data for the same Macbook with previous version of OS?

Yes. Time Machine will continue to backup your system as it should.

Data for new company code

Hi all we are in process of creating new company code. And wanted to upload data for the same.We are given the reference company code for extracting the master data.
I dont know how to make use of this reference company code to extract the MATERIAL AND VENDOR data required.
WHICH TABLES I SHOULD USE TO EXTRACT THE DATA
Thanks in Advance
Monica

Hi,
Use tables,
1.For material MARA,MARC,MVKE,( try use t.code:MM60)
2.For vendor LFA1,LFB1 (try use t.code:MKVZ)
Regards,
Biju K

Logon_time in v$session gives old date for new session

Similar Messages

Maybe you are looking for