Long Text creation of Delivery using DELVRY03

Hi Gurus,
I'm using Delvry03 basic type to create ASN in SAP. It is an Inbound processing. Here the problem as I'm not able to create HEADER text's using the segment E1TXTH8. wghen i try to create using SAVE_Text function module texts are getting created, Also i didn't find any E1TXTH8 realated code in the inbound function module idoc_input_delvry. is there any way to create header text without going for user-exits.
Thanks&Regards,
Naren.

hi naren,
to say in detail about ur doubt i need ur code.u can send ur code to my mail-id [email protected]

Similar Messages

Display the long text in alv by using function modules

Hi all,
How to display the long text in alv by using function modules ?
Send me any sample code.
Thanks in advance
krupali.

Hello KR,
Use READ_TEXT and concatenate the first lines of the text.
CALL FUNCTION 'READ_TEXT'
     EXPORTING
          id       = 'F01'
          language = sy-langu
          name     = lv_name " purchase order with leading zeroes
          object   = 'EKKO'
     TABLES
          lines    = t_lines
     EXCEPTIONS
          OTHERS   = 8.
You can loop at t_lines and concatenate header in to some other field.
Best Regards,
Sasidhar Reddy Matli.
Edited by: Sasidhar Reddy Matli on Aug 13, 2008 12:25 PM

Long Text display in WebI using transient provider

Hi,
I need to display the long text (about 5000 characters) in WebI report in one column. I have created a transient provider and query with 84 (5000/60) InfoObject . when i tried to create the WebI query with all 84 dimensions, got error
"Termination message sent ABEND RSBOLAP (000): Program error in class CL_RSBOLAP_QV_RESULT_SET
method : TOO_MANY_DRILL_DOWN_OBJECTS
MSGV1: CL_RSBOLAP_QV_RESULT_SET MSGV3: TOO_MANY_DRILL_DOWN_OBJECTS (WIS 00000)"
I think more than 50 fields can not be fetched and displayed.
So to over come this I created 2 WebI queries having 42 fields each. I concatenated 42 dimensions from each query in to 2 variables. But when I tried to concatenate these 2 variables system does not allow that it gives #DATASYNC error. Could you please help here, how to archive this?
Regards,
Amit

Hi,
you can do this by using workbooks.
Check the below link very useful:
/people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
last read creation of orkbooks in the above link.
/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-i
/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-ii
Reg
Pra

DG text pattern from delivery used in Sales Order or Purchase Order

Has anyone tried to copy the logic for printing EHS DG text pattern from delivery for use when generating bill of lading from a Sales Order or Purchase Order?
SAP logic is using delivery only - we have not found how to copy SAP code to generate text patterns without delivery.
Wondering if anyone has had similar issue and what approach or solution was found.

hello, friend.
you do not have to change the requested delivery date. the purpose of this date is to indicate a preliminary customer requirement date. this date is relevant for MRP.
but the system looks at this requested date and calculates if your system can fulfill the requirement on this date; in the process, the system considers all lead times such as production (if internally procured), purchasing (if trading goods/externally procured) and others (delivery, picking, packing, etc.). if yes, this requested date is adopted as the schedule line (and earliest delivery creation) date. if no, then the system will propose a later date (also becoming the proposed confirmed schedule line date).
hope this helped you.
regards.

How to send long text in a mail using FM : SO_NEW_DOCUMENT_SEND_API1

Hi All,
In my BSp application user can enter long text ( can be more than 300 char ) in TextEdit.
problem is as below:
1) i am getting all the text in oninput processing ...
2) using the FM READ_TEXT to get mail template built in SO10.
3) Replacing all dynamic variables in mail template with user enterd text.
4) then passing the data to FM SO_NEW_DOCUMENT_SEND_API1. this FM has table parameter with 255 char ( please check once )
i am able to send the data in mail. But long text more than 256 char is not comming as single paragraph.
For expamle ...user enter the following text in text edit.
Responsible for the development, implementation, and maintenance of human resource information systems (HRIS) associated with the collection, retrieval, accessibility, and usage of employee information for Human Resource department planning and activities. Maintains internal database files and tables, and develops custom reports to meet the requirements of Human Resource management and staff.
in inbox i am getting as below:
Job Description for : Responsible for the development, implementation, and maintenance of human resource information systems (HRIS) associated with the collection, retrieval, accessibility, and usage of employee information for Human Resource depa
Maintains internal database files and tables, and develops custom reports to meet the requirements of Human Resource management and staff.
Job Description for is fixed text from SO10 templete. and remainning text is user text.
some data is missing in mail.
SO10 template is as below :
Job Description for : &INSTRUC1&
&INSTRUC2&
help to solve the above issue.
Regads,
Kishan
Edited by: kishanrao.sap on Oct 11, 2010 3:12 PM

Hi Krishna,
Please use the object_type parameter of tthe FM as 'HTM'.
Then divide the text by append them into the lines of the object_content. In the begining and end make sure you have
 -- in the begining
-- in the end
if i want to type the text in one para " My name is Imran and i am an ABAP developer".
CLEAR: WA_OBJECT_CONTENT.
WA_OBJECT_CONTENT-line = '<html>'<body> My name is Imran.
APPEND WA_OBJECT_CONTENT TO T_OBJECT_CONTENT.
CLEAR WA_OBJECT_CONTENT.
WA_OBJECT_CONTENT-line = ' and i am an ABAP developer</body><html;>'.
APPEND WA_OBJECT_CONTENT TO T_OBJECT_CONTENT.
Hope this helps you.
Regards
Imran.

Operation Long text creation problem in IW32

Hi experts,
I have a requirement of showing a checklist pop up for all the new external operations in creating a MPA work order(IW32). And when the user answers the questions on the checklist, I have to copy all the questions and answers into the long text of the corresponding operation.
The problem here is,
for a case when the long text is not yet created for a new line item, when the pop up is shown and answers are filled, I am creating a new standard text using SVE_TEXT(setting the insert paramter 'X'), but the standard text is getting created in the database i.e a record is getting created in STXH with the text id, text name, text object of the operation. But when I go to IW32 and see the operation line it shows the create long text icon which says that the text is not created at all.
In a case where the long text is already created for the operation, and then the pop up is shown with the questions and answers are filled, the questions and answers are copied into the operation long text which is already created. So this works fine.
If any pointers regarding this please let me know.
Thanks and Regards,
Asha

Hi,
Try passing SAVEMODE_DIRECT = 'X' and check..
also check if the text exists using the function module READ_TEXT once you do the SAVE_TEXT..
Thanks,
Naren

Download to excel - long text in single row using gui_download

Hi Experts,
I want to download the long text (read_text) (500-600 characters) to excel in single row. the column width should be 60.
i am using the gui_download FM as in my report i m using one gui_download for header data and 2nd one for details using APPEND . Can u suggest me the solutions for the same. Can i use word wrap option and if yes , then how to use it?
For eg.
Customer Satisfaction
There are no escalations / adverse feedback from the customer
Customer uses him/her for benchmarking others
Regular status update to customer
Proactively understands future needs of customer
Increases customer's confidence so that there is an increase in quality / quantity of work
This whole text should appear as single row.
Thanks,
Edited by: Khushi p on Nov 12, 2010 10:44 AM

I tried alot to put this in a legible format by usingcode...code but still it is not putting the code in a correct format.May be some mentor will put it in a good format so that you can understand.Below is a wraper progrm which meets your objective.
REPORT ZSCRATCHPAD.
TABLES:EKPO.
TYPE-POOLS:slis.
TYPES : BEGIN OF ty_ekpo,
 ebeln TYPE ekko-ebeln,
 ebelp TYPE ekpo-ebelp,
 txz01 TYPE ekpo-txz01,
 matnr TYPE ekpo-matnr,
 werks TYPE ekpo-werks,
 loekz TYPE ekpo-loekz,
 oic_ptrip TYPE ekpo-oic_ptrip,
 menge TYPE ekpo-menge,
 meins TYPE ekpo-meins,
 umrez TYPE ekpo-umrez,
 umren TYPE ekpo-umren,
 text TYPE string,
 END OF ty_ekpo.
TYPES : BEGIN OF ty_text ,
 tdformat TYPE tline-tdformat,
 tdline TYPE tline-tdline,
 END OF ty_text.
data: g_t_ekpo TYPE STANDARD TABLE OF ty_ekpo WITH HEADER LINE,
 g_repid TYPE sy-repid,
 g_ebeln(15),
 l_fieldname1 LIKE ibipparms-path,
 l_fieldname2 TYPE string,
 g_objectid LIKE cdhdr-objectid,
 g_t_text TYPE STANDARD TABLE OF ty_text WITH HEADER LINE,
 g_t_text1 TYPE STANDARD TABLE OF ty_text WITH HEADER LINE.
data:g_fieldcat type slis_t_fieldcat_alv with header line,
 g_events type slis_t_event,
 wa_events like line of g_events,
 g_listheader type slis_t_listheader,
 walistheader like line of g_listheader,
 g_layout type slis_layout_alv,
 g_top type slis_formname,
 g_sort type slis_t_sortinfo_alv with header line,
 g_sort1 type slis_sortinfo_alv,
 g_printparams type slis_print_alv,
 g_variant type disvariant,
 g_title type lvc_title,
 g_excluding type slis_t_extab,
 g_grid TYPE REF TO cl_gui_alv_grid.
field-symbols: <fs> type lvc_title.
SELECT-OPTIONS:P_EBELN FOR EKPO-EBELN NO INTERVALS.
PARAMETERS:p_r1 radiobutton group grp1,
 p_r2 radiobutton group grp1.
SELECT ebeln
 ebelp
 txz01
 matnr
 werks
 loekz
 oic_ptrip
 menge
 meins
 umrez
 umren
 INTO TABLE g_t_ekpo
 FROM ekpo
 WHERE ebeln IN p_ebeln
 AND loekz NE 'L'.
IF sy-subrc <> 0.
CLEAR g_t_ekpo.
ENDIF.
define m_fieldcat.
g_fieldcat-fieldname = &1.
g_fieldcat-col_pos = &2.
g_fieldcat-seltext_l = &3.
g_fieldcat-do_sum = &4.
g_fieldcat-outputlen = &5.
g_fieldcat-checkbox = &6.
append g_fieldcat to g_fieldcat.
clear g_fieldcat.
end-of-definition.
if p_r1 = 'X'.
PERFORM summary_display.
else.
perform download.
endif.
FORM summary_display .
concatenate 'Test' ' ' into g_title separated by space.
assign g_title to <fs>.
g_repid = sy-repid.
m_fieldcat 'EBELN' '' 'EBELN' '' 10 ''.
m_fieldcat 'EBELP' '' 'EBELP' '' 05 ''.
m_fieldcat 'TXZ01' '' 'TXZ01' '' 40 ''.
m_fieldcat 'MATNR' '' 'MATNR' '' 10 ''.
m_fieldcat 'WERKS' '' 'WERKS' '' 04 ''.
m_fieldcat 'LOEKZ' '' 'LOEKZ' '' 01 ''.
m_fieldcat 'OIC_PTRIP' '' 'OIC_PTRIP' '' 16 ''.
m_fieldcat 'MENGE' '' 'MENGE' '' 13 ''.
m_fieldcat 'MEINS' '' 'MEINS' '' 03 ''.
m_fieldcat 'UMREZ' '' 'UMREZ' '' 05 ''.
m_fieldcat 'UMREN' '' 'UMREN' '' 05 ''.
g_layout-zebra = 'X'.
g_layout-colwidth_optimize = 'X'.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
* i_callback_pf_status_set = 'SET_PF_STATUS'
 is_layout = g_layout
 i_callback_user_command = 'LIST1'
 i_grid_title = <fs>
* i_callback_top_of_page = ' '
 it_fieldcat = g_fieldcat[]
* it_excluding = g_excluding
 i_save = 'A'
* is_variant = ITVARIANT
 it_events = g_events[]
* is_print = ITPRINTPARAMS
* it_sort = itsort[]
 tables
 t_outtab = g_t_EKPO[]
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear:g_fieldcat.
refresh:g_fieldcat.
ENDFORM. " summary_display
form list1 using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
case r_ucomm.
 when '&IC1'.
 REFRESH g_t_text.
 if rs_selfield-fieldname = 'EBELN'.
 READ TABLE g_t_ekpo INDEX rs_selfield-tabindex.
 CONCATENATE g_t_ekpo-ebeln g_t_ekpo-ebelp INTO g_ebeln. "CRQ94538-Capture text
 SHIFT g_ebeln LEFT DELETING LEADING space.
 PERFORM read_text USING g_ebeln g_t_text[].
 IF g_t_text[] IS NOT INITIAL.
 PERFORM pop_up_with_table .
 ENDIF.
 endif.
 when 'OTHERS'.
 leave to screen 0.
endcase.
endform. "list1
FORM read_text USING p_ebeln p_t_itab LIKE g_t_text1[].
PERFORM fill_readtext USING p_ebeln 'EKPO' 'F01' p_t_itab.
ENDFORM. " f0008_read_text
FORM fill_readtext USING p_vbeln
 p_object
 p_textid
 pt_itab LIKE g_t_text[] .
DATA: ls_itab LIKE LINE OF g_t_text,
 l_header LIKE thead,
 l_tdname LIKE thead-tdname.
CLEAR pt_itab.
REFRESH pt_itab.
MOVE p_vbeln TO l_tdname.
CALL FUNCTION 'READ_TEXT'
 EXPORTING
 client = sy-mandt
 id = p_textid
 language = sy-langu
 name = l_tdname
 object = p_object
 IMPORTING
 header = l_header
 TABLES
 lines = pt_itab
 EXCEPTIONS
 id = 1
 language = 2
 name = 3
 not_found = 4
 object = 5
 reference_check = 6
 wrong_access_to_archive = 7
 OTHERS = 8.
endform. "fill_readtext
FORM pop_up_with_table .
CALL FUNCTION 'POPUP_WITH_TABLE'
 EXPORTING
 endpos_col = 82
 endpos_row = 20
 startpos_col = 10
 startpos_row = 10
 titletext = ' '
 TABLES
 valuetab = g_t_text
 EXCEPTIONS
 break_off = 1
 OTHERS = 2.
IF sy-subrc NE 0.
 CLEAR g_t_text.
ENDIF.
ENDFORM. " f4000_pop_up_with_table
FORM download .
if g_t_ekpo[] is not initial.
 loop at g_t_ekpo.
* concatenate text-001 g_t_ekpo-matnr into g_t_ekpo-matnr.
 PERFORM convert_table_to_string.
 modify g_t_ekpo.
 clear g_t_ekpo.
 endloop.
endif.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = 'C:/KKVT/TEST.XLS'
 filetype = 'ASC'
 write_field_separator = 'X'
 TABLES
 data_tab = g_t_ekpo
 EXCEPTIONS
 file_write_error = 1
 no_batch = 2
 gui_refuse_filetransfer = 3
 invalid_type = 4
 no_authority = 5
 unknown_error = 6
 header_not_allowed = 7
 separator_not_allowed = 8
 filesize_not_allowed = 9
 header_too_long = 10
 dp_error_create = 11
 dp_error_send = 12
 dp_error_write = 13
 unknown_dp_error = 14
 access_denied = 15
 dp_out_of_memory = 16
 disk_full = 17
 dp_timeout = 18
 file_not_found = 19
 dataprovider_exception = 20
 control_flush_error = 21
 OTHERS = 22.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
message: 'file downloaded' type 'S'.
ENDIF.
ENDFORM. " download
FORM convert_table_to_string .
DATA: str TYPE string,
 len TYPE i,
 tot_len TYPE i.
FIELD-SYMBOLS <fs1> TYPE ANY.
IF g_t_ekpo-ebeln IS NOT INITIAL.
 CONCATENATE g_t_ekpo-ebeln g_t_ekpo-ebelp INTO g_ebeln. "CRQ94538-Capture text
 SHIFT g_ebeln LEFT DELETING LEADING space.
 PERFORM read_text USING g_ebeln g_t_text[].
 IF g_t_text[] IS NOT INITIAL.
 CLEAR: len,
 tot_len,
 str.
 DO.
 ASSIGN COMPONENT sy-index OF STRUCTURE g_t_text TO <fs1>.
 IF sy-subrc NE 0.
 EXIT.
 ENDIF.
 DESCRIBE FIELD <fs1> LENGTH len IN CHARACTER MODE.
 ADD len TO tot_len.
 ENDDO.
 CALL FUNCTION 'CONVERT_TABLE_TO_STRING'
 EXPORTING
 i_tabline_length = tot_len
 IMPORTING
 e_string = str
 TABLES
 it_table = g_t_text[].
 IF sy-subrc = 0.
 g_t_ekpo-text = str.
 ENDIF.
 ELSE.
 CLEAR: g_t_ekpo-text,
 tot_len,
 len,
 str. .
 ENDIF.
ENDIF.
ENDFORM. " convert_table_to_string
Edited by: Kiran K on Nov 18, 2010 5:21 AM

Problem in Getting Long Text After uploading LT using CREATE_TEXT in CORS

Hi Gurus,
i am uploading long text for Reason for cancellation in CORS Transaction through CREATE_TEXT.
after uploading this text by using this FM CREATE_TEXT i am seeing the long text what ever i uploaded through CREATE_TEXT , i am unable to see first 40 characters of that long text.
if anybody faced this problem earlier please guide me to resolve this problem.
Thanks & Regards
Venkata Ramesh J

Hi,
can you please check this link
Replacing the text created in create_text
Thanks
durga.K

No long text in message after using after using DSWPNOTIFCREATE

Hi,
After creating a message by using the BSP DSWPNOTIFCREATE the long text is not visable in the message. When I display the massage in solutions manager the system Data, short text is visable in the message, but not the longtext.
Richard

Hi,
After creating a message by using the BSP DSWPNOTIFCREATE the long text is not visable in the message. When I display the massage in solutions manager the system Data, short text is visable in the message, but not the longtext.
Richard

Long text creation in custom screens

Hi
Can we add the functionality of adding a long text in the custom screen.
The long text should be same as the one which SAP provides in standard transactions.
If possible please tell me the solution.
Thanks & Regards
Kapil

HI,
yes you can add using TEXT AREA control here is the sample code.
insert a custom control area in the screen and create a object of the text editor.
check this code for PBO and PAI.
here TEDITOR is the custom contorl area name on screen
MODULE PBO OUTPUT.
IF EDITOR IS INITIAL.
* set status
SET pf-status '1111'.
* create control container
 CREATE OBJECT TextEdit_Custom_Container
 EXPORTING
 CONTAINER_NAME = 'TEDITOR'
 EXCEPTIONS
 CNTL_ERROR = 1
 CNTL_SYSTEM_ERROR = 2
 CREATE_ERROR = 3
 LIFETIME_ERROR = 4
 LIFETIME_DYNPRO_DYNPRO_LINK = 5.
 if sy-subrc ne 0.
* add your handling
 ENDif.
 mycontainer = 'TEDITOR'.
* create calls constructor, which initializes, creats and links
* TextEdit Control
 create object editor
 exporting
 parent = TextEdit_Custom_Container
 WORDWRAP_MODE =
* cl_gui_textedit=>wordwrap_off
 cl_gui_textedit=>wordwrap_at_fixed_position
* cl_gui_textedit=>WORDWRAP_AT_WINDOWBORDER
 WORDWRAP_POSITION = line_length
 wordwrap_to_linebreak_mode = cl_gui_textedit=>true.
* to handle different containers
 container_linked = 1.
 refresh mytable.
ENDIF.
ENDMODULE. " PBO OUTPUT
MODULE pai INPUT.
case ok_code.
WHEN 'SAVE'.
* retrieve table from control
clear: txt.
 call method editor->get_text_as_r3table
 importing table = mytable.
 loop at mytable into wa.
 concatenate txt wa into txt
 separated by '|'.
 endloop.
 shift txt left.
 length = strlen( txt ).
 ztext-CLUSTR = length.
 ztext-text = txt.
 modify ztext.
 clear: ztext.
 refresh: mytable.
 call method editor->set_text_as_r3table
 exporting table = mytable.
 Message s000(zwa).
when 'DISP'.
 select single * from
 ztext
 where fund = ztext-fund.
 SPLIT ztext-text AT '|' INTO TABLE mytable.
 call method editor->set_text_as_r3table
 exporting table = mytable.
endcase.
clear: ok_code.
ENDMODULE. " pai INPUT
Regards,
Wasim Ahmed

How to save long text for IA01 Transaction using BDC

Hi All,
In my requirement I have to create a Task List Equipment and Task List Functional Location using BDC.Here I need to upload the long text for both IA01 and IA11 transactions.I am using SAVE_TEXT function module to save the text and COMMIT_TEXT also after save text.But I am not able to see the text in IA12 and IA02 transactions.But using READ_TEXT I am able to get the text what updated using SAVE_TEXT.
Please answer for this if any one worked on this requirement <Priority normalized by moderator>
Thanks,
Satya.
Edited by: Vinod Kumar on Jan 2, 2012 9:02 PM

Hi Satya,
There is a simple way to update the long text. There is direct input object in the LSMW for long text.
Object : 0001
Method : 0001
Program type : D
SImply go and create the LSMW with first option and follow the steps. No need to call the function modules separately. This standard program will take care of every thing.
If you have multiple lines to populate in the equipment master at the header level then you need two set of files. Then key will be equipment number with leading zeros if it will not be alpha numeric.
1) First file with field EQUNR.
2) Second file will be
EQUNR C(018) Technical identification number
TXPARGRAPH C(002) Tag column
TXLINE C(072) Text editor text line
TEXT_MARK C(001) Description Indicator for RIIBIP00 (IBIP) Processing
Please let me know if you need more in detail.
Thanks,
Satheesh

Creation of Delivery Using IDOC without reference to order

Pls suggest is there is any way to create delivery using idoc without reference to order. This is very urgent.

Hi
Design the inbound idoc in such a way that it carries all the essential data needed to create a delivery document namely the material number, no of units to be deilvery, delivering plant, storage location, shipping point, warehouse number(if applicable) etc.
Pass all these details to the function module RV_DELIVERY_CREATE while creating delivery in VL01N and pass the document type as LO which is delivery document without reference to order.
But it is advised to have atleast a pseudo order with which we have to create the delivery document.
Pls reward points.

To Make the Long text field as required using OA Framework Personalization

Hi All
In IProcurement requisition, we have long text field called 'Justification' a long text field. I have made this field as mandatory by setting the required property as 'Yes' at site level. This works for Most of the cases. However if the user just presses Enter key and skip without entering something in this field . So how to stop the user without entering something except spaces or enterkey to proceed further.
Regards
Rajkumar

Hi,
Very Interesting question, I never thought of it.
In your case you may try to extend the controller of that page and in the controller trim the text and set that value to the text.
In other way, You can try in USER hook function : POR_CUSTOM_PKG package, check if you are getting that value.
Regards
Apurba K Saha

Trigger internal serial nos creation for inbound delivery using DELVRY03

Hi all,
I am working in ECC 6.0 I need to update serial nos in the inbound delivery. The internal serial nos. that will be generated by the system, I have to trap them for a given delivery and map it to a set of external serial nos.(length is 40 chars) and update in a Z table.
For changing the delivery, I am using idoc DELVRY03 (message SHPCON). Within the idoc I am not able to find any such field which will trigger the automatic creation of internal serial nos. In case of idoc MBGMCR03 (goods movement), there is a field E1BP2017_GM_ITEM_CREATE-SERIALNO_AUTO_NUMBERASSIGNMENT which when set to 'X', the internal serial nos are automatically generated and can be found in table SER03.
I want a similar thing for the DELVRY03 idoc. Can anyone help me on this?
If not possible through Idoc, then whats the other option?
My aim is to just get the internal serial nos created through delivery change activity.
Note - The serial no. profile cannot have the option of serial no. usage set to '04 - automatic' in SPRO as per the client's business process.
Thanks,
Shoma

Hi Shoma,
copy the FM which is assigned to your processcode and copy to ZFM and write your modifications on that ZFM.
It will resolves your problem.
Regards,
Venkat.

Delivery Split during creation of delivery using ME2O

The system creates two delivery documents for the same vendor while using transaction ME2O. There is no delivery split criteria defined in customizing

Hi,
Please check following note
546668 - FAQ: Delivery split when creating deliveries
Also check the note 355404 - Why was there a delivery split during creation?
in this note you have attached report ZLE_ANALYZE_DELIVERY_SPLIT run it in SE38,
You will come to know why two deliveries created
Thanks

Long Text creation of Delivery using DELVRY03

Similar Messages

Maybe you are looking for